From 32c472cf55a62c5dc7f473068392fdcd98694f32 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 25 Sep 2007 08:34:30 +0000 Subject: [PATCH] [brcm-2.4] fix vlan configuration on Dell TrueMobile 2300 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9015 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../linux/brcm-2.4/base-files/default/etc/init.d/netconfig | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig index 2b56963365..643ba35d31 100755 --- a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig +++ b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig @@ -47,11 +47,11 @@ start() { mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]" } } - + ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) { nvram[$1] = $2 } - + END { if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) { c["wan_ifname"] = "" @@ -61,6 +61,10 @@ start() { c["wan_ifname"] = "eth1" c["lan_ifname"] = "eth0" } + if (model == "Dell TrueMobile 2300") { + c["vlan0ports"] = "0 1 2 3 5*" + c["vlan1ports"] = "4 5" + } if (nvram["boardtype"] == "bcm94710r4") { # Toshiba WRC-1000 c["lan_ifname"] = "eth0" @@ -100,10 +104,10 @@ start() { c["lan_ifname"]="eth0" c["wan_ifname"]="" } - + # ASUS WL-700gE # These are actually same as defaults above. For some reason this script applies - # Generic BCM94704 settings instead so we revert to proper settings here. + # Generic BCM94704 settings instead so we revert to proper settings here. # Hopefully someone will fix this properly soon. if (model == "ASUS WL-700gE") { c["lan_ifname"]="eth0.0" @@ -116,7 +120,7 @@ start() { c["vlan0ports"]="0 1 2 3 5*" c["vlan1ports"]="4 5" } - + print "#### VLAN configuration " print "config switch eth0" p("vlan0", "vlan0ports") -- 2.11.0