X-Git-Url: https://git.archive.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FDIR-600-B1.dts;h=17903793ee76d377e7575881a26cada92d50b7eb;hb=0435a4402e07ae13324afa759e56395f73ecb32d;hp=555433faad297524c864e12f61f1166645dd413f;hpb=673f5934497dbae5f876d634d538eac4f0c99273;p=openwrt.git diff --git a/target/linux/ramips/dts/DIR-600-B1.dts b/target/linux/ramips/dts/DIR-600-B1.dts index 555433faad..17903793ee 100644 --- a/target/linux/ramips/dts/DIR-600-B1.dts +++ b/target/linux/ramips/dts/DIR-600-B1.dts @@ -3,28 +3,15 @@ /include/ "rt3050.dtsi" / { - #address-cells = <1>; - #size-cells = <1>; compatible = "DIR-600-B1", "ralink,rt3050-soc"; model = "D-Link DIR-600 B1"; - memorydetect { - ralink,memory = <0x0 0x200000 0x4000000>; - }; - - chosen { - bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)"; - }; - - palmbus@10000000 { - sysc@0 { - ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf"; + ralink,function = "gpio"; + }; }; }; @@ -36,17 +23,43 @@ device-width = <2>; #address-cells = <1>; #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + devdata: partition@30000 { + label = "devdata"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "devconf"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; }; ethernet@10100000 { - status = "okay"; + mtd-mac-address = <&factory 0x4004>; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; + wmac@10180000 { + ralink,mtd-eeprom = <&devdata 0x4000>; + }; + gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -64,10 +77,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - gpio-leds { compatible = "gpio-leds"; status {