From: juhosg Date: Fri, 10 Dec 2010 17:57:48 +0000 (+0000) Subject: ar71xx: add support for the TP-LINK TL-MR3220 v1 board X-Git-Url: https://git.archive.openwrt.org/?a=commitdiff_plain;h=ddbca99fbce13fe829c8d36fe11cdc35944280ae;p=openwrt.git ar71xx: add support for the TP-LINK TL-MR3220 v1 board git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24439 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- diff --git a/target/linux/ar71xx/base-files/etc/defconfig/tl-mr3220/network b/target/linux/ar71xx/base-files/etc/defconfig/tl-mr3220/network new file mode 100644 index 0000000000..de201bf5ec --- /dev/null +++ b/target/linux/ar71xx/base-files/etc/defconfig/tl-mr3220/network @@ -0,0 +1,24 @@ +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth0 + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 + +config interface wan + option ifname eth1 + option proto dhcp + +config switch eth0 + option enable_vlan 1 + +config switch_vlan + option device eth0 + option vlan 1 + option ports "0 1 2 3 4" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index a89ede9493..7abedc0a2f 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -81,8 +81,8 @@ get_status_led() { tew-632brp) status_led="tew-632brp:green:status" ;; - tl-mr3420) - status_led="tl-mr3420:green:system" + tl-mr3220 | tl-mr3420) + status_led="tl-mr3x20:green:system" ;; tl-wa901nd) status_led="tl-wa901nd:green:system" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index ec3aa5b62a..ae50a23c52 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -100,6 +100,9 @@ ar71xx_board_name() { *"DIR-615 rev. C1") name="dir-615-c1" ;; + *TL-MR3220) + name="tl-mr3220" + ;; *TL-MR3420) name="tl-mr3420" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 36e2b2146f..1cbde8bc66 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -75,7 +75,7 @@ platform_check_image() { } return 0 ;; - tl-mr3420 | tl-wa901nd | tl-wr741nd | tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd) + tl-mr3220 | tl-mr3420 | tl-wa901nd | tl-wr741nd | tl-wr841n-v1 | tl-wr941nd | tl-wr1043nd) [ "$magic" != "0100" ] && { echo "Invalid image type." return 1 diff --git a/target/linux/ar71xx/config-2.6.32 b/target/linux/ar71xx/config-2.6.32 index 5d21acfaac..559c800221 100644 --- a/target/linux/ar71xx/config-2.6.32 +++ b/target/linux/ar71xx/config-2.6.32 @@ -34,7 +34,7 @@ CONFIG_AR71XX_MACH_PB92=y CONFIG_AR71XX_MACH_RB4XX=y CONFIG_AR71XX_MACH_RB750=y CONFIG_AR71XX_MACH_TEW_632BRP=y -CONFIG_AR71XX_MACH_TL_MR3420=y +CONFIG_AR71XX_MACH_TL_MR3X20=y CONFIG_AR71XX_MACH_TL_WA901ND=y CONFIG_AR71XX_MACH_TL_WR1043ND=y CONFIG_AR71XX_MACH_TL_WR741ND=y diff --git a/target/linux/ar71xx/config-2.6.36 b/target/linux/ar71xx/config-2.6.36 index b2c3cd7b3b..108855f14c 100644 --- a/target/linux/ar71xx/config-2.6.36 +++ b/target/linux/ar71xx/config-2.6.36 @@ -30,7 +30,7 @@ CONFIG_AR71XX_MACH_PB92=y CONFIG_AR71XX_MACH_RB4XX=y CONFIG_AR71XX_MACH_RB750=y CONFIG_AR71XX_MACH_TEW_632BRP=y -CONFIG_AR71XX_MACH_TL_MR3420=y +CONFIG_AR71XX_MACH_TL_MR3X20=y CONFIG_AR71XX_MACH_TL_WA901ND=y CONFIG_AR71XX_MACH_TL_WR1043ND=y CONFIG_AR71XX_MACH_TL_WR741ND=y diff --git a/target/linux/ar71xx/config-2.6.37 b/target/linux/ar71xx/config-2.6.37 index b2c3cd7b3b..108855f14c 100644 --- a/target/linux/ar71xx/config-2.6.37 +++ b/target/linux/ar71xx/config-2.6.37 @@ -30,7 +30,7 @@ CONFIG_AR71XX_MACH_PB92=y CONFIG_AR71XX_MACH_RB4XX=y CONFIG_AR71XX_MACH_RB750=y CONFIG_AR71XX_MACH_TEW_632BRP=y -CONFIG_AR71XX_MACH_TL_MR3420=y +CONFIG_AR71XX_MACH_TL_MR3X20=y CONFIG_AR71XX_MACH_TL_WA901ND=y CONFIG_AR71XX_MACH_TL_WR1043ND=y CONFIG_AR71XX_MACH_TL_WR741ND=y diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig index 87c59046cc..3524dfe6b8 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig @@ -183,8 +183,8 @@ config AR71XX_MACH_NBG460N select AR71XX_DEV_LEDS_GPIO default n -config AR71XX_MACH_TL_MR3420 - bool "TP-LINK TL-MR3420 support" +config AR71XX_MACH_TL_MR3X20 + bool "TP-LINK TL-MR3220/3420 support" select AR71XX_DEV_M25P80 select AR71XX_DEV_AP91_PCI if PCI select AR71XX_DEV_GPIO_BUTTONS diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile index f6ceb0a98f..b5b971a781 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile @@ -45,7 +45,7 @@ obj-$(CONFIG_AR71XX_MACH_PB92) += mach-pb92.o obj-$(CONFIG_AR71XX_MACH_RB4XX) += mach-rb4xx.o obj-$(CONFIG_AR71XX_MACH_RB750) += mach-rb750.o obj-$(CONFIG_AR71XX_MACH_TEW_632BRP) += mach-tew-632brp.o -obj-$(CONFIG_AR71XX_MACH_TL_MR3420) += mach-tl-mr3420.o +obj-$(CONFIG_AR71XX_MACH_TL_MR3X20) += mach-tl-mr3x20.o obj-$(CONFIG_AR71XX_MACH_TL_WA901ND) += mach-tl-wa901nd.o obj-$(CONFIG_AR71XX_MACH_TL_WR741ND) += mach-tl-wr741nd.o obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-mr3420.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-mr3420.c deleted file mode 100644 index c1888cac84..0000000000 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-mr3420.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * TP-LINK TL-MR3420 board support - * - * Copyright (C) 2010 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include -#include -#include - -#include - -#include "machtype.h" -#include "devices.h" -#include "dev-m25p80.h" -#include "dev-ap91-pci.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-usb.h" - -#define TL_MR3420_GPIO_LED_QSS 0 -#define TL_MR3420_GPIO_LED_SYSTEM 1 -#define TL_MR3420_GPIO_LED_3G 8 - -#define TL_MR3420_GPIO_BTN_RESET 11 -#define TL_MR3420_GPIO_BTN_QSS 12 - -#define TL_MR3420_GPIO_USB_POWER 6 - -#define TL_MR3420_BUTTONS_POLL_INTERVAL 20 - -#ifdef CONFIG_MTD_PARTITIONS -static struct mtd_partition tl_mr3420_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "kernel", - .offset = 0x020000, - .size = 0x140000, - }, { - .name = "rootfs", - .offset = 0x160000, - .size = 0x290000, - }, { - .name = "art", - .offset = 0x3f0000, - .size = 0x010000, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "firmware", - .offset = 0x020000, - .size = 0x3d0000, - } -}; -#define tl_mr3420_num_partitions ARRAY_SIZE(tl_mr3420_partitions) -#else -#define tl_mr3420_partitions NULL -#define tl_mr3420_num_partitions 0 -#endif /* CONFIG_MTD_PARTITIONS */ - -static struct flash_platform_data tl_mr3420_flash_data = { - .parts = tl_mr3420_partitions, - .nr_parts = tl_mr3420_num_partitions, -}; - -static struct gpio_led tl_mr3420_leds_gpio[] __initdata = { - { - .name = "tl-mr3420:green:system", - .gpio = TL_MR3420_GPIO_LED_SYSTEM, - .active_low = 1, - }, { - .name = "tl-mr3420:green:qss", - .gpio = TL_MR3420_GPIO_LED_QSS, - .active_low = 1, - }, { - .name = "tl-mr3420:green:3g", - .gpio = TL_MR3420_GPIO_LED_3G, - .active_low = 1, - } -}; - -static struct gpio_button tl_mr3420_gpio_buttons[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .threshold = 3, - .gpio = TL_MR3420_GPIO_BTN_RESET, - .active_low = 1, - }, { - .desc = "qss", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .threshold = 3, - .gpio = TL_MR3420_GPIO_BTN_QSS, - .active_low = 1, - } -}; - -static void __init tl_mr3420_setup(void) -{ - u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - - /* enable power for the USB port */ - gpio_request(TL_MR3420_GPIO_USB_POWER, "USB power"); - gpio_direction_output(TL_MR3420_GPIO_USB_POWER, 1); - - ar71xx_add_device_m25p80(&tl_mr3420_flash_data); - - ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3420_leds_gpio), - tl_mr3420_leds_gpio); - - ar71xx_add_device_gpio_buttons(-1, TL_MR3420_BUTTONS_POLL_INTERVAL, - ARRAY_SIZE(tl_mr3420_gpio_buttons), - tl_mr3420_gpio_buttons); - - ar71xx_eth1_data.has_ar7240_switch = 1; - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); - - /* WAN port */ - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth0_data.speed = SPEED_100; - ar71xx_eth0_data.duplex = DUPLEX_FULL; - - /* LAN ports */ - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.speed = SPEED_1000; - ar71xx_eth1_data.duplex = DUPLEX_FULL; - - ar71xx_add_device_mdio(0x0); - ar71xx_add_device_eth(1); - ar71xx_add_device_eth(0); - - ar71xx_add_device_usb(); - - ap91_pci_init(ee, mac); -} -MIPS_MACHINE(AR71XX_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420", - tl_mr3420_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-mr3x20.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-mr3x20.c new file mode 100644 index 0000000000..db415597eb --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-mr3x20.c @@ -0,0 +1,151 @@ +/* + * TP-LINK TL-MR3220/3420 board support + * + * Copyright (C) 2010 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include + +#include + +#include "machtype.h" +#include "devices.h" +#include "dev-m25p80.h" +#include "dev-ap91-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define TL_MR3X20_GPIO_LED_QSS 0 +#define TL_MR3X20_GPIO_LED_SYSTEM 1 +#define TL_MR3X20_GPIO_LED_3G 8 + +#define TL_MR3X20_GPIO_BTN_RESET 11 +#define TL_MR3X20_GPIO_BTN_QSS 12 + +#define TL_MR3X20_GPIO_USB_POWER 6 + +#define TL_MR3X20_BUTTONS_POLL_INTERVAL 20 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition tl_mr3x20_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "kernel", + .offset = 0x020000, + .size = 0x140000, + }, { + .name = "rootfs", + .offset = 0x160000, + .size = 0x290000, + }, { + .name = "art", + .offset = 0x3f0000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x020000, + .size = 0x3d0000, + } +}; +#define tl_mr3x20_num_partitions ARRAY_SIZE(tl_mr3x20_partitions) +#else +#define tl_mr3x20_partitions NULL +#define tl_mr3x20_num_partitions 0 +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct flash_platform_data tl_mr3x20_flash_data = { + .parts = tl_mr3x20_partitions, + .nr_parts = tl_mr3x20_num_partitions, +}; + +static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = { + { + .name = "tl-mr3x20:green:system", + .gpio = TL_MR3X20_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tl-mr3x20:green:qss", + .gpio = TL_MR3X20_GPIO_LED_QSS, + .active_low = 1, + }, { + .name = "tl-mr3x20:green:3g", + .gpio = TL_MR3X20_GPIO_LED_3G, + .active_low = 1, + } +}; + +static struct gpio_button tl_mr3x20_gpio_buttons[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 3, + .gpio = TL_MR3X20_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "qss", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .threshold = 3, + .gpio = TL_MR3X20_GPIO_BTN_QSS, + .active_low = 1, + } +}; + +static void __init tl_mr3x20_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + /* enable power for the USB port */ + gpio_request(TL_MR3X20_GPIO_USB_POWER, "USB power"); + gpio_direction_output(TL_MR3X20_GPIO_USB_POWER, 1); + + ar71xx_add_device_m25p80(&tl_mr3x20_flash_data); + + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio), + tl_mr3x20_leds_gpio); + + ar71xx_add_device_gpio_buttons(-1, TL_MR3X20_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(tl_mr3x20_gpio_buttons), + tl_mr3x20_gpio_buttons); + + ar71xx_eth1_data.has_ar7240_switch = 1; + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); + + /* WAN port */ + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.speed = SPEED_100; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + + /* LAN ports */ + ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth1_data.speed = SPEED_1000; + ar71xx_eth1_data.duplex = DUPLEX_FULL; + + ar71xx_add_device_mdio(0x0); + ar71xx_add_device_eth(1); + ar71xx_add_device_eth(0); + + ar71xx_add_device_usb(); + + ap91_pci_init(ee, mac); +} +MIPS_MACHINE(AR71XX_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420", + tl_mr3x20_setup); + +MIPS_MACHINE(AR71XX_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220", + tl_mr3x20_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h index ec35677be2..620e009677 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h @@ -38,6 +38,7 @@ enum ar71xx_mach_type { AR71XX_MACH_MZK_W300NH, /* Planex MZK-W300NH */ AR71XX_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ + AR71XX_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */ AR71XX_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */ AR71XX_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ diff --git a/target/linux/ar71xx/generic/profiles/tp-link.mk b/target/linux/ar71xx/generic/profiles/tp-link.mk index 890e4b28a8..a36e1756f6 100644 --- a/target/linux/ar71xx/generic/profiles/tp-link.mk +++ b/target/linux/ar71xx/generic/profiles/tp-link.mk @@ -5,6 +5,17 @@ # See /LICENSE for more information. # +define Profile/TLMR3220V1 + NAME:=TP-LINK TL-MR3220 v1 + PACKAGES:=kmod-ath9k wpad-mini kmod-usb-core kmod-usb2 +endef + +define Profile/TLMR3220V1/Description + Package set optimized for the TP-LINK TL-MR3220 v1. +endef + +$(eval $(call Profile,TLMR3220V1)) + define Profile/TLMR3420V1 NAME:=TP-LINK TL-MR3420 v1 PACKAGES:=kmod-ath9k wpad-mini kmod-usb-core kmod-usb2 diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 44c030e4e0..66be14b48f 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -570,6 +570,10 @@ define Image/Build/Profile/NBG_460N_550N_550NH $(call Image/Build/Template/$(fs_64k)/$(1),ZyXEL,nbg460n_550n_550nh,board=NBG460N,NBG-460N) endef +define Image/Build/Profile/TLMR3220V1 + $(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-mr3220-v1,board=TL-MR3220,TL-MR3220v1) +endef + define Image/Build/Profile/TLMR3420V1 $(call Image/Build/Template/$(fs_4k)/$(1),TPLINK,tl-mr3420-v1,board=TL-MR3420,TL-MR3420v1) endef @@ -664,6 +668,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/PB92,$(1)) $(call Image/Build/Profile/TEW632BRP,$(1)) $(call Image/Build/Profile/TEW652BRP,$(1)) + $(call Image/Build/Profile/TLMR3220V1,$(1)) $(call Image/Build/Profile/TLMR3420V1,$(1)) $(call Image/Build/Profile/TLWA901NDV1,$(1)) $(call Image/Build/Profile/TLWR741NDV1,$(1))