model = "Allnet ALL5002";
palmbus@10000000 {
- sysc@0 {
- ralink,pinmux = "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
- ralink,gpiomux = "i2c";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <1>;
- };
-
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
+
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
linux,modalias = "m25p80", "mx25l25635e";
spi-max-frequency = <10000000>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
};
+ };
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x1fb0000>;
- };
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+ ralink,function = "gpio";
};
};
};
ethernet@10100000 {
- status = "okay";
+ mtd-mac-address = <&factory 0x28>;
};
esw@10110000 {
- status = "okay";
ralink,portmap = <0x3f>;
};
wmac@10180000 {
- status = "okay";
+ ralink,mtd-eeprom = <&factory 0>;
};
ehci@101c0000 {
i2c-gpio {
compatible = "i2c-gpio";
-
gpios = <&gpio0 1 0 &gpio0 2 0>;
i2c-gpio,delay-us = <10>;
gpio-leds {
compatible = "gpio-leds";
+
ld1 {
- label = "allnet:green:ld1";
+ label = "all5002:green:ld1";
gpios = <&pcf0 0 1>;
};
+
ld2 {
- label = "allnet:green:ld2";
+ label = "all5002:green:ld2";
gpios = <&pcf0 1 1>;
};
};