#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/input.h>
#include <asm/mips_machine.h>
-
#include <asm/mach-ar71xx/ar71xx.h>
#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-ar913x-wmac.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
#define WNR2000_GPIO_LED_PWR_GREEN 14
#define WNR2000_GPIO_LED_PWR_AMBER 7
#endif
};
-static struct spi_board_info wnr2000_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = &wnr2000_flash_data,
- }
-};
-
static struct gpio_led wnr2000_leds_gpio[] __initdata = {
{
.name = "wnr2000:green:power",
static void __init wnr2000_setup(void)
{
- ar71xx_add_device_spi(NULL, wnr2000_spi_info,
- ARRAY_SIZE(wnr2000_spi_info));
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ar71xx_set_mac_base(mac);
+ ar71xx_add_device_mdio(0x0);
+
+ ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth0_data.phy_mask = 0xf;
+ ar71xx_eth0_data.speed = SPEED_100;
+ ar71xx_eth0_data.duplex = DUPLEX_FULL;
+ ar71xx_eth0_data.has_ar8216 = 1;
+
+ ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ar71xx_eth1_data.phy_mask = 0x10;
+
+ ar71xx_add_device_eth(0);
+ ar71xx_add_device_eth(1);
+
+ ar71xx_add_device_m25p80(&wnr2000_flash_data);
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio),
wnr2000_leds_gpio);
wnr2000_gpio_buttons);
- ar91xx_add_device_wmac();
+ ar913x_add_device_wmac();
}
MIPS_MACHINE(AR71XX_MACH_WNR2000, "NETGEAR WNR2000", wnr2000_setup);