[ramips] move files to files-3.7

[15.05/openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt288x / rt288x.c

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/rt288x.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/rt288x.c
deleted file mode 100644 (file)
index c51ad98..0000000
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/rt288x.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Ralink RT288x SoC specific setup
- *
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/ramips_gpio.h>
-#include <asm/mach-ralink/rt288x.h>
-#include <asm/mach-ralink/rt288x_regs.h>
-
-void __iomem * rt288x_sysc_base;
-void __iomem * rt288x_memc_base;
-
-void __init ramips_soc_prom_init(void)
-{
-       void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
-       u32 n0;
-       u32 n1;
-       u32 id;
-
-       n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
-       n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-       id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
-
-       snprintf(ramips_sys_type, RAMIPS_SYS_TYPE_LEN,
-               "Ralink %c%c%c%c%c%c%c%c id:%u rev:%u",
-               (char) (n0 & 0xff), (char) ((n0 >> 8) & 0xff),
-               (char) ((n0 >> 16) & 0xff), (char) ((n0 >> 24) & 0xff),
-               (char) (n1 & 0xff), (char) ((n1 >> 8) & 0xff),
-               (char) ((n1 >> 16) & 0xff), (char) ((n1 >> 24) & 0xff),
-               (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
-               (id & CHIP_ID_REV_MASK));
-
-       ramips_mem_base = RT2880_SDRAM_BASE;
-       ramips_mem_size_min = RT288X_MEM_SIZE_MIN;
-       ramips_mem_size_max = RT288X_MEM_SIZE_MAX;
-}
-
-static struct ramips_gpio_chip rt288x_gpio_chips[] = {
-       {
-               .chip = {
-                       .label  = "RT288X-GPIO0",
-                       .base   = 0,
-                       .ngpio  = 24,
-               },
-               .regs = {
-                       [RAMIPS_GPIO_REG_INT]   = 0x00,
-                       [RAMIPS_GPIO_REG_EDGE]  = 0x04,
-                       [RAMIPS_GPIO_REG_RENA]  = 0x08,
-                       [RAMIPS_GPIO_REG_FENA]  = 0x0c,
-                       [RAMIPS_GPIO_REG_DATA]  = 0x20,
-                       [RAMIPS_GPIO_REG_DIR]   = 0x24,
-                       [RAMIPS_GPIO_REG_POL]   = 0x28,
-                       [RAMIPS_GPIO_REG_SET]   = 0x2c,
-                       [RAMIPS_GPIO_REG_RESET] = 0x30,
-                       [RAMIPS_GPIO_REG_TOGGLE] = 0x34,
-               },
-               .map_base = RT2880_PIO_BASE,
-               .map_size = RT2880_PIO_SIZE,
-       },
-       {
-               .chip = {
-                       .label  = "RT288X-GPIO1",
-                       .base   = 24,
-                       .ngpio  = 16,
-               },
-               .regs = {
-                       [RAMIPS_GPIO_REG_INT]   = 0x38,
-                       [RAMIPS_GPIO_REG_EDGE]  = 0x3c,
-                       [RAMIPS_GPIO_REG_RENA]  = 0x40,
-                       [RAMIPS_GPIO_REG_FENA]  = 0x44,
-                       [RAMIPS_GPIO_REG_DATA]  = 0x48,
-                       [RAMIPS_GPIO_REG_DIR]   = 0x4c,
-                       [RAMIPS_GPIO_REG_POL]   = 0x50,
-                       [RAMIPS_GPIO_REG_SET]   = 0x54,
-                       [RAMIPS_GPIO_REG_RESET] = 0x58,
-                       [RAMIPS_GPIO_REG_TOGGLE] = 0x5c,
-               },
-               .map_base = RT2880_PIO_BASE,
-               .map_size = RT2880_PIO_SIZE,
-       },
-       {
-               .chip = {
-                       .label  = "RT288X-GPIO2",
-                       .base   = 40,
-                       .ngpio  = 32,
-               },
-               .regs = {
-                       [RAMIPS_GPIO_REG_INT]   = 0x60,
-                       [RAMIPS_GPIO_REG_EDGE]  = 0x64,
-                       [RAMIPS_GPIO_REG_RENA]  = 0x68,
-                       [RAMIPS_GPIO_REG_FENA]  = 0x6c,
-                       [RAMIPS_GPIO_REG_DATA]  = 0x70,
-                       [RAMIPS_GPIO_REG_DIR]   = 0x74,
-                       [RAMIPS_GPIO_REG_POL]   = 0x78,
-                       [RAMIPS_GPIO_REG_SET]   = 0x7c,
-                       [RAMIPS_GPIO_REG_RESET] = 0x80,
-                       [RAMIPS_GPIO_REG_TOGGLE] = 0x84,
-               },
-               .map_base = RT2880_PIO_BASE,
-               .map_size = RT2880_PIO_SIZE,
-       },
-};
-
-static struct ramips_gpio_data rt288x_gpio_data = {
-       .chips = rt288x_gpio_chips,
-       .num_chips = ARRAY_SIZE(rt288x_gpio_chips),
-};
-
-static void rt288x_gpio_reserve(int first, int last)
-{
-       for (; first <= last; first++)
-               gpio_request(first, "reserved");
-}
-
-void __init rt288x_gpio_init(u32 mode)
-{
-       rt288x_sysc_wr(mode, SYSC_REG_GPIO_MODE);
-
-       ramips_gpio_init(&rt288x_gpio_data);
-       if ((mode & RT2880_GPIO_MODE_I2C) == 0)
-               rt288x_gpio_reserve(1, 2);
-
-       if ((mode & RT2880_GPIO_MODE_SPI) == 0)
-               rt288x_gpio_reserve(3, 6);
-
-       if ((mode & RT2880_GPIO_MODE_UART0) == 0)
-               rt288x_gpio_reserve(7, 14);
-
-       if ((mode & RT2880_GPIO_MODE_JTAG) == 0)
-               rt288x_gpio_reserve(17, 21);
-
-       if ((mode & RT2880_GPIO_MODE_MDIO) == 0)
-               rt288x_gpio_reserve(22, 23);
-
-       if ((mode & RT2880_GPIO_MODE_SDRAM) == 0)
-               rt288x_gpio_reserve(24, 39);
-
-       if ((mode & RT2880_GPIO_MODE_PCI) == 0)
-               rt288x_gpio_reserve(40, 71);
-}