X-Git-Url: https://git.archive.openwrt.org/?a=blobdiff_plain;f=target%2Flinux%2Fadm5120%2Ffiles%2Farch%2Fmips%2Fadm5120%2Fzyxel%2Fp-33x.c;fp=target%2Flinux%2Fadm5120%2Ffiles%2Farch%2Fmips%2Fadm5120%2Fzyxel%2Fp-33x.c;h=0000000000000000000000000000000000000000;hb=57a3eb31a2a14cd25099c0e1e3569b2c75a9e38e;hp=2626cf9eec741ca5c7311df6c8d8b301a611805d;hpb=5abdc7904ba9140f406bf5ed17543d99b4a64d3a;p=15.05%2Fopenwrt.git

diff --git a/target/linux/adm5120/files/arch/mips/adm5120/zyxel/p-33x.c b/target/linux/adm5120/files/arch/mips/adm5120/zyxel/p-33x.c
deleted file mode 100644
index 2626cf9eec..0000000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/zyxel/p-33x.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- *  ZyXEL Prestige P-33x boards support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "p-33x.h"
-
-#include <prom/zynos.h>
-
-#define P33X_GPIO_FLASH_A20	ADM5120_GPIO_PIN5
-static struct mtd_partition p33x_partitions[] = {
-	{
-		.name	= "bootbase",
-		.offset	= 0,
-		.size	= 16*1024,
-		.mask_flags = MTD_WRITEABLE,
-	} , {
-		.name	= "rom",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 16*1024,
-		.mask_flags = MTD_WRITEABLE,
-	} , {
-		.name	= "bootext1",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 32*1024,
-	} , {
-		.name	= "bootext2",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= 64*1024,
-	} , {
-		.name	= "trx",
-		.offset	= MTDPART_OFS_APPEND,
-		.size	= MTDPART_SIZ_FULL,
-	} , {
-		.name	= "firmware",
-		.offset	= 32*1024,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct adm5120_pci_irq p33x_pci_irqs[] __initdata = {
-	PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static u8 p33x_vlans[6] __initdata = {
-	/* FIXME: untested */
-	0x50, 0x48, 0x44, 0x42, 0x41, 0x00
-};
-
-static void switch_bank_gpio5(unsigned bank)
-{
-	switch (bank) {
-	case 0:
-		gpio_set_value(P33X_GPIO_FLASH_A20, 0);
-		break;
-	case 1:
-		gpio_set_value(P33X_GPIO_FLASH_A20, 1);
-		break;
-	}
-}
-
-void __init p33x_generic_setup(void)
-{
-	/* setup data for flash0 device */
-	gpio_request(P33X_GPIO_FLASH_A20, NULL); /* for flash A20 line */
-	gpio_direction_output(P33X_GPIO_FLASH_A20, 0);
-	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-	adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions);
-	adm5120_flash0_data.parts = p33x_partitions;
-	adm5120_add_device_flash(0);
-
-	adm5120_add_device_uart(0);
-	adm5120_add_device_uart(1);
-
-	adm5120_setup_eth_macs(bootbase_info.mac);
-	adm5120_add_device_switch(6, p33x_vlans);
-
-	adm5120_pci_set_irq_map(ARRAY_SIZE(p33x_pci_irqs), p33x_pci_irqs);
-}