X-Git-Url: https://git.archive.openwrt.org/?p=project%2Fluci.git;a=blobdiff_plain;f=modules%2Fluci-base%2Fpo%2Fen%2Fbase.po;h=5340e83eb4a576c68b93ea185ca7f04d9467ddba;hp=c75b4cab3f76c168c91f0f75bd2459f9446ccc62;hb=HEAD;hpb=6a13d73c298413a32236e3a06108f6236254c248 diff --git a/modules/luci-base/po/en/base.po b/modules/luci-base/po/en/base.po index c75b4cab3..5340e83eb 100644 --- a/modules/luci-base/po/en/base.po +++ b/modules/luci-base/po/en/base.po @@ -13,6 +13,12 @@ msgstr "" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: Pootle 2.0.4\n" +msgid "%.1f dB" +msgstr "" + +msgid "%s is untagged in multiple VLANs!" +msgstr "" + msgid "(%d minute window, %d second interval)" msgstr "(%d minute window, %d second interval)" @@ -40,15 +46,45 @@ msgstr "" msgid "-- match by label --" msgstr "" +msgid "-- match by uuid --" +msgstr "" + msgid "1 Minute Load:" msgstr "1 Minute Load:" msgid "15 Minute Load:" msgstr "15 Minute Load:" +msgid "4-character hexadecimal ID" +msgstr "" + +msgid "464XLAT (CLAT)" +msgstr "" + msgid "5 Minute Load:" msgstr "5 Minute Load:" +msgid "6-octet identifier as a hex string - no colons" +msgstr "" + +msgid "802.11r Fast Transition" +msgstr "" + +msgid "802.11w Association SA Query maximum timeout" +msgstr "" + +msgid "802.11w Association SA Query retry timeout" +msgstr "" + +msgid "802.11w Management Frame Protection" +msgstr "" + +msgid "802.11w maximum timeout" +msgstr "" + +msgid "802.11w retry timeout" +msgstr "" + msgid "BSSID" msgstr "BSSID" @@ -99,6 +135,9 @@ msgstr "LED Name" msgid "MAC-Address" msgstr "MAC-Address" +msgid "DUID" +msgstr "" + msgid "" "Max. DHCP leases" @@ -119,24 +158,35 @@ msgstr "Max. concurrent queries" msgid "%s - %s" msgstr "" -msgid "ADSL" +msgid "" +"
Note: you need to manually restart the cron service if the crontab file " +"was empty before editing." msgstr "" -msgid "ADSL Status" +msgid "A43C + J43 + A43" +msgstr "" + +msgid "A43C + J43 + A43 + V43" +msgstr "" + +msgid "ADSL" msgstr "" msgid "AICCU (SIXXS)" msgstr "" +msgid "ANSI T1.413" +msgstr "" + msgid "APN" msgstr "APN" -msgid "AR Support" -msgstr "AR Support" - msgid "ARP retry threshold" msgstr "ARP retry threshold" +msgid "ATM (Asynchronous Transfer Mode)" +msgstr "" + msgid "ATM Bridges" msgstr "ATM Bridges" @@ -158,6 +208,9 @@ msgstr "" msgid "ATM device number" msgstr "ATM device number" +msgid "ATU-C System Vendor ID" +msgstr "" + msgid "AYIYA" msgstr "" @@ -167,9 +220,6 @@ msgstr "Access Concentrator" msgid "Access Point" msgstr "Access Point" -msgid "Action" -msgstr "Action" - msgid "Actions" msgstr "Actions" @@ -206,6 +256,9 @@ msgstr "Add new interface..." msgid "Additional Hosts files" msgstr "Additional Hosts files" +msgid "Additional servers file" +msgstr "" + msgid "Address" msgstr "Address" @@ -218,15 +271,29 @@ msgstr "Administration" msgid "Advanced Settings" msgstr "Advanced Settings" +msgid "Aggregate Transmit Power(ACTATP)" +msgstr "" + msgid "Alert" msgstr "Alert" +msgid "" +"Allocate IP addresses sequentially, starting from the lowest available " +"address" +msgstr "" + +msgid "Allocate IP sequentially" +msgstr "" + msgid "Allow SSH password authentication" msgstr "Allow SSH password authentication" msgid "Allow all except listed" msgstr "Allow all except listed" +msgid "Allow legacy 802.11b rates" +msgstr "" + msgid "Allow listed only" msgstr "Allow listed only" @@ -247,6 +314,9 @@ msgid "" msgstr "" "Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services" +msgid "Allowed IPs" +msgstr "" + msgid "" "Also see Tunneling Comparison on SIXXS" @@ -255,8 +325,50 @@ msgstr "" msgid "Always announce default router" msgstr "" -msgid "An additional network will be created if you leave this unchecked." -msgstr "An additional network will be created if you leave this unchecked." +msgid "Annex" +msgstr "" + +msgid "Annex A + L + M (all)" +msgstr "" + +msgid "Annex A G.992.1" +msgstr "" + +msgid "Annex A G.992.2" +msgstr "" + +msgid "Annex A G.992.3" +msgstr "" + +msgid "Annex A G.992.5" +msgstr "" + +msgid "Annex B (all)" +msgstr "" + +msgid "Annex B G.992.1" +msgstr "" + +msgid "Annex B G.992.3" +msgstr "" + +msgid "Annex B G.992.5" +msgstr "" + +msgid "Annex J (all)" +msgstr "" + +msgid "Annex L G.992.3 POTS 1" +msgstr "" + +msgid "Annex M (all)" +msgstr "" + +msgid "Annex M G.992.3" +msgstr "" + +msgid "Annex M G.992.5" +msgstr "" msgid "Announce as default router even if no public prefix is available." msgstr "" @@ -267,6 +379,15 @@ msgstr "" msgid "Announced DNS servers" msgstr "" +msgid "Anonymous Identity" +msgstr "" + +msgid "Anonymous Mount" +msgstr "" + +msgid "Anonymous Swap" +msgstr "" + msgid "Antenna 1" msgstr "Antenna 1" @@ -279,11 +400,11 @@ msgstr "" msgid "Any zone" msgstr "Any zone" -msgid "Apply" -msgstr "Apply" +msgid "Apply request failed with status %h" +msgstr "" -msgid "Applying changes" -msgstr "Applying changes" +msgid "Apply unchecked" +msgstr "" msgid "" "Assign a part of given length of every public IPv6-prefix to this interface" @@ -299,15 +420,15 @@ msgstr "" msgid "Associated Stations" msgstr "Associated Stations" -msgid "Atheros 802.11%s Wireless Controller" -msgstr "" - -msgid "AuthGroup" +msgid "Auth Group" msgstr "" msgid "Authentication" msgstr "Authentication" +msgid "Authentication Type" +msgstr "" + msgid "Authoritative" msgstr "Authoritative" @@ -323,6 +444,21 @@ msgstr "" msgid "Automatic Homenet (HNCP)" msgstr "" +msgid "Automatically check filesystem for errors before mounting" +msgstr "" + +msgid "Automatically mount filesystems on hotplug" +msgstr "" + +msgid "Automatically mount swap on hotplug" +msgstr "" + +msgid "Automount Filesystem" +msgstr "" + +msgid "Automount Swap" +msgstr "" + msgid "Available" msgstr "Available" @@ -332,6 +468,15 @@ msgstr "Available packages" msgid "Average:" msgstr "Average:" +msgid "B43 + B43C" +msgstr "" + +msgid "B43 + B43C + V43" +msgstr "" + +msgid "BR / DMR / AFTR" +msgstr "" + msgid "BSSID" msgstr "BSSID" @@ -350,9 +495,6 @@ msgstr "Back to overview" msgid "Back to scan results" msgstr "Back to scan results" -msgid "Background Scan" -msgstr "Background Scan" - msgid "Backup / Flash Firmware" msgstr "Backup / Flash Firmware" @@ -380,6 +522,15 @@ msgstr "" "configuration files marked by opkg, essential base files and the user " "defined backup patterns." +msgid "Bind interface" +msgstr "" + +msgid "Bind only to specific interfaces rather than wildcard address." +msgstr "" + +msgid "Bind the tunnel to this interface (optional)." +msgstr "" + msgid "Bitrate" msgstr "Bitrate" @@ -407,15 +558,14 @@ msgstr "" msgid "Buffered" msgstr "Buffered" -msgid "Buttons" -msgstr "Buttons" +msgid "" +"Build/distribution specific feed definitions. This file will NOT be " +"preserved in any sysupgrade." +msgstr "" msgid "CA certificate; if empty it will be saved after the first connection." msgstr "" -msgid "CPU" -msgstr "CPU" - msgid "CPU usage (%)" msgstr "CPU usage (%)" @@ -434,15 +584,29 @@ msgstr "Changes" msgid "Changes applied." msgstr "Changes applied." +msgid "Changes have been reverted." +msgstr "" + msgid "Changes the administrator password for accessing the device" msgstr "Changes the administrator password for accessing the device" msgid "Channel" msgstr "Channel" +msgid "" +"Channel %d is not available in the %s regulatory domain and has been auto-" +"adjusted to %d." +msgstr "" + msgid "Check" msgstr "Check" +msgid "Check filesystems before mount" +msgstr "" + +msgid "Check this option to delete the existing networks from this radio." +msgstr "" + msgid "Checksum" msgstr "Checksum" @@ -465,6 +629,9 @@ msgstr "" msgid "Cipher" msgstr "Cipher" +msgid "Cisco UDP encapsulation" +msgstr "" + msgid "" "Click \"Generate archive\" to download a tar archive of the current " "configuration files. To reset the firmware to its initial state, click " @@ -499,18 +666,25 @@ msgstr "Command" msgid "Common Configuration" msgstr "Common Configuration" -msgid "Compression" -msgstr "Compression" +msgid "" +"Complicates key reinstallation attacks on the client side by disabling " +"retransmission of EAPOL-Key frames that are used to install keys. This " +"workaround might cause interoperability issues and reduced robustness of key " +"negotiation especially in environments with heavy traffic load." +msgstr "" msgid "Configuration" msgstr "Configuration" -msgid "Configuration applied." -msgstr "Configuration applied." - msgid "Configuration files will be kept." msgstr "Configuration files will be kept." +msgid "Configuration has been applied." +msgstr "" + +msgid "Configuration has been rolled back!" +msgstr "" + msgid "Confirmation" msgstr "Confirmation" @@ -529,6 +703,12 @@ msgstr "" msgid "Connections" msgstr "Connections" +msgid "" +"Could not regain access to the device after applying the configuration " +"changes. You might need to reconnect if you modified network related " +"settings such as the IP address or wireless security credentials." +msgstr "" + msgid "Country" msgstr "Country" @@ -563,6 +743,19 @@ msgid "Custom delegated IPv6-prefix" msgstr "" msgid "" +"Custom feed definitions, e.g. private feeds. This file can be preserved in a " +"sysupgrade." +msgstr "" + +msgid "Custom feeds" +msgstr "" + +msgid "" +"Custom files (certificates, scripts) may remain on the system. To prevent " +"this, perform a factory-reset first." +msgstr "" + +msgid "" "Customizes the behaviour of the device LEDs if possible." msgstr "" @@ -605,12 +798,33 @@ msgstr "DNS forwardings" msgid "DNS-Label / FQDN" msgstr "" +msgid "DNSSEC" +msgstr "" + +msgid "DNSSEC check unsigned" +msgstr "" + +msgid "DPD Idle Timeout" +msgstr "" + msgid "DS-Lite AFTR address" msgstr "" +msgid "DSL" +msgstr "" + +msgid "DSL Status" +msgstr "" + +msgid "DSL line mode" +msgstr "" + msgid "DUID" msgstr "" +msgid "Data Rate" +msgstr "" + msgid "Debug" msgstr "Debug" @@ -620,6 +834,9 @@ msgstr "Default %d" msgid "Default gateway" msgstr "Default gateway" +msgid "Default is stateless + stateful" +msgstr "" + msgid "Default route" msgstr "" @@ -641,9 +858,6 @@ msgstr "" msgid "Delete" msgstr "Delete" -msgid "Delete this interface" -msgstr "Delete this interface" - msgid "Delete this network" msgstr "Delete this network" @@ -662,6 +876,15 @@ msgstr "Device" msgid "Device Configuration" msgstr "Device Configuration" +msgid "Device is rebooting..." +msgstr "" + +msgid "Device unreachable" +msgstr "" + +msgid "Device unreachable!" +msgstr "" + msgid "Diagnostics" msgstr "Diagnostics" @@ -682,15 +905,21 @@ msgstr "" msgid "Disable DNS setup" msgstr "" -msgid "Disable HW-Beacon timer" -msgstr "Disable HW-Beacon timer" +msgid "Disable Encryption" +msgstr "" msgid "Disabled" msgstr "Disabled" +msgid "Disabled (default)" +msgstr "" + msgid "Discard upstream RFC1918 responses" msgstr "" +msgid "Dismiss" +msgstr "" + msgid "Displaying only packages containing" msgstr "" @@ -700,6 +929,9 @@ msgstr "Distance Optimization" msgid "Distance to farthest network member in meters." msgstr "Distance to farthest network member in meters." +msgid "Distribution feeds" +msgstr "" + msgid "Diversity" msgstr "Diversity" @@ -723,15 +955,15 @@ msgstr "" msgid "Do not forward reverse lookups for local networks" msgstr "" -msgid "Do not send probe responses" -msgstr "Do not send probe responses" - msgid "Domain required" msgstr "Domain required" msgid "Domain whitelist" msgstr "" +msgid "Don't Fragment" +msgstr "" + msgid "" "Don't forward DNS-Requests without " "DNS-Name" @@ -745,6 +977,9 @@ msgstr "Download and install package" msgid "Download backup" msgstr "" +msgid "Downstream SNR offset" +msgstr "" + msgid "Dropbear Instance" msgstr "" @@ -770,12 +1005,20 @@ msgid "" "having static leases will be served." msgstr "" +msgid "EA-bits length" +msgstr "" + msgid "EAP-Method" msgstr "EAP-Method" msgid "Edit" msgstr "Edit" +msgid "" +"Edit the raw configuration data above to fix any error and hit \"Save\" to " +"reload the page." +msgstr "" + msgid "Edit this interface" msgstr "" @@ -788,12 +1031,20 @@ msgstr "" msgid "Enable" msgstr "" +msgid "" +"Enable IGMP " +"snooping" +msgstr "" + msgid "Enable STP" msgstr "Enable STP" msgid "Enable HE.net dynamic endpoint update" msgstr "" +msgid "Enable IPv6 negotiation" +msgstr "" + msgid "Enable IPv6 negotiation on the PPP link" msgstr "" @@ -803,6 +1054,9 @@ msgstr "" msgid "Enable NTP client" msgstr "" +msgid "Enable Single DES" +msgstr "" + msgid "Enable TFTP server" msgstr "" @@ -812,6 +1066,9 @@ msgstr "" msgid "Enable WPS pushbutton, requires WPA(2)-PSK" msgstr "" +msgid "Enable key reinstallation (KRACK) countermeasures" +msgstr "" + msgid "Enable learning and aging" msgstr "" @@ -821,6 +1078,9 @@ msgstr "" msgid "Enable mirroring of outgoing packets" msgstr "" +msgid "Enable the DF (Don't Fragment) flag of the encapsulating packets." +msgstr "" + msgid "Enable this mount" msgstr "" @@ -833,6 +1093,14 @@ msgstr "Enable/Disable" msgid "Enabled" msgstr "Enabled" +msgid "Enables IGMP snooping on this bridge" +msgstr "" + +msgid "" +"Enables fast roaming among access points that belong to the same Mobility " +"Domain" +msgstr "" + msgid "Enables the Spanning Tree Protocol on this bridge" msgstr "Enables the Spanning Tree Protocol on this bridge" @@ -842,18 +1110,30 @@ msgstr "" msgid "Encryption" msgstr "Encryption" +msgid "Endpoint Host" +msgstr "" + +msgid "Endpoint Port" +msgstr "" + msgid "Erasing..." msgstr "" msgid "Error" msgstr "Error" +msgid "Errored seconds (ES)" +msgstr "" + msgid "Ethernet Adapter" msgstr "Ethernet Adapter" msgid "Ethernet Switch" msgstr "Ethernet Switch" +msgid "Exclude interfaces" +msgstr "" + msgid "Expand hosts" msgstr "" @@ -867,14 +1147,35 @@ msgstr "" msgid "External" msgstr "" +msgid "External R0 Key Holder List" +msgstr "" + +msgid "External R1 Key Holder List" +msgstr "" + msgid "External system log server" msgstr "" msgid "External system log server port" msgstr "" -msgid "Fast Frames" -msgstr "Fast Frames" +msgid "External system log server protocol" +msgstr "" + +msgid "Extra SSH command options" +msgstr "" + +msgid "FT over DS" +msgstr "" + +msgid "FT over the Air" +msgstr "" + +msgid "FT protocol" +msgstr "" + +msgid "Failed to confirm apply within %ds, waiting for rollback…" +msgstr "" msgid "File" msgstr "" @@ -894,6 +1195,11 @@ msgstr "Filter private" msgid "Filter useless" msgstr "Filter useless" +msgid "" +"Find all currently attached filesystems and swap and replace configuration " +"with defaults based on what was detected" +msgstr "" + msgid "Find and join network" msgstr "" @@ -906,21 +1212,24 @@ msgstr "" msgid "Firewall" msgstr "Firewall" +msgid "Firewall Mark" +msgstr "" + msgid "Firewall Settings" msgstr "Firewall Settings" msgid "Firewall Status" msgstr "Firewall Status" +msgid "Firmware File" +msgstr "" + msgid "Firmware Version" msgstr "" msgid "Fixed source port for outbound DNS queries" msgstr "" -msgid "Flags" -msgstr "Flags" - msgid "Flash Firmware" msgstr "Flash Firmware" @@ -951,12 +1260,27 @@ msgstr "" msgid "Force TKIP and CCMP (AES)" msgstr "" +msgid "Force link" +msgstr "" + +msgid "Force use of NAT-T" +msgstr "" + +msgid "Form token mismatch" +msgstr "" + msgid "Forward DHCP traffic" msgstr "" +msgid "Forward Error Correction Seconds (FECS)" +msgstr "" + msgid "Forward broadcast traffic" msgstr "" +msgid "Forward mesh peer traffic" +msgstr "" + msgid "Forwarding mode" msgstr "" @@ -972,6 +1296,11 @@ msgstr "" msgid "Free space" msgstr "" +msgid "" +"Further information about WireGuard interfaces and peers at wireguard.io." +msgstr "" + msgid "GHz" msgstr "" @@ -990,6 +1319,15 @@ msgstr "" msgid "General Setup" msgstr "General Setup" +msgid "General options for opkg" +msgstr "" + +msgid "Generate Config" +msgstr "" + +msgid "Generate PMK locally" +msgstr "" + msgid "Generate archive" msgstr "" @@ -999,6 +1337,9 @@ msgstr "" msgid "Given password confirmation did not match, password not changed!" msgstr "" +msgid "Global Settings" +msgstr "" + msgid "Global network options" msgstr "" @@ -1008,6 +1349,9 @@ msgstr "" msgid "Go to relevant configuration page" msgstr "Go to relevant configuration page" +msgid "Group Password" +msgstr "" + msgid "Guest" msgstr "" @@ -1017,12 +1361,15 @@ msgstr "" msgid "HE.net username" msgstr "" -msgid "Handler" -msgstr "Handler" +msgid "HT mode (802.11n)" +msgstr "" msgid "Hang Up" msgstr "Hang Up" +msgid "Header Error Code Errors (HEC)" +msgstr "" + msgid "Heartbeat" msgstr "" @@ -1044,6 +1391,9 @@ msgstr "" msgid "Hide ESSID" msgstr "Hide ESSID" +msgid "Host" +msgstr "" + msgid "Host entries" msgstr "Host entries" @@ -1065,6 +1415,12 @@ msgstr "Hostnames" msgid "Hybrid" msgstr "" +msgid "IKE DH Group" +msgstr "" + +msgid "IP Addresses" +msgstr "" + msgid "IP address" msgstr "IP address" @@ -1098,12 +1454,18 @@ msgstr "" msgid "IPv4 only" msgstr "" +msgid "IPv4 prefix" +msgstr "" + msgid "IPv4 prefix length" msgstr "" msgid "IPv4-Address" msgstr "" +msgid "IPv4-in-IPv4 (RFC2003)" +msgstr "" + msgid "IPv6" msgstr "IPv6" @@ -1149,9 +1511,15 @@ msgstr "" msgid "IPv6 routed prefix" msgstr "" +msgid "IPv6 suffix" +msgstr "" + msgid "IPv6-Address" msgstr "" +msgid "IPv6-PD" +msgstr "" + msgid "IPv6-in-IPv4 (RFC4213)" msgstr "" @@ -1164,6 +1532,12 @@ msgstr "" msgid "Identity" msgstr "Identity" +msgid "If checked, 1DES is enabled" +msgstr "" + +msgid "If checked, encryption is disabled" +msgstr "" + msgid "" "If specified, mount the device by its UUID instead of a fixed device node" msgstr "" @@ -1192,8 +1566,8 @@ msgstr "" "slow process as the swap-device cannot be accessed with the high datarates " "of the RAM." -msgid "Ignore Hosts files" -msgstr "" +msgid "Ignore /etc/hosts" +msgstr "Ignore /etc/hosts" msgid "Ignore interface" msgstr "Ignore interface" @@ -1207,6 +1581,11 @@ msgstr "" msgid "In" msgstr "In" +msgid "" +"In order to prevent unauthorized access to the system, your request has been " +"blocked. Click \"Continue »\" below to return to the previous page." +msgstr "" + msgid "Inactivity timeout" msgstr "" @@ -1240,6 +1619,9 @@ msgstr "" msgid "Interface" msgstr "Interface" +msgid "Interface %q device auto-migrated from %q to %q." +msgstr "" + msgid "Interface Configuration" msgstr "" @@ -1252,6 +1634,9 @@ msgstr "" msgid "Interface is shutting down..." msgstr "" +msgid "Interface name" +msgstr "" + msgid "Interface not present or not connected yet." msgstr "" @@ -1282,6 +1667,9 @@ msgstr "" msgid "Invalid username and/or password! Please try again." msgstr "Invalid username and/or password! Please try again." +msgid "Isolate Clients" +msgstr "" + #, fuzzy msgid "" "It appears that you are trying to flash an image that does not fit into the " @@ -1290,16 +1678,16 @@ msgstr "" "It appears that you try to flash an image that does not fit into the flash " "memory, please verify the image file!" -msgid "Java Script required!" +msgid "JavaScript required!" msgstr "" msgid "Join Network" msgstr "Join Network" -msgid "Join Network: Settings" +msgid "Join Network: Wireless Scan" msgstr "" -msgid "Join Network: Wireless Scan" +msgid "Joining Network: %q" msgstr "" msgid "Keep settings" @@ -1344,18 +1732,21 @@ msgstr "Language" msgid "Language and Style" msgstr "" +msgid "Latency" +msgstr "" + msgid "Leaf" msgstr "" +msgid "Lease time" +msgstr "" + msgid "Lease validity time" msgstr "" msgid "Leasefile" msgstr "Leasefile" -msgid "Leasetime" -msgstr "Leasetime" - msgid "Leasetime remaining" msgstr "Leasetime remaining" @@ -1371,15 +1762,24 @@ msgstr "" msgid "Limit" msgstr "Limit" -msgid "Line Attenuation" +msgid "Limit DNS service to subnets interfaces on which we are serving DNS." +msgstr "" + +msgid "Limit listening to these interfaces, and loopback." msgstr "" -msgid "Line Speed" +msgid "Line Attenuation (LATN)" +msgstr "" + +msgid "Line Mode" msgstr "" msgid "Line State" msgstr "" +msgid "Line Uptime" +msgstr "" + msgid "Link On" msgstr "Link On" @@ -1388,12 +1788,37 @@ msgid "" "requests to" msgstr "" +msgid "" +"List of R0KHs in the same Mobility Domain.
Format: MAC-address,NAS-" +"Identifier,128-bit key as hex string.
This list is used to map R0KH-ID " +"(NAS Identifier) to a destination MAC address when requesting PMK-R1 key " +"from the R0KH that the STA used during the Initial Mobility Domain " +"Association." +msgstr "" + +msgid "" +"List of R1KHs in the same Mobility Domain.
Format: MAC-address,R1KH-ID " +"as 6 octets with colons,128-bit key as hex string.
This list is used " +"to map R1KH-ID to a destination MAC address when sending PMK-R1 key from the " +"R0KH. This is also the list of authorized R1KHs in the MD that can request " +"PMK-R1 keys." +msgstr "" + +msgid "List of SSH key files for auth" +msgstr "" + msgid "List of domains to allow RFC1918 responses for" msgstr "" msgid "List of hosts that supply bogus NX domain results" msgstr "" +msgid "Listen Interfaces" +msgstr "" + +msgid "Listen Port" +msgstr "" + msgid "Listen only on the given interface or, if unspecified, on all" msgstr "" @@ -1409,12 +1834,18 @@ msgstr "" msgid "Loading" msgstr "" +msgid "Local IP address to assign" +msgstr "" + msgid "Local IPv4 address" msgstr "" msgid "Local IPv6 address" msgstr "" +msgid "Local Service Only" +msgstr "" + msgid "Local Startup" msgstr "" @@ -1443,7 +1874,7 @@ msgstr "" msgid "Localise queries" msgstr "Localise queries" -msgid "Locked to channel %d used by: %s" +msgid "Locked to channel %s used by: %s" msgstr "" msgid "Log output level" @@ -1461,6 +1892,9 @@ msgstr "Login" msgid "Logout" msgstr "Logout" +msgid "Loss of Signal Seconds (LOSS)" +msgstr "" + msgid "Lowest leased address as offset from the network address." msgstr "" @@ -1476,9 +1910,15 @@ msgstr "MAC-Filter" msgid "MAC-List" msgstr "MAC-List" +msgid "MAP / LW4over6" +msgstr "" + msgid "MB/s" msgstr "" +msgid "MD5" +msgstr "" + msgid "MHz" msgstr "" @@ -1490,8 +1930,11 @@ msgid "" "below:" msgstr "" -msgid "Maximum Rate" -msgstr "Maximum Rate" +msgid "Manual" +msgstr "" + +msgid "Max. Attainable Data Rate (ATTNDR)" +msgstr "" msgid "Maximum allowed number of active DHCP leases" msgstr "" @@ -1505,8 +1948,10 @@ msgstr "" msgid "Maximum amount of seconds to wait for the modem to become ready" msgstr "" -msgid "Maximum hold time" -msgstr "Maximum hold time" +msgid "" +"Maximum length of the name is 15 characters including the automatic protocol/" +"bridge prefix (br-, 6in4-, pppoe- etc.)" +msgstr "" msgid "Maximum number of leased addresses." msgstr "" @@ -1520,15 +1965,12 @@ msgstr "Memory" msgid "Memory usage (%)" msgstr "Memory usage (%)" +msgid "Mesh Id" +msgstr "" + msgid "Metric" msgstr "Metric" -msgid "Minimum Rate" -msgstr "Minimum Rate" - -msgid "Minimum hold time" -msgstr "Minimum hold time" - msgid "Mirror monitor port" msgstr "" @@ -1538,6 +1980,9 @@ msgstr "" msgid "Missing protocol extension for proto %q" msgstr "" +msgid "Mobility Domain" +msgstr "" + msgid "Mode" msgstr "Mode" @@ -1575,12 +2020,18 @@ msgstr "" "Mount Points define at which point a memory device will be attached to the " "filesystem" +msgid "Mount filesystems not specifically configured" +msgstr "" + msgid "Mount options" msgstr "" msgid "Mount point" msgstr "" +msgid "Mount swap not specifically configured" +msgstr "" + msgid "Mounted file systems" msgstr "Mounted file systems" @@ -1590,18 +2041,27 @@ msgstr "" msgid "Move up" msgstr "" -msgid "Multicast Rate" -msgstr "Multicast Rate" - msgid "Multicast address" msgstr "" msgid "NAS ID" msgstr "NAS ID" +msgid "NAT-T Mode" +msgstr "" + +msgid "NAT64 Prefix" +msgstr "" + +msgid "NCM" +msgstr "" + msgid "NDP-Proxy" msgstr "" +msgid "NT Domain" +msgstr "" + msgid "NTP server candidates" msgstr "" @@ -1641,6 +2101,9 @@ msgstr "" msgid "No DHCP Server configured for this interface" msgstr "" +msgid "No NAT-T" +msgstr "" + msgid "No chains in this table" msgstr "No chains in this table" @@ -1674,12 +2137,18 @@ msgstr "" msgid "Noise" msgstr "Noise" -msgid "Noise Margin" +msgid "Noise Margin (SNR)" msgstr "" msgid "Noise:" msgstr "" +msgid "Non Pre-emtive CRC errors (CRC_P)" +msgstr "" + +msgid "Non-wildcard" +msgstr "" + msgid "None" msgstr "" @@ -1698,18 +2167,33 @@ msgstr "" msgid "Note: Configuration files will be erased." msgstr "" +msgid "Note: interface name length" +msgstr "" + msgid "Notice" msgstr "" msgid "Nslookup" msgstr "" +msgid "Number of cached DNS entries (max is 10000, 0 is no caching)" +msgstr "" + msgid "OK" msgstr "OK" msgid "OPKG-Configuration" msgstr "OPKG-Configuration" +msgid "Obfuscated Group Password" +msgstr "" + +msgid "Obfuscated Password" +msgstr "" + +msgid "Obtain IPv6-Address" +msgstr "" + msgid "Off-State Delay" msgstr "" @@ -1737,6 +2221,9 @@ msgstr "" msgid "One or more fields contain invalid values!" msgstr "" +msgid "One or more invalid/required values on tab" +msgstr "" + msgid "One or more required fields have no value!" msgstr "" @@ -1755,12 +2242,54 @@ msgstr "" msgid "Option removed" msgstr "" +msgid "Optional" +msgstr "" + msgid "Optional, specify to override default server (tic.sixxs.net)" msgstr "" msgid "Optional, use when the SIXXS account has more than one tunnel" msgstr "" +msgid "" +"Optional. 32-bit mark for outgoing encrypted packets. Enter value in hex, " +"starting with 0x." +msgstr "" + +msgid "" +"Optional. Allowed values: 'eui64', 'random', fixed value like '::1' or " +"'::1:2'. When IPv6 prefix (like 'a:b:c:d::') is received from a delegating " +"server, use the suffix (like '::1') to form the IPv6 address ('a:b:c:d::1') " +"for the interface." +msgstr "" + +msgid "" +"Optional. Base64-encoded preshared key. Adds in an additional layer of " +"symmetric-key cryptography for post-quantum resistance." +msgstr "" + +msgid "Optional. Create routes for Allowed IPs for this peer." +msgstr "" + +msgid "" +"Optional. Host of peer. Names are resolved prior to bringing up the " +"interface." +msgstr "" + +msgid "Optional. Maximum Transmission Unit of tunnel interface." +msgstr "" + +msgid "Optional. Port of peer." +msgstr "" + +msgid "" +"Optional. Seconds between keep alive messages. Default is 0 (disabled). " +"Recommended value if this device is behind a NAT is 25." +msgstr "" + +msgid "Optional. UDP port used for outgoing and incoming packets." +msgstr "" + msgid "Options" msgstr "Options" @@ -1773,9 +2302,6 @@ msgstr "Out" msgid "Outbound:" msgstr "" -msgid "Outdoor Channels" -msgstr "Outdoor Channels" - msgid "Output Interface" msgstr "" @@ -1785,6 +2311,15 @@ msgstr "" msgid "Override MTU" msgstr "" +msgid "Override TOS" +msgstr "" + +msgid "Override TTL" +msgstr "" + +msgid "Override default interface name" +msgstr "" + msgid "Override the gateway in DHCP responses" msgstr "" @@ -1814,6 +2349,9 @@ msgstr "PID" msgid "PIN" msgstr "" +msgid "PMK R1 Push" +msgstr "" + msgid "PPP" msgstr "" @@ -1826,9 +2364,21 @@ msgstr "" msgid "PPPoE" msgstr "" +msgid "PPPoSSH" +msgstr "" + msgid "PPtP" msgstr "" +msgid "PSID offset" +msgstr "" + +msgid "PSID-bits length" +msgstr "" + +msgid "PTM/EFM (Packet Transfer Mode)" +msgstr "" + msgid "Package libiwinfo required!" msgstr "" @@ -1853,11 +2403,14 @@ msgstr "Password authentication" msgid "Password of Private Key" msgstr "Password of Private Key" +msgid "Password of inner Private Key" +msgstr "" + msgid "Password successfully changed!" msgstr "" -msgid "Path" -msgstr "Path" +msgid "Password2" +msgstr "" msgid "Path to CA-Certificate" msgstr "Path to CA-Certificate" @@ -1868,18 +2421,36 @@ msgstr "" msgid "Path to Private Key" msgstr "Path to Private Key" -msgid "Path to executable which handles the button event" +msgid "Path to inner CA-Certificate" +msgstr "" + +msgid "Path to inner Client-Certificate" +msgstr "" + +msgid "Path to inner Private Key" msgstr "" msgid "Peak:" msgstr "" +msgid "Peer IP address to assign" +msgstr "" + +msgid "Peers" +msgstr "" + +msgid "Perfect Forward Secrecy" +msgstr "" + msgid "Perform reboot" msgstr "Perform reboot" msgid "Perform reset" msgstr "" +msgid "Persistent Keep Alive" +msgstr "" + msgid "Phy Rate:" msgstr "" @@ -1895,22 +2466,31 @@ msgstr "Pkts." msgid "Please enter your username and password." msgstr "Please enter your username and password." -msgid "Please wait: Device rebooting..." -msgstr "Please wait: Device rebooting..." - msgid "Policy" msgstr "Policy" msgid "Port" msgstr "Port" -msgid "Port %d" +msgid "Port status:" msgstr "" -msgid "Port %d is untagged in multiple VLANs!" +msgid "Power Management Mode" msgstr "" -msgid "Port status:" +msgid "Pre-emtive CRC errors (CRCP_P)" +msgstr "" + +msgid "Prefer LTE" +msgstr "" + +msgid "Prefer UMTS" +msgstr "" + +msgid "Prefix Delegated" +msgstr "" + +msgid "Preshared Key" msgstr "" msgid "" @@ -1918,18 +2498,27 @@ msgid "" "ignore failures" msgstr "" +msgid "Prevent listening on these interfaces." +msgstr "" + msgid "Prevents client-to-client communication" msgstr "Prevents client-to-client communication" msgid "Prism2/2.5/3 802.11b Wireless Controller" msgstr "" +msgid "Private Key" +msgstr "" + msgid "Proceed" msgstr "Proceed" msgid "Processes" msgstr "Processes" +msgid "Profile" +msgstr "" + msgid "Prot." msgstr "Prot." @@ -1954,12 +2543,27 @@ msgstr "" msgid "Pseudo Ad-Hoc (ahdemo)" msgstr "Pseudo Ad-Hoc (ahdemo)" +msgid "Public Key" +msgstr "" + msgid "Public prefix routed to this device for distribution to clients." msgstr "" +msgid "QMI Cellular" +msgstr "" + msgid "Quality" msgstr "" +msgid "R0 Key Lifetime" +msgstr "" + +msgid "R1 Key Holder" +msgstr "" + +msgid "RFC3947 NAT-T mode" +msgstr "" + msgid "RTS/CTS Threshold" msgstr "RTS/CTS Threshold" @@ -2038,6 +2642,9 @@ msgstr "" msgid "Realtime Wireless" msgstr "" +msgid "Reassociation Deadline" +msgstr "" + msgid "Rebind protection" msgstr "" @@ -2056,6 +2663,9 @@ msgstr "Receive" msgid "Receiver Antenna" msgstr "Receiver Antenna" +msgid "Recommended. IP addresses of the WireGuard interface." +msgstr "" + msgid "Reconnect this interface" msgstr "" @@ -2065,9 +2675,6 @@ msgstr "" msgid "References" msgstr "References" -msgid "Regulatory Domain" -msgstr "Regulatory Domain" - msgid "Relay" msgstr "" @@ -2083,6 +2690,9 @@ msgstr "" msgid "Remote IPv4 address" msgstr "" +msgid "Remote IPv4 address or FQDN" +msgstr "" + msgid "Remove" msgstr "Remove" @@ -2104,9 +2714,34 @@ msgstr "" msgid "Require TLS" msgstr "" +msgid "Required" +msgstr "" + msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3" msgstr "" +msgid "Required. Base64-encoded private key for this interface." +msgstr "" + +msgid "Required. Base64-encoded public key of peer." +msgstr "" + +msgid "" +"Required. IP addresses and prefixes that this peer is allowed to use inside " +"the tunnel. Usually the peer's tunnel IP addresses and the networks the peer " +"routes through the tunnel." +msgstr "" + +msgid "" +"Requires the 'full' version of wpad/hostapd and support from the wifi driver " +"
(as of Feb 2017: ath9k and ath10k, in LEDE also mwlwifi and mt76)" +msgstr "" + +msgid "" +"Requires upstream supports DNSSEC; verify unsigned domain responses really " +"come from unsigned domains" +msgstr "" + msgid "Reset" msgstr "Reset" @@ -2137,6 +2772,15 @@ msgstr "" msgid "Revert" msgstr "Revert" +msgid "Revert changes" +msgstr "" + +msgid "Revert request failed with status %h" +msgstr "" + +msgid "Reverting configuration…" +msgstr "" + msgid "Root" msgstr "" @@ -2146,6 +2790,12 @@ msgstr "" msgid "Root preparation" msgstr "" +msgid "Route Allowed IPs" +msgstr "" + +msgid "Route type" +msgstr "" + msgid "Routed IPv6 prefix for downstream interfaces" msgstr "" @@ -2165,15 +2815,15 @@ msgstr "" "Routes specify over which interface and gateway a certain host or network " "can be reached." -msgid "Rule #" -msgstr "Rule #" - msgid "Run a filesystem check before mounting the device" msgstr "" msgid "Run filesystem check" msgstr "" +msgid "SHA256" +msgstr "" + msgid "" "SIXXS supports TIC only, for static tunnels using IP protocol 41 (RFC4213) " "use 6in4 instead" @@ -2182,9 +2832,21 @@ msgstr "" msgid "SIXXS-handle[/Tunnel-ID]" msgstr "" +msgid "SNR" +msgstr "" + msgid "SSH Access" msgstr "" +msgid "SSH server address" +msgstr "" + +msgid "SSH server port" +msgstr "" + +msgid "SSH username" +msgstr "" + msgid "SSH-Keys" msgstr "" @@ -2197,9 +2859,6 @@ msgstr "Save" msgid "Save & Apply" msgstr "Save & Apply" -msgid "Save & Apply" -msgstr "" - msgid "Scan" msgstr "Scan" @@ -2223,9 +2882,6 @@ msgstr "" msgid "Separate Clients" msgstr "Separate Clients" -msgid "Separate WDS" -msgstr "Separate WDS" - msgid "Server Settings" msgstr "" @@ -2249,12 +2905,23 @@ msgstr "" msgid "Services" msgstr "Services" +msgid "" +"Set interface properties regardless of the link carrier (If set, carrier " +"sense events do not invoke hotplug handlers)." +msgstr "" + msgid "Set up Time Synchronization" msgstr "" msgid "Setup DHCP Server" msgstr "" +msgid "Severely Errored Seconds (SES)" +msgstr "" + +msgid "Short GI" +msgstr "" + msgid "Show current backup file list" msgstr "" @@ -2267,12 +2934,21 @@ msgstr "" msgid "Signal" msgstr "Signal" +msgid "Signal Attenuation (SATN)" +msgstr "" + msgid "Signal:" msgstr "" msgid "Size" msgstr "Size" +msgid "Size (.ipk)" +msgstr "" + +msgid "Size of DNS query cache" +msgstr "" + msgid "Skip" msgstr "Skip" @@ -2288,6 +2964,9 @@ msgstr "Slot time" msgid "Software" msgstr "Software" +msgid "Software VLAN" +msgstr "" + msgid "Some fields are invalid, cannot save values!" msgstr "" @@ -2299,8 +2978,8 @@ msgstr "" msgid "" "Sorry, there is no sysupgrade support present; a new firmware image must be " -"flashed manually. Please refer to the OpenWrt wiki for device specific " -"install instructions." +"flashed manually. Please refer to the wiki for device specific install " +"instructions." msgstr "" msgid "Sort" @@ -2312,9 +2991,6 @@ msgstr "Source" msgid "Source routing" msgstr "" -msgid "Specifies the button state to handle" -msgstr "Specifies the button state to handle" - msgid "Specifies the directory the device is attached to" msgstr "" @@ -2331,6 +3007,19 @@ msgid "" "dead" msgstr "" +msgid "Specify a TOS (Type of Service)." +msgstr "" + +msgid "" +"Specify a TTL (Time to Live) for the encapsulating packet other than the " +"default (64)." +msgstr "" + +msgid "" +"Specify an MTU (Maximum Transmission Unit) other than the default (1280 " +"bytes)." +msgstr "" + msgid "Specify the secret encryption key here." msgstr "" @@ -2340,6 +3029,9 @@ msgstr "Start" msgid "Start priority" msgstr "Start priority" +msgid "Starting configuration apply…" +msgstr "" + msgid "Startup" msgstr "" @@ -2355,9 +3047,6 @@ msgstr "Static Leases" msgid "Static Routes" msgstr "Static Routes" -msgid "Static WDS" -msgstr "" - msgid "Static address" msgstr "" @@ -2379,6 +3068,12 @@ msgstr "Strict order" msgid "Submit" msgstr "Submit" +msgid "Suppress logging" +msgstr "" + +msgid "Suppress logging of the routine operation of these protocols" +msgstr "" + msgid "Swap" msgstr "" @@ -2394,6 +3089,16 @@ msgstr "" msgid "Switch %q (%s)" msgstr "" +msgid "" +"Switch %q has an unknown topology - the VLAN settings might not be accurate." +msgstr "" + +msgid "Switch Port Mask" +msgstr "" + +msgid "Switch VLAN" +msgstr "" + msgid "Switch protocol" msgstr "" @@ -2436,6 +3141,9 @@ msgstr "Table" msgid "Target" msgstr "Target" +msgid "Target network" +msgstr "" + msgid "Terminate" msgstr "Terminate" @@ -2458,6 +3166,10 @@ msgid "" msgstr "" msgid "" +"The IPv4 address or the fully-qualified domain name of the remote tunnel end." +msgstr "" + +msgid "" "The IPv6 prefix assigned to the provider, usually ends with ::" msgstr "" @@ -2466,6 +3178,19 @@ msgid "" "code> and _" msgstr "" +msgid "The configuration file could not be loaded due to the following error:" +msgstr "" + +msgid "" +"The device could not be reached within %d seconds after applying the pending " +"changes, which caused the configuration to be rolled back for safety " +"reasons. If you believe that the configuration changes are correct " +"nonetheless, perform an unchecked configuration apply. Alternatively, you " +"can dismiss this warning and edit changes before attempting to apply again, " +"or revert all pending changes to keep the currently working configuration " +"state." +msgstr "" + msgid "" "The device file of the memory or partition (e.g." " /dev/sda1)" @@ -2488,9 +3213,6 @@ msgid "" "\"Proceed\" below to start the flash procedure." msgstr "" -msgid "The following changes have been committed" -msgstr "" - msgid "The following changes have been reverted" msgstr "The following changes have been reverted" @@ -2513,6 +3235,9 @@ msgstr "" msgid "The length of the IPv6 prefix in bits" msgstr "" +msgid "The local IPv4 address over which the tunnel is created (optional)." +msgstr "" + msgid "" "The network ports on this device can be combined to several VLANs in which computers can " @@ -2525,6 +3250,9 @@ msgstr "" msgid "The selected protocol needs a device assigned" msgstr "" +msgid "The submitted security token is invalid or already expired!" +msgstr "" + msgid "" "The system is erasing the configuration partition now and will reboot itself " "when finished." @@ -2557,7 +3285,7 @@ msgstr "" msgid "There are no active leases." msgstr "" -msgid "There are no pending changes to apply!" +msgid "There are no changes to apply." msgstr "" msgid "There are no pending changes to revert!" @@ -2580,6 +3308,12 @@ msgid "This IPv4 address of the relay" msgstr "" msgid "" +"This file may contain lines like 'server=/domain/1.2.3.4' or " +"'server=1.2.3.4' fordomain-specific or full upstream DNS servers." +msgstr "" + +msgid "" "This is a list of shell glob patterns for matching files and directories to " "include during sysupgrade. Modified files in /etc/config/ and certain other " "configurations are automatically preserved." @@ -2597,7 +3331,7 @@ msgstr "" msgid "" "This is the local endpoint address assigned by the tunnel broker, it usually " -"ends with :2" +"ends with ...:2/64" msgstr "" msgid "" @@ -2628,9 +3362,6 @@ msgstr "" "This list gives an overview over currently running system processes and " "their status." -msgid "This page allows the configuration of custom button actions" -msgstr "" - msgid "This page gives an overview over currently active network connections." msgstr "This page gives an overview over currently active network connections." @@ -2651,6 +3382,9 @@ msgid "" "archive here." msgstr "" +msgid "Tone" +msgstr "" + msgid "Total Available" msgstr "" @@ -2699,9 +3433,6 @@ msgstr "" msgid "Tunnel type" msgstr "" -msgid "Turbo Mode" -msgstr "Turbo Mode" - msgid "Tx-Power" msgstr "" @@ -2720,12 +3451,18 @@ msgstr "" msgid "USB Device" msgstr "" +msgid "USB Ports" +msgstr "" + msgid "UUID" msgstr "" msgid "Unable to dispatch" msgstr "" +msgid "Unavailable Seconds (UAS)" +msgstr "" + msgid "Unknown" msgstr "" @@ -2735,6 +3472,9 @@ msgstr "" msgid "Unmanaged" msgstr "" +msgid "Unmount" +msgstr "" + msgid "Unsaved Changes" msgstr "Unsaved Changes" @@ -2746,8 +3486,8 @@ msgstr "" msgid "" "Upload a sysupgrade-compatible image here to replace the running firmware. " -"Check \"Keep settings\" to retain the current configuration (requires an " -"OpenWrt compatible firmware image)." +"Check \"Keep settings\" to retain the current configuration (requires a " +"compatible firmware image)." msgstr "" msgid "Upload archive..." @@ -2803,9 +3543,10 @@ msgstr "" msgid "" "Use the Add Button to add a new lease entry. The MAC-Address indentifies the host, the IPv4-Address specifies to the fixed " -"address to use and the Hostname is assigned as symbolic name to the " -"requesting host." +"em> identifies the host, the IPv4-Address specifies the fixed " +"address to use, and the Hostname is assigned as a symbolic name to " +"the requesting host. The optional Lease time can be used to set non-" +"standard host-specific lease time, e.g. 12h, 3d or infinite." msgstr "" msgid "Used" @@ -2814,6 +3555,11 @@ msgstr "Used" msgid "Used Key Slot" msgstr "" +msgid "" +"Used for two different purposes: RADIUS NAS ID and 802.11r R0KH-ID. Not " +"needed with normal WPA(2)-PSK." +msgstr "" + msgid "User certificate (PEM encoded)" msgstr "" @@ -2826,7 +3572,7 @@ msgstr "Username" msgid "VC-Mux" msgstr "" -msgid "VLAN Interface" +msgid "VDSL" msgstr "" msgid "VLANs on %q" @@ -2835,6 +3581,12 @@ msgstr "" msgid "VLANs on %q (%s)" msgstr "" +msgid "VPN Local address" +msgstr "" + +msgid "VPN Local port" +msgstr "" + msgid "VPN Server" msgstr "" @@ -2844,6 +3596,12 @@ msgstr "" msgid "VPN Server's certificate SHA1 hash" msgstr "" +msgid "VPNC (CISCO 3000 (and others) VPN)" +msgstr "" + +msgid "Vendor" +msgstr "" + msgid "Vendor Class to send when requesting DHCP" msgstr "" @@ -2894,11 +3652,22 @@ msgstr "" msgid "Waiting for command to complete..." msgstr "" +msgid "Waiting for configuration to get applied… %ds" +msgstr "" + +msgid "Waiting for device..." +msgstr "" + msgid "Warning" msgstr "" -msgid "Warning: There are unsaved changes that will be lost while rebooting!" -msgstr "Warning: There are unsaved changes that will be lost while rebooting!" +msgid "Warning: There are unsaved changes that will get lost on reboot!" +msgstr "" + +msgid "" +"When using a PSK, the PMK can be generated locally without inter AP " +"communications" +msgstr "" msgid "Whether to create an IPv6 default route over the tunnel" msgstr "" @@ -2909,8 +3678,8 @@ msgstr "" msgid "Width" msgstr "" -msgid "Wifi" -msgstr "Wifi" +msgid "WireGuard VPN" +msgstr "" msgid "Wireless" msgstr "" @@ -2948,8 +3717,8 @@ msgstr "" msgid "Write received DNS requests to syslog" msgstr "" -msgid "XR Support" -msgstr "XR Support" +msgid "Write system log to file" +msgstr "" msgid "" "You can enable or disable installed init scripts here. Changes will applied " @@ -2961,7 +3730,7 @@ msgstr "" "scripts like \"network\", your device might become inaccessible!" msgid "" -"You must enable Java Script in your browser or LuCI will not work properly." +"You must enable JavaScript in your browser or LuCI will not work properly." msgstr "" msgid "" @@ -2976,9 +3745,6 @@ msgstr "" msgid "auto" msgstr "auto" -msgid "automatic" -msgstr "automatic" - msgid "baseT" msgstr "" @@ -3052,7 +3818,7 @@ msgstr "local DNS file" msgid "minimum 1280, maximum 1480" msgstr "" -msgid "navigation Navigation" +msgid "minutes" msgstr "" msgid "no" @@ -3079,6 +3845,9 @@ msgstr "" msgid "overlay" msgstr "" +msgid "random" +msgstr "" + msgid "relay mode" msgstr "" @@ -3088,12 +3857,6 @@ msgstr "" msgid "server mode" msgstr "" -msgid "skiplink1 Skip to navigation" -msgstr "" - -msgid "skiplink2 Skip to content" -msgstr "" - msgid "stateful-only" msgstr "" @@ -3106,6 +3869,9 @@ msgstr "" msgid "tagged" msgstr "" +msgid "time units (TUs / 1.024 ms) [1000-65535]" +msgstr "" + msgid "unknown" msgstr "" @@ -3127,873 +3893,83 @@ msgstr "" msgid "« Back" msgstr "« Back" -#~ msgid "Cached" -#~ msgstr "Cached" - -#~ msgid "Configures this mount as overlay storage for block-extroot" -#~ msgstr "Configures this mount as overlay storage for block-extroot" - -#~ msgid "Frequency Hopping" -#~ msgstr "Frequency Hopping" - -#~ msgid "40MHz 2nd channel above" -#~ msgstr "40MHz 2nd channel above" - -#~ msgid "40MHz 2nd channel below" -#~ msgstr "40MHz 2nd channel below" - -#~ msgid "Accept router advertisements" -#~ msgstr "Accept router advertisements" - -#~ msgid "Advertise IPv6 on network" -#~ msgstr "Advertise IPv6 on network" - -#~ msgid "Advertised network ID" -#~ msgstr "Advertised network ID" - -#~ msgid "Allowed range is 1 to 65535" -#~ msgstr "Allowed range is 1 to 65535" - -#~ msgid "Active Leases" -#~ msgstr "Active Leases" - -#~ msgid "Bit Rate" -#~ msgstr "Bit Rate" - -#~ msgid "Configuration / Apply" -#~ msgstr "Configuration / Apply" - -#~ msgid "Configuration / Changes" -#~ msgstr "Configuration / Changes" - -#~ msgid "Configuration / Revert" -#~ msgstr "Configuration / Revert" - -#~ msgid "MAC" -#~ msgstr "MAC" - -#~ msgid "Encr." -#~ msgstr "Encr." - -#~ msgid "WLAN-Scan" -#~ msgstr "WLAN-Scan" - -#~ msgid "" -#~ "Choose the network you want to attach to this wireless interface. Select " -#~ "unspecified to not attach any network or fill out the " -#~ "create field to define a new network." -#~ msgstr "" -#~ "Choose the network you want to attach to this wireless interface. Select " -#~ "unspecified to not attach any network or fill out the " -#~ "create field to define a new network." - -#~ msgid "Create Network" -#~ msgstr "Create Network" - -#~ msgid "Link" -#~ msgstr "Link" - -#~ msgid "Networks" -#~ msgstr "Networks" - -#~ msgid "Power" -#~ msgstr "Power" - -#~ msgid "Wifi networks in your local environment" -#~ msgstr "Wifi networks in your local environment" - -#~ msgid "" -#~ "CIDR-Notation: " -#~ "address/prefix" -#~ msgstr "" -#~ "CIDR-Notation: " -#~ "address/prefix" - -#~ msgid "DNS-Server" -#~ msgstr "DNS-Server" - -#~ msgid "IPv4-Broadcast" -#~ msgstr "IPv4-Broadcast" - -#~ msgid "IPv6-Address" -#~ msgstr "IPv6-Address" - -#~ msgid "" -#~ "The network ports on your router can be combined to several VLANs in which computers can " -#~ "communicate directly with each other. VLANs are often used to separate different network " -#~ "segments. Often there is by default one Uplink port for a connection to " -#~ "the next greater network like the internet and other ports for a local " -#~ "network." -#~ msgstr "" -#~ "The network ports on your router can be combined to several VLANs in which computers can " -#~ "communicate directly with each other. VLANs are often used to separate different network " -#~ "segments. Often there is by default one Uplink port for a connection to " -#~ "the next greater network like the internet and other ports for a local " -#~ "network." - -#~ msgid "Files to be kept when flashing a new firmware" -#~ msgstr "Files to be kept when flashing a new firmware" - -#~ msgid "General" -#~ msgstr "General" - -#~ msgid "" -#~ "Here you can customize the settings and the functionality of LuCI." -#~ msgstr "" -#~ "Here you can customize the settings and the functionality of LuCI." - -#~ msgid "Post-commit actions" -#~ msgstr "Post-commit actions" - -#~ msgid "" -#~ "These commands will be executed automatically when a given UCI configuration is committed " -#~ "allowing changes to be applied instantly." -#~ msgstr "" -#~ "These commands will be executed automatically when a given UCI configuration is committed " -#~ "allowing changes to be applied instantly." - -#~ msgid "Web UI" -#~ msgstr "Web UI" - -#~ msgid "PPTP-Server" -#~ msgstr "" -#~ "PPTP-Server" - -#~ msgid "ARP ping retries" -#~ msgstr "ARP ping retries" - -#~ msgid "ATM Settings" -#~ msgstr "ATM Settings" - -#~ msgid "Accept Router Advertisements" -#~ msgstr "Accept Router Advertisements" - -#~ msgid "Access point (APN)" -#~ msgstr "Access point (APN)" - -#~ msgid "Additional pppd options" -#~ msgstr "Additional pppd options" - -#~ msgid "Allowed range is 1 to FFFF" -#~ msgstr "Allowed range is 1 to FFFF" - -#~ msgid "Automatic Disconnect" -#~ msgstr "Automatic Disconnect" - -#~ msgid "Backup Archive" -#~ msgstr "Backup Archive" - -#~ msgid "" -#~ "Configure the local DNS server to use the name servers adverticed by the " -#~ "PPP peer" -#~ msgstr "" -#~ "Configure the local DNS server to use the name servers adverticed by the " -#~ "PPP peer" - -#~ msgid "Connect script" -#~ msgstr "Connect script" - -#~ msgid "Create backup" -#~ msgstr "Create backup" - -#~ msgid "Disconnect script" -#~ msgstr "Disconnect script" - -#~ msgid "Edit package lists and installation targets" -#~ msgstr "Edit package lists and installation targets" - -#~ msgid "Enable IPv6 on PPP link" -#~ msgstr "Enable IPv6 on PPP link" - -#~ msgid "Firmware image" -#~ msgstr "Firmware image" - -#~ msgid "" -#~ "Here you can backup and restore your router configuration and - if " -#~ "possible - reset the router to the default settings." -#~ msgstr "" -#~ "Here you can backup and restore your router configuration and - if " -#~ "possible - reset the router to the default settings." - -#~ msgid "Installation targets" -#~ msgstr "Installation targets" - -#~ msgid "Keep configuration files" -#~ msgstr "Keep configuration files" - -#~ msgid "Keep-Alive" -#~ msgstr "Keep-Alive" - -#~ msgid "" -#~ "Let pppd replace the current default route to use the PPP interface after " -#~ "successful connect" -#~ msgstr "" -#~ "Let pppd replace the current default route to use the PPP interface after " -#~ "successful connect" - -#~ msgid "Let pppd run this script after establishing the PPP link" -#~ msgstr "Let pppd run this script after establishing the PPP link" - -#~ msgid "Let pppd run this script before tearing down the PPP link" -#~ msgstr "Let pppd run this script before tearing down the PPP link" - -#~ msgid "" -#~ "Make sure that you provide the correct pin code here or you might lock " -#~ "your sim card!" -#~ msgstr "" -#~ "Make sure that you provide the correct pin code here or you might lock " -#~ "your sim card!" - -#~ msgid "" -#~ "Most of them are network servers, that offer a certain service for your " -#~ "device or network like shell access, serving webpages like LuCI, doing mesh routing, sending " -#~ "e-mails, ..." -#~ msgstr "" -#~ "Most of them are network servers, that offer a certain service for your " -#~ "device or network like shell access, serving webpages like LuCI, doing mesh routing, sending " -#~ "e-mails, ..." - -#~ msgid "Number of failed connection tests to initiate automatic reconnect" -#~ msgstr "Number of failed connection tests to initiate automatic reconnect" - -#~ msgid "PIN code" -#~ msgstr "PIN code" - -#~ msgid "PPP Settings" -#~ msgstr "PPP Settings" - -#~ msgid "Package lists" -#~ msgstr "Package lists" - -#~ msgid "Proceed reverting all settings and resetting to firmware defaults?" -#~ msgstr "Proceed reverting all settings and resetting to firmware defaults?" - -#~ msgid "Processor" -#~ msgstr "Processor" - -#~ msgid "Radius-Port" -#~ msgstr "Radius-Port" - -#~ msgid "Radius-Server" -#~ msgstr "Radius-Server" - -#~ msgid "Replace default route" -#~ msgstr "Replace default route" - -#~ msgid "Reset router to defaults" -#~ msgstr "Reset router to defaults" - -#~ msgid "" -#~ "Seconds to wait for the modem to become ready before attempting to connect" -#~ msgstr "" -#~ "Seconds to wait for the modem to become ready before attempting to connect" - -#~ msgid "Service type" -#~ msgstr "Service type" - -#~ msgid "Services and daemons perform certain tasks on your device." -#~ msgstr "Services and daemons perform certain tasks on your device." - -#~ msgid "Settings" -#~ msgstr "Settings" - -#~ msgid "Setup wait time" -#~ msgstr "Setup wait time" - -#~ msgid "" -#~ "Sorry. OpenWrt does not support a system upgrade on this platform.
" -#~ "You need to manually flash your device." -#~ msgstr "" -#~ "Sorry. OpenWrt does not support a system upgrade on this platform.
" -#~ "You need to manually flash your device." - -#~ msgid "Specify additional command line arguments for pppd here" -#~ msgstr "Specify additional command line arguments for pppd here" - -#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0" -#~ msgstr "The device node of your modem, e.g. /dev/ttyUSB0" - -#~ msgid "Time (in seconds) after which an unused connection will be closed" -#~ msgstr "Time (in seconds) after which an unused connection will be closed" - -#~ msgid "Update package lists" -#~ msgstr "Update package lists" - -#~ msgid "Upload an OpenWrt image file to reflash the device." -#~ msgstr "Upload an OpenWrt image file to reflash the device." - -#~ msgid "Upload image" -#~ msgstr "Upload image" - -#~ msgid "Use peer DNS" -#~ msgstr "Use peer DNS" - -#~ msgid "" -#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, " -#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support" -#~ msgstr "" -#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, " -#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support" - -#~ msgid "back" -#~ msgstr "back" - -#~ msgid "buffered" -#~ msgstr "buffered" - -#~ msgid "cached" -#~ msgstr "cached" - -#~ msgid "free" -#~ msgstr "free" - -#~ msgid "static" -#~ msgstr "static" - -#~ msgid "" -#~ "LuCI is a collection " -#~ "of free Lua software including an MVC-Webframework and webinterface for embedded devices. LuCI is licensed under the " -#~ "Apache-License." -#~ msgstr "" -#~ "LuCI is a collection " -#~ "of free Lua software including an MVC-Webframework and webinterface for embedded devices. LuCI is licensed under the " -#~ "Apache-License." - -#~ msgid "SSH-Keys" -#~ msgstr "SSH-Keys" - -#~ msgid "" -#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve " -#~ "LuCI" -#~ msgstr "" -#~ "A lightweight HTTP/1.1 webserver written in C and Lua designed to serve " -#~ "LuCI" - -#~ msgid "" -#~ "A small webserver which can be used to serve LuCI." -#~ msgstr "" -#~ "A small webserver which can be used to serve LuCI." - -#~ msgid "About" -#~ msgstr "About" - -#~ msgid "Active IP Connections" -#~ msgstr "Active IP Connections" - -#~ msgid "Addresses" -#~ msgstr "Addresses" - -#~ msgid "Admin Password" -#~ msgstr "Admin Password" - -#~ msgid "Alias" -#~ msgstr "Alias" - -#~ msgid "Authentication Realm" -#~ msgstr "Authentication Realm" - -#~ msgid "Bridge Port" -#~ msgstr "Bridge Port" - -#~ msgid "" -#~ "Change the password of the system administrator (User root)" -#~ msgstr "" -#~ "Change the password of the system administrator (User root)" - -#~ msgid "Client + WDS" -#~ msgstr "Client + WDS" - -#~ msgid "Configuration file" -#~ msgstr "Configuration file" - -#~ msgid "Connection timeout" -#~ msgstr "Connection timeout" - -#~ msgid "Contributing Developers" -#~ msgstr "Contributing Developers" - -#~ msgid "DHCP assigned" -#~ msgstr "DHCP assigned" - -#~ msgid "Document root" -#~ msgstr "Document root" - -#~ msgid "Enable Keep-Alive" -#~ msgstr "Enable Keep-Alive" - -#~ msgid "Ethernet Bridge" -#~ msgstr "Ethernet Bridge" - -#~ msgid "" -#~ "Here you can paste public SSH-Keys " -#~ "(one per line) for SSH public-key " -#~ "authentication." -#~ msgstr "" -#~ "Here you can paste public SSH-Keys " -#~ "(one per line) for SSH public-key " -#~ "authentication." - -#~ msgid "ID" -#~ msgstr "ID" - -#~ msgid "IP Configuration" -#~ msgstr "IP Configuration" - -#~ msgid "Interface Status" -#~ msgstr "Interface Status" - -#~ msgid "Lead Development" -#~ msgstr "Lead Development" - -#~ msgid "Master" -#~ msgstr "Master" - -#~ msgid "Master + WDS" -#~ msgstr "Master + WDS" - -#~ msgid "Not configured" -#~ msgstr "Not configured" - -#~ msgid "Password successfully changed" -#~ msgstr "Password successfully changed" - -#~ msgid "Plugin path" -#~ msgstr "Plugin path" - -#~ msgid "Ports" -#~ msgstr "Ports" - -#~ msgid "Primary" -#~ msgstr "Primary" - -#~ msgid "Project Homepage" -#~ msgstr "Project Homepage" - -#~ msgid "Pseudo Ad-Hoc" -#~ msgstr "Pseudo Ad-Hoc" - -#~ msgid "STP" -#~ msgstr "STP" - -#~ msgid "Thanks To" -#~ msgstr "Thanks To" - -#~ msgid "" -#~ "The realm which will be displayed at the authentication prompt for " -#~ "protected pages." -#~ msgstr "" -#~ "The realm which will be displayed at the authentication prompt for " -#~ "protected pages." - -#~ msgid "Unknown Error" -#~ msgstr "Unknown Error" - -#~ msgid "VLAN" -#~ msgstr "VLAN" - -#~ msgid "defaults to /etc/httpd.conf" -#~ msgstr "defaults to /etc/httpd.conf" +#~ msgid "Apply" +#~ msgstr "Apply" -#~ msgid "OPKG error code %i" -#~ msgstr "OPKG error code %i" - -#~ msgid "Package lists updated" -#~ msgstr "Package lists updated" +#~ msgid "Applying changes" +#~ msgstr "Applying changes" -#~ msgid "Upgrade installed packages" -#~ msgstr "Upgrade installed packages" - -#~ msgid "" -#~ "Also kernel or service logfiles can be viewed here to get an overview " -#~ "over their current state." -#~ msgstr "" -#~ "Also kernel or service logfiles can be viewed here to get an overview " -#~ "over their current state." - -#~ msgid "" -#~ "Here you can find information about the current system status like CPU clock frequency, memory " -#~ "usage or network interface data." -#~ msgstr "" -#~ "Here you can find information about the current system status like CPU clock frequency, memory " -#~ "usage or network interface data." - -#~ msgid "Search file..." -#~ msgstr "Search file..." - -#~ msgid "" -#~ "LuCI is a free, " -#~ "flexible, and user friendly graphical interface for configuring OpenWrt " -#~ "Kamikaze." -#~ msgstr "" -#~ "LuCI is a free, " -#~ "flexible, and user friendly graphical interface for configuring OpenWrt " -#~ "Kamikaze." +#~ msgid "Configuration applied." +#~ msgstr "Configuration applied." -#~ msgid "And now have fun with your router!" -#~ msgstr "And now have fun with your router!" +#~ msgid "Action" +#~ msgstr "Action" -#~ msgid "" -#~ "As we always want to improve this interface we are looking forward to " -#~ "your feedback and suggestions." -#~ msgstr "" -#~ "As we always want to improve this interface we are looking forward to " -#~ "your feedback and suggestions." +#~ msgid "Buttons" +#~ msgstr "Buttons" -#~ msgid "Hello!" -#~ msgstr "Hello!" +#~ msgid "Handler" +#~ msgstr "Handler" -#~ msgid "" -#~ "Notice: In LuCI " -#~ "changes have to be confirmed by clicking Changes - Save & Apply " -#~ "before being applied." -#~ msgstr "" -#~ "Notice: In LuCI " -#~ "changes have to be confirmed by clicking Changes - Save & Apply " -#~ "before being applied." - -#~ msgid "" -#~ "On the following pages you can adjust all important settings of your " -#~ "router." -#~ msgstr "" -#~ "On the following pages you can adjust all important settings of your " -#~ "router." - -#~ msgid "The LuCI Team" -#~ msgstr "The LuCI Team" - -#~ msgid "" -#~ "This is the administration area of LuCI." -#~ msgstr "" -#~ "This is the administration area of LuCI." - -#~ msgid "User Interface" -#~ msgstr "User Interface" - -#~ msgid "enable" -#~ msgstr "enable" - -#~ msgid "(hidden)" -#~ msgstr "(hidden)" - -#~ msgid "(optional)" -#~ msgstr "(optional)" - -#~ msgid "DNS-Port" -#~ msgstr "DNS-Port" - -#~ msgid "" -#~ "DNS-Server will be queried in " -#~ "the order of the resolvfile" -#~ msgstr "" -#~ "DNS-Server will be queried in " -#~ "the order of the resolvfile" - -#~ msgid "" -#~ "max. DHCP-Leases" -#~ msgstr "" -#~ "max. DHCP-Leases" - -#~ msgid "" -#~ "max. EDNS0 packet size" -#~ msgstr "" -#~ "max. EDNS0 packet size" - -#~ msgid "AP-Isolation" -#~ msgstr "AP-Isolation" - -#~ msgid "Add the Wifi network to physical network" -#~ msgstr "Add the Wifi network to physical network" - -#~ msgid "Aliases" -#~ msgstr "Aliases" - -#~ msgid "Attach to existing network" -#~ msgstr "Attach to existing network" +#~ msgid "Maximum hold time" +#~ msgstr "Maximum hold time" -#~ msgid "Clamp Segment Size" -#~ msgstr "Clamp Segment Size" +#~ msgid "Minimum hold time" +#~ msgstr "Minimum hold time" -#~ msgid "Create Or Attach Network" -#~ msgstr "Create Or Attach Network" +#~ msgid "Specifies the button state to handle" +#~ msgstr "Specifies the button state to handle" -#~ msgid "DHCP" -#~ msgstr "DHCP" +#~ msgid "Leasetime" +#~ msgstr "Leasetime" -#~ msgid "Devices" -#~ msgstr "Devices" +#~ msgid "automatic" +#~ msgstr "automatic" -#~ msgid "Don't forward reverse lookups for local networks" -#~ msgstr "Don't forward reverse lookups for local networks" +#~ msgid "AR Support" +#~ msgstr "AR Support" -#~ msgid "Enable TFTP-Server" -#~ msgstr "Enable TFTP-Server" +#~ msgid "Background Scan" +#~ msgstr "Background Scan" -#~ msgid "Errors" -#~ msgstr "Errors" +#~ msgid "Compression" +#~ msgstr "Compression" -#~ msgid "Essentials" -#~ msgstr "Essentials" +#~ msgid "Disable HW-Beacon timer" +#~ msgstr "Disable HW-Beacon timer" -#~ msgid "Expand Hosts" -#~ msgstr "Expand Hosts" +#~ msgid "Do not send probe responses" +#~ msgstr "Do not send probe responses" -#~ msgid "First leased address" -#~ msgstr "First leased address" +#~ msgid "Fast Frames" +#~ msgstr "Fast Frames" -#~ msgid "" -#~ "Fixes problems with unreachable websites, submitting forms or other " -#~ "unexpected behaviour for some ISPs." -#~ msgstr "" -#~ "Fixes problems with unreachable websites, submitting forms or other " -#~ "unexpected behaviour for some ISPs." +#~ msgid "Maximum Rate" +#~ msgstr "Maximum Rate" -#~ msgid "Hardware Address" -#~ msgstr "Hardware Address" +#~ msgid "Minimum Rate" +#~ msgstr "Minimum Rate" -#~ msgid "Here you can configure installed wifi devices." -#~ msgstr "Here you can configure installed wifi devices." - -#~ msgid "" -#~ "If the interface is attached to an existing network it will be " -#~ "bridged to the existing interfaces and is covered by the " -#~ "firewall zone of the choosen network.
Uncheck the attach option to " -#~ "define a new standalone network for this interface." -#~ msgstr "" -#~ "If the interface is attached to an existing network it will be " -#~ "bridged to the existing interfaces and is covered by the " -#~ "firewall zone of the choosen network.
Uncheck the attach option to " -#~ "define a new standalone network for this interface." - -#~ msgid "Ignore /etc/hosts" -#~ msgstr "Ignore /etc/hosts" - -#~ msgid "Independent (Ad-Hoc)" -#~ msgstr "Independent (Ad-Hoc)" - -#~ msgid "Internet Connection" -#~ msgstr "Internet Connection" - -#~ msgid "Join (Client)" -#~ msgstr "Join (Client)" - -#~ msgid "Leases" -#~ msgstr "Leases" - -#~ msgid "Local Domain" -#~ msgstr "Local Domain" - -#~ msgid "Local Network" -#~ msgstr "Local Network" - -#~ msgid "Local Server" -#~ msgstr "Local Server" - -#~ msgid "Network Boot Image" -#~ msgstr "Network Boot Image" - -#~ msgid "" -#~ "Network Name (ESSID)" -#~ msgstr "" -#~ "Network Name (ESSID)" - -#~ msgid "Number of leased addresses" -#~ msgstr "Number of leased addresses" - -#~ msgid "Perform Actions" -#~ msgstr "Perform Actions" - -#~ msgid "Prevents Client to Client communication" -#~ msgstr "Prevents Client to Client communication" - -#~ msgid "Provide (Access Point)" -#~ msgstr "Provide (Access Point)" - -#~ msgid "Resolvfile" -#~ msgstr "Resolvfile" - -#~ msgid "TFTP-Server Root" -#~ msgstr "TFTP-Server Root" - -#~ msgid "TX / RX" -#~ msgstr "TX / RX" - -#~ msgid "The following changes have been applied" -#~ msgstr "The following changes have been applied" - -#~ msgid "" -#~ "When flashing a new firmware with LuCI these files will be added to the new firmware " -#~ "installation." -#~ msgstr "" -#~ "When flashing a new firmware with LuCI these files will be added to the new firmware " -#~ "installation." - -#~ msgid "Wireless Scan" -#~ msgstr "Wireless Scan" - -#~ msgid "" -#~ "With DHCP " -#~ "network members can automatically receive their network settings (IP-address, netmask, DNS-server, ...)." -#~ msgstr "" -#~ "With DHCP " -#~ "network members can automatically receive their network settings (IP-address, netmask, DNS-server, ...)." - -#~ msgid "" -#~ "You are about to join the wireless network %s. " -#~ "In order to complete the process, you need to provide some additional " -#~ "details." -#~ msgstr "" -#~ "You are about to join the wireless network %s. " -#~ "In order to complete the process, you need to provide some additional " -#~ "details." - -#~ msgid "" -#~ "You can run several wifi networks with one device. Be aware that there " -#~ "are certain hardware and driverspecific restrictions. Normally you can " -#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network " -#~ "simultaneously." -#~ msgstr "" -#~ "You can run several wifi networks with one device. Be aware that there " -#~ "are certain hardware and driverspecific restrictions. Normally you can " -#~ "operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode network " -#~ "simultaneously." - -#~ msgid "" -#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP " -#~ "support" -#~ msgstr "" -#~ "You need to install \"ppp-mod-pppoe\" for PPPoE or \"pptp\" for PPtP " -#~ "support" - -#~ msgid "" -#~ "You need to install wpa-supplicant to use WPA!" -#~ msgstr "" -#~ "You need to install wpa-supplicant to use WPA!" - -#~ msgid "" -#~ "You need to install the Broadcom nas supplicant " -#~ "to use WPA!" -#~ msgstr "" -#~ "You need to install the Broadcom nas supplicant " -#~ "to use WPA!" - -#~ msgid "Zone" -#~ msgstr "Zone" - -#~ msgid "additional hostfile" -#~ msgstr "additional hostfile" - -#~ msgid "adds domain names to hostentries in the resolv file" -#~ msgstr "adds domain names to hostentries in the resolv file" - -#~ msgid "automatically reconnect" -#~ msgstr "automatically reconnect" - -#~ msgid "concurrent queries" -#~ msgstr "concurrent queries" - -#~ msgid "" -#~ "disable DHCP " -#~ "for this interface" -#~ msgstr "" -#~ "disable DHCP " -#~ "for this interface" - -#~ msgid "disconnect when idle for" -#~ msgstr "disconnect when idle for" - -#~ msgid "don't cache unknown" -#~ msgstr "don't cache unknown" - -#~ msgid "" -#~ "filter useless DNS-queries of " -#~ "Windows-systems" -#~ msgstr "" -#~ "filter useless DNS-queries of " -#~ "Windows-systems" - -#~ msgid "installed" -#~ msgstr "installed" - -#~ msgid "localises the hostname depending on its subnet" -#~ msgstr "localises the hostname depending on its subnet" - -#~ msgid "manual" -#~ msgstr "manual" - -#~ msgid "not installed" -#~ msgstr "not installed" - -#~ msgid "" -#~ "prevents caching of negative DNS-replies" -#~ msgstr "" -#~ "prevents caching of negative DNS-replies" - -#~ msgid "query port" -#~ msgstr "query port" - -#~ msgid "transmitted / received" -#~ msgstr "transmitted / received" - -#~ msgid "all" -#~ msgstr "all" - -#~ msgid "Code" -#~ msgstr "Code" - -#~ msgid "Distance" -#~ msgstr "Distance" +#~ msgid "Multicast Rate" +#~ msgstr "Multicast Rate" -#~ msgid "Legend" -#~ msgstr "Legend" +#~ msgid "Outdoor Channels" +#~ msgstr "Outdoor Channels" -#~ msgid "Library" -#~ msgstr "Library" +#~ msgid "Regulatory Domain" +#~ msgstr "Regulatory Domain" -#~ msgid "see '%s' manpage" -#~ msgstr "see '%s' manpage" +#~ msgid "Separate WDS" +#~ msgstr "Separate WDS" -#~ msgid "Package Manager" -#~ msgstr "Package Manager" +#~ msgid "Turbo Mode" +#~ msgstr "Turbo Mode" -#~ msgid "Service" -#~ msgstr "Service" +#~ msgid "XR Support" +#~ msgstr "XR Support" -#~ msgid "Statistics" -#~ msgstr "Statistics" +#~ msgid "An additional network will be created if you leave this unchecked." +#~ msgstr "An additional network will be created if you leave this unchecked." -#~ msgid "zone" -#~ msgstr "Zone" +#~ msgid "CPU" +#~ msgstr "CPU"