X-Git-Url: https://git.archive.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FUR-326N4G.dts;h=b95eaf02074d794688077d704387058f1b497548;hb=41e6ca40e4f4f9e8962653358bc49b4385ce52a2;hp=6bb360d9d7525f32e3544cb5f796218cfac3e076;hpb=5d772fb05af1af8abb503bb6a4336cf9b535c441;p=openwrt.git diff --git a/target/linux/ramips/dts/UR-326N4G.dts b/target/linux/ramips/dts/UR-326N4G.dts index 6bb360d9d7..b95eaf0207 100644 --- a/target/linux/ramips/dts/UR-326N4G.dts +++ b/target/linux/ramips/dts/UR-326N4G.dts @@ -4,25 +4,20 @@ / { compatible = "UR-326N4G", "ralink,rt3052-soc"; - model = "UR-326N4G Wireless N router"; - - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; - ralink,gpiomux = "mdio"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + model = "UPVEL UR-326N4G"; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; cfi@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; - bank-width = <2>; device-width = <2>; #address-cells = <1>; @@ -53,34 +48,42 @@ }; ethernet@10100000 { - status = "okay"; + mtd-mac-address = <&factory 0x4004>; }; esw@10110000 { - status = "okay"; - ralink,portmap = <0x2f>; + mediatek,portmap = <0x2f>; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; }; gpio-leds { compatible = "gpio-leds"; + 3g { - label = "ur326:green:3g"; + label = "ur-326n4g:green:3g"; gpios = <&gpio0 9 1>; }; + gateway { - label = "ur326:green:gateway"; + label = "ur-326n4g:green:gateway"; gpios = <&gpio0 11 1>; }; + ap { - label = "ur326:green:ap"; + label = "ur-326n4g:green:ap"; gpios = <&gpio0 12 1>; }; + wps { - label = "ur326:green:wps"; + label = "ur-326n4g:green:wps"; gpios = <&gpio0 14 1>; }; + station { - label = "ur326:green:station"; + label = "ur-326n4g:green:station"; gpios = <&gpio0 13 1>; }; }; @@ -90,11 +93,13 @@ #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; + reset_wps { label = "reset_wps"; gpios = <&gpio0 10 1>; linux,code = <0x198>; }; + mode { label = "mode"; gpios = <&gpio0 7 1>; @@ -102,10 +107,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; };