luci-app-advanced-reboot: 2 new routers + error reporting

Added support for: Linksys EA3500 and ZyXEL NBG6817
Added error reporting to both system log and WebUI on errors

Signed-off-by: Stan Grishin <stangri@melmac.net>

diff --git a/applications/luci-app-advanced-reboot/Makefile b/applications/luci-app-advanced-reboot/Makefile
index 3a886eb..5722b42 100644 (file)
--- a/applications/luci-app-advanced-reboot/Makefile
+++ b/applications/luci-app-advanced-reboot/Makefile
@@ -7,13 +7,13 @@ PKG_LICENSE:=GPL-3.0+
 PKG_MAINTAINER:=Stan Grishin <stangri@melmac.net>
 
 LUCI_TITLE:=Advanced Linksys Reboot Web UI
-LUCI_DESCRIPTION:=Provides Web UI (found under System/Advanced Reboot) to reboot supported Linksys routers to\
+LUCI_DESCRIPTION:=Provides Web UI (found under System/Advanced Reboot) to reboot supported Linksys and ZyXEL routers to\
        an altnerative partition. Also provides Web UI to shut down (power off) your device.    Supported dual-partition\
        routers are listed at https://github.com/stangri/openwrt-luci/blob/luci-app-advanced-reboot/applications/luci-app-advanced-reboot/README.md
 
 LUCI_DEPENDS:=+luci
 LUCI_PKGARCH:=all
-PKG_RELEASE:=23
+PKG_RELEASE:=25
 
 include ../../luci.mk
 

diff --git a/applications/luci-app-advanced-reboot/README.md b/applications/luci-app-advanced-reboot/README.md
index ee87a00..cfee188 100644 (file)
--- a/applications/luci-app-advanced-reboot/README.md
+++ b/applications/luci-app-advanced-reboot/README.md
@@ -5,15 +5,16 @@ This package allows you to reboot to an alternative partition on supported (dual
 
 ## Supported Devices
 Currently supported dual-partition devices include:
+- Linksys EA3500
+- Linksys E4200v2
+- Linksys EA4500
+- Linksys EA8500
 - Linksys WRT1200AC
 - Linksys WRT1900AC
 - Linksys WRT1900ACv2
 - Linksys WRT1900ACS
 - Linksys WRT3200ACM
-- Linksys E4200v2
-- Linksys EA4500
-- Linksys EA8500
-
+- ZyXEL NBG6817
 If you're interested in having your device supported, please post in [LEDE Project Forum Support Thread](https://forum.lede-project.org/t/web-ui-to-reboot-to-another-partition-dual-partition-routers/3423).
 
 ## Screenshot (luci-app-advanced-reboot)
@@ -28,8 +29,8 @@ opkg install luci-app-advanced-reboot
 
 ## Notes/Known Issues
 - When you reboot to a different partition, your current settings (WiFi SSID/password, etc.) will not apply to a different partition. Different partitions might have completely different settings and even firmware.
-- If you reboot to a partition which doesn't allow you to switch boot partitions (like stock Linksys firmware), you might not be able to boot back to OpenWrt/LEDE Project unless you reflash it, loosing all the settings.
+- If you reboot to a partition which doesn't allow you to switch boot partitions (like stock vendor firmware), you might not be able to boot back to OpenWrt/LEDE Project unless you reflash it, loosing all the settings.
 - Some devices allow you to trigger reboot to alternative partition by interrupting boot 3 times in a row (by resetting/switching off the device or pulling power). As these methods might be different for different devices, do your own homework.
 
 ## Thanks
-I'd like to thank everyone who helped create, test and troubleshoot this package. Without contributions from [@hnyman](https://github.com/hnyman) and [@jpstyves](https://github.com/jpstyves) it wouldn't have been possible.
+I'd like to thank everyone who helped create, test and troubleshoot this package. Without contributions from [@hnyman](https://github.com/hnyman), [@jpstyves](https://github.com/jpstyves) and [@slh](https://github.com/pkgadd) it wouldn't have been possible.

diff --git a/applications/luci-app-advanced-reboot/luasrc/controller/advanced_reboot.lua b/applications/luci-app-advanced-reboot/luasrc/controller/advanced_reboot.lua
index 2b55217..13d1c73 100644 (file)
--- a/applications/luci-app-advanced-reboot/luasrc/controller/advanced_reboot.lua
+++ b/applications/luci-app-advanced-reboot/luasrc/controller/advanced_reboot.lua
@@ -5,15 +5,18 @@ module("luci.controller.advanced_reboot", package.seeall)
 
 -- device, board_name, part1, part2, offset, env_var_1, value_1_1, value_1_2, env_var_2, value_2_1, value_2_2
 devices = {
+  {"Linksys EA3500", "linksys-audi", "mtd3", "mtd5", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
+  {"Linksys E4200v2/EA4500", "linksys-viper", "mtd3", "mtd5", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
+  {"Linksys EA8500", "ea8500", "mtd13", "mtd15", 32, "boot_part", 1, 2},
   {"Linksys WRT1200AC", "armada-385-linksys-caiman", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
   {"Linksys WRT1900AC", "armada-xp-linksys-mamba", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
   {"Linksys WRT1900ACv2", "armada-385-linksys-cobra", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
   {"Linksys WRT1900ACS", "armada-385-linksys-shelby", "mtd4", "mtd6", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
   {"Linksys WRT3200ACM", "armada-385-linksys-rango", "mtd5", "mtd7", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
-  {"Linksys E4200v2/EA4500", "linksys-viper", "mtd3", "mtd5", 32, "boot_part", 1, 2, "bootcmd", "run nandboot", "run altnandboot"},
-  {"Linksys EA8500", "ea8500", "mtd13", "mtd15", 32, "boot_part", 1, 2}
+  {"ZyXEL NBG6817","nbg6817","mmcblk0p4","mmcblk0p7",32,nil,255,1}
 }
 
+errorMessage = ""
 board_name = luci.util.trim(luci.sys.exec("cat /tmp/sysinfo/board_name"))
 for i=1, #devices do
   if board_name and devices[i][2] == board_name then
@@ -41,14 +44,29 @@ for i=1, #devices do
     if string.find(partition_two_label, "LEDE") then partition_two_os = "LEDE" end
     if string.find(partition_two_label, "OpenWrt") then partition_two_os = "OpenWrt" end
     if string.find(partition_two_label, "Linksys") then partition_two_os = "Linksys" end
+    if device_name and device_name == "ZyXEL NBG6817" then
+      if not partition_one_os then partition_one_os = "ZyXEL" end
+      if not partition_two_os then partition_two_os = "ZyXEL" end
+    end
     if not partition_one_os then partition_one_os = "Unknown" end
     if not partition_two_os then partition_two_os = "Unknown" end
     if partition_one_os and partition_one_version then partition_one_os = partition_one_os .. " (Linux " .. partition_one_version .. ")" end
     if partition_two_os and partition_two_version then partition_two_os = partition_two_os .. " (Linux " .. partition_two_version .. ")" end
-    if nixio.fs.access("/usr/sbin/fw_printenv") and nixio.fs.access("/usr/sbin/fw_setenv") then
-      current_partition = tonumber(luci.util.trim(luci.sys.exec("/usr/sbin/fw_printenv -n " .. boot_envvar1)))
-      other_partition = current_partition == boot_envvar1_partition_one and boot_envvar1_partition_two or boot_envvar1_partition_one
+
+    if device_name and device_name == "ZyXEL NBG6817" then
+      if not zyxelFlagPartition then zyxelFlagPartition = luci.util.trim(luci.sys.exec("source /lib/functions.sh; find_mtd_part 0:DUAL_FLAG")) end
+      if not zyxelFlagPartition then
+        errorMessage = errorMessage .. luci.i18n.translate("Unable to find Dual Boot Flag Partition." .. " ")
+        luci.util.perror(luci.i18n.translate("Unable to find Dual Boot Flag Partition."))
+      else
+        current_partition = tonumber(luci.sys.exec("dd if=" .. zyxelFlagPartition .. " bs=1 count=1 2>/dev/null | hexdump -n 1 -e '1/1 \"%d\"'"))
+      end
+    else
+      if nixio.fs.access("/usr/sbin/fw_printenv") and nixio.fs.access("/usr/sbin/fw_setenv") then
+        current_partition = tonumber(luci.util.trim(luci.sys.exec("/usr/sbin/fw_printenv -n " .. boot_envvar1)))
+      end
     end
+    other_partition = current_partition == boot_envvar1_partition_two and boot_envvar1_partition_one or boot_envvar1_partition_two
   end
 end
 
@@ -70,8 +88,19 @@ function action_reboot()
 end
 
 function action_altreboot()
+  local zyxelFlagPartition, zyxelBootFlag, zyxelNewBootFlag, errorCode, curEnvSetting, newEnvSetting
+  errorMessage = ""
+  errorCode = 0
   if luci.http.formvalue("cancel") then
     luci.http.redirect(luci.dispatcher.build_url('admin/system/advanced_reboot'))
+--    luci.template.render("advanced_reboot/advanced_reboot",{
+--      device_name=device_name,
+--      boot_envvar1_partition_one=boot_envvar1_partition_one,
+--      partition_one_os=partition_one_os,
+--      boot_envvar1_partition_two=boot_envvar1_partition_two,
+--      partition_two_os=partition_two_os,
+--      current_partition=current_partition,
+--      errorMessage = luci.i18n.translate("Alternative reboot cancelled.")})
     return
   end
   local step = tonumber(luci.http.formvalue("step") or 1)
@@ -79,21 +108,72 @@ function action_altreboot()
     if device_name and nixio.fs.access("/usr/sbin/fw_printenv") and nixio.fs.access("/usr/sbin/fw_setenv") then
       luci.template.render("advanced_reboot/alternative_reboot",{})
     else
-      luci.template.render("advanced_reboot/advanced_reboot",{})
+      luci.template.render("advanced_reboot/advanced_reboot",{errorMessage = luci.i18n.translate("No access to fw_printenv or fw_printenv!")})
     end
   elseif step == 2 then
-    luci.template.render("admin_system/applyreboot", {
-          title = luci.i18n.translate("Rebooting..."),
-          msg   = luci.i18n.translate("The system is rebooting to an alternative partition now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes before you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
-          addr  = luci.ip.new(uci.cursor():get("network", "lan", "ipaddr")) or "192.168.1.1"
-        })
-    if boot_envvar1 then env1 = tonumber(luci.util.trim(luci.sys.exec("/usr/sbin/fw_printenv -n " .. boot_envvar1))) end
-    if boot_envvar2 then env2 = luci.util.trim(luci.sys.exec("/usr/sbin/fw_printenv -n " .. boot_envvar2)) end
-    if env1 and env1 == boot_envvar1_partition_one then luci.sys.call("/usr/sbin/fw_setenv " .. boot_envvar1 .. " " .. boot_envvar1_partition_two) end
-    if env1 and env1 == boot_envvar1_partition_two then luci.sys.call("/usr/sbin/fw_setenv " .. boot_envvar1 .. " " .. boot_envvar1_partition_one) end
-    if env2 and env2 == boot_envvar2_partition_one then luci.sys.call("/usr/sbin/fw_setenv " .. boot_envvar2 .. " '" .. boot_envvar2_partition_two .. "'") end
-    if env2 and env2 == boot_envvar2_partition_two then luci.sys.call("/usr/sbin/fw_setenv " .. boot_envvar2 .. " '" .. boot_envvar2_partition_one .. "'") end
-    luci.sys.reboot()
+    if boot_envvar1 or boot_envvar2 then -- Linksys devices
+      if boot_envvar1 then
+        curEnvSetting = tonumber(luci.util.trim(luci.sys.exec("/usr/sbin/fw_printenv -n " .. boot_envvar1)))
+        if not curEnvSetting then
+          errorMessage = errorMessage .. luci.i18n.translate("Unable to obtain firmware environment variable") .. ": " .. boot_envvar1 .. ". "
+          luci.util.perror(luci.i18n.translate("Unable to obtain firmware environment variable") .. ": " .. boot_envvar1 .. ".")
+        else
+          newEnvSetting = curEnvSetting == boot_envvar1_partition_one and boot_envvar1_partition_two or boot_envvar1_partition_one
+          errorCode = luci.sys.call("/usr/sbin/fw_setenv " .. boot_envvar1 .. " " .. newEnvSetting)
+            if errorCode ~= 0 then
+              errorMessage = errorMessage .. luci.i18n.translate("Unable to set firmware environment variable") .. ": " .. boot_envvar1 .. " " .. luci.i18n.translate("to") .. " " .. newEnvSetting .. ". "
+              luci.util.perror(luci.i18n.translate("Unable to set firmware environment variable") .. ": " .. boot_envvar1 .. " " .. luci.i18n.translate("to") .. " " .. newEnvSetting .. ".")
+            end
+        end
+      end
+      if boot_envvar2 then
+        curEnvSetting = luci.util.trim(luci.sys.exec("/usr/sbin/fw_printenv -n " .. boot_envvar2))
+        if not curEnvSetting then
+          errorMessage = errorMessage .. luci.i18n.translate("Unable to obtain firmware environment variable") .. ": " .. boot_envvar2 .. ". "
+          luci.util.perror(luci.i18n.translate("Unable to obtain firmware environment variable") .. ": " .. boot_envvar2 .. ".")
+        else
+          newEnvSetting = curEnvSetting == boot_envvar2_partition_one and boot_envvar2_partition_two or boot_envvar2_partition_one
+          errorCode = luci.sys.call("/usr/sbin/fw_setenv " .. boot_envvar2 .. " '" .. newEnvSetting .. "'")
+          if errorCode ~= 0 then
+            errorMessage = errorMessage .. luci.i18n.translate("Unable to set firmware environment variable") .. ": " .. boot_envvar2 .. " " .. luci.i18n.translate("to") .. " " .. newEnvSetting .. ". "
+            luci.util.perror(luci.i18n.translate("Unable to set firmware environment variable") .. ": " .. boot_envvar2 .. " " .. luci.i18n.translate("to") .. " " .. newEnvSetting .. ".")
+          end
+        end
+      end
+    else -- NetGear device
+      if not zyxelFlagPartition then zyxelFlagPartition = luci.util.trim(luci.sys.exec("source /lib/functions.sh; find_mtd_part 0:DUAL_FLAG")) end
+      if not zyxelFlagPartition then
+        errorMessage = errorMessage .. luci.i18n.translate("Unable to find Dual Boot Flag Partition." .. " ")
+        luci.util.perror(luci.i18n.translate("Unable to find Dual Boot Flag Partition."))
+      else
+        zyxelBootFlag = tonumber(luci.sys.exec("dd if=" .. zyxelFlagPartition .. " bs=1 count=1 2>/dev/null | hexdump -n 1 -e '1/1 \"%d\"'"))
+        zyxelNewBootFlag = zyxelBootFlag and zyxelBootFlag == 1 and "\\xff" or "\\x01"
+        if zyxelNewBootFlag then
+          errorCode = luci.sys.call("printf \"" .. zyxelNewBootFlag .. "\" >" .. zyxelFlagPartition )
+          if errorCode ~= 0 then
+            errorMessage = errorMessage .. luci.i18n.translate("Unable to set Dual Boot Flag Partition entry for partition") .. ": " .. zyxelFlagPartition .. ". "
+            luci.util.perror(luci.i18n.translate("Unable to set Dual Boot Flag Partition entry for partition") .. ": " .. zyxelFlagPartition .. ".")
+          end
+        end
+      end
+    end
+    if errorMessage == "" then
+      luci.template.render("admin_system/applyreboot", {
+            title = luci.i18n.translate("Rebooting..."),
+            msg   = luci.i18n.translate("The system is rebooting to an alternative partition now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a few minutes before you try to reconnect. It might be necessary to renew the address of your computer to reach the device again, depending on your settings."),
+            addr  = luci.ip.new(uci.cursor():get("network", "lan", "ipaddr")) or "192.168.1.1"
+          })
+      luci.sys.reboot()
+    else
+      luci.template.render("advanced_reboot/advanced_reboot",{
+        device_name=device_name,
+        boot_envvar1_partition_one=boot_envvar1_partition_one,
+        partition_one_os=partition_one_os,
+        boot_envvar1_partition_two=boot_envvar1_partition_two,
+        partition_two_os=partition_two_os,
+        current_partition=current_partition,
+        errorMessage = errorMessage})
+    end
   end
 end
 

diff --git a/applications/luci-app-advanced-reboot/luasrc/view/advanced_reboot/advanced_reboot.htm b/applications/luci-app-advanced-reboot/luasrc/view/advanced_reboot/advanced_reboot.htm
index 206d250..0629c84 100644 (file)
--- a/applications/luci-app-advanced-reboot/luasrc/view/advanced_reboot/advanced_reboot.htm
+++ b/applications/luci-app-advanced-reboot/luasrc/view/advanced_reboot/advanced_reboot.htm
@@ -14,6 +14,10 @@
        <p class="alert-message warning"><%:Warning: There are unsaved changes that will get lost on reboot!%></p>
 <%- end -%>
 
+<%- if errorMessage and errorMessage ~= "" then -%>
+       <p class="alert-message warning"><%:ERROR: %><%=errorMessage%></p>
+<%- end -%>
+
 <%- if device_name then -%>
 <fieldset class="cbi-section">
   <legend><%=device_name%><%: Partitions%></legend>
@@ -26,7 +30,7 @@
     </tr>
     <tr class="cbi-section-table-row">
       <td>
-        <%=boot_envvar1_partition_one%>
+        <%=string.format("%X", boot_envvar1_partition_one)%>
       </td>
       <td>
         <%- if boot_envvar1_partition_one == current_partition then -%><%:Current%><%- else -%><%:Alternative%><%- end -%>
@@ -50,7 +54,7 @@
     </tr>
     <tr class="cbi-section-table-row">
       <td>
-        <%=boot_envvar1_partition_two%>
+        <%=string.format("%X", boot_envvar1_partition_two)%>
       </td>
       <td>
         <%- if boot_envvar1_partition_two == current_partition then -%><%:Current%><%- else -%><%:Alternative%><%- end -%>