From: John Crispin Date: Tue, 1 Mar 2016 08:14:53 +0000 (+0000) Subject: ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link TL-WR841N/ND... X-Git-Url: https://git.archive.openwrt.org/?a=commitdiff_plain;h=da2592c20e4ac478ab875fceb588eeaf1648066b;p=15.05%2Fopenwrt.git ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link TL-WR841N/ND v9, Compex WPJ531) The initialization routines for these boards were relying on some (wrong) defaults for the QCA953x ethernet. Make these defaults explicit to prevent breaking them when the QCA953x defaults are fixed. Signed-off-by: Matthias Schiffer Backport of r46206 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48853 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c index c28afc6ceb..3e5c2a2522 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c @@ -109,12 +109,18 @@ static void __init tl_ap143_setup(void) ath79_register_mdio(0, 0x0); /* LAN */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_switch_data.phy_poll_mask |= BIT(4); ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); ath79_register_eth(1); /* WAN */ ath79_switch_data.phy4_mii_en = 1; ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.phy_mask = BIT(4); ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); ath79_register_eth(0); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c index bc13d7019f..e665a2e993 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c @@ -105,12 +105,19 @@ static void __init common_setup(void) ath79_register_mdio(0, 0x0); /* LAN */ + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.phy_mask = BIT(4); ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); ath79_register_eth(0); /* WAN */ ath79_switch_data.phy4_mii_en = 1; + ath79_eth1_data.duplex = DUPLEX_FULL; ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth1_data.speed = SPEED_100; + ath79_switch_data.phy_poll_mask |= BIT(4); ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); ath79_register_eth(1);