+++ /dev/null
-uci-*
-uci.git
-*.tar.gz
-patches/series
+++ /dev/null
-include ../../build/config.mk
-include ../../build/gccconfig.mk
-
-UCI_VERSION = 0.8.0
-#UCI_SITE = http://mirror2.openwrt.org/sources
-#UCI_DIR = uci-$(UCI_VERSION)
-#UCI_FILE = $(UCI_DIR).tar.gz
-#UCI_URL = $(UCI_SITE)/$(UCI_FILE)
-UCI_GITREV = aa3ab8012bfbf793d2884c08ea924545a04e9544
-UCI_SITE = http://nbd.name
-UCI_DIR = uci.git
-UCI_FILE = uci-$(UCI_VERSION)$(UCI_APPEND).tar.gz
-UCI_URL = $(UCI_SITE)/gitweb.cgi?p=uci.git;a=snapshot;h=$(UCI_GITREV)
-UCI_PATCHDIR = patches
-
-all: compile
-
-include ../../build/module.mk
-
-$(UCI_FILE):
- wget -O $@ "$(UCI_URL)" || rm -f $@
-
-$(UCI_DIR)/.prepared: $(UCI_FILE)
- rm -rf $(UCI_DIR)
- tar xvfz $(UCI_FILE)
- (cd $(UCI_PATCHDIR); ls *.patch | sort > series) || true
- [ -f "$(UCI_PATCHDIR)/series" ] && while read patch; do \
- patch -d $(UCI_DIR) -p1 < $(UCI_PATCHDIR)/$$patch; \
- done < $(UCI_PATCHDIR)/series || true
- touch $@
-
-compile: $(UCI_DIR)/.prepared
- $(MAKE) -C $(UCI_DIR) CC=$(CC) CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)" OS="$(OS)"
- mkdir -p dist/usr/lib dist/usr/bin
- $(MAKE) -C $(UCI_DIR) install DESTDIR=../dist prefix=/usr
- $(MAKE) -C $(UCI_DIR)/lua CC=$(CC) CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)" OS="$(OS)"
- $(MAKE) -C $(UCI_DIR)/lua install DESTDIR=../../dist luadir=$(LUA_LIBRARYDIR)
-
-compile-all: compile
-
-clean:
- rm -rf $(UCI_PATCHDIR)/series
- rm -rf $(UCI_DIR) $(UCI_FILE)
+++ /dev/null
-#!/bin/sh
-$(dirname $0)/../usr/bin/uci -c $(dirname $0)/../etc/config "$@"
+++ /dev/null
-#!/bin/sh
-for i in $(find $(dirname $0)/../etc/uci-defaults -type f -not -name "$2")
-do
- [ -f $i ] && {
- bash $i; rm $i
- }
-done
+++ /dev/null
-config batmand general
- option interface ath0
- option announce
- option gateway_class
- option originator_interval
- option preferred_gateway
- option routing_class
- option visualisation_srv
- option policy_routing_script
-
+++ /dev/null
-#################################################################
-# In order to enable dynamic dns you need at least one section,
-# and in that seciton the "enabled" option must be set to one
-#
-# Each section represents an update to a different service
-#
-# You specify your domain name, your username and your password
-# with the optins "domain", "username" and "password" respectively
-#
-# Next you need to specify the name of the service you are
-# connecting to "eg. dyndns.org". The format of the update
-# urls for several different dynamic dns services is specified
-# in the /usr/lib/ddns/services file. This list is hardly complete
-# as there are many, many different dynamic dns services. If your
-# service is on the list you can merely specify it with the
-# "service_name" option. Otherwise you will need to determine
-# the format of the url to update with. You can either add an
-# entry to the /usr/lib/ddns/services file or specify this with
-# the "update_url" option.
-#
-# We also need to specify the source of the ip address to associate with
-# your domain. The "ip_source" option can be "network", "interface"
-# or "web", with "network" as the default.
-#
-# If "ip_source" is "network" you specify a network section in your
-# /etc/network config file (e.g. "wan", which is the default) with
-# the "ip_network" option. If you specify "wan", you will update
-# with whatever the ip for your wan is.
-#
-# If "ip_source" is "interface" you specify a hardware interface
-# (e.g. "eth1") and whatever the current ip of this interface is
-# will be associated with the domain when an update is performed.
-#
-# The last possibility is that "ip_source" is "web", which means
-# that in order to obtain our ip address we will connect to a
-# website, and the first valid ip address listed on that page
-# will be assumed to be ours. If you are behind another firewall
-# this is the best option since none of the local networks or
-# interfaces will have the external ip. The website to connect
-# to is specified by the "ip_url" option. You may specify multiple
-# urls in the option, separated by whitespace.
-#
-# Finally we need to specify how often to check whether we need
-# to check whether the ip address has changed (and if so update
-# it) and how often we need to force an update ( many services
-# will expire your domain if you don't connect and do an update
-# every so often). Use the "check_interval" to specify how
-# often to check whether an update is necessary, and the
-# "force_interval" option to specify how often to force an
-# update. Specify the units for these values with the "check_unit"
-# and the "force_unit" options. Units can be "days", "hours",
-# "minutes" or "seconds". The default force_unit is hours and the
-# default check_unit is seconds. The default check_interval is
-# 600 seconds, or ten minutes. The default force_interval is
-# 72 hours or 3 days.
-#
-#
-#########################################################
-
-config service "myddns"
- option enabled "0"
-
- option service_name "dyndns.org"
- option domain "mypersonaldomain.dyndns.org"
- option username "myusername"
- option password "mypassword"
-
- option ip_source "network"
- option ip_network "wan"
-
-
- option force_interval "72"
- option force_unit "hours"
- option check_interval "10"
- option check_unit "minutes"
-
- #option ip_source "interface"
- #option ip_interface "eth0.1"
-
- #option ip_source "web"
- #option ip_url "http://www.whatismyip.com/automation/n09230945.asp"
-
- #option update_url "http://[USERNAME]:[PASSWORD]@members.dyndns.org/nic/update?hostname=[DOMAIN]&myip=[IP]"
-
-
+++ /dev/null
-config dnsmasq
- option domainneeded 1
- option boguspriv 1
- option filterwin2k '0' #enable for dial on demand
- option localise_queries 1
- option local '/lan/'
- option domain 'lan'
- option expandhosts 1
- option nonegcache 0
- option authoritative 1
- option readethers 1
- option leasefile '/tmp/dhcp.leases'
- option resolvfile '/tmp/resolv.conf.auto'
-
-config dhcp
- option interface lan
- option start 100
- option limit 150
- option leasetime 12h
-
-config dhcp
- option interface wan
- option ignore 1
+++ /dev/null
-config dropbear
- option PasswordAuth 'on'
- option Port '22'
+++ /dev/null
-config defaults
- option syn_flood 1
- option input DROP
- option output ACCEPT
- option forward DROP
-
-config zone
- option name lan
- option input ACCEPT
- option output ACCEPT
- option forward DROP
-
-config zone
- option name wan
- option input DROP
- option output ACCEPT
- option forward DROP
- option masq 1
-
-config forwarding
- option src lan
- option dest wan
-
-
-### EXAMPLE CONFIG SECTIONS
-# do not allow a specific ip to access wan
-#config rule
-# option src lan
-# option src_ip 192.168.45.2
-# option dest wan
-# option proto tcp
-# option target REJECT
-
-# block a specific mac on wan
-#config rule
-# option dest wan
-# option src_mac 00:11:22:33:44:66
-# option target REJECT
-
-# block incoming ICMP traffic on a zone
-#config rule
-# option src lan
-# option proto ICMP
-# option target DROP
-
-# port redirect port coming in on wan to lan
-#config redirect
-# option src wan
-# option src_dport 80
-# option dest lan
-# option dest_ip 192.168.16.235
-# option dest_port 80
-# option protocol tcp
-
-# include a file with users custom iptables rules
-#config include
-# option path /etc/firewall.user
-
-
-### FULL CONFIG SECTIONS
-#config rule
-# option src lan
-# option src_ip 192.168.45.2
-# option src_mac 00:11:22:33:44:55
-# option src_port 80
-# option dest wan
-# option dest_ip 194.25.2.129
-# option dest_port 120
-# option proto tcp
-# option target REJECT
-
-#config redirect
-# option src lan
-# option src_ip 192.168.45.2
-# option src_mac 00:11:22:33:44:55
-# option src_port 1024
-# option src_dport 80
-# option dest_ip 194.25.2.129
-# option dest_port 120
-# option proto tcp
+++ /dev/null
-config mount
- option target /home
- option device /dev/sda1
- option fstype ext3
- option options rw,sync
- option enabled 0
-
-config swap
- option device /dev/sda2
- option enabled 0
+++ /dev/null
-
-config 'httpd'
- option 'port' '80'
- option 'home' '/www'
-
+++ /dev/null
-config 'smap_scannet' 'SIP_LAN'
- option 'enable' '0'
- option 'interface' 'lan'
- option 'subnet' '192.168.99.0/24'
- option 'ports' '5060'
- option 'timeout' '10'
- option 'repeat_count' '1'
- option 'sleepreq' '100'
-
-config 'smap_scannet' 'SIP_WAN'
- option 'enable' '0'
- option 'interface' 'wan'
- option 'subnet' '216.218.0.0/16'
-
-config 'netdiscover_scannet' 'SCAN_LAN'
- option 'enable' '0'
- option 'interface' 'lan'
- option 'subnet' '192.168.99.0/24'
-
-config 'netdiscover_scannet' 'SCAN_WAN'
- option 'enable' '0'
- option 'interface' 'wan'
- option 'subnet' '216.218.0.0/16'
- option 'ports' '5060'
- option 'timeout' '10'
- option 'repeat_count' '1'
- option 'sleepreq' '100'
-
-
+++ /dev/null
-
-config 'mactodevinfo'
- option 'maclow' '00:19:15:00:00:00'
- option 'machigh' '00:19:15:ff:ff:ff'
- option 'vendor' 'Vertical Communications'
- option 'devtype' 'SIP devices'
- option 'model' 'varies'
- option 'ouiowneroverride' 'Some company'
- option 'name' 'Vertical XIP and Phones'
-
+++ /dev/null
-#### VLAN configuration
-config switch eth0
- option vlan0 "0 1 2 3 5*"
- option vlan1 "4 5"
-
-
-#### Loopback configuration
-config interface loopback
- option ifname "lo"
- option proto static
- option ipaddr 127.0.0.1
- option netmask 255.0.0.0
-
-
-#### LAN configuration
-config interface lan
- option type bridge
- option ifname "eth0"
- option proto static
- option ipaddr 192.168.1.1
- option netmask 255.255.255.0
-
-
-#### WAN configuration
-config interface wan
- option ifname "wlan0"
- option proto dhcp
+++ /dev/null
-config ntpserver
- option hostname '0.openwrt.pool.ntp.org'
- option port '123'
-
-config ntpserver
- option hostname '1.openwrt.pool.ntp.org'
- option port '123'
-
-config ntpserver
- option hostname '2.openwrt.pool.ntp.org'
- option port '123'
-
-config ntpserver
- option hostname '3.openwrt.pool.ntp.org'
- option port '123'
-
-config ntpdrift
- option freq '0'
-
-config ntpclient
- option interval 60
- #option count 10
+++ /dev/null
-# QoS configuration for OpenWrt
-
-# INTERFACES:
-config interface wan
- option classgroup "Default"
- option enabled 1
- option overhead 1
- option upload 128
- option download 1024
-
-# RULES:
-config classify
- option target "Bulk"
- option ipp2p "all"
-config classify
- option target "Bulk"
- option layer7 "edonkey"
-config classify
- option target "Bulk"
- option layer7 "bittorrent"
-config classify
- option target "Priority"
- option ports "22,53"
-config classify
- option target "Normal"
- option proto "tcp"
- option ports "20,21,25,80,110,443,993,995"
-config classify
- option target "Express"
- option ports "5190"
-config default
- option target "Express"
- option proto "udp"
- option pktsize "-500"
-config reclassify
- option target "Priority"
- option proto "icmp"
-config default
- option target "Bulk"
- option portrange "1024-65535"
-config reclassify
- option target "Priority"
- option proto "tcp"
- option pktsize "-128"
- option mark "!Bulk"
- option tcpflags "SYN"
-config reclassify
- option target "Priority"
- option proto "tcp"
- option pktsize "-128"
- option mark "!Bulk"
- option tcpflags "ACK"
-
-
-# Don't change the stuff below unless you
-# really know what it means :)
-
-config classgroup "Default"
- option classes "Priority Express Normal Bulk"
- option default "Normal"
-
-
-config class "Priority"
- option packetsize 400
- option maxsize 400
- option avgrate 10
- option priority 20
-config class "Priority_down"
- option packetsize 1000
- option avgrate 10
-
-
-config class "Express"
- option packetsize 1000
- option maxsize 800
- option avgrate 50
- option priority 10
-
-config class "Normal"
- option packetsize 1500
- option packetdelay 100
- option avgrate 10
- option priority 5
-config class "Normal_down"
- option avgrate 20
-
-config class "Bulk"
- option avgrate 1
- option packetdelay 200
+++ /dev/null
-config system
- option hostname OpenWrt
- option timezone UTC
+++ /dev/null
-config upnpd config
- option log_output 0
- option download 1024
- option upload 512
+++ /dev/null
-config wifi-device wifi0
- option type atheros
- option channel auto
- option disabled 0
-
-config wifi-iface
- option device wifi0
- option network lan
- option mode ap
- option ssid OpenWrt
- option encryption none
-
- # Fake active wifi
- option ifname ath0
- option up 1
-
projects / project / luci.git / commitdiff