X-Git-Url: https://git.archive.openwrt.org/?a=blobdiff_plain;f=package%2Fboot%2Fuboot-xburst%2Ffiles%2Fcpu%2Fmips%2Fmmc_protocol.h;fp=package%2Fboot%2Fuboot-xburst%2Ffiles%2Fcpu%2Fmips%2Fmmc_protocol.h;h=0000000000000000000000000000000000000000;hb=a2763ca68d07fd90264a1f859b9c8d5da663a8be;hp=ebd59125b64a750744c09ab4d5d52c1220b3ffb7;hpb=41c32f9c525b5b5a4b44bd7a685eb4e46015a9c4;p=openwrt.git diff --git a/package/boot/uboot-xburst/files/cpu/mips/mmc_protocol.h b/package/boot/uboot-xburst/files/cpu/mips/mmc_protocol.h deleted file mode 100644 index ebd59125b6..0000000000 --- a/package/boot/uboot-xburst/files/cpu/mips/mmc_protocol.h +++ /dev/null @@ -1,273 +0,0 @@ -/* -********************************************************************** -* -* uC/MMC -* -* (c) Copyright 2005 - 2007, Ingenic Semiconductor, Inc -* All rights reserved. -* -*********************************************************************** - ----------------------------------------------------------------------- -File : mmc_protocol.h -Purpose : MMC protocol definitions. - ----------------------------------------------------------------------- -Version-Date-----Author-Explanation ----------------------------------------------------------------------- -1.00.00 20060831 WeiJianli First release - ----------------------------------------------------------------------- -Known problems or limitations with current version ----------------------------------------------------------------------- -(none) ----------------------------END-OF-HEADER------------------------------ -*/ - -#ifndef __MMC_PROTOCOL__ -#define __MMC_PROTOCOL__ - -/* Standard MMC/SD clock speeds */ -#define MMC_CLOCK_SLOW 400000 /* 400 kHz for initial setup */ -#define MMC_CLOCK_FAST 20000000 /* 20 MHz for maximum for normal operation */ -#define SD_CLOCK_FAST 24000000 /* 24 MHz for SD Cards */ - -/* Extra MMC commands for state control */ -/* Use negative numbers to disambiguate */ -#define MMC_CIM_RESET -1 - -/* Standard MMC commands (3.1) type argument response */ - /* class 1 */ -#define MMC_GO_IDLE_STATE 0 /* bc */ -#define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */ -#define MMC_ALL_SEND_CID 2 /* bcr R2 */ -#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */ -#define MMC_SET_DSR 4 /* bc [31:16] RCA */ -#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */ -#define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */ -#define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */ -#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */ -#define MMC_STOP_TRANSMISSION 12 /* ac R1b */ -#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */ -#define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */ - - /* class 2 */ -#define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */ -#define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */ -#define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */ - - /* class 3 */ -#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */ - - /* class 4 */ -#define MMC_SET_BLOCK_COUNT 23 /* adtc [31:0] data addr R1 */ -#define MMC_WRITE_BLOCK 24 /* adtc [31:0] data addr R1 */ -#define MMC_WRITE_MULTIPLE_BLOCK 25 /* adtc R1 */ -#define MMC_PROGRAM_CID 26 /* adtc R1 */ -#define MMC_PROGRAM_CSD 27 /* adtc R1 */ - - /* class 6 */ -#define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */ -#define MMC_CLR_WRITE_PROT 29 /* ac [31:0] data addr R1b */ -#define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */ - - /* class 5 */ -#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */ -#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */ -#define MMC_ERASE 37 /* ac R1b */ - - /* class 9 */ -#define MMC_FAST_IO 39 /* ac R4 */ -#define MMC_GO_IRQ_STATE 40 /* bcr R5 */ - - /* class 7 */ -#define MMC_LOCK_UNLOCK 42 /* adtc R1b */ - - /* class 8 */ -#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */ -#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1b */ - - /* SD class */ -#define SD_SEND_OP_COND 41 /* bcr [31:0] OCR R3 */ -#define SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */ -#define SEND_SCR 51 /* adtc [31:0] staff R1 */ - -/* Don't change the order of these; they are used in dispatch tables */ -enum mmc_rsp_t { - RESPONSE_NONE = 0, - RESPONSE_R1 = 1, - RESPONSE_R1B = 2, - RESPONSE_R2_CID = 3, - RESPONSE_R2_CSD = 4, - RESPONSE_R3 = 5, - RESPONSE_R4 = 6, - RESPONSE_R5 = 7, - RESPONSE_R6 = 8, -}; - - -/* - MMC status in R1 - Type - e : error bit - s : status bit - r : detected and set for the actual command response - x : detected and set during command execution. the host must poll - the card by sending status command in order to read these bits. - Clear condition - a : according to the card state - b : always related to the previous command. Reception of - a valid command will clear it (with a delay of one command) - c : clear by read - */ - -#define R1_OUT_OF_RANGE (1 << 31) /* er, c */ -#define R1_ADDRESS_ERROR (1 << 30) /* erx, c */ -#define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */ -#define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */ -#define R1_ERASE_PARAM (1 << 27) /* ex, c */ -#define R1_WP_VIOLATION (1 << 26) /* erx, c */ -#define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */ -#define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */ -#define R1_COM_CRC_ERROR (1 << 23) /* er, b */ -#define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */ -#define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */ -#define R1_CC_ERROR (1 << 20) /* erx, c */ -#define R1_ERROR (1 << 19) /* erx, c */ -#define R1_UNDERRUN (1 << 18) /* ex, c */ -#define R1_OVERRUN (1 << 17) /* ex, c */ -#define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */ -#define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */ -#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */ -#define R1_ERASE_RESET (1 << 13) /* sr, c */ -#define R1_STATUS(x) (x & 0xFFFFE000) -#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */ -#define R1_READY_FOR_DATA (1 << 8) /* sx, a */ -#define R1_APP_CMD (1 << 7) /* sr, c */ - -enum card_state { - CARD_STATE_EMPTY = -1, - CARD_STATE_IDLE = 0, - CARD_STATE_READY = 1, - CARD_STATE_IDENT = 2, - CARD_STATE_STBY = 3, - CARD_STATE_TRAN = 4, - CARD_STATE_DATA = 5, - CARD_STATE_RCV = 6, - CARD_STATE_PRG = 7, - CARD_STATE_DIS = 8, -}; - -/* These are unpacked versions of the actual responses */ - - struct mmc_response_r1 { - u8 cmd; - u32 status; -}; - -typedef struct mmc_cid { - u8 mid; - u16 oid; - u8 pnm[7]; /* Product name (we null-terminate) */ - u8 prv; - u32 psn; - u8 mdt; -}mmc_cid_t; - -typedef struct mmc_csd { - u8 csd_structure; - u8 spec_vers; - u8 taac; - u8 nsac; - u8 tran_speed; - u16 ccc; - u8 read_bl_len; - u8 read_bl_partial; - u8 write_blk_misalign; - u8 read_blk_misalign; - u8 dsr_imp; - u16 c_size; - u8 vdd_r_curr_min; - u8 vdd_r_curr_max; - u8 vdd_w_curr_min; - u8 vdd_w_curr_max; - u8 c_size_mult; - union { - struct { /* MMC system specification version 3.1 */ - u8 erase_grp_size; - u8 erase_grp_mult; - } v31; - struct { /* MMC system specification version 2.2 */ - u8 sector_size; - u8 erase_grp_size; - } v22; - } erase; - u8 wp_grp_size; - u8 wp_grp_enable; - u8 default_ecc; - u8 r2w_factor; - u8 write_bl_len; - u8 write_bl_partial; - u8 file_format_grp; - u8 copy; - u8 perm_write_protect; - u8 tmp_write_protect; - u8 file_format; - u8 ecc; -}mmc_csd_t;; - -struct mmc_response_r3 { - u32 ocr; -}; - -#define MMC_VDD_145_150 0x00000001 /* VDD voltage 1.45 - 1.50 */ -#define MMC_VDD_150_155 0x00000002 /* VDD voltage 1.50 - 1.55 */ -#define MMC_VDD_155_160 0x00000004 /* VDD voltage 1.55 - 1.60 */ -#define MMC_VDD_160_165 0x00000008 /* VDD voltage 1.60 - 1.65 */ -#define MMC_VDD_165_170 0x00000010 /* VDD voltage 1.65 - 1.70 */ -#define MMC_VDD_17_18 0x00000020 /* VDD voltage 1.7 - 1.8 */ -#define MMC_VDD_18_19 0x00000040 /* VDD voltage 1.8 - 1.9 */ -#define MMC_VDD_19_20 0x00000080 /* VDD voltage 1.9 - 2.0 */ -#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ -#define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */ -#define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */ -#define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */ -#define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */ -#define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */ -#define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */ -#define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */ -#define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */ -#define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */ -#define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */ -#define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */ -#define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */ -#define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */ -#define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */ -#define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */ -#define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */ - - -/* CSD field definitions */ - -#define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */ -#define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */ -#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 */ - -#define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */ -#define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */ -#define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */ -#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 */ - -#if MMC_DEBUG_LEVEL - -#define DEBUG(n, args...) \ - do { \ - if (n <= MMC_DEBUG_LEVEL) { \ - printf(args); \ - } \ - } while(0) -#else -#define DEBUG(n, args...) -#endif /* MMC_DEBUG_EN */ - -#endif /* __MMC_PROTOCOL__ */