+++ /dev/null
---[[
-
-Luci i18n translation file for the statistics application - german
-(c) 2008 Freifunk Leipzig / Jo-Philipp Wich <xm@leipzig.freifunk.net>
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
-$Id$
-
-]]--
-
-
---
--- general translations
---
-
-stat_statistics = "Statistiken"
-stat_systemplugins = "Systemplugins"
-stat_networkplugins = "Netzwerkplugins"
-stat_outputplugins = "Ausgabeplugins"
-stat_showtimespan = "Zeitspanne zeigen »"
-stat_graphs = "Diagramme"
-
-
---
--- collectd plugin translations
---
-
-stat_collectd = "Collectd"
-stat_cpu = "Prozessor"
-stat_ping = "Ping"
-stat_iptables = "Firewall"
-stat_netlink = "Netlink"
-stat_processes = "Prozesse"
-stat_wireless = "Drahtlos"
-stat_tcpconns = "TCP-Verbindungen"
-stat_interface = "Schnittstellen"
-stat_df = "Plattenspeicher"
-stat_irq = "Interrupts"
-stat_disk = "Plattenauslastung"
-stat_exec = "Exec"
-stat_rrdtool = "RRDTool"
-stat_network = "Netzwerk"
-stat_csv = "CSV Ausgabe"
-
-
---
--- diagram translations
---
-
-stat_dg_title_wireless__signal_noise = "%H: Drahtlos - Signal-Noise-Verhältnis"
-stat_dg_label_wireless__signal_noise = "dBm"
-stat_ds_signal_noise = "Noise-Level"
-stat_ds_signal_power = "Signalstärke"
-
-stat_dg_title_wireless__signal_quality = "%H: Drahtlos - Signalqualität"
-stat_dg_label_wireless__signal_quality = "n"
-stat_ds_signal_quality = "Signalqualität"
-
-stat_dg_title_ping = "%H: ICMP Antwortzeiten"
-stat_dg_label_ping = "ms"
-stat_ds_ping = "%di"
-
-stat_dg_title_iptables__ipt_packets = "%H: Firewall - Verarbeitete Pakete"
-stat_dg_label_iptables__ipt_packets = "Pakete/s"
-stat_ds_ipt_packets = 'Kette "%di"'
-
-stat_dg_title_netlink__if_octets = "%H: Netlink - Transfer auf %pi"
-stat_dg_label_netlink__if_octets = "Bytes/s"
-stat_ds_if_octets = "Bytes (%ds)"
-
-stat_dg_title_netlink__if_packets = "%H: Netlink - Pakete auf %pi"
-stat_dg_label_netlink__if_packets = "Pakete/s"
-stat_ds_if_packets = "Verarbeitet (%ds)"
-stat_ds_if_dropped = "Verworfen (%ds)"
-stat_ds_if_errors = "Fehler (%ds)"
-
-stat_dg_title_netlink__if_multicast = "%H: Netlink - Multicast auf %pi"
-stat_dg_label_netlink__if_multicast = "Pakete/s"
-stat_ds_if_multicast = "Pakete"
-
-stat_dg_title_netlink__if_collisions = "%H: Netlink - Kollisionen auf %pi"
-stat_dg_label_netlink__if_collisions = "Kollisionen/s"
-stat_ds_if_collisions = "Kollisionen"
-
-stat_dg_title_netlink__if_tx_errors = "%H: Netlink - Fehler auf %pi"
-stat_dg_label_netlink__if_tx_errors = "Fehler/s"
-stat_ds_if_tx_errors = "%di"
-stat_ds_if_rx_errors = "%di"
-
-stat_dg_title_processes = "%H: Prozesse"
-stat_dg_label_processes = "Prozesse/s"
-stat_ds_ps_state = "%di"
-
-stat_dg_title_processes__ps_cputime = "%H: Prozess %pi - Verbrauchte CPU Zeit"
-stat_dg_label_processes__ps_cputime = "Jiffies"
-stat_ds_ps_cputime__syst = "System"
-stat_ds_ps_cputime__user = "User"
-
-stat_dg_title_processes__ps_count = "%H: Prozess %pi - Threads und Prozesse"
-stat_dg_label_processes__ps_count = "Anzahl"
-stat_ds_ps_count = "%ds"
-
-stat_dg_title_processes__ps_pagefaults = "%H: Prozess %pi - Speicherzugriffsfehler"
-stat_dg_label_processes__ps_pagefaults = "Zugriffsfehler"
-stat_ds_ps_pagefaults = "Zugriffsfehler"
-
-stat_dg_title_processes__ps_rss = "%H: Process %pi - Virtueller Speicher"
-stat_dg_label_processes__ps_rss = "Bytes"
-stat_ds_ps_rss = "virtueller Speicher"
-
-stat_dg_title_cpu = "%H: Auslastung auf Prozessor #%pi"
-stat_dg_label_cpu = "%"
-stat_ds_cpu = "%di"
-
-stat_dg_title_interface__if_octets = "%H: Transfer auf %di"
-stat_dg_label_interface__if_octets = "Bytes/s"
-
-stat_dg_title_interface__if_packets = "%H: Pakete auf %di"
-stat_dg_label_interface__if_packets = "Pakete/s"
-
-stat_dg_title_tcpconns = "%H: TCP-Verbindungen auf Port %pi"
-stat_dg_label_tcpconns = "Verbindungen/s"
-stat_ds_tcp_connections = "%di"
-
-stat_dg_title_df = "%H: Speicherverbrauch auf %di"
-stat_dg_label_df = "Bytes"
-stat_ds_df__free = "verfügbar"
-stat_ds_df__used = "belegt "
-
-stat_dg_title_irq = "%H: Interrupts"
-stat_dg_label_irq = "Aufrufe/s"
-stat_ds_irq = "IRQ %di"
-
-
---
--- CBI translations
---
-
-lucistatistics = "Statistiken"
-
--- general config
-lucistatistics_collectd = "Collectd Einstellungen"
-lucistatistics_collectd_desc = [[
- Collectd ist ein schlankes Dienstprogramm zum Sammeln von Systemdaten aus verschiedenen Quellen mittels diverser Plugins.
- Auf dieser Seite können generelle Einstellungen für den Collectd-Daemon vorgenommen werden.
-]]
-
-lucistatistics_collectd_hostname = "Hostname"
-lucistatistics_collectd_basedir = "Basisverzeichnis"
-lucistatistics_collectd_include = "Verzeichnis für Unterkonfigurationen"
-lucistatistics_collectd_plugindir = "Verzeichnis für Collectd-Plugins"
-lucistatistics_collectd_pidfile = "Pfad zu PID-Datei"
-lucistatistics_collectd_typesdb = "Dataset-Definitionen"
-lucistatistics_collectd_interval = "Daten-Sammelintervall"
-lucistatistics_collectd_interval_desc = "Sekunden"
-lucistatistics_collectd_readthreads = "Anzahl paralleler Sammelprozesse"
-lucistatistics_collectd_fqdnlookup = "automatisch vollen Hostnamen herausfinden"
-
--- cpu plugin
-lucistatistics_collectdcpu = "CPU Plugin Konfiguration"
-lucistatistics_collectdcpu_desc = "Das CPU-Plugin sammelt grundlegende Statistiken über die Prozessorauslastung."
-lucistatistics_collectdcpu_enable = "Plugin aktivieren"
-
--- csv plugin
-lucistatistics_collectdcsv = "CSV Plugin Konfiguration"
-lucistatistics_collectdcsv_desc = [[
- Das CSV-Plugin speichert die gesammelten Daten im CSV-Format,
- geeignet für die Weiterverarbeitung durch externe Programme.
-]]
-
-lucistatistics_collectdcsv_enable = "Plugin aktivieren"
-lucistatistics_collectdcsv_datadir = "Speicherverzeichnis für die CSV-Dateien"
-lucistatistics_collectdcsv_storerates = "Werte nicht absolut sondern als Raten speichern"
-
--- df plugin
-lucistatistics_collectddf = "DF Plugin Konfiguration"
-lucistatistics_collectddf_desc = "Das DF-Plugin sammelt Statistiken über den Speicherverbrauch auf verschiedenen Geräten, Mount-Punkten oder Dateisystemtypen."
-lucistatistics_collectddf_enable = "Plugin aktivieren"
-lucistatistics_collectddf_devices = "Geräte überwachen"
-lucistatistics_collectddf_devices_desc = "mehrere mit Leerzeichen trennen"
-lucistatistics_collectddf_mountpoints = "Mount-Punkte überwachen"
-lucistatistics_collectddf_mountpoints_desc = "mehrere mit Leerzeichen trennen"
-lucistatistics_collectddf_fstypes = "Datesystemtypen überwachen"
-lucistatistics_collectddf_fstypes_desc = "mehrere mit Leerzeichen trennen"
-lucistatistics_collectddf_ignoreselected = "Alle außer Ausgewählte überwachen"
-
--- disk plugin
-lucistatistics_collectddisk = "Disk Plugin Konfiguration"
-lucistatistics_collectddisk_desc = "Das Disk-Plugin sammelt detaillierte Statistiken über die Auslastung auf ausgewählten Festplatten und Partitionen."
-lucistatistics_collectddisk_enable = "Plugin aktivieren"
-lucistatistics_collectddisk_disks = "Geräte und Partitionen überwachen"
-lucistatistics_collectddisk_disks_desc = "mehrere mit Leerzeichen trennen"
-lucistatistics_collectddisk_ignoreselected = "Alle außer Ausgewählte überwachen"
-
--- dns plugin
-lucistatistics_collectddns = "DNS Plugin Konfiguration"
-lucistatistics_collectddns_desc = "Das DNS-Plugin sammelt detaillierte Statistiken über DNS-bezogenen Verkehr auf ausgewählten Schnittstellen."
-lucistatistics_collectddns_enable = "Plugin aktivieren"
-lucistatistics_collectddns_interfaces = "Schnittstellen überwachen"
-lucistatistics_collectddns_interfaces_desc = "mehrere mit Leerzeichen trennen"
-lucistatistics_collectddns_ignoresources = "Quelladressen ignorieren"
-lucistatistics_collectddns_ignoresources_desc = "mehrere mit Leerzeichen trennen"
-
--- email plugin
-lucistatistics_collectdemail = "E-Mail Plugin Konfiguration"
-lucistatistics_collectdemail_desc = [[
- Das E-Mail Plugin erstellt einen Unix-Socket welcher benutzt werden kann
- um E-Mail-Statistiken an den laufenden Collectd-Daemon zu übermitteln.
- Dieses Plugin ist primär für die Verwendung zusammen mit
- Mail::SpamAssasin::Plugin::Collectd gedacht, kann aber auch anderweitig
- verwendet werden.
-]]
-
-lucistatistics_collectdemail_enable = "Plugin aktivieren"
-lucistatistics_collectdemail_socketfile = "Dateipfad des Unix-Sockets"
-lucistatistics_collectdemail_socketgroup = "Gruppenbesitzer festlegen"
-lucistatistics_collectdemail_socketgroup_desc = "Gruppenname"
-lucistatistics_collectdemail_socketperms = "Dateiberechtigungen des Unix-Sockets"
-lucistatistics_collectdemail_socketperms_desc = "oktal"
-lucistatistics_collectdemail_maxconns = "Maximale Anzahl erlaubter Verbindungen"
-
--- exec plugin
-lucistatistics_collectdexec = "Exec Plugin Konfiguration"
-lucistatistics_collectdexec_desc = [[
- Das Exec-Plugin startet externe Kommandos um Werte einzulesen oder um
- Benachrichtigungen auszulösen falls bestimmte Grenzwerte erreicht werden.
-]]
-
-lucistatistics_collectdexec_enable = "Plugin aktivieren"
-lucistatistics_collectdexecinput = "Kommando zum Werte einlesen hinzufügen"
-lucistatistics_collectdexecinput_desc = [[
- Hier können externe Kommandos definiert werden, welche durch Collectd gestartet
- werden um Statistik-Werte einzulesen. Die Werte werden dabei vom STDOUT des
- aufgerufenen Programmes gelesen.
-]]
-
-lucistatistics_collectdexecinput_cmdline = "Kommandozeile"
-lucistatistics_collectdexecinput_cmduser = "Als Benutzer ausführen"
-lucistatistics_collectdexecinput_cmdgroup = "Als Gruppe ausführen"
-lucistatistics_collectdexecnotify = "Benachrichtigungskommando hinzufügen"
-lucistatistics_collectdexecnotify_desc = [[
- Hier können externe Kommandos definiert werden, welche durch Collectd gestartet
- werden sobald konfigurierte Grenzwerte erreicht werden. Die Werte welche die
- Benachrichtigung ausgelöst haben werden dabei an den STDIN des aufgerufenen
- Programmes übergeben.
-]]
-
-lucistatistics_collectdexecnotify_cmdline = "Kommandozeile"
-lucistatistics_collectdexecnotify_cmduser = "Als Benutzer ausführen"
-lucistatistics_collectdexecnotify_cmdgroup = "Als Gruppe ausführen"
-
--- interface plugin
-lucistatistics_collectdinterface = "Interface Plugin Konfiguration"
-lucistatistics_collectdinterface_desc = "Das Interface-Plugin sammelt allgemeine Verkehrsstatistiken auf ausgewählten Schnittstellen."
-lucistatistics_collectdinterface_enable = "Plugin aktivieren"
-lucistatistics_collectdinterface_interfaces = "Schnittstellen überwachen"
-lucistatistics_collectdinterface_interfaces_desc = "Strg gedrückt halten um mehrere Schnittstellen zu wählen"
-lucistatistics_collectdinterface_ignoreselected = "Alle außer Ausgewählte überwachen"
-
--- iptables plugin
-lucistatistics_collectdiptables = "Iptables Plugin Konfiguration"
-lucistatistics_collectdiptables_desc = [[
- Das Iptables-Plugin überwacht ausgewählte Firewall-Regeln und sammelt Werte über
- die Anzahl der verarbeiteten Pakete und Bytes.
-]]
-
-lucistatistics_collectdiptables_enable = "Plugin aktivieren"
-
-lucistatistics_collectdiptablesmatch = "Auswahlregel hinzufügen"
-lucistatistics_collectdiptablesmatch_desc = [[
- Hier werden die Kriterien festgelegt nach welchen die zu überwachenden
- Firewall-Regeln ausgewählt werden.
-]]
-
-lucistatistics_collectdiptablesmatch_name = "Name der Regel"
-lucistatistics_collectdiptablesmatch_name_desc = "max. 16 Buchstaben"
-lucistatistics_collectdiptablesmatch_table = "Tabelle"
-lucistatistics_collectdiptablesmatch_chain = "Kette (Chain)"
-lucistatistics_collectdiptablesmatch_target = "Aktion (Target)"
-lucistatistics_collectdiptablesmatch_protocol = "Netzwerkprotokoll"
-lucistatistics_collectdiptablesmatch_source = "Quell-IP-Bereich"
-lucistatistics_collectdiptablesmatch_source_desc = "CIDR-Notation"
-lucistatistics_collectdiptablesmatch_destination = "Ziel-IP-Bereich"
-lucistatistics_collectdiptablesmatch_destination_desc = "CIDR-Notation"
-lucistatistics_collectdiptablesmatch_inputif = "eingehende Schnittstelle"
-lucistatistics_collectdiptablesmatch_inputif_desc = "z.B. br-lan"
-lucistatistics_collectdiptablesmatch_outputif = "ausgehende Schnittstelle"
-lucistatistics_collectdiptablesmatch_outputif_desc = "z.B. br-ff"
-lucistatistics_collectdiptablesmatch_options = "Optionen"
-lucistatistics_collectdiptablesmatch_options_desc = "z.B. reject-with tcp-reset"
-
--- irq plugin
-lucistatistics_collectdirq = "IRQ Plugin Konfiguration"
-lucistatistics_collectdirq_desc = [[
- Das IRQ-Plugin überwacht die Anzahl der Aufrufe pro Sekunde für jeden ausgewählten Interrupt.
- Wird kein Interrupt ausgewählt überwacht das Plugin alle im System vorhandenen Interrupts.
-]]
-
-lucistatistics_collectdirq_enable = "Plugin aktivieren"
-lucistatistics_collectdirq_irqs = "Interrups überwachen"
-lucistatistics_collectdirq_irqs_desc = "mehrere mit Leerzeichen trennen"
-lucistatistics_collectdirq_ignoreselected = "Alle außer Ausgewählte überwachen"
-
--- netlink plugin
-lucistatistics_collectdnetlink = "Netlink Plugin Konfiguration"
-lucistatistics_collectdnetlink_desc = [[
- Das Netlink-Plugin sammelt erweiterte QoS-Informationen wie QDisc-, Class- und
- Filter-Statistiken auf ausgewählten Schnittstellen.
-]]
-
-lucistatistics_collectdnetlink_enable = "Plugin aktivieren"
-lucistatistics_collectdnetlink_interfaces = "Schnittstellen einfach überwachen"
-lucistatistics_collectdnetlink_interfaces_desc = "Strg gedrückt halten um mehrere zu wählen"
-lucistatistics_collectdnetlink_verboseinterfaces = "Schnittstellen detailliert überwachen"
-lucistatistics_collectdnetlink_verboseinterfaces_desc = "Strg gedrückt halten um mehrere zu wählen"
-lucistatistics_collectdnetlink_qdiscs = "Queue Discipline überwachen"
-lucistatistics_collectdnetlink_qdiscs_desc = "Strg gedrückt halten um mehrere zu wählen"
-lucistatistics_collectdnetlink_classes = "Shapingklassen überwachen"
-lucistatistics_collectdnetlink_classes_desc = "Strg gedrückt halten um mehrere zu wählen"
-lucistatistics_collectdnetlink_filters = "Filterklassen überwachen"
-lucistatistics_collectdnetlink_filters_desc = "Strg gedrückt halten um mehrere zu wählen"
-
--- network plugin
-lucistatistics_collectdnetwork = "Network Plugin Konfiguration"
-lucistatistics_collectdnetwork_desc = [[
- Das Network-Plugin ermöglicht die netzwerkgestützte Kommunikation zwischen
- verschiedenen Collectd-Instanzen. Collectd kann gleichzeitig im Server- und
- Client-Modus betrieben werden.
- Im Client-Modus werden lokal gesammelte Daten an einen Collectd-Server
- übermittelt, im Server-Modus empfängt die lokale Instanz Daten von anderen
- Installationen.
-]]
-
-lucistatistics_collectdnetwork_enable = "Plugin aktivieren"
-lucistatistics_collectdnetworklisten = "Listen-Schnittstelle"
-lucistatistics_collectdnetworklisten_desc = "Diese Sektion legt fest auf welchen Schnittstellen Collectd auf eingehende Verbindungen wartet."
-lucistatistics_collectdnetworklisten_host = "Listen-Host"
-lucistatistics_collectdnetworklisten_host_desc = "Host-, IP- oder IPv6-Adresse"
-lucistatistics_collectdnetworklisten_port = "Listen-Port"
-lucistatistics_collectdnetworklisten_port_desc = "0 - 65535"
-lucistatistics_collectdnetworkserver = "Server-Schnittstellen"
-lucistatistics_collectdnetworkserver_desc = "Diese Sektion legt fest zu welchen Collectd-Servern die lokal gesammelten Daten gesendet werden."
-lucistatistics_collectdnetworkserver_host = "Server-Host"
-lucistatistics_collectdnetworkserver_host_desc = "Host-, IP- oder IPv6-Adresse"
-lucistatistics_collectdnetworkserver_port = "Server-Port"
-lucistatistics_collectdnetworkserver_port_desc = "0 - 65535"
-lucistatistics_collectdnetwork_timetolive = "TTL für Netzwerkpakete"
-lucistatistics_collectdnetwork_timetolive_desc = "0 - 255"
-lucistatistics_collectdnetwork_forward = "Weiterleitung zwischen Listen- und Server-Adressen"
-lucistatistics_collectdnetwork_cacheflush = "Cache-Leerungsintervall"
-lucistatistics_collectdnetwork_cacheflush_desc = "Sekunden"
-
--- ping plugin
-lucistatistics_collectdping = "Ping Plugin Konfiguration"
-lucistatistics_collectdping_desc = [[
- Das Ping-Plugin sendet ICMP-Echo-Requests an ausgewählte Hosts und misst die
- Antwortzeiten für jede Adresse.
-]]
-
-lucistatistics_collectdping_enable = "Plugin aktivieren"
-lucistatistics_collectdping_hosts = "Hosts überwachen"
-lucistatistics_collectdping_hosts_desc = "mehrere mit Leerzeichen trennen"
-lucistatistics_collectdping_ttl = "TTL für Ping Pakete"
-lucistatistics_collectdping_ttl_desc = "0 - 255"
-
--- Prozesse plugin
-lucistatistics_collectdProzesse = "Prozesse Plugin Konfiguration"
-lucistatistics_collectdProzesse_desc = [[
- Das Prozess-Plugin sammelt Informationen wie CPU-Zeit, Speicherzugriffsfehler und
- Speicherverbrauch ausgewählter Prozesse.
-]]
-
-lucistatistics_collectdProzesse_enable = "Plugin aktivieren"
-lucistatistics_collectdProzesse_processes = "Prozesse überwachen"
-lucistatistics_collectdProzesse_processes_desc = "mehrere mit Leerzeichen trennen"
-
--- rrdtool plugin
-lucistatistics_collectdrrdtool = "RRDTool Plugin Konfiguration"
-lucistatistics_collectdrrdtool_desc = [[
- Das RRDTool-Plugin speichert die gesammelten Daten in sogenannten RRD-Datenbanken,
- der Grundlage für die Diagramm-Bilder.<br /><br />
- <strong>Warnung: Falsche Werte resultieren in einem sehr hohen Speicherverbrauch
- im temporären Verzeichnis. Das kann das Gerät unbrauchbar machen, da Systemspeicher
- für den regulären Betrieb fehlt!</strong>
-]]
-
-lucistatistics_collectdrrdtool_enable = "Plugin aktivieren"
-lucistatistics_collectdrrdtool_datadir = "Speicherverzeichnis"
-lucistatistics_collectdrrdtool_stepsize = "RRD Schrittintervall"
-lucistatistics_collectdrrdtool_stepsize_desc = "Sekunden"
-lucistatistics_collectdrrdtool_heartbeat = "RRD Heartbeatintervall"
-lucistatistics_collectdrrdtool_heartbeat_desc = "Sekunden"
-lucistatistics_collectdrrdtool_rrasingle = "Nur 'average' RRAs erzeugen"
-lucistatistics_collectdrrdtool_rrasingle_desc = "reduziert die RRD Größe"
-lucistatistics_collectdrrdtool_rratimespans = "gespeicherte Zeitspannen"
-lucistatistics_collectdrrdtool_rratimespans_desc = "mehrere mit Leerzeichen trennen"
-lucistatistics_collectdrrdtool_rrarows = "Spalten pro RRA"
-lucistatistics_collectdrrdtool_xff = "RRD XFiles Faktor"
-lucistatistics_collectdrrdtool_cachetimeout = "Zwischenspeicherzeit für gesammelte Daten"
-lucistatistics_collectdrrdtool_cachetimeout_desc = "Sekunden"
-lucistatistics_collectdrrdtool_cacheflush = "Leerungsintervall für Zwischenspeicher"
-lucistatistics_collectdrrdtool_cacheflush_desc = "Sekunden"
-
--- tcpconns plugin
-lucistatistics_collectdtcpconns = "TCPConns Plugin Konfiguration"
-lucistatistics_collectdtcpconns_desc = [[
- Das TCPConns-Plugin sammelt Informationen über offene TCP-Verbindungen
- auf ausgewählten Ports.
-]]
-
-lucistatistics_collectdtcpconns_enable = "Plugin aktivieren"
-lucistatistics_collectdtcpconns_listeningports = "Alle durch lokale Dienste genutzten Ports überwachen"
-lucistatistics_collectdtcpconns_localports = "lokale Ports überwachen"
-lucistatistics_collectdtcpconns_localports_desc = "0 - 65535; mehrere mit Leerzeichen trennen"
-lucistatistics_collectdtcpconns_remoteports = "entfernte Ports überwachen"
-lucistatistics_collectdtcpconns_remoteports_desc = "0 - 65535; mehrere mit Leerzeichen trennen"
-
--- unixsock plugin
-lucistatistics_collectdunixsock = "Unixsock Plugin Konfiguration"
-lucistatistics_collectdunixsock_desc = [[
- Das Unixsock-Plugin erstellt einen Unix-Socket über welchen gesammelte Werte
- aus der laufenden Collectd-Instanz ausgelesen werden können.
-]]
-
-lucistatistics_collectdunixsock_enable = "Plugin aktivieren"
-lucistatistics_collectdunixsock_socketfile = "Dateipfad des Unix-Sockets"
-lucistatistics_collectdunixsock_socketgroup = "Gruppenbesitzer festlegen"
-lucistatistics_collectdunixsock_socketgroup_desc = "Gruppenname"
-lucistatistics_collectdunixsock_socketperms = "Dateiberechtigungen des Unix-Sockets"
-lucistatistics_collectdunixsock_socketperms_desc = "oktal"
-
--- wireless plugin
-lucistatistics_collectdwireless = "Wireless Plugin Konfiguration"
-lucistatistics_collectdwireless_desc = [[
- Das Wireless-Plugin sammelt Statistiken über die drahtlose Signalstärke,
- den Störpegel und die Signalqualität.
-]]
-
-lucistatistics_collectdwireless_enable = "Plugin aktivieren"
-
--- /dev/null
+--[[
+
+Luci i18n translation file for the statistics application - german
+(c) 2008 Freifunk Leipzig / Jo-Philipp Wich <xm@leipzig.freifunk.net>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+$Id$
+
+]]--
+
+
+--
+-- general translations
+--
+
+stat_statistics = "Statistiken"
+stat_systemplugins = "Systemplugins"
+stat_networkplugins = "Netzwerkplugins"
+stat_outputplugins = "Ausgabeplugins"
+stat_showtimespan = "Zeitspanne zeigen »"
+stat_graphs = "Diagramme"
+
+
+--
+-- collectd plugin translations
+--
+
+stat_collectd = "Collectd"
+stat_cpu = "Prozessor"
+stat_ping = "Ping"
+stat_iptables = "Firewall"
+stat_netlink = "Netlink"
+stat_processes = "Prozesse"
+stat_wireless = "Drahtlos"
+stat_tcpconns = "TCP-Verbindungen"
+stat_interface = "Schnittstellen"
+stat_df = "Plattenspeicher"
+stat_irq = "Interrupts"
+stat_disk = "Plattenauslastung"
+stat_exec = "Exec"
+stat_rrdtool = "RRDTool"
+stat_network = "Netzwerk"
+stat_csv = "CSV Ausgabe"
+
+
+--
+-- diagram translations
+--
+
+stat_dg_title_wireless__signal_noise = "%H: Drahtlos - Signal-Noise-Verhältnis"
+stat_dg_label_wireless__signal_noise = "dBm"
+stat_ds_signal_noise = "Noise-Level"
+stat_ds_signal_power = "Signalstärke"
+
+stat_dg_title_wireless__signal_quality = "%H: Drahtlos - Signalqualität"
+stat_dg_label_wireless__signal_quality = "n"
+stat_ds_signal_quality = "Signalqualität"
+
+stat_dg_title_ping = "%H: ICMP Antwortzeiten"
+stat_dg_label_ping = "ms"
+stat_ds_ping = "%di"
+
+stat_dg_title_iptables__ipt_packets = "%H: Firewall - Verarbeitete Pakete"
+stat_dg_label_iptables__ipt_packets = "Pakete/s"
+stat_ds_ipt_packets = 'Kette "%di"'
+
+stat_dg_title_netlink__if_octets = "%H: Netlink - Transfer auf %pi"
+stat_dg_label_netlink__if_octets = "Bytes/s"
+stat_ds_if_octets = "Bytes (%ds)"
+
+stat_dg_title_netlink__if_packets = "%H: Netlink - Pakete auf %pi"
+stat_dg_label_netlink__if_packets = "Pakete/s"
+stat_ds_if_packets = "Verarbeitet (%ds)"
+stat_ds_if_dropped = "Verworfen (%ds)"
+stat_ds_if_errors = "Fehler (%ds)"
+
+stat_dg_title_netlink__if_multicast = "%H: Netlink - Multicast auf %pi"
+stat_dg_label_netlink__if_multicast = "Pakete/s"
+stat_ds_if_multicast = "Pakete"
+
+stat_dg_title_netlink__if_collisions = "%H: Netlink - Kollisionen auf %pi"
+stat_dg_label_netlink__if_collisions = "Kollisionen/s"
+stat_ds_if_collisions = "Kollisionen"
+
+stat_dg_title_netlink__if_tx_errors = "%H: Netlink - Fehler auf %pi"
+stat_dg_label_netlink__if_tx_errors = "Fehler/s"
+stat_ds_if_tx_errors = "%di"
+stat_ds_if_rx_errors = "%di"
+
+stat_dg_title_processes = "%H: Prozesse"
+stat_dg_label_processes = "Prozesse/s"
+stat_ds_ps_state = "%di"
+
+stat_dg_title_processes__ps_cputime = "%H: Prozess %pi - Verbrauchte CPU Zeit"
+stat_dg_label_processes__ps_cputime = "Jiffies"
+stat_ds_ps_cputime__syst = "System"
+stat_ds_ps_cputime__user = "User"
+
+stat_dg_title_processes__ps_count = "%H: Prozess %pi - Threads und Prozesse"
+stat_dg_label_processes__ps_count = "Anzahl"
+stat_ds_ps_count = "%ds"
+
+stat_dg_title_processes__ps_pagefaults = "%H: Prozess %pi - Speicherzugriffsfehler"
+stat_dg_label_processes__ps_pagefaults = "Zugriffsfehler"
+stat_ds_ps_pagefaults = "Zugriffsfehler"
+
+stat_dg_title_processes__ps_rss = "%H: Process %pi - Virtueller Speicher"
+stat_dg_label_processes__ps_rss = "Bytes"
+stat_ds_ps_rss = "virtueller Speicher"
+
+stat_dg_title_cpu = "%H: Auslastung auf Prozessor #%pi"
+stat_dg_label_cpu = "%"
+stat_ds_cpu = "%di"
+
+stat_dg_title_interface__if_octets = "%H: Transfer auf %di"
+stat_dg_label_interface__if_octets = "Bytes/s"
+
+stat_dg_title_interface__if_packets = "%H: Pakete auf %di"
+stat_dg_label_interface__if_packets = "Pakete/s"
+
+stat_dg_title_tcpconns = "%H: TCP-Verbindungen auf Port %pi"
+stat_dg_label_tcpconns = "Verbindungen/s"
+stat_ds_tcp_connections = "%di"
+
+stat_dg_title_df = "%H: Speicherverbrauch auf %di"
+stat_dg_label_df = "Bytes"
+stat_ds_df__free = "verfügbar"
+stat_ds_df__used = "belegt "
+
+stat_dg_title_irq = "%H: Interrupts"
+stat_dg_label_irq = "Aufrufe/s"
+stat_ds_irq = "IRQ %di"
+
+
+--
+-- CBI translations
+--
+
+lucistatistics = "Statistiken"
+
+-- general config
+lucistatistics_collectd = "Collectd Einstellungen"
+lucistatistics_collectd_desc = [[
+ Collectd ist ein schlankes Dienstprogramm zum Sammeln von Systemdaten aus verschiedenen Quellen mittels diverser Plugins.
+ Auf dieser Seite können generelle Einstellungen für den Collectd-Daemon vorgenommen werden.
+]]
+
+lucistatistics_collectd_hostname = "Hostname"
+lucistatistics_collectd_basedir = "Basisverzeichnis"
+lucistatistics_collectd_include = "Verzeichnis für Unterkonfigurationen"
+lucistatistics_collectd_plugindir = "Verzeichnis für Collectd-Plugins"
+lucistatistics_collectd_pidfile = "Pfad zu PID-Datei"
+lucistatistics_collectd_typesdb = "Dataset-Definitionen"
+lucistatistics_collectd_interval = "Daten-Sammelintervall"
+lucistatistics_collectd_interval_desc = "Sekunden"
+lucistatistics_collectd_readthreads = "Anzahl paralleler Sammelprozesse"
+lucistatistics_collectd_fqdnlookup = "automatisch vollen Hostnamen herausfinden"
+
+-- cpu plugin
+lucistatistics_collectdcpu = "CPU Plugin Konfiguration"
+lucistatistics_collectdcpu_desc = "Das CPU-Plugin sammelt grundlegende Statistiken über die Prozessorauslastung."
+lucistatistics_collectdcpu_enable = "Plugin aktivieren"
+
+-- csv plugin
+lucistatistics_collectdcsv = "CSV Plugin Konfiguration"
+lucistatistics_collectdcsv_desc = [[
+ Das CSV-Plugin speichert die gesammelten Daten im CSV-Format,
+ geeignet für die Weiterverarbeitung durch externe Programme.
+]]
+
+lucistatistics_collectdcsv_enable = "Plugin aktivieren"
+lucistatistics_collectdcsv_datadir = "Speicherverzeichnis für die CSV-Dateien"
+lucistatistics_collectdcsv_storerates = "Werte nicht absolut sondern als Raten speichern"
+
+-- df plugin
+lucistatistics_collectddf = "DF Plugin Konfiguration"
+lucistatistics_collectddf_desc = "Das DF-Plugin sammelt Statistiken über den Speicherverbrauch auf verschiedenen Geräten, Mount-Punkten oder Dateisystemtypen."
+lucistatistics_collectddf_enable = "Plugin aktivieren"
+lucistatistics_collectddf_devices = "Geräte überwachen"
+lucistatistics_collectddf_devices_desc = "mehrere mit Leerzeichen trennen"
+lucistatistics_collectddf_mountpoints = "Mount-Punkte überwachen"
+lucistatistics_collectddf_mountpoints_desc = "mehrere mit Leerzeichen trennen"
+lucistatistics_collectddf_fstypes = "Datesystemtypen überwachen"
+lucistatistics_collectddf_fstypes_desc = "mehrere mit Leerzeichen trennen"
+lucistatistics_collectddf_ignoreselected = "Alle außer Ausgewählte überwachen"
+
+-- disk plugin
+lucistatistics_collectddisk = "Disk Plugin Konfiguration"
+lucistatistics_collectddisk_desc = "Das Disk-Plugin sammelt detaillierte Statistiken über die Auslastung auf ausgewählten Festplatten und Partitionen."
+lucistatistics_collectddisk_enable = "Plugin aktivieren"
+lucistatistics_collectddisk_disks = "Geräte und Partitionen überwachen"
+lucistatistics_collectddisk_disks_desc = "mehrere mit Leerzeichen trennen"
+lucistatistics_collectddisk_ignoreselected = "Alle außer Ausgewählte überwachen"
+
+-- dns plugin
+lucistatistics_collectddns = "DNS Plugin Konfiguration"
+lucistatistics_collectddns_desc = "Das DNS-Plugin sammelt detaillierte Statistiken über DNS-bezogenen Verkehr auf ausgewählten Schnittstellen."
+lucistatistics_collectddns_enable = "Plugin aktivieren"
+lucistatistics_collectddns_interfaces = "Schnittstellen überwachen"
+lucistatistics_collectddns_interfaces_desc = "mehrere mit Leerzeichen trennen"
+lucistatistics_collectddns_ignoresources = "Quelladressen ignorieren"
+lucistatistics_collectddns_ignoresources_desc = "mehrere mit Leerzeichen trennen"
+
+-- email plugin
+lucistatistics_collectdemail = "E-Mail Plugin Konfiguration"
+lucistatistics_collectdemail_desc = [[
+ Das E-Mail Plugin erstellt einen Unix-Socket welcher benutzt werden kann
+ um E-Mail-Statistiken an den laufenden Collectd-Daemon zu übermitteln.
+ Dieses Plugin ist primär für die Verwendung zusammen mit
+ Mail::SpamAssasin::Plugin::Collectd gedacht, kann aber auch anderweitig
+ verwendet werden.
+]]
+
+lucistatistics_collectdemail_enable = "Plugin aktivieren"
+lucistatistics_collectdemail_socketfile = "Dateipfad des Unix-Sockets"
+lucistatistics_collectdemail_socketgroup = "Gruppenbesitzer festlegen"
+lucistatistics_collectdemail_socketgroup_desc = "Gruppenname"
+lucistatistics_collectdemail_socketperms = "Dateiberechtigungen des Unix-Sockets"
+lucistatistics_collectdemail_socketperms_desc = "oktal"
+lucistatistics_collectdemail_maxconns = "Maximale Anzahl erlaubter Verbindungen"
+
+-- exec plugin
+lucistatistics_collectdexec = "Exec Plugin Konfiguration"
+lucistatistics_collectdexec_desc = [[
+ Das Exec-Plugin startet externe Kommandos um Werte einzulesen oder um
+ Benachrichtigungen auszulösen falls bestimmte Grenzwerte erreicht werden.
+]]
+
+lucistatistics_collectdexec_enable = "Plugin aktivieren"
+lucistatistics_collectdexecinput = "Kommando zum Werte einlesen hinzufügen"
+lucistatistics_collectdexecinput_desc = [[
+ Hier können externe Kommandos definiert werden, welche durch Collectd gestartet
+ werden um Statistik-Werte einzulesen. Die Werte werden dabei vom STDOUT des
+ aufgerufenen Programmes gelesen.
+]]
+
+lucistatistics_collectdexecinput_cmdline = "Kommandozeile"
+lucistatistics_collectdexecinput_cmduser = "Als Benutzer ausführen"
+lucistatistics_collectdexecinput_cmdgroup = "Als Gruppe ausführen"
+lucistatistics_collectdexecnotify = "Benachrichtigungskommando hinzufügen"
+lucistatistics_collectdexecnotify_desc = [[
+ Hier können externe Kommandos definiert werden, welche durch Collectd gestartet
+ werden sobald konfigurierte Grenzwerte erreicht werden. Die Werte welche die
+ Benachrichtigung ausgelöst haben werden dabei an den STDIN des aufgerufenen
+ Programmes übergeben.
+]]
+
+lucistatistics_collectdexecnotify_cmdline = "Kommandozeile"
+lucistatistics_collectdexecnotify_cmduser = "Als Benutzer ausführen"
+lucistatistics_collectdexecnotify_cmdgroup = "Als Gruppe ausführen"
+
+-- interface plugin
+lucistatistics_collectdinterface = "Interface Plugin Konfiguration"
+lucistatistics_collectdinterface_desc = "Das Interface-Plugin sammelt allgemeine Verkehrsstatistiken auf ausgewählten Schnittstellen."
+lucistatistics_collectdinterface_enable = "Plugin aktivieren"
+lucistatistics_collectdinterface_interfaces = "Schnittstellen überwachen"
+lucistatistics_collectdinterface_interfaces_desc = "Strg gedrückt halten um mehrere Schnittstellen zu wählen"
+lucistatistics_collectdinterface_ignoreselected = "Alle außer Ausgewählte überwachen"
+
+-- iptables plugin
+lucistatistics_collectdiptables = "Iptables Plugin Konfiguration"
+lucistatistics_collectdiptables_desc = [[
+ Das Iptables-Plugin überwacht ausgewählte Firewall-Regeln und sammelt Werte über
+ die Anzahl der verarbeiteten Pakete und Bytes.
+]]
+
+lucistatistics_collectdiptables_enable = "Plugin aktivieren"
+
+lucistatistics_collectdiptablesmatch = "Auswahlregel hinzufügen"
+lucistatistics_collectdiptablesmatch_desc = [[
+ Hier werden die Kriterien festgelegt nach welchen die zu überwachenden
+ Firewall-Regeln ausgewählt werden.
+]]
+
+lucistatistics_collectdiptablesmatch_name = "Name der Regel"
+lucistatistics_collectdiptablesmatch_name_desc = "max. 16 Buchstaben"
+lucistatistics_collectdiptablesmatch_table = "Tabelle"
+lucistatistics_collectdiptablesmatch_chain = "Kette (Chain)"
+lucistatistics_collectdiptablesmatch_target = "Aktion (Target)"
+lucistatistics_collectdiptablesmatch_protocol = "Netzwerkprotokoll"
+lucistatistics_collectdiptablesmatch_source = "Quell-IP-Bereich"
+lucistatistics_collectdiptablesmatch_source_desc = "CIDR-Notation"
+lucistatistics_collectdiptablesmatch_destination = "Ziel-IP-Bereich"
+lucistatistics_collectdiptablesmatch_destination_desc = "CIDR-Notation"
+lucistatistics_collectdiptablesmatch_inputif = "eingehende Schnittstelle"
+lucistatistics_collectdiptablesmatch_inputif_desc = "z.B. br-lan"
+lucistatistics_collectdiptablesmatch_outputif = "ausgehende Schnittstelle"
+lucistatistics_collectdiptablesmatch_outputif_desc = "z.B. br-ff"
+lucistatistics_collectdiptablesmatch_options = "Optionen"
+lucistatistics_collectdiptablesmatch_options_desc = "z.B. reject-with tcp-reset"
+
+-- irq plugin
+lucistatistics_collectdirq = "IRQ Plugin Konfiguration"
+lucistatistics_collectdirq_desc = [[
+ Das IRQ-Plugin überwacht die Anzahl der Aufrufe pro Sekunde für jeden ausgewählten Interrupt.
+ Wird kein Interrupt ausgewählt überwacht das Plugin alle im System vorhandenen Interrupts.
+]]
+
+lucistatistics_collectdirq_enable = "Plugin aktivieren"
+lucistatistics_collectdirq_irqs = "Interrups überwachen"
+lucistatistics_collectdirq_irqs_desc = "mehrere mit Leerzeichen trennen"
+lucistatistics_collectdirq_ignoreselected = "Alle außer Ausgewählte überwachen"
+
+-- netlink plugin
+lucistatistics_collectdnetlink = "Netlink Plugin Konfiguration"
+lucistatistics_collectdnetlink_desc = [[
+ Das Netlink-Plugin sammelt erweiterte QoS-Informationen wie QDisc-, Class- und
+ Filter-Statistiken auf ausgewählten Schnittstellen.
+]]
+
+lucistatistics_collectdnetlink_enable = "Plugin aktivieren"
+lucistatistics_collectdnetlink_interfaces = "Schnittstellen einfach überwachen"
+lucistatistics_collectdnetlink_interfaces_desc = "Strg gedrückt halten um mehrere zu wählen"
+lucistatistics_collectdnetlink_verboseinterfaces = "Schnittstellen detailliert überwachen"
+lucistatistics_collectdnetlink_verboseinterfaces_desc = "Strg gedrückt halten um mehrere zu wählen"
+lucistatistics_collectdnetlink_qdiscs = "Queue Discipline überwachen"
+lucistatistics_collectdnetlink_qdiscs_desc = "Strg gedrückt halten um mehrere zu wählen"
+lucistatistics_collectdnetlink_classes = "Shapingklassen überwachen"
+lucistatistics_collectdnetlink_classes_desc = "Strg gedrückt halten um mehrere zu wählen"
+lucistatistics_collectdnetlink_filters = "Filterklassen überwachen"
+lucistatistics_collectdnetlink_filters_desc = "Strg gedrückt halten um mehrere zu wählen"
+
+-- network plugin
+lucistatistics_collectdnetwork = "Network Plugin Konfiguration"
+lucistatistics_collectdnetwork_desc = [[
+ Das Network-Plugin ermöglicht die netzwerkgestützte Kommunikation zwischen
+ verschiedenen Collectd-Instanzen. Collectd kann gleichzeitig im Server- und
+ Client-Modus betrieben werden.
+ Im Client-Modus werden lokal gesammelte Daten an einen Collectd-Server
+ übermittelt, im Server-Modus empfängt die lokale Instanz Daten von anderen
+ Installationen.
+]]
+
+lucistatistics_collectdnetwork_enable = "Plugin aktivieren"
+lucistatistics_collectdnetworklisten = "Listen-Schnittstelle"
+lucistatistics_collectdnetworklisten_desc = "Diese Sektion legt fest auf welchen Schnittstellen Collectd auf eingehende Verbindungen wartet."
+lucistatistics_collectdnetworklisten_host = "Listen-Host"
+lucistatistics_collectdnetworklisten_host_desc = "Host-, IP- oder IPv6-Adresse"
+lucistatistics_collectdnetworklisten_port = "Listen-Port"
+lucistatistics_collectdnetworklisten_port_desc = "0 - 65535"
+lucistatistics_collectdnetworkserver = "Server-Schnittstellen"
+lucistatistics_collectdnetworkserver_desc = "Diese Sektion legt fest zu welchen Collectd-Servern die lokal gesammelten Daten gesendet werden."
+lucistatistics_collectdnetworkserver_host = "Server-Host"
+lucistatistics_collectdnetworkserver_host_desc = "Host-, IP- oder IPv6-Adresse"
+lucistatistics_collectdnetworkserver_port = "Server-Port"
+lucistatistics_collectdnetworkserver_port_desc = "0 - 65535"
+lucistatistics_collectdnetwork_timetolive = "TTL für Netzwerkpakete"
+lucistatistics_collectdnetwork_timetolive_desc = "0 - 255"
+lucistatistics_collectdnetwork_forward = "Weiterleitung zwischen Listen- und Server-Adressen"
+lucistatistics_collectdnetwork_cacheflush = "Cache-Leerungsintervall"
+lucistatistics_collectdnetwork_cacheflush_desc = "Sekunden"
+
+-- ping plugin
+lucistatistics_collectdping = "Ping Plugin Konfiguration"
+lucistatistics_collectdping_desc = [[
+ Das Ping-Plugin sendet ICMP-Echo-Requests an ausgewählte Hosts und misst die
+ Antwortzeiten für jede Adresse.
+]]
+
+lucistatistics_collectdping_enable = "Plugin aktivieren"
+lucistatistics_collectdping_hosts = "Hosts überwachen"
+lucistatistics_collectdping_hosts_desc = "mehrere mit Leerzeichen trennen"
+lucistatistics_collectdping_ttl = "TTL für Ping Pakete"
+lucistatistics_collectdping_ttl_desc = "0 - 255"
+
+-- Prozesse plugin
+lucistatistics_collectdProzesse = "Prozesse Plugin Konfiguration"
+lucistatistics_collectdProzesse_desc = [[
+ Das Prozess-Plugin sammelt Informationen wie CPU-Zeit, Speicherzugriffsfehler und
+ Speicherverbrauch ausgewählter Prozesse.
+]]
+
+lucistatistics_collectdProzesse_enable = "Plugin aktivieren"
+lucistatistics_collectdProzesse_processes = "Prozesse überwachen"
+lucistatistics_collectdProzesse_processes_desc = "mehrere mit Leerzeichen trennen"
+
+-- rrdtool plugin
+lucistatistics_collectdrrdtool = "RRDTool Plugin Konfiguration"
+lucistatistics_collectdrrdtool_desc = [[
+ Das RRDTool-Plugin speichert die gesammelten Daten in sogenannten RRD-Datenbanken,
+ der Grundlage für die Diagramm-Bilder.<br /><br />
+ <strong>Warnung: Falsche Werte resultieren in einem sehr hohen Speicherverbrauch
+ im temporären Verzeichnis. Das kann das Gerät unbrauchbar machen, da Systemspeicher
+ für den regulären Betrieb fehlt!</strong>
+]]
+
+lucistatistics_collectdrrdtool_enable = "Plugin aktivieren"
+lucistatistics_collectdrrdtool_datadir = "Speicherverzeichnis"
+lucistatistics_collectdrrdtool_stepsize = "RRD Schrittintervall"
+lucistatistics_collectdrrdtool_stepsize_desc = "Sekunden"
+lucistatistics_collectdrrdtool_heartbeat = "RRD Heartbeatintervall"
+lucistatistics_collectdrrdtool_heartbeat_desc = "Sekunden"
+lucistatistics_collectdrrdtool_rrasingle = "Nur 'average' RRAs erzeugen"
+lucistatistics_collectdrrdtool_rrasingle_desc = "reduziert die RRD Größe"
+lucistatistics_collectdrrdtool_rratimespans = "gespeicherte Zeitspannen"
+lucistatistics_collectdrrdtool_rratimespans_desc = "mehrere mit Leerzeichen trennen"
+lucistatistics_collectdrrdtool_rrarows = "Spalten pro RRA"
+lucistatistics_collectdrrdtool_xff = "RRD XFiles Faktor"
+lucistatistics_collectdrrdtool_cachetimeout = "Zwischenspeicherzeit für gesammelte Daten"
+lucistatistics_collectdrrdtool_cachetimeout_desc = "Sekunden"
+lucistatistics_collectdrrdtool_cacheflush = "Leerungsintervall für Zwischenspeicher"
+lucistatistics_collectdrrdtool_cacheflush_desc = "Sekunden"
+
+-- tcpconns plugin
+lucistatistics_collectdtcpconns = "TCPConns Plugin Konfiguration"
+lucistatistics_collectdtcpconns_desc = [[
+ Das TCPConns-Plugin sammelt Informationen über offene TCP-Verbindungen
+ auf ausgewählten Ports.
+]]
+
+lucistatistics_collectdtcpconns_enable = "Plugin aktivieren"
+lucistatistics_collectdtcpconns_listeningports = "Alle durch lokale Dienste genutzten Ports überwachen"
+lucistatistics_collectdtcpconns_localports = "lokale Ports überwachen"
+lucistatistics_collectdtcpconns_localports_desc = "0 - 65535; mehrere mit Leerzeichen trennen"
+lucistatistics_collectdtcpconns_remoteports = "entfernte Ports überwachen"
+lucistatistics_collectdtcpconns_remoteports_desc = "0 - 65535; mehrere mit Leerzeichen trennen"
+
+-- unixsock plugin
+lucistatistics_collectdunixsock = "Unixsock Plugin Konfiguration"
+lucistatistics_collectdunixsock_desc = [[
+ Das Unixsock-Plugin erstellt einen Unix-Socket über welchen gesammelte Werte
+ aus der laufenden Collectd-Instanz ausgelesen werden können.
+]]
+
+lucistatistics_collectdunixsock_enable = "Plugin aktivieren"
+lucistatistics_collectdunixsock_socketfile = "Dateipfad des Unix-Sockets"
+lucistatistics_collectdunixsock_socketgroup = "Gruppenbesitzer festlegen"
+lucistatistics_collectdunixsock_socketgroup_desc = "Gruppenname"
+lucistatistics_collectdunixsock_socketperms = "Dateiberechtigungen des Unix-Sockets"
+lucistatistics_collectdunixsock_socketperms_desc = "oktal"
+
+-- wireless plugin
+lucistatistics_collectdwireless = "Wireless Plugin Konfiguration"
+lucistatistics_collectdwireless_desc = [[
+ Das Wireless-Plugin sammelt Statistiken über die drahtlose Signalstärke,
+ den Störpegel und die Signalqualität.
+]]
+
+lucistatistics_collectdwireless_enable = "Plugin aktivieren"
+
+++ /dev/null
---[[
-
-Luci i18n translation file for the statistics application
-(c) 2008 Freifunk Leipzig / Jo-Philipp Wich <xm@leipzig.freifunk.net>
-
-Licensed under the Apache License, Version 2.0 (the "License");
-you may not use this file except in compliance with the License.
-You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
-$Id$
-
-]]--
-
-
---
--- general translations
---
-
-stat_statistics = "Statistics"
-stat_systemplugins = "System plugins"
-stat_networkplugins = "Network plugins"
-stat_outputplugins = "Output plugins"
-stat_showtimespan = "Display timespan »"
-stat_graphs = "Graphs"
-
-
---
--- collectd plugin translations
---
-
-stat_collectd = "Collectd"
-stat_cpu = "Processor"
-stat_ping = "Ping"
-stat_iptables = "Firewall"
-stat_netlink = "Netlink"
-stat_processes = "Processes"
-stat_wireless = "Wireless"
-stat_tcpconns = "TCP Connections"
-stat_interface = "Interfaces"
-stat_df = "Disk Space Usage"
-stat_irq = "Interrupts"
-stat_disk = "Disk Usage"
-stat_exec = "Exec"
-stat_rrdtool = "RRDTool"
-stat_network = "Network"
-stat_csv = "CSV Output"
-
-
---
--- diagram translations
---
-
-stat_dg_title_wireless__signal_noise = "%H: Wireless - Signal Noise Ratio"
-stat_dg_label_wireless__signal_noise = "dBm"
-stat_ds_signal_noise = "Noise Level"
-stat_ds_signal_power = "Signal Strength"
-
-stat_dg_title_wireless__signal_quality = "%H: Wireless - Signal Quality"
-stat_dg_label_wireless__signal_quality = "n"
-stat_ds_signal_quality = "Signal Quality"
-
-stat_dg_title_ping = "%H: ICMP Roundtrip Times"
-stat_dg_label_ping = "ms"
-stat_ds_ping = "%di"
-
-stat_dg_title_iptables__ipt_packets = "%H: Firewall - Processed Packets"
-stat_dg_label_iptables__ipt_packets = "Packets/s"
-stat_ds_ipt_packets = 'Chain "%di"'
-
-stat_dg_title_netlink__if_octets = "%H: Netlink - Transfer on %pi"
-stat_dg_label_netlink__if_octets = "Bytes/s"
-stat_ds_if_octets = "Bytes (%ds)"
-
-stat_dg_title_netlink__if_packets = "%H: Netlink - Packets on %pi"
-stat_dg_label_netlink__if_packets = "Packets/s"
-stat_ds_if_packets = "Processed (%ds)"
-stat_ds_if_dropped = "Dropped (%ds)"
-stat_ds_if_errors = "Errors (%ds)"
-
-stat_dg_title_netlink__if_multicast = "%H: Netlink - Multicast on %pi"
-stat_dg_label_netlink__if_multicast = "Packets/s"
-stat_ds_if_multicast = "Packets"
-
-stat_dg_title_netlink__if_collisions = "%H: Netlink - Collisions on %pi"
-stat_dg_label_netlink__if_collisions = "Collisions/s"
-stat_ds_if_collisions = "Collisions"
-
-stat_dg_title_netlink__if_tx_errors = "%H: Netlink - Errors on %pi"
-stat_dg_label_netlink__if_tx_errors = "Errors/s"
-stat_ds_if_tx_errors = "%di"
-stat_ds_if_rx_errors = "%di"
-
-stat_dg_title_processes = "%H: Processes"
-stat_dg_label_processes = "Processes/s"
-stat_ds_ps_state = "%di"
-
-stat_dg_title_processes__ps_cputime = "%H: Process %pi - used cpu time"
-stat_dg_label_processes__ps_cputime = "Jiffies"
-stat_ds_ps_cputime__syst = "system"
-stat_ds_ps_cputime__user = "user"
-
-stat_dg_title_processes__ps_count = "%H: Process %pi - threads and processes"
-stat_dg_label_processes__ps_count = "Count"
-stat_ds_ps_count = "%ds"
-
-stat_dg_title_processes__ps_pagefaults = "%H: Process %pi - page faults"
-stat_dg_label_processes__ps_pagefaults = "Pagefaults"
-stat_ds_ps_pagefaults = "page faults"
-
-stat_dg_title_processes__ps_rss = "%H: Process %pi - virtual memory size"
-stat_dg_label_processes__ps_rss = "Bytes"
-stat_ds_ps_rss = "virtual memory"
-
-stat_dg_title_cpu = "%H: Usage on Processor #%pi"
-stat_dg_label_cpu = "%"
-stat_ds_cpu = "%di"
-
-stat_dg_title_interface__if_octets = "%H: Transfer on %di"
-stat_dg_label_interface__if_octets = "Bytes/s"
-
-stat_dg_title_interface__if_packets = "%H: Packets on %di"
-stat_dg_label_interface__if_packets = "Packets/s"
-
-stat_dg_title_tcpconns = "%H: TCP-Connections to Port %pi"
-stat_dg_label_tcpconns = "Connections/s"
-stat_ds_tcp_connections = "%di"
-
-stat_dg_title_df = "%H: Disk Space Usage on %di"
-stat_dg_label_df = "Bytes"
-stat_ds_df__free = "%ds"
-stat_ds_df__used = "%ds"
-
-stat_dg_title_irq = "%H: Interrupts"
-stat_dg_label_irq = "Issues/s"
-stat_ds_irq = "IRQ %di"
-
-
---
--- CBI translations
---
-
-lucistatistics = "Statistics"
-
--- general config
-lucistatistics_collectd = "Collectd Settings"
-lucistatistics_collectd_desc = [[
- Collectd is a small daeomon for collecting data from various sources through different plugins.
- On this page you can change general settings for the collectd daemon.
-]]
-
-lucistatistics_collectd_hostname = "Hostname"
-lucistatistics_collectd_basedir = "Base Directory"
-lucistatistics_collectd_include = "Directory for sub-configurations"
-lucistatistics_collectd_plugindir = "Directory for collectd plugins"
-lucistatistics_collectd_pidfile = "Used PID file"
-lucistatistics_collectd_typesdb = "Datasets definition file"
-lucistatistics_collectd_interval = "Data collection interval"
-lucistatistics_collectd_interval_desc = "Seconds"
-lucistatistics_collectd_readthreads = "Number of threads for data collection"
-lucistatistics_collectd_fqdnlookup = "Try to lookup fully qualified hostname"
-
--- cpu plugin
-lucistatistics_collectdcpu = "CPU Plugin Configuration"
-lucistatistics_collectdcpu_desc = "The cpu plugin collects basic statistics about the processor usage."
-lucistatistics_collectdcpu_enable = "Enable this plugin"
-
--- csv plugin
-lucistatistics_collectdcsv = "CSV Plugin Configuration"
-lucistatistics_collectdcsv_desc = "The csv plugin stores collected data in csv file format for further processing by external programs."
-lucistatistics_collectdcsv_enable = "Enable this plugin"
-lucistatistics_collectdcsv_datadir = "Storage directory for the csv files"
-lucistatistics_collectdcsv_storerates = "Store data values as rates instead of absolute values"
-
--- df plugin
-lucistatistics_collectddf = "DF Plugin Configuration"
-lucistatistics_collectddf_desc = "The df plugin collects statistics about the disk space usage on different devices, mount points or filesystem types."
-lucistatistics_collectddf_enable = "Enable this plugin"
-lucistatistics_collectddf_devices = "Monitor devices"
-lucistatistics_collectddf_devices_desc = "multiple separated by space"
-lucistatistics_collectddf_mountpoints = "Monitor mount points"
-lucistatistics_collectddf_mountpoints_desc = "multiple separated by space"
-lucistatistics_collectddf_fstypes = "Monitor filesystem types"
-lucistatistics_collectddf_fstypes_desc = "multiple separated by space"
-lucistatistics_collectddf_ignoreselected = "Monitor all except selected ones"
-
--- disk plugin
-lucistatistics_collectddisk = "Disk Plugin Configuration"
-lucistatistics_collectddisk_desc = "The disk plugin collects detailled usage statistics for selected partitions or whole disks."
-lucistatistics_collectddisk_enable = "Enable this plugin"
-lucistatistics_collectddisk_disks = "Monitor disks and partitions"
-lucistatistics_collectddisk_disks_desc = "multiple separated by space"
-lucistatistics_collectddisk_ignoreselected = "Monitor all except selected ones"
-
--- dns plugin
-lucistatistics_collectddns = "DNS Plugin Configuration"
-lucistatistics_collectddns_desc = "The dns plugin collects detailled statistics about dns related traffic on selected interfaces."
-lucistatistics_collectddns_enable = "Enable this plugin"
-lucistatistics_collectddns_interfaces = "Monitor interfaces"
-lucistatistics_collectddns_interfaces_desc = "multiple separated by space"
-lucistatistics_collectddns_ignoresources = "Ignore source addresses"
-lucistatistics_collectddns_ignoresources_desc = "multiple separated by space"
-
--- email plugin
-lucistatistics_collectdemail = "E-Mail Plugin Configuration"
-lucistatistics_collectdemail_desc = [[
- The email plugin creates a unix socket which can be used to transmit
- email-statistics to a running collectd daemon. This plugin is primarily
- intended to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd
- but can be used in other ways as well.
-]]
-
-lucistatistics_collectdemail_enable = "Enable this plugin"
-lucistatistics_collectdemail_socketfile = "Filepath of the unix socket"
-lucistatistics_collectdemail_socketgroup = "Group ownership of the unix socket"
-lucistatistics_collectdemail_socketgroup_desc = "group name"
-lucistatistics_collectdemail_socketperms = "File permissions of the unix socket"
-lucistatistics_collectdemail_socketperms_desc = "octal"
-lucistatistics_collectdemail_maxconns = "Maximum allowed connections"
-
--- exec plugin
-lucistatistics_collectdexec = "Exec Plugin Configuration"
-lucistatistics_collectdexec_desc = [[
- The exec plugin starts external commands to read values from or
- to notify external processes when certain threshold values have
- been reached.
-]]
-
-lucistatistics_collectdexec_enable = "Enable this plugin"
-lucistatistics_collectdexecinput = "Add command for reading values"
-lucistatistics_collectdexecinput_desc = [[
- Here you can define external commands which will be started by collectd in order
- to read certain values. The values will be read from stdout.
-]]
-
-lucistatistics_collectdexecinput_cmdline = "Commandline"
-lucistatistics_collectdexecinput_cmduser = "Run as user"
-lucistatistics_collectdexecinput_cmdgroup = "Run as group"
-lucistatistics_collectdexecnotify = "Add notification command"
-lucistatistics_collectdexecnotify_desc = [[
- Here you can define external commands which will be started by collectd
- when certain threshold values have been reached. The values leading to
- invokation will be feeded to the the called programs stdin.
-]]
-
-lucistatistics_collectdexecnotify_cmdline = "Commandline"
-lucistatistics_collectdexecnotify_cmduser = "Run as user"
-lucistatistics_collectdexecnotify_cmdgroup = "Run as group"
-
--- interface plugin
-lucistatistics_collectdinterface = "Interface Plugin Configuration"
-lucistatistics_collectdinterface_desc = "The interface plugin collects traffic statistics on selected interfaces."
-lucistatistics_collectdinterface_enable = "Enable this plugin"
-lucistatistics_collectdinterface_interfaces = "Monitor interfaces"
-lucistatistics_collectdinterface_interfaces_desc = "hold Ctrl while clicking to select multiple interfaces"
-lucistatistics_collectdinterface_ignoreselected = "Monitor all except selected ones"
-
--- iptables plugin
-lucistatistics_collectdiptables = "Iptables Plugin Configuration"
-lucistatistics_collectdiptables_desc = [[
- The iptables plugin will monitor selected firewall rules and collect
- informations about processed bytes and packets per rule.
-]]
-
-lucistatistics_collectdiptables_enable = "Enable this plugin"
-
-lucistatistics_collectdiptablesmatch = "Add matching rule"
-lucistatistics_collectdiptablesmatch_desc = [[
- Here you can define various criteria by which the monitored
- iptables rules are selected.
-]]
-
-lucistatistics_collectdiptablesmatch_name = "Name of the rule"
-lucistatistics_collectdiptablesmatch_name_desc = "max. 16 chars"
-lucistatistics_collectdiptablesmatch_table = "Table"
-lucistatistics_collectdiptablesmatch_chain = "Chain"
-lucistatistics_collectdiptablesmatch_target = "Action (target)"
-lucistatistics_collectdiptablesmatch_protocol = "Network protocol"
-lucistatistics_collectdiptablesmatch_source = "Source ip range"
-lucistatistics_collectdiptablesmatch_source_desc = "CIDR notation"
-lucistatistics_collectdiptablesmatch_destination = "Destination ip range"
-lucistatistics_collectdiptablesmatch_destination_desc = "CIDR notation"
-lucistatistics_collectdiptablesmatch_inputif = "Incoming interface"
-lucistatistics_collectdiptablesmatch_inputif_desc = "e.g. br-lan"
-lucistatistics_collectdiptablesmatch_outputif = "Outgoing interface"
-lucistatistics_collectdiptablesmatch_outputif_desc = "e.g. br-ff"
-lucistatistics_collectdiptablesmatch_options = "Options"
-lucistatistics_collectdiptablesmatch_options_desc = "e.g. reject-with tcp-reset"
-
--- irq plugin
-lucistatistics_collectdirq = "IRQ Plugin Configuration"
-lucistatistics_collectdirq_desc = [[
- The irq plugin will monitor the rate of issues per second for each selected interrupt.
- If no interrupt is selected then all interrupts are monitored.
-]]
-
-lucistatistics_collectdirq_enable = "Enable this plugin"
-lucistatistics_collectdirq_irqs = "Monitor interrupts"
-lucistatistics_collectdirq_irqs_desc = "multiple separated by space"
-lucistatistics_collectdirq_ignoreselected = "Monitor all except selected ones"
-
--- netlink plugin
-lucistatistics_collectdnetlink = "Netlink Plugin Configuration"
-lucistatistics_collectdnetlink_desc = [[
- The netlink plugin collects extended informations like qdisc-, class- and
- filter-statistics for selected interfaces.
-]]
-
-lucistatistics_collectdnetlink_enable = "Enable this plugin"
-lucistatistics_collectdnetlink_interfaces = "Basic monitoring"
-lucistatistics_collectdnetlink_interfaces_desc = "hold Ctrl while clicking to select multiple interfaces"
-lucistatistics_collectdnetlink_verboseinterfaces = "Verbose monitoring"
-lucistatistics_collectdnetlink_verboseinterfaces_desc = "hold Ctrl while clicking to select multiple interfaces"
-lucistatistics_collectdnetlink_qdiscs = "Qdisc monitoring"
-lucistatistics_collectdnetlink_qdiscs_desc = "hold Ctrl while clicking to select multiple interfaces"
-lucistatistics_collectdnetlink_classes = "Shaping class monitoring"
-lucistatistics_collectdnetlink_classes_desc = "hold Ctrl while clicking to select multiple interfaces"
-lucistatistics_collectdnetlink_filters = "Filter class monitoring"
-lucistatistics_collectdnetlink_filters_desc = "hold Ctrl while clicking to select multiple interfaces"
-
--- network plugin
-lucistatistics_collectdnetwork = "Network Plugin Configuration"
-lucistatistics_collectdnetwork_desc = [[
- The network plugin provides network based communication between different
- collectd instances. Collectd can operate both in client and server mode.
- In client mode locally collected date is transferred to a collectd server
- instance, in server mode the local instance receives data from other hosts.
-]]
-
-lucistatistics_collectdnetwork_enable = "Enable this plugin"
-lucistatistics_collectdnetworklisten = "Listener interfaces"
-lucistatistics_collectdnetworklisten_desc = "This section defines on which interfaces collectd will wait for incoming connections."
-lucistatistics_collectdnetworklisten_host = "Listen host"
-lucistatistics_collectdnetworklisten_host_desc = "host-, ip- or ip6 address"
-lucistatistics_collectdnetworklisten_port = "Listen port"
-lucistatistics_collectdnetworklisten_port_desc = "0 - 65535"
-lucistatistics_collectdnetworkserver = "serverer interfaces"
-lucistatistics_collectdnetworkserver_desc = "This section defines to which servers the locally collected data is sent to."
-lucistatistics_collectdnetworkserver_host = "Server host"
-lucistatistics_collectdnetworkserver_host_desc = "host-, ip- or ip6 address"
-lucistatistics_collectdnetworkserver_port = "Server port"
-lucistatistics_collectdnetworkserver_port_desc = "0 - 65535"
-lucistatistics_collectdnetwork_timetolive = "TTL for network packets"
-lucistatistics_collectdnetwork_timetolive_desc = "0 - 255"
-lucistatistics_collectdnetwork_forward = "Forwarding between listen and server addresses"
-lucistatistics_collectdnetwork_cacheflush = "Cache flush interval"
-lucistatistics_collectdnetwork_cacheflush_desc = "seconds"
-
--- ping plugin
-lucistatistics_collectdping = "Ping Plugin Configuration"
-lucistatistics_collectdping_desc = [[
- The ping plugin will send icmp echo replies to selected hosts and
- measure the roundtrip time for each host.
-]]
-
-lucistatistics_collectdping_enable = "Enable this plugin"
-lucistatistics_collectdping_hosts = "Monitor hosts"
-lucistatistics_collectdping_hosts_desc = "multiple separated by space"
-lucistatistics_collectdping_ttl = "TTL for ping packets"
-lucistatistics_collectdping_ttl_desc = "0 - 255"
-
--- processes plugin
-lucistatistics_collectdprocesses = "Processes Plugin Configuration"
-lucistatistics_collectdprocesses_desc = [[
- The processes plugin collects informations like cpu time, page faults
- and memory usage of selected processes.
-]]
-
-lucistatistics_collectdprocesses_enable = "Enable this plugin"
-lucistatistics_collectdprocesses_processes = "Monitor processes"
-lucistatistics_collectdprocesses_processes_desc = "multiple separated by space"
-
--- rrdtool plugin
-lucistatistics_collectdrrdtool = "RRDTool Plugin Configuration"
-lucistatistics_collectdrrdtool_desc = [[
- The rrdtool plugin stores the collected data in rrd database files, the
- foundation of the diagrams.<br /><br />
- <strong>Warning: Setting the wrong values will result in a very
- high memory consumption in the temporary directory. This can
- render the device unusable!</strong>
-]]
-
-lucistatistics_collectdrrdtool_enable = "Enable this plugin"
-lucistatistics_collectdrrdtool_datadir = "Storage directory"
-lucistatistics_collectdrrdtool_stepsize = "RRD step interval"
-lucistatistics_collectdrrdtool_stepsize_desc = "seconds"
-lucistatistics_collectdrrdtool_heartbeat = "RRD heart beat interval"
-lucistatistics_collectdrrdtool_heartbeat_desc = "seconds"
-lucistatistics_collectdrrdtool_rrasingle = "Only create average RRAs"
-lucistatistics_collectdrrdtool_rrasingle_desc = "reduces rrd size"
-lucistatistics_collectdrrdtool_rratimespans = "Stored timespans"
-lucistatistics_collectdrrdtool_rratimespans_desc = "seconds; multiple separated by space"
-lucistatistics_collectdrrdtool_rrarows = "Rows per RRA"
-lucistatistics_collectdrrdtool_xff = "RRD XFiles Factor"
-lucistatistics_collectdrrdtool_cachetimeout = "Cache collected data for"
-lucistatistics_collectdrrdtool_cachetimeout_desc = "seconds"
-lucistatistics_collectdrrdtool_cacheflush = "Flush cache after"
-lucistatistics_collectdrrdtool_cacheflush_desc = "seconds"
-
--- tcpconns plugin
-lucistatistics_collectdtcpconns = "TCPConns Plugin Configuration"
-lucistatistics_collectdtcpconns_desc = [[
- The tcpconns plugin collects informations about
- open tcp connections on selected ports.
-]]
-
-lucistatistics_collectdtcpconns_enable = "Enable this plugin"
-lucistatistics_collectdtcpconns_listeningports = "Monitor all local listen ports"
-lucistatistics_collectdtcpconns_localports = "Monitor local ports"
-lucistatistics_collectdtcpconns_localports_desc = "0 - 65535; multiple separated by space"
-lucistatistics_collectdtcpconns_remoteports = "Monitor remote ports"
-lucistatistics_collectdtcpconns_remoteports_desc = "0 - 65535; multiple separated by space"
-
--- unixsock plugin
-lucistatistics_collectdunixsock = "Unixsock Plugin Configuration"
-lucistatistics_collectdunixsock_desc = [[
- The unixsock plugin creates a unix socket which can be used to read
- collected data from a running collectd instance.
-]]
-
-lucistatistics_collectdunixsock_enable = "Enable this plugin"
-lucistatistics_collectdunixsock_socketfile = "Filepath of the unix socket"
-lucistatistics_collectdunixsock_socketgroup = "Group ownership of the unix socket"
-lucistatistics_collectdunixsock_socketgroup_desc = "group name"
-lucistatistics_collectdunixsock_socketperms = "File permissions of the unix socket"
-lucistatistics_collectdunixsock_socketperms_desc = "octal"
-
--- wireless plugin
-lucistatistics_collectdwireless = "Wireless Plugin Configuration"
-lucistatistics_collectdwireless_desc = [[
- The wireless plugin collects statistics about wireless signal strength, noise and quality.
-]]
-
-lucistatistics_collectdwireless_enable = "Enable this plugin"
-
--- /dev/null
+--[[
+
+Luci i18n translation file for the statistics application
+(c) 2008 Freifunk Leipzig / Jo-Philipp Wich <xm@leipzig.freifunk.net>
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+$Id$
+
+]]--
+
+
+--
+-- general translations
+--
+
+stat_statistics = "Statistics"
+stat_systemplugins = "System plugins"
+stat_networkplugins = "Network plugins"
+stat_outputplugins = "Output plugins"
+stat_showtimespan = "Display timespan »"
+stat_graphs = "Graphs"
+
+
+--
+-- collectd plugin translations
+--
+
+stat_collectd = "Collectd"
+stat_cpu = "Processor"
+stat_ping = "Ping"
+stat_iptables = "Firewall"
+stat_netlink = "Netlink"
+stat_processes = "Processes"
+stat_wireless = "Wireless"
+stat_tcpconns = "TCP Connections"
+stat_interface = "Interfaces"
+stat_df = "Disk Space Usage"
+stat_irq = "Interrupts"
+stat_disk = "Disk Usage"
+stat_exec = "Exec"
+stat_rrdtool = "RRDTool"
+stat_network = "Network"
+stat_csv = "CSV Output"
+
+
+--
+-- diagram translations
+--
+
+stat_dg_title_wireless__signal_noise = "%H: Wireless - Signal Noise Ratio"
+stat_dg_label_wireless__signal_noise = "dBm"
+stat_ds_signal_noise = "Noise Level"
+stat_ds_signal_power = "Signal Strength"
+
+stat_dg_title_wireless__signal_quality = "%H: Wireless - Signal Quality"
+stat_dg_label_wireless__signal_quality = "n"
+stat_ds_signal_quality = "Signal Quality"
+
+stat_dg_title_ping = "%H: ICMP Roundtrip Times"
+stat_dg_label_ping = "ms"
+stat_ds_ping = "%di"
+
+stat_dg_title_iptables__ipt_packets = "%H: Firewall - Processed Packets"
+stat_dg_label_iptables__ipt_packets = "Packets/s"
+stat_ds_ipt_packets = 'Chain "%di"'
+
+stat_dg_title_netlink__if_octets = "%H: Netlink - Transfer on %pi"
+stat_dg_label_netlink__if_octets = "Bytes/s"
+stat_ds_if_octets = "Bytes (%ds)"
+
+stat_dg_title_netlink__if_packets = "%H: Netlink - Packets on %pi"
+stat_dg_label_netlink__if_packets = "Packets/s"
+stat_ds_if_packets = "Processed (%ds)"
+stat_ds_if_dropped = "Dropped (%ds)"
+stat_ds_if_errors = "Errors (%ds)"
+
+stat_dg_title_netlink__if_multicast = "%H: Netlink - Multicast on %pi"
+stat_dg_label_netlink__if_multicast = "Packets/s"
+stat_ds_if_multicast = "Packets"
+
+stat_dg_title_netlink__if_collisions = "%H: Netlink - Collisions on %pi"
+stat_dg_label_netlink__if_collisions = "Collisions/s"
+stat_ds_if_collisions = "Collisions"
+
+stat_dg_title_netlink__if_tx_errors = "%H: Netlink - Errors on %pi"
+stat_dg_label_netlink__if_tx_errors = "Errors/s"
+stat_ds_if_tx_errors = "%di"
+stat_ds_if_rx_errors = "%di"
+
+stat_dg_title_processes = "%H: Processes"
+stat_dg_label_processes = "Processes/s"
+stat_ds_ps_state = "%di"
+
+stat_dg_title_processes__ps_cputime = "%H: Process %pi - used cpu time"
+stat_dg_label_processes__ps_cputime = "Jiffies"
+stat_ds_ps_cputime__syst = "system"
+stat_ds_ps_cputime__user = "user"
+
+stat_dg_title_processes__ps_count = "%H: Process %pi - threads and processes"
+stat_dg_label_processes__ps_count = "Count"
+stat_ds_ps_count = "%ds"
+
+stat_dg_title_processes__ps_pagefaults = "%H: Process %pi - page faults"
+stat_dg_label_processes__ps_pagefaults = "Pagefaults"
+stat_ds_ps_pagefaults = "page faults"
+
+stat_dg_title_processes__ps_rss = "%H: Process %pi - virtual memory size"
+stat_dg_label_processes__ps_rss = "Bytes"
+stat_ds_ps_rss = "virtual memory"
+
+stat_dg_title_cpu = "%H: Usage on Processor #%pi"
+stat_dg_label_cpu = "%"
+stat_ds_cpu = "%di"
+
+stat_dg_title_interface__if_octets = "%H: Transfer on %di"
+stat_dg_label_interface__if_octets = "Bytes/s"
+
+stat_dg_title_interface__if_packets = "%H: Packets on %di"
+stat_dg_label_interface__if_packets = "Packets/s"
+
+stat_dg_title_tcpconns = "%H: TCP-Connections to Port %pi"
+stat_dg_label_tcpconns = "Connections/s"
+stat_ds_tcp_connections = "%di"
+
+stat_dg_title_df = "%H: Disk Space Usage on %di"
+stat_dg_label_df = "Bytes"
+stat_ds_df__free = "%ds"
+stat_ds_df__used = "%ds"
+
+stat_dg_title_irq = "%H: Interrupts"
+stat_dg_label_irq = "Issues/s"
+stat_ds_irq = "IRQ %di"
+
+
+--
+-- CBI translations
+--
+
+lucistatistics = "Statistics"
+
+-- general config
+lucistatistics_collectd = "Collectd Settings"
+lucistatistics_collectd_desc = [[
+ Collectd is a small daeomon for collecting data from various sources through different plugins.
+ On this page you can change general settings for the collectd daemon.
+]]
+
+lucistatistics_collectd_hostname = "Hostname"
+lucistatistics_collectd_basedir = "Base Directory"
+lucistatistics_collectd_include = "Directory for sub-configurations"
+lucistatistics_collectd_plugindir = "Directory for collectd plugins"
+lucistatistics_collectd_pidfile = "Used PID file"
+lucistatistics_collectd_typesdb = "Datasets definition file"
+lucistatistics_collectd_interval = "Data collection interval"
+lucistatistics_collectd_interval_desc = "Seconds"
+lucistatistics_collectd_readthreads = "Number of threads for data collection"
+lucistatistics_collectd_fqdnlookup = "Try to lookup fully qualified hostname"
+
+-- cpu plugin
+lucistatistics_collectdcpu = "CPU Plugin Configuration"
+lucistatistics_collectdcpu_desc = "The cpu plugin collects basic statistics about the processor usage."
+lucistatistics_collectdcpu_enable = "Enable this plugin"
+
+-- csv plugin
+lucistatistics_collectdcsv = "CSV Plugin Configuration"
+lucistatistics_collectdcsv_desc = "The csv plugin stores collected data in csv file format for further processing by external programs."
+lucistatistics_collectdcsv_enable = "Enable this plugin"
+lucistatistics_collectdcsv_datadir = "Storage directory for the csv files"
+lucistatistics_collectdcsv_storerates = "Store data values as rates instead of absolute values"
+
+-- df plugin
+lucistatistics_collectddf = "DF Plugin Configuration"
+lucistatistics_collectddf_desc = "The df plugin collects statistics about the disk space usage on different devices, mount points or filesystem types."
+lucistatistics_collectddf_enable = "Enable this plugin"
+lucistatistics_collectddf_devices = "Monitor devices"
+lucistatistics_collectddf_devices_desc = "multiple separated by space"
+lucistatistics_collectddf_mountpoints = "Monitor mount points"
+lucistatistics_collectddf_mountpoints_desc = "multiple separated by space"
+lucistatistics_collectddf_fstypes = "Monitor filesystem types"
+lucistatistics_collectddf_fstypes_desc = "multiple separated by space"
+lucistatistics_collectddf_ignoreselected = "Monitor all except selected ones"
+
+-- disk plugin
+lucistatistics_collectddisk = "Disk Plugin Configuration"
+lucistatistics_collectddisk_desc = "The disk plugin collects detailled usage statistics for selected partitions or whole disks."
+lucistatistics_collectddisk_enable = "Enable this plugin"
+lucistatistics_collectddisk_disks = "Monitor disks and partitions"
+lucistatistics_collectddisk_disks_desc = "multiple separated by space"
+lucistatistics_collectddisk_ignoreselected = "Monitor all except selected ones"
+
+-- dns plugin
+lucistatistics_collectddns = "DNS Plugin Configuration"
+lucistatistics_collectddns_desc = "The dns plugin collects detailled statistics about dns related traffic on selected interfaces."
+lucistatistics_collectddns_enable = "Enable this plugin"
+lucistatistics_collectddns_interfaces = "Monitor interfaces"
+lucistatistics_collectddns_interfaces_desc = "multiple separated by space"
+lucistatistics_collectddns_ignoresources = "Ignore source addresses"
+lucistatistics_collectddns_ignoresources_desc = "multiple separated by space"
+
+-- email plugin
+lucistatistics_collectdemail = "E-Mail Plugin Configuration"
+lucistatistics_collectdemail_desc = [[
+ The email plugin creates a unix socket which can be used to transmit
+ email-statistics to a running collectd daemon. This plugin is primarily
+ intended to be used in conjunction with Mail::SpamAssasin::Plugin::Collectd
+ but can be used in other ways as well.
+]]
+
+lucistatistics_collectdemail_enable = "Enable this plugin"
+lucistatistics_collectdemail_socketfile = "Filepath of the unix socket"
+lucistatistics_collectdemail_socketgroup = "Group ownership of the unix socket"
+lucistatistics_collectdemail_socketgroup_desc = "group name"
+lucistatistics_collectdemail_socketperms = "File permissions of the unix socket"
+lucistatistics_collectdemail_socketperms_desc = "octal"
+lucistatistics_collectdemail_maxconns = "Maximum allowed connections"
+
+-- exec plugin
+lucistatistics_collectdexec = "Exec Plugin Configuration"
+lucistatistics_collectdexec_desc = [[
+ The exec plugin starts external commands to read values from or
+ to notify external processes when certain threshold values have
+ been reached.
+]]
+
+lucistatistics_collectdexec_enable = "Enable this plugin"
+lucistatistics_collectdexecinput = "Add command for reading values"
+lucistatistics_collectdexecinput_desc = [[
+ Here you can define external commands which will be started by collectd in order
+ to read certain values. The values will be read from stdout.
+]]
+
+lucistatistics_collectdexecinput_cmdline = "Commandline"
+lucistatistics_collectdexecinput_cmduser = "Run as user"
+lucistatistics_collectdexecinput_cmdgroup = "Run as group"
+lucistatistics_collectdexecnotify = "Add notification command"
+lucistatistics_collectdexecnotify_desc = [[
+ Here you can define external commands which will be started by collectd
+ when certain threshold values have been reached. The values leading to
+ invokation will be feeded to the the called programs stdin.
+]]
+
+lucistatistics_collectdexecnotify_cmdline = "Commandline"
+lucistatistics_collectdexecnotify_cmduser = "Run as user"
+lucistatistics_collectdexecnotify_cmdgroup = "Run as group"
+
+-- interface plugin
+lucistatistics_collectdinterface = "Interface Plugin Configuration"
+lucistatistics_collectdinterface_desc = "The interface plugin collects traffic statistics on selected interfaces."
+lucistatistics_collectdinterface_enable = "Enable this plugin"
+lucistatistics_collectdinterface_interfaces = "Monitor interfaces"
+lucistatistics_collectdinterface_interfaces_desc = "hold Ctrl while clicking to select multiple interfaces"
+lucistatistics_collectdinterface_ignoreselected = "Monitor all except selected ones"
+
+-- iptables plugin
+lucistatistics_collectdiptables = "Iptables Plugin Configuration"
+lucistatistics_collectdiptables_desc = [[
+ The iptables plugin will monitor selected firewall rules and collect
+ informations about processed bytes and packets per rule.
+]]
+
+lucistatistics_collectdiptables_enable = "Enable this plugin"
+
+lucistatistics_collectdiptablesmatch = "Add matching rule"
+lucistatistics_collectdiptablesmatch_desc = [[
+ Here you can define various criteria by which the monitored
+ iptables rules are selected.
+]]
+
+lucistatistics_collectdiptablesmatch_name = "Name of the rule"
+lucistatistics_collectdiptablesmatch_name_desc = "max. 16 chars"
+lucistatistics_collectdiptablesmatch_table = "Table"
+lucistatistics_collectdiptablesmatch_chain = "Chain"
+lucistatistics_collectdiptablesmatch_target = "Action (target)"
+lucistatistics_collectdiptablesmatch_protocol = "Network protocol"
+lucistatistics_collectdiptablesmatch_source = "Source ip range"
+lucistatistics_collectdiptablesmatch_source_desc = "CIDR notation"
+lucistatistics_collectdiptablesmatch_destination = "Destination ip range"
+lucistatistics_collectdiptablesmatch_destination_desc = "CIDR notation"
+lucistatistics_collectdiptablesmatch_inputif = "Incoming interface"
+lucistatistics_collectdiptablesmatch_inputif_desc = "e.g. br-lan"
+lucistatistics_collectdiptablesmatch_outputif = "Outgoing interface"
+lucistatistics_collectdiptablesmatch_outputif_desc = "e.g. br-ff"
+lucistatistics_collectdiptablesmatch_options = "Options"
+lucistatistics_collectdiptablesmatch_options_desc = "e.g. reject-with tcp-reset"
+
+-- irq plugin
+lucistatistics_collectdirq = "IRQ Plugin Configuration"
+lucistatistics_collectdirq_desc = [[
+ The irq plugin will monitor the rate of issues per second for each selected interrupt.
+ If no interrupt is selected then all interrupts are monitored.
+]]
+
+lucistatistics_collectdirq_enable = "Enable this plugin"
+lucistatistics_collectdirq_irqs = "Monitor interrupts"
+lucistatistics_collectdirq_irqs_desc = "multiple separated by space"
+lucistatistics_collectdirq_ignoreselected = "Monitor all except selected ones"
+
+-- netlink plugin
+lucistatistics_collectdnetlink = "Netlink Plugin Configuration"
+lucistatistics_collectdnetlink_desc = [[
+ The netlink plugin collects extended informations like qdisc-, class- and
+ filter-statistics for selected interfaces.
+]]
+
+lucistatistics_collectdnetlink_enable = "Enable this plugin"
+lucistatistics_collectdnetlink_interfaces = "Basic monitoring"
+lucistatistics_collectdnetlink_interfaces_desc = "hold Ctrl while clicking to select multiple interfaces"
+lucistatistics_collectdnetlink_verboseinterfaces = "Verbose monitoring"
+lucistatistics_collectdnetlink_verboseinterfaces_desc = "hold Ctrl while clicking to select multiple interfaces"
+lucistatistics_collectdnetlink_qdiscs = "Qdisc monitoring"
+lucistatistics_collectdnetlink_qdiscs_desc = "hold Ctrl while clicking to select multiple interfaces"
+lucistatistics_collectdnetlink_classes = "Shaping class monitoring"
+lucistatistics_collectdnetlink_classes_desc = "hold Ctrl while clicking to select multiple interfaces"
+lucistatistics_collectdnetlink_filters = "Filter class monitoring"
+lucistatistics_collectdnetlink_filters_desc = "hold Ctrl while clicking to select multiple interfaces"
+
+-- network plugin
+lucistatistics_collectdnetwork = "Network Plugin Configuration"
+lucistatistics_collectdnetwork_desc = [[
+ The network plugin provides network based communication between different
+ collectd instances. Collectd can operate both in client and server mode.
+ In client mode locally collected date is transferred to a collectd server
+ instance, in server mode the local instance receives data from other hosts.
+]]
+
+lucistatistics_collectdnetwork_enable = "Enable this plugin"
+lucistatistics_collectdnetworklisten = "Listener interfaces"
+lucistatistics_collectdnetworklisten_desc = "This section defines on which interfaces collectd will wait for incoming connections."
+lucistatistics_collectdnetworklisten_host = "Listen host"
+lucistatistics_collectdnetworklisten_host_desc = "host-, ip- or ip6 address"
+lucistatistics_collectdnetworklisten_port = "Listen port"
+lucistatistics_collectdnetworklisten_port_desc = "0 - 65535"
+lucistatistics_collectdnetworkserver = "serverer interfaces"
+lucistatistics_collectdnetworkserver_desc = "This section defines to which servers the locally collected data is sent to."
+lucistatistics_collectdnetworkserver_host = "Server host"
+lucistatistics_collectdnetworkserver_host_desc = "host-, ip- or ip6 address"
+lucistatistics_collectdnetworkserver_port = "Server port"
+lucistatistics_collectdnetworkserver_port_desc = "0 - 65535"
+lucistatistics_collectdnetwork_timetolive = "TTL for network packets"
+lucistatistics_collectdnetwork_timetolive_desc = "0 - 255"
+lucistatistics_collectdnetwork_forward = "Forwarding between listen and server addresses"
+lucistatistics_collectdnetwork_cacheflush = "Cache flush interval"
+lucistatistics_collectdnetwork_cacheflush_desc = "seconds"
+
+-- ping plugin
+lucistatistics_collectdping = "Ping Plugin Configuration"
+lucistatistics_collectdping_desc = [[
+ The ping plugin will send icmp echo replies to selected hosts and
+ measure the roundtrip time for each host.
+]]
+
+lucistatistics_collectdping_enable = "Enable this plugin"
+lucistatistics_collectdping_hosts = "Monitor hosts"
+lucistatistics_collectdping_hosts_desc = "multiple separated by space"
+lucistatistics_collectdping_ttl = "TTL for ping packets"
+lucistatistics_collectdping_ttl_desc = "0 - 255"
+
+-- processes plugin
+lucistatistics_collectdprocesses = "Processes Plugin Configuration"
+lucistatistics_collectdprocesses_desc = [[
+ The processes plugin collects informations like cpu time, page faults
+ and memory usage of selected processes.
+]]
+
+lucistatistics_collectdprocesses_enable = "Enable this plugin"
+lucistatistics_collectdprocesses_processes = "Monitor processes"
+lucistatistics_collectdprocesses_processes_desc = "multiple separated by space"
+
+-- rrdtool plugin
+lucistatistics_collectdrrdtool = "RRDTool Plugin Configuration"
+lucistatistics_collectdrrdtool_desc = [[
+ The rrdtool plugin stores the collected data in rrd database files, the
+ foundation of the diagrams.<br /><br />
+ <strong>Warning: Setting the wrong values will result in a very
+ high memory consumption in the temporary directory. This can
+ render the device unusable!</strong>
+]]
+
+lucistatistics_collectdrrdtool_enable = "Enable this plugin"
+lucistatistics_collectdrrdtool_datadir = "Storage directory"
+lucistatistics_collectdrrdtool_stepsize = "RRD step interval"
+lucistatistics_collectdrrdtool_stepsize_desc = "seconds"
+lucistatistics_collectdrrdtool_heartbeat = "RRD heart beat interval"
+lucistatistics_collectdrrdtool_heartbeat_desc = "seconds"
+lucistatistics_collectdrrdtool_rrasingle = "Only create average RRAs"
+lucistatistics_collectdrrdtool_rrasingle_desc = "reduces rrd size"
+lucistatistics_collectdrrdtool_rratimespans = "Stored timespans"
+lucistatistics_collectdrrdtool_rratimespans_desc = "seconds; multiple separated by space"
+lucistatistics_collectdrrdtool_rrarows = "Rows per RRA"
+lucistatistics_collectdrrdtool_xff = "RRD XFiles Factor"
+lucistatistics_collectdrrdtool_cachetimeout = "Cache collected data for"
+lucistatistics_collectdrrdtool_cachetimeout_desc = "seconds"
+lucistatistics_collectdrrdtool_cacheflush = "Flush cache after"
+lucistatistics_collectdrrdtool_cacheflush_desc = "seconds"
+
+-- tcpconns plugin
+lucistatistics_collectdtcpconns = "TCPConns Plugin Configuration"
+lucistatistics_collectdtcpconns_desc = [[
+ The tcpconns plugin collects informations about
+ open tcp connections on selected ports.
+]]
+
+lucistatistics_collectdtcpconns_enable = "Enable this plugin"
+lucistatistics_collectdtcpconns_listeningports = "Monitor all local listen ports"
+lucistatistics_collectdtcpconns_localports = "Monitor local ports"
+lucistatistics_collectdtcpconns_localports_desc = "0 - 65535; multiple separated by space"
+lucistatistics_collectdtcpconns_remoteports = "Monitor remote ports"
+lucistatistics_collectdtcpconns_remoteports_desc = "0 - 65535; multiple separated by space"
+
+-- unixsock plugin
+lucistatistics_collectdunixsock = "Unixsock Plugin Configuration"
+lucistatistics_collectdunixsock_desc = [[
+ The unixsock plugin creates a unix socket which can be used to read
+ collected data from a running collectd instance.
+]]
+
+lucistatistics_collectdunixsock_enable = "Enable this plugin"
+lucistatistics_collectdunixsock_socketfile = "Filepath of the unix socket"
+lucistatistics_collectdunixsock_socketgroup = "Group ownership of the unix socket"
+lucistatistics_collectdunixsock_socketgroup_desc = "group name"
+lucistatistics_collectdunixsock_socketperms = "File permissions of the unix socket"
+lucistatistics_collectdunixsock_socketperms_desc = "octal"
+
+-- wireless plugin
+lucistatistics_collectdwireless = "Wireless Plugin Configuration"
+lucistatistics_collectdwireless_desc = [[
+ The wireless plugin collects statistics about wireless signal strength, noise and quality.
+]]
+
+lucistatistics_collectdwireless_enable = "Enable this plugin"
+
projects / project / luci.git / commitdiff