X-Git-Url: https://git.archive.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fmvebu%2Fpatches-4.0%2F001-add_mamba_support.patch;fp=target%2Flinux%2Fmvebu%2Fpatches-4.0%2F001-add_mamba_support.patch;h=0000000000000000000000000000000000000000;hb=a7bea11085c99c96e55f06e425bd695948afa743;hp=305479acfb92c69c480c231a3e24e3407d812e41;hpb=1bb873c7d5929eb0c60c5b611e880f443ed90f5f;p=15.05%2Fopenwrt.git diff --git a/target/linux/mvebu/patches-4.0/001-add_mamba_support.patch b/target/linux/mvebu/patches-4.0/001-add_mamba_support.patch deleted file mode 100644 index 305479acfb..0000000000 --- a/target/linux/mvebu/patches-4.0/001-add_mamba_support.patch +++ /dev/null @@ -1,388 +0,0 @@ -From 4824140f4bd1caaf900215aabe27e4bdd1677704 Mon Sep 17 00:00:00 2001 -From: Imre Kaloz -Date: Mon, 16 Feb 2015 13:31:04 +0100 -Subject: [PATCH] ARM: mvebu: add Linksys WRT1900AC (Mamba) support - -The Linksys WRT1900AC (Mamba) is a router that has - -- 2 mini-PCIe slots with Marvell 88W8864 radios -- 1 USB 3.0 port -- 1 USB 2.0/eSATAp port -- 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN) -- 128MB NAND flash -- 256MB RAM - -gregory.clement@free-electrons.com: - add ARM to the title - - fix the reference to CONFIG_DEBUG_MVEBU_UART0_ALTERNATE - - fix the unbalanced comment for the syscfg partition - -Signed-off-by: Imre Kaloz -Acked-by: Gregory CLEMENT -Signed-off-by: Gregory CLEMENT ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 348 ++++++++++++++++++++++++++ - 2 files changed, 349 insertions(+) - create mode 100644 arch/arm/boot/dts/armada-xp-linksys-mamba.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -629,6 +629,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ - armada-xp-db.dtb \ - armada-xp-gp.dtb \ - armada-xp-lenovo-ix4-300d.dtb \ -+ armada-xp-linksys-mamba.dtb \ - armada-xp-matrix.dtb \ - armada-xp-netgear-rn2120.dtb \ - armada-xp-openblocks-ax3-4.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts -@@ -0,0 +1,348 @@ -+/* -+ * Device Tree file for the Linksys WRT1900AC (Mamba). -+ * -+ * Note: this board is shipped with a new generation boot loader that -+ * remaps internal registers at 0xf1000000. Therefore, if earlyprintk -+ * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option should be -+ * used. -+ * -+ * Copyright (C) 2014 Imre Kaloz -+ * -+ * Based on armada-xp-axpwifiap.dts: -+ * -+ * Copyright (C) 2013 Marvell -+ * -+ * Thomas Petazzoni -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include -+#include -+#include "armada-xp-mv78230.dtsi" -+ -+/ { -+ model = "Linksys WRT1900AC"; -+ compatible = "linksys,mamba", "marvell,armadaxp-mv78230", -+ "marvell,armadaxp", "marvell,armada-370-xp"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ stdout-path = &uart0; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */ -+ }; -+ -+ soc { -+ ranges = ; -+ -+ pcie-controller { -+ status = "okay"; -+ -+ /* Etron EJ168 USB 3.0 controller */ -+ pcie@1,0 { -+ /* Port 0, Lane 0 */ -+ status = "okay"; -+ }; -+ -+ /* First mini-PCIe port */ -+ pcie@2,0 { -+ /* Port 0, Lane 1 */ -+ status = "okay"; -+ }; -+ -+ /* Second mini-PCIe port */ -+ pcie@3,0 { -+ /* Port 0, Lane 3 */ -+ status = "okay"; -+ }; -+ }; -+ -+ internal-regs { -+ -+ /* J10: VCC, NC, RX, NC, TX, GND */ -+ serial@12000 { -+ status = "okay"; -+ }; -+ -+ sata@a0000 { -+ nr-ports = <1>; -+ status = "okay"; -+ }; -+ -+ ethernet@70000 { -+ pinctrl-0 = <&ge0_rgmii_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ phy-mode = "rgmii-id"; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ ethernet@74000 { -+ pinctrl-0 = <&ge1_rgmii_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ phy-mode = "rgmii-id"; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ /* USB part of the eSATA/USB 2.0 port */ -+ usb@50000 { -+ status = "okay"; -+ }; -+ -+ i2c@11000 { -+ status = "okay"; -+ clock-frequency = <100000>; -+ -+ tmp421@4c { -+ compatible = "ti,tmp421"; -+ reg = <0x4c>; -+ }; -+ -+ tlc59116@68 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ #gpio-cells = <2>; -+ compatible = "ti,tlc59116"; -+ reg = <0x68>; -+ -+ wan_amber@0 { -+ label = "mamba:amber:wan"; -+ reg = <0x0>; -+ }; -+ -+ wan_white@1 { -+ label = "mamba:white:wan"; -+ reg = <0x1>; -+ }; -+ -+ wlan_2g@2 { -+ label = "mamba:white:wlan_2g"; -+ reg = <0x2>; -+ }; -+ -+ wlan_5g@3 { -+ label = "mamba:white:wlan_5g"; -+ reg = <0x3>; -+ }; -+ -+ esata@4 { -+ label = "mamba:white:esata"; -+ reg = <0x4>; -+ }; -+ -+ usb2@5 { -+ label = "mamba:white:usb2"; -+ reg = <0x5>; -+ }; -+ -+ usb3_1@6 { -+ label = "mamba:white:usb3_1"; -+ reg = <0x6>; -+ }; -+ -+ usb3_2@7 { -+ label = "mamba:white:usb3_2"; -+ reg = <0x7>; -+ }; -+ -+ wps_white@8 { -+ label = "mamba:white:wps"; -+ reg = <0x8>; -+ }; -+ -+ wps_amber@9 { -+ label = "mamba:amber:wps"; -+ reg = <0x9>; -+ }; -+ }; -+ }; -+ -+ nand@d0000 { -+ status = "okay"; -+ num-cs = <1>; -+ marvell,nand-keep-config; -+ marvell,nand-enable-arbiter; -+ nand-on-flash-bbt; -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ -+ partition@0 { -+ label = "u-boot"; -+ reg = <0x0000000 0x100000>; /* 1MB */ -+ read-only; -+ }; -+ -+ partition@100000 { -+ label = "u_env"; -+ reg = <0x100000 0x40000>; /* 256KB */ -+ }; -+ -+ partition@140000 { -+ label = "s_env"; -+ reg = <0x140000 0x40000>; /* 256KB */ -+ }; -+ -+ partition@900000 { -+ label = "devinfo"; -+ reg = <0x900000 0x100000>; /* 1MB */ -+ read-only; -+ }; -+ -+ /* kernel1 overlaps with rootfs1 by design */ -+ partition@a00000 { -+ label = "kernel1"; -+ reg = <0xa00000 0x2800000>; /* 40MB */ -+ }; -+ -+ partition@d00000 { -+ label = "rootfs1"; -+ reg = <0xd00000 0x2500000>; /* 37MB */ -+ }; -+ -+ /* kernel2 overlaps with rootfs2 by design */ -+ partition@3200000 { -+ label = "kernel2"; -+ reg = <0x3200000 0x2800000>; /* 40MB */ -+ }; -+ -+ partition@3500000 { -+ label = "rootfs2"; -+ reg = <0x3500000 0x2500000>; /* 37MB */ -+ }; -+ -+ /* -+ * 38MB, last MB is for the BBT, not writable -+ */ -+ partition@5a00000 { -+ label = "syscfg"; -+ reg = <0x5a00000 0x2600000>; -+ }; -+ -+ /* -+ * Unused area between "s_env" and "devinfo". -+ * Moved here because otherwise the renumbered -+ * partitions would break the bootloader -+ * supplied bootargs -+ */ -+ partition@180000 { -+ label = "unused_area"; -+ reg = <0x180000 0x780000>; /* 7.5MB */ -+ }; -+ }; -+ -+ spi0: spi@10600 { -+ status = "okay"; -+ -+ spi-flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "everspin,mr25h256"; -+ reg = <0>; /* Chip select 0 */ -+ spi-max-frequency = <40000000>; -+ }; -+ }; -+ }; -+ }; -+ -+ gpio_keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ pinctrl-0 = <&keys_pin>; -+ pinctrl-names = "default"; -+ -+ button@1 { -+ label = "WPS"; -+ linux,code = ; -+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ button@2 { -+ label = "Factory Reset Button"; -+ linux,code = ; -+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ pinctrl-0 = <&power_led_pin>; -+ pinctrl-names = "default"; -+ -+ power { -+ label = "mamba:white:power"; -+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; -+ }; -+ }; -+ -+ gpio_fan { -+ /* SUNON HA4010V4-0000-C99 */ -+ compatible = "gpio-fan"; -+ gpios = <&gpio0 24 0>; -+ -+ gpio-fan,speed-map = <0 0 -+ 4500 1>; -+ }; -+}; -+ -+&pinctrl { -+ -+ keys_pin: keys-pin { -+ marvell,pins = "mpp32", "mpp33"; -+ marvell,function = "gpio"; -+ }; -+ -+ power_led_pin: power-led-pin { -+ marvell,pins = "mpp40"; -+ marvell,function = "gpio"; -+ }; -+ -+ gpio_fan_pin: gpio-fan-pin { -+ marvell,pins = "mpp24"; -+ marvell,function = "gpio"; -+ }; -+};