X-Git-Url: https://git.archive.openwrt.org/?p=project%2Fluci.git;a=blobdiff_plain;f=modules%2Fadmin-full%2Fluasrc%2Fmodel%2Fcbi%2Fadmin_network%2Fwifi.lua;h=8ecfdda2585047ab33e1dd5ba6add144e78ec2fc;hp=720c440532c3d55eaaf0dd707e653522fef3304a;hb=7ae988f34299f882f5e4c7bb55fdbba3d09dd162;hpb=2e8d0a9b6be2d8136024d6ccf94560ac00f2ca1a

diff --git a/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua b/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
index 720c44053..8ecfdda25 100644
--- a/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
+++ b/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
@@ -14,40 +14,72 @@ $Id$
 
 local wa = require "luci.tools.webadmin"
 local nw = require "luci.model.network"
+local ww = require "luci.model.wireless"
 local fs = require "nixio.fs"
 
 arg[1] = arg[1] or ""
 arg[2] = arg[2] or ""
 
-m = Map("wireless", translate("networks"), translate("a_w_networks1"))
+m = Map("wireless", "",
+	translate("The <em>Device Configuration</em> section covers physical settings of the radio " ..
+		"hardware such as channel, transmit power or antenna selection which is shared among all " ..
+		"defined wireless networks (if the radio hardware is multi-SSID capable). Per network settings " ..
+		"like encryption or operation mode are grouped in the <em>Interface Configuration</em>."))
+
 m:chain("network")
+
+m.breadcrumb = {
+	{ luci.dispatcher.build_url("admin/network/wireless"), translate("Wireless Networks") }
+}
+
+local ifsection
+
+function m.on_commit(map)
+	nw.init(map.uci)
+	ww.init(map.uci)
+
+	local wnet = ww:get_network(arg[2])
+	if ifsection and wnet then
+		ifsection.section = wnet.sid
+	end
+end
+
 nw.init(m.uci)
+ww.init(m.uci)
 
-local iw = nil
-local tx_powers = nil
+local wnet = ww:get_network(arg[2])
 
-m.uci:foreach("wireless", "wifi-iface",
-	function(s)
-		if s.device == arg[1] and not iw then
-			iw = luci.sys.wifi.getiwinfo(s.ifname or s.device)
-			tx_powers = iw.txpwrlist or { }
-		end
-	end)
+-- redirect to overview page if network does not exist anymore (e.g. after a revert)
+if not wnet then
+	luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless"))
+	return
+end
 
-s = m:section(NamedSection, arg[1], "wifi-device", translate("device") .. " " .. arg[1])
+m.title = ww:get_i18n(wnet)
+
+
+local iw = luci.sys.wifi.getiwinfo(arg[1])
+local tx_powers = iw.txpwrlist or { }
+
+
+s = m:section(NamedSection, arg[1], "wifi-device", translate("Device Configuration"))
 s.addremove = false
 
-s:tab("general", translate("a_w_general", "General Setup"))
-s:tab("macfilter", translate("a_w_macfilter", "MAC-Filter"))
-s:tab("advanced", translate("a_w_advanced", "Advanced Settings"))
+s:tab("general", translate("General Setup"))
+s:tab("macfilter", translate("MAC-Filter"))
+s:tab("advanced", translate("Advanced Settings"))
 
 --[[
-back = s:option(DummyValue, "_overview", translate("overview"))
+back = s:option(DummyValue, "_overview", translate("Overview"))
 back.value = ""
 back.titleref = luci.dispatcher.build_url("admin", "network", "wireless")
 ]]
 
-en = s:taboption("general", Flag, "disabled", translate("enable"))
+st = s:taboption("general", DummyValue, "__status", translate("Status"))
+st.template = "admin_network/wifi_status"
+st.ifname   = arg[1]
+
+en = s:taboption("general", Flag, "disabled", translate("Enable device"))
 en.enabled = "0"
 en.disabled = "1"
 en.rmempty = false
@@ -56,16 +88,19 @@ function en.cfgvalue(self, section)
 	return Flag.cfgvalue(self, section) or "0"
 end
 
-s:taboption("general", DummyValue, "type", translate("type"))
 
 local hwtype = m:get(arg[1], "type")
+local htcaps = m:get(arg[1], "ht_capab") and true or false
+
 -- NanoFoo
 local nsantenna = m:get(arg[1], "antenna")
 
-ch = s:taboption("general", Value, "channel", translate("a_w_channel"))
-ch:value("auto", translate("wifi_auto"))
-for c, f in luci.util.kspairs(luci.sys.wifi.channels()) do
-	ch:value(c, "%i (%.3f GHz)" %{ c, f })
+ch = s:taboption("general", Value, "channel", translate("Channel"))
+ch:value("auto", translate("auto"))
+for _, f in ipairs(iw and iw.freqlist or luci.sys.wifi.channels()) do
+	if not f.restricted then
+		ch:value(f.channel, "%i (%.3f GHz)" %{ f.channel, f.mhz / 1000 })
+	end
 end
 
 
@@ -74,12 +109,49 @@ end
 if hwtype == "mac80211" then
 	tp = s:taboption("general",
 		(tx_powers and #tx_powers > 0) and ListValue or Value,
-		"txpower", translate("a_w_txpwr"), "dBm")
+		"txpower", translate("Transmit Power"), "dBm")
 
 	tp.rmempty = true
-	for _, p in ipairs(iw and iw.txpwrlist or {}) do
+	tp.default = tostring(iw and iw.txpower or tx_powers[#tx_powers])
+	for _, p in ipairs(tx_powers or {}) do
 		tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
 	end
+
+	mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
+	mode:value("", translate("auto"))
+	mode:value("11b", "802.11b")
+	mode:value("11g", "802.11g")
+	mode:value("11a", "802.11a")
+
+	if htcaps then
+		mode:value("11ng", "802.11g+n")
+		mode:value("11na", "802.11a+n")
+
+		htmode = s:taboption("advanced", ListValue, "htmode", translate("HT mode"))
+		htmode:depends("hwmode", "11na")
+		htmode:depends("hwmode", "11ng")
+		htmode:value("HT20", "20MHz")
+		htmode:value("HT40-", translate("40MHz 2nd channel below"))
+		htmode:value("HT40+", translate("40MHz 2nd channel above"))
+
+		--htcapab = s:taboption("advanced", DynamicList, "ht_capab", translate("HT capabilities"))
+		--htcapab:depends("hwmode", "11na")
+		--htcapab:depends("hwmode", "11ng")
+	end
+
+	local cl = iw and iw.countrylist
+	if cl and #cl > 0 then
+		cc = s:taboption("advanced", ListValue, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
+		cc.default = tostring(iw and iw.country or "00")
+		for _, c in ipairs(cl) do
+			cc:value(c.alpha2, "%s - %s" %{ c.alpha2, c.name })
+		end
+	else
+		s:taboption("advanced", Value, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
+	end
+
+	s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
+		translate("Distance to farthest network member in meters."))
 end
 
 
@@ -88,57 +160,57 @@ end
 if hwtype == "atheros" then
 	tp = s:taboption("general",
 		(#tx_powers > 0) and ListValue or Value,
-		"txpower", translate("a_w_txpwr"), "dBm")
+		"txpower", translate("Transmit Power"), "dBm")
 
 	tp.rmempty = true
 	for _, p in ipairs(iw.txpwrlist) do
 		tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
 	end
 
-	mode = s:taboption("advanced", ListValue, "hwmode", translate("mode"))
-	mode:value("", translate("wifi_auto"))
+	mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
+	mode:value("", translate("auto"))
 	mode:value("11b", "802.11b")
 	mode:value("11g", "802.11g")
 	mode:value("11a", "802.11a")
 	mode:value("11bg", "802.11b+g")
 	mode:value("11gst", "802.11g + Turbo")
 	mode:value("11ast", "802.11a + Turbo")
-	mode:value("fh", translate("wifi_fh"))
+	mode:value("fh", translate("Frequency Hopping"))
 
-	s:taboption("advanced", Flag, "diversity", translate("wifi_diversity")).rmempty = false
+	s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
 
 	if not nsantenna then
-		ant1 = s:taboption("advanced", ListValue, "txantenna", translate("wifi_txantenna"))
+		ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
 		ant1.widget = "radio"
 		ant1.orientation = "horizontal"
 		ant1:depends("diversity", "")
-		ant1:value("0", translate("wifi_auto"))
-		ant1:value("1", translate("wifi_ant1", "Antenna 1"))
-		ant1:value("2", translate("wifi_ant2", "Antenna 2"))
+		ant1:value("0", translate("auto"))
+		ant1:value("1", translate("Antenna 1"))
+		ant1:value("2", translate("Antenna 2"))
 
-		ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("wifi_rxantenna"))
+		ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
 		ant2.widget = "radio"
 		ant2.orientation = "horizontal"
 		ant2:depends("diversity", "")
-		ant2:value("0", translate("wifi_auto"))
-		ant2:value("1", translate("wifi_ant1", "Antenna 1"))
-		ant2:value("2", translate("wifi_ant2", "Antenna 2"))
+		ant2:value("0", translate("auto"))
+		ant2:value("1", translate("Antenna 1"))
+		ant2:value("2", translate("Antenna 2"))
 
 	else -- NanoFoo
-		local ant = s:taboption("advanced", ListValue, "antenna", translate("wifi_txantenna"))
+		local ant = s:taboption("advanced", ListValue, "antenna", translate("Transmitter Antenna"))
 		ant:value("auto")
 		ant:value("vertical")
 		ant:value("horizontal")
 		ant:value("external")
 	end
 
-	s:taboption("advanced", Value, "distance", translate("wifi_distance"),
-		translate("wifi_distance_desc"))
-	s:taboption("advanced", Value, "regdomain", translate("wifi_regdomain"))
-	s:taboption("advanced", Value, "country", translate("wifi_country"))
-	s:taboption("advanced", Flag, "outdoor", translate("wifi_outdoor"))
+	s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
+		translate("Distance to farthest network member in meters."))
+	s:taboption("advanced", Value, "regdomain", translate("Regulatory Domain"))
+	s:taboption("advanced", Value, "country", translate("Country Code"))
+	s:taboption("advanced", Flag, "outdoor", translate("Outdoor Channels"))
 
-	--s:option(Flag, "nosbeacon", translate("wifi_nosbeacon"))
+	--s:option(Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
 end
 
 
@@ -148,385 +220,452 @@ end
 if hwtype == "broadcom" then
 	tp = s:taboption("general",
 		(#tx_powers > 0) and ListValue or Value,
-		"txpower", translate("a_w_txpwr"), "dBm")
+		"txpower", translate("Transmit Power"), "dBm")
 
 	tp.rmempty = true
 	for _, p in ipairs(iw.txpwrlist) do
 		tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
-	end	
+	end
 
-	mp = s:taboption("macfilter", ListValue, "macfilter", translate("wifi_macpolicy"))
+	mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
+	mode:value("11bg", "802.11b+g")
+	mode:value("11b", "802.11b")
+	mode:value("11g", "802.11g")
+	mode:value("11gst", "802.11g + Turbo")
+
+	mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
 	mp:value("", translate("disable"))
-	mp:value("allow", translate("wifi_whitelist"))
-	mp:value("deny", translate("wifi_blacklist"))
-	ml = s:taboption("macfilter", DynamicList, "maclist", translate("wifi_maclist"))
+	mp:value("allow", translate("Allow listed only"))
+	mp:value("deny", translate("Allow all except listed"))
+	ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 	ml:depends({macfilter="allow"})
 	ml:depends({macfilter="deny"})
 
-	ant1 = s:taboption("advanced", ListValue, "txantenna", translate("wifi_txantenna"))
+	ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
 	ant1.widget = "radio"
 	ant1:depends("diversity", "")
-	ant1:value("3", translate("wifi_auto"))
-	ant1:value("0", translate("wifi_ant1", "Antenna 1"))
-	ant1:value("1", translate("wifi_ant2", "Antenna 2"))
+	ant1:value("3", translate("auto"))
+	ant1:value("0", translate("Antenna 1"))
+	ant1:value("1", translate("Antenna 2"))
 
-	ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("wifi_rxantenna"))
+	ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
 	ant2.widget = "radio"
 	ant2:depends("diversity", "")
-	ant2:value("3", translate("wifi_auto"))
-	ant2:value("0", translate("wifi_ant1", "Antenna 1"))
-	ant2:value("1", translate("wifi_ant2", "Antenna 2"))
+	ant2:value("3", translate("auto"))
+	ant2:value("0", translate("Antenna 1"))
+	ant2:value("1", translate("Antenna 2"))
 
-	s:taboption("advanced", Flag, "frameburst", translate("wifi_bursting"))
+	s:taboption("advanced", Flag, "frameburst", translate("Frame Bursting"))
 
-	s:taboption("advanced", Value, "distance", translate("wifi_distance"))
-	--s:option(Value, "slottime", translate("wifi_slottime"))
+	s:taboption("advanced", Value, "distance", translate("Distance Optimization"))
+	--s:option(Value, "slottime", translate("Slot time"))
 
-	s:taboption("advanced", Value, "country", translate("wifi_country"))
-	s:taboption("advanced", Value, "maxassoc", translate("wifi_maxassoc"))
+	s:taboption("advanced", Value, "country", translate("Country Code"))
+	s:taboption("advanced", Value, "maxassoc", translate("Connection Limit"))
 end
 
 
 --------------------- HostAP Device ---------------------
 
 if hwtype == "prism2" then
-	s:taboption("advanced", Value, "txpower", translate("a_w_txpwr"), "att units").rmempty = true
+	s:taboption("advanced", Value, "txpower", translate("Transmit Power"), "att units").rmempty = true
 
-	s:taboption("advanced", Flag, "diversity", translate("wifi_diversity")).rmempty = false
+	s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
 
-	s:taboption("advanced", Value, "txantenna", translate("wifi_txantenna"))
-	s:taboption("advanced", Value, "rxantenna", translate("wifi_rxantenna"))
+	s:taboption("advanced", Value, "txantenna", translate("Transmitter Antenna"))
+	s:taboption("advanced", Value, "rxantenna", translate("Receiver Antenna"))
 end
 
 
 ----------------------- Interface -----------------------
 
-s = m:section(NamedSection, arg[2], "wifi-iface", translate("interfaces"))
-s.addremove = false
-s.anonymous = true
-s.defaults.device = arg[1]
-
-s:tab("general", translate("a_w_general", "General Setup"))
-s:tab("encryption", translate("a_w_security", "Wireless Security"))
-s:tab("macfilter", translate("a_w_macfilter", "MAC-Filter"))
-s:tab("advanced", translate("a_w_advanced", "Advanced Settings"))
-
-s:taboption("general", Value, "ssid", translate("wifi_essid"))
-
-mode = s:taboption("general", ListValue, "mode", translate("mode"))
-mode.override_values = true
-mode:value("ap", translate("a_w_ap"))
-mode:value("sta", translate("a_w_client"))
-mode:value("adhoc", translate("a_w_adhoc"))
-
-bssid = s:taboption("general", Value, "bssid", translate("wifi_bssid"))
-
-network = s:taboption("general", Value, "network", translate("network"), translate("a_w_network1"))
-network.rmempty = true
-network.template = "cbi/network_netlist"
-network.widget = "radio"
-
-function network.write(self, section, value)
-	local i = nw:get_interface(section)
-	if i then
-		if value == '-' then
-			value = m:formvalue(self:cbid(section) .. ".newnet")
-			if value and #value > 0 then
-				local n = nw:add_network(value, {type="bridge", proto="none"})
-				if n then n:add_interface(i) end
+local wnet = ww:get_network(arg[2])
+
+if wnet then
+	s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
+	ifsection = s
+	s.addremove = false
+	s.anonymous = true
+	s.defaults.device = arg[1]
+
+	s:tab("general", translate("General Setup"))
+	s:tab("encryption", translate("Wireless Security"))
+	s:tab("macfilter", translate("MAC-Filter"))
+	s:tab("advanced", translate("Advanced Settings"))
+
+	s:taboption("general", Value, "ssid", translate("<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+
+	mode = s:taboption("general", ListValue, "mode", translate("Mode"))
+	mode.override_values = true
+	mode:value("ap", translate("Access Point"))
+	mode:value("sta", translate("Client"))
+	mode:value("adhoc", translate("Ad-Hoc"))
+
+	bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"))
+
+	network = s:taboption("general", Value, "network", translate("Network"),
+		translate("Choose the network you want to attach to this wireless interface. " ..
+			"Select <em>unspecified</em> to not attach any network or fill out the " ..
+			"<em>create</em> field to define a new network."))
+
+	network.rmempty = true
+	network.template = "cbi/network_netlist"
+	network.widget = "radio"
+
+	function network.write(self, section, value)
+		local i = nw:get_interface(section)
+		if i then
+			if value == '-' then
+				value = m:formvalue(self:cbid(section) .. ".newnet")
+				if value and #value > 0 then
+					local n = nw:add_network(value, {type="bridge", proto="none"})
+					if n then n:add_interface(i) end
+				else
+					local n = i:get_network()
+					if n then n:del_interface(i) end
+				end
 			else
-				local n = i:get_network()
-				if n then n:del_interface(i) end
-			end
-		else
-			local n = nw:get_network(value)
-			if n then
-				n:type("bridge")
-				n:add_interface(i)
+				local n = nw:get_network(value)
+				if n then
+					n:type("bridge")
+					n:add_interface(i)
+				end
 			end
 		end
 	end
-end
-
--------------------- MAC80211 Interface ----------------------
-
-if hwtype == "mac80211" then
-	if fs.access("/usr/sbin/iw") then
-		mode:value("mesh", "802.11s")
-	end
 
-	mode:value("ahdemo", translate("a_w_ahdemo"))
-	mode:value("monitor", translate("a_w_monitor"))
-	bssid:depends({mode="adhoc"})
+	-------------------- MAC80211 Interface ----------------------
 
-	s:taboption("advanced", Value, "frag", translate("wifi_frag"))
-	s:taboption("advanced", Value, "rts", translate("wifi_rts"))
-end
+	if hwtype == "mac80211" then
+		if fs.access("/usr/sbin/iw") then
+			mode:value("mesh", "802.11s")
+		end
 
+		mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
+		mode:value("monitor", translate("Monitor"))
+		bssid:depends({mode="adhoc"})
 
+		s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+		s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 
--------------------- Madwifi Interface ----------------------
+		mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
+		mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
 
-if hwtype == "atheros" then
-	mode:value("ahdemo", translate("a_w_ahdemo"))
-	mode:value("monitor", translate("a_w_monitor"))
-	mode:value("ap-wds", "%s (%s)" % {translate("a_w_ap"), translate("a_w_wds")})
-	mode:value("sta-wds", "%s (%s)" % {translate("a_w_client"), translate("a_w_wds")})
-
-	function mode.write(self, section, value)
-		if value == "ap-wds" then
-			ListValue.write(self, section, "ap")
-			m.uci:set("wireless", section, "wds", 1)
-		elseif value == "sta-wds" then
-			ListValue.write(self, section, "sta")
-			m.uci:set("wireless", section, "wds", 1)
-		else
-			ListValue.write(self, section, value)
-			m.uci:delete("wireless", section, "wds")
+		function mode.write(self, section, value)
+			if value == "ap-wds" then
+				ListValue.write(self, section, "ap")
+				m.uci:set("wireless", section, "wds", 1)
+			elseif value == "sta-wds" then
+				ListValue.write(self, section, "sta")
+				m.uci:set("wireless", section, "wds", 1)
+			else
+				ListValue.write(self, section, value)
+				m.uci:delete("wireless", section, "wds")
+			end
 		end
-	end
 
-	function mode.cfgvalue(self, section)
-		local mode = ListValue.cfgvalue(self, section)
-		local wds  = m.uci:get("wireless", section, "wds") == "1"
+		function mode.cfgvalue(self, section)
+			local mode = ListValue.cfgvalue(self, section)
+			local wds  = m.uci:get("wireless", section, "wds") == "1"
 
-		if mode == "ap" and wds then
-			return "ap-wds"
-		elseif mode == "sta" and wds then
-			return "sta-wds"
-		else
-			return mode
+			if mode == "ap" and wds then
+				return "ap-wds"
+			elseif mode == "sta" and wds then
+				return "sta-wds"
+			else
+				return mode
+			end
 		end
+
+		hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+		hidden:depends({mode="ap"})
+		hidden:depends({mode="ap-wds"})
 	end
 
-	bssid:depends({mode="adhoc"})
-	bssid:depends({mode="ahdemo"})
 
-	wdssep = s:taboption("advanced", Flag, "wdssep", translate("wifi_wdssep"))
-	wdssep:depends({mode="ap-wds"})
 
-	s:taboption("advanced", Flag, "doth", "802.11h")
-	hidden = s:taboption("general", Flag, "hidden", translate("wifi_hidden"))
-	hidden:depends({mode="ap"})
-	hidden:depends({mode="adhoc"})
-	hidden:depends({mode="ap-wds"})
-	hidden:depends({mode="sta-wds"})
-	isolate = s:taboption("advanced", Flag, "isolate", translate("wifi_isolate"),
-	 translate("wifi_isolate_desc"))
-	isolate:depends({mode="ap"})
-	s:taboption("advanced", Flag, "bgscan", translate("wifi_bgscan"))
+	-------------------- Madwifi Interface ----------------------
 
-	mp = s:taboption("macfilter", ListValue, "macpolicy", translate("wifi_macpolicy"))
-	mp:value("", translate("disable"))
-	mp:value("deny", translate("wifi_whitelist"))
-	mp:value("allow", translate("wifi_blacklist"))
-	ml = s:taboption("macfilter", DynamicList, "maclist", translate("wifi_maclist"))
-	ml:depends({macpolicy="allow"})
-	ml:depends({macpolicy="deny"})
-
-	s:taboption("advanced", Value, "rate", translate("wifi_rate"))
-	s:taboption("advanced", Value, "mcast_rate", translate("wifi_mcast_rate"))
-	s:taboption("advanced", Value, "frag", translate("wifi_frag"))
-	s:taboption("advanced", Value, "rts", translate("wifi_rts"))
-	s:taboption("advanced", Value, "minrate", translate("wifi_minrate"))
-	s:taboption("advanced", Value, "maxrate", translate("wifi_maxrate"))
-	s:taboption("advanced", Flag, "compression", translate("wifi_compression"))
-
-	s:taboption("advanced", Flag, "bursting", translate("wifi_bursting"))
-	s:taboption("advanced", Flag, "turbo", translate("wifi_turbo"))
-	s:taboption("advanced", Flag, "ff", translate("wifi_ff"))
-
-	s:taboption("advanced", Flag, "wmm", translate("wifi_wmm"))
-	s:taboption("advanced", Flag, "xr", translate("wifi_xr"))
-	s:taboption("advanced", Flag, "ar", translate("wifi_ar"))
-
-	local swm = s:taboption("advanced", Flag, "sw_merge", translate("wifi_nosbeacon"))
-	swm:depends({mode="adhoc"})
-
-	local nos = s:taboption("advanced", Flag, "nosbeacon", translate("wifi_nosbeacon"))
-	nos:depends({mode="sta"})
-	nos:depends({mode="sta-wds"})
-
-	local probereq = s:taboption("advanced", Flag, "probereq", translate("wifi_noprobereq"))
-	probereq.enabled  = "0"
-	probereq.disabled = "1"
-end
+	if hwtype == "atheros" then
+		mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
+		mode:value("monitor", translate("Monitor"))
+		mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
+		mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
+		mode:value("wds", translate("Static WDS"))
 
+		function mode.write(self, section, value)
+			if value == "ap-wds" then
+				ListValue.write(self, section, "ap")
+				m.uci:set("wireless", section, "wds", 1)
+			elseif value == "sta-wds" then
+				ListValue.write(self, section, "sta")
+				m.uci:set("wireless", section, "wds", 1)
+			else
+				ListValue.write(self, section, value)
+				m.uci:delete("wireless", section, "wds")
+			end
+		end
 
--------------------- Broadcom Interface ----------------------
+		function mode.cfgvalue(self, section)
+			local mode = ListValue.cfgvalue(self, section)
+			local wds  = m.uci:get("wireless", section, "wds") == "1"
 
-if hwtype == "broadcom" then
-	mode:value("wds", translate("a_w_wds"))
-	mode:value("monitor", translate("a_w_monitor"))
+			if mode == "ap" and wds then
+				return "ap-wds"
+			elseif mode == "sta" and wds then
+				return "sta-wds"
+			else
+				return mode
+			end
+		end
 
-	hidden = s:taboption("general", Flag, "hidden", translate("wifi_hidden"))
-	hidden:depends({mode="ap"})
-	hidden:depends({mode="adhoc"})
-	hidden:depends({mode="wds"})
+		bssid:depends({mode="adhoc"})
+		bssid:depends({mode="ahdemo"})
+		bssid:depends({mode="wds"})
+
+		wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
+		wdssep:depends({mode="ap-wds"})
+
+		s:taboption("advanced", Flag, "doth", "802.11h")
+		hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+		hidden:depends({mode="ap"})
+		hidden:depends({mode="adhoc"})
+		hidden:depends({mode="ap-wds"})
+		hidden:depends({mode="sta-wds"})
+		isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
+		 translate("Prevents client-to-client communication"))
+		isolate:depends({mode="ap"})
+		s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
+
+		mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
+		mp:value("", translate("disable"))
+		mp:value("deny", translate("Allow listed only"))
+		mp:value("allow", translate("Allow all except listed"))
+		ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
+		ml:depends({macpolicy="allow"})
+		ml:depends({macpolicy="deny"})
+
+		s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
+		s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
+		s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+		s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+		s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
+		s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
+		s:taboption("advanced", Flag, "compression", translate("Compression"))
+
+		s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
+		s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
+		s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
+
+		s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
+		s:taboption("advanced", Flag, "xr", translate("XR Support"))
+		s:taboption("advanced", Flag, "ar", translate("AR Support"))
+
+		local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
+		swm:depends({mode="adhoc"})
+
+		local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
+		nos:depends({mode="sta"})
+		nos:depends({mode="sta-wds"})
+
+		local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
+		probereq.enabled  = "0"
+		probereq.disabled = "1"
+	end
 
-	isolate = s:taboption("advanced", Flag, "isolate", translate("wifi_isolate"),
-	 translate("wifi_isolate_desc"))
-	isolate:depends({mode="ap"})
 
-	s:taboption("advanced", Flag, "doth", "802.11h")
-	s:taboption("advanced", Flag, "wmm", translate("wifi_wmm"))
+	-------------------- Broadcom Interface ----------------------
 
-	bssid:depends({mode="wds"})
-	bssid:depends({mode="adhoc"})
-end
+	if hwtype == "broadcom" then
+		mode:value("wds", translate("WDS"))
+		mode:value("monitor", translate("Monitor"))
 
+		hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+		hidden:depends({mode="ap"})
+		hidden:depends({mode="adhoc"})
+		hidden:depends({mode="wds"})
 
------------------------ HostAP Interface ---------------------
+		isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
+		 translate("Prevents client-to-client communication"))
+		isolate:depends({mode="ap"})
 
-if hwtype == "prism2" then
-	mode:value("wds", translate("a_w_wds"))
-	mode:value("monitor", translate("a_w_monitor"))
+		s:taboption("advanced", Flag, "doth", "802.11h")
+		s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
 
-	hidden = s:taboption("general", Flag, "hidden", translate("wifi_hidden"))
-	hidden:depends({mode="ap"})
-	hidden:depends({mode="adhoc"})
-	hidden:depends({mode="wds"})
+		bssid:depends({mode="wds"})
+		bssid:depends({mode="adhoc"})
+	end
 
-	bssid:depends({mode="sta"})
 
-	mp = s:taboption("macfilter", ListValue, "macpolicy", translate("wifi_macpolicy"))
-	mp:value("", translate("disable"))
-	mp:value("deny", translate("wifi_whitelist"))
-	mp:value("allow", translate("wifi_blacklist"))
-	ml = s:taboption("macfilter", DynamicList, "maclist", translate("wifi_maclist"))
-	ml:depends({macpolicy="allow"})
-	ml:depends({macpolicy="deny"})
-
-	s:taboption("advanced", Value, "rate", translate("wifi_rate"))
-	s:taboption("advanced", Value, "frag", translate("wifi_frag"))
-	s:taboption("advanced", Value, "rts", translate("wifi_rts"))
-end
+	----------------------- HostAP Interface ---------------------
+
+	if hwtype == "prism2" then
+		mode:value("wds", translate("WDS"))
+		mode:value("monitor", translate("Monitor"))
 
+		hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+		hidden:depends({mode="ap"})
+		hidden:depends({mode="adhoc"})
+		hidden:depends({mode="wds"})
 
-------------------- WiFI-Encryption -------------------
+		bssid:depends({mode="sta"})
 
-encr = s:taboption("encryption", ListValue, "encryption", translate("encryption"))
-encr.override_values = true
-encr:depends({mode="ap"})
-encr:depends({mode="sta"})
-encr:depends({mode="adhoc"})
-encr:depends({mode="ahdemo"})
-encr:depends({mode="ap-wds"})
-encr:depends({mode="sta-wds"})
-encr:depends({mode="mesh"})
+		mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
+		mp:value("", translate("disable"))
+		mp:value("deny", translate("Allow listed only"))
+		mp:value("allow", translate("Allow all except listed"))
+		ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
+		ml:depends({macpolicy="allow"})
+		ml:depends({macpolicy="deny"})
 
-encr:value("none", "No Encryption")
-encr:value("wep", "WEP")
+		s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
+		s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+		s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+	end
 
-if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
-	local supplicant = fs.access("/usr/sbin/wpa_supplicant")
-	local hostapd = fs.access("/usr/sbin/hostapd")
 
-	if hostapd and supplicant then
+	------------------- WiFI-Encryption -------------------
+
+	encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
+	encr.override_values = true
+	encr.override_depends = true
+	encr:depends({mode="ap"})
+	encr:depends({mode="sta"})
+	encr:depends({mode="adhoc"})
+	encr:depends({mode="ahdemo"})
+	encr:depends({mode="ap-wds"})
+	encr:depends({mode="sta-wds"})
+	encr:depends({mode="mesh"})
+
+	encr:value("none", "No Encryption")
+	encr:value("wep", "WEP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+
+	if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
+		local supplicant = fs.access("/usr/sbin/wpa_supplicant")
+		local hostapd = fs.access("/usr/sbin/hostapd")
+
+		if hostapd and supplicant then
+			encr:value("psk", "WPA-PSK")
+			encr:value("psk2", "WPA2-PSK")
+			encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode")
+			encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+			encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"})
+		elseif hostapd and not supplicant then
+			encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
+			encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
+			encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
+			encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
+			encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
+			encr.description = translate(
+				"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+				"and ad-hoc mode) to be installed."
+			)
+		elseif not hostapd and supplicant then
+			encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
+			encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
+			encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
+			encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
+			encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
+			encr.description = translate(
+				"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+				"and ad-hoc mode) to be installed."
+			)
+		else
+			encr.description = translate(
+				"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+				"and ad-hoc mode) to be installed."
+			)
+		end
+	elseif hwtype == "broadcom" then
 		encr:value("psk", "WPA-PSK")
 		encr:value("psk2", "WPA2-PSK")
-		encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode")
-		encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
-		encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"})
-	elseif hostapd and not supplicant then
-		encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
-		encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
-		encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
-		encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
-		encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
-		encr.description = translate("wifi_wpareq")
-	elseif not hostapd and supplicant then
-		encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
-		encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
-		encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
-		encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
-		encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
-		encr.description = translate("wifi_wpareq")
-	else
-		encr.description = translate("wifi_wpareq")
+		encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
 	end
-elseif hwtype == "broadcom" then
-	encr:value("psk", "WPA-PSK")
-	encr:value("psk2", "WPA2-PSK")
-	encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
-end
 
-encr:depends("mode", "ap")
-encr:depends("mode", "sta")
-encr:depends("mode", "ap-wds")
-encr:depends("mode", "sta-wds")
-encr:depends("mode", "wds")
-
-server = s:taboption("encryption", Value, "server", translate("a_w_radiussrv"))
-server:depends({mode="ap", encryption="wpa"})
-server:depends({mode="ap", encryption="wpa2"})
-server.rmempty = true
-
-port = s:taboption("encryption", Value, "port", translate("a_w_radiusport"))
-port:depends({mode="ap", encryption="wpa"})
-port:depends({mode="ap", encryption="wpa2"})
-port.rmempty = true
-
-key = s:taboption("encryption", Value, "key", translate("key"))
-key:depends("encryption", "wep")
-key:depends("encryption", "psk")
-key:depends("encryption", "psk2")
-key:depends("encryption", "psk+psk2")
-key:depends("encryption", "psk-mixed")
-key:depends({mode="ap", encryption="wpa"})
-key:depends({mode="ap", encryption="wpa2"})
-key.rmempty = true
-key.password = true
-
-if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
-	nasid = s:taboption("encryption", Value, "nasid", translate("a_w_nasid"))
-	nasid:depends({mode="ap", encryption="wpa"})
-	nasid:depends({mode="ap", encryption="wpa2"})
-	nasid.rmempty = true
-
-	eaptype = s:taboption("encryption", ListValue, "eap_type", translate("a_w_eaptype"))
-	eaptype:value("TLS")
-	eaptype:value("TTLS")
-	eaptype:value("PEAP")
-	eaptype:depends({mode="sta", encryption="wpa"})
-	eaptype:depends({mode="sta", encryption="wpa2"})
-
-	cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("a_w_cacert"))
-	cacert:depends({mode="sta", encryption="wpa"})
-	cacert:depends({mode="sta", encryption="wpa2"})
-
-	privkey = s:taboption("encryption", FileUpload, "priv_key", translate("a_w_tlsprivkey"))
-	privkey:depends({mode="sta", eap_type="TLS", encryption="wpa2"})
-	privkey:depends({mode="sta", eap_type="TLS", encryption="wpa"})
-
-	privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("a_w_tlsprivkeypwd"))
-	privkeypwd:depends({mode="sta", eap_type="TLS", encryption="wpa2"})
-	privkeypwd:depends({mode="sta", eap_type="TLS", encryption="wpa"})
-
-
-	auth = s:taboption("encryption", Value, "auth", translate("a_w_peapauth"))
-	auth:value("PAP")
-	auth:value("CHAP")
-	auth:value("MSCHAP")
-	auth:value("MSCHAPV2")
-	auth:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
-	auth:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
-	auth:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
-	auth:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
-
-
-	identity = s:taboption("encryption", Value, "identity", translate("a_w_peapidentity"))
-	identity:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
-	identity:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
-	identity:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
-	identity:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
-
-	password = s:taboption("encryption", Value, "password", translate("a_w_peappassword"))
-	password:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
-	password:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
-	password:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
-	password:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
+	encr:depends("mode", "ap")
+	encr:depends("mode", "sta")
+	encr:depends("mode", "ap-wds")
+	encr:depends("mode", "sta-wds")
+	encr:depends("mode", "wds")
+
+	server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
+	server:depends({mode="ap", encryption="wpa"})
+	server:depends({mode="ap", encryption="wpa2"})
+	server:depends({mode="ap-wds", encryption="wpa"})
+	server:depends({mode="ap-wds", encryption="wpa2"})
+	server.rmempty = true
+
+	port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
+	port:depends({mode="ap", encryption="wpa"})
+	port:depends({mode="ap", encryption="wpa2"})
+	port:depends({mode="ap-wds", encryption="wpa"})
+	port:depends({mode="ap-wds", encryption="wpa2"})
+	port.rmempty = true
+
+	key = s:taboption("encryption", Value, "key", translate("Key"))
+	key:depends("encryption", "wep")
+	key:depends("encryption", "psk")
+	key:depends("encryption", "psk2")
+	key:depends("encryption", "psk+psk2")
+	key:depends("encryption", "psk-mixed")
+	key:depends({mode="ap", encryption="wpa"})
+	key:depends({mode="ap", encryption="wpa2"})
+	key:depends({mode="ap-wds", encryption="wpa"})
+	key:depends({mode="ap-wds", encryption="wpa2"})
+	key.rmempty = true
+	key.password = true
+
+	if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
+		nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
+		nasid:depends({mode="ap", encryption="wpa"})
+		nasid:depends({mode="ap", encryption="wpa2"})
+		nasid:depends({mode="ap-wds", encryption="wpa"})
+		nasid:depends({mode="ap-wds", encryption="wpa2"})
+		nasid.rmempty = true
+
+		eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
+		eaptype:value("tls")
+		eaptype:value("ttls")
+		eaptype:value("peap")
+		eaptype:depends({mode="sta", encryption="wpa"})
+		eaptype:depends({mode="sta", encryption="wpa2"})
+
+		cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
+		cacert:depends({mode="sta", encryption="wpa"})
+		cacert:depends({mode="sta", encryption="wpa2"})
+
+		privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
+		privkey:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+		privkey:depends({mode="sta", eap_type="tls", encryption="wpa"})
+
+		privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
+		privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+		privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa"})
+
+
+		auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
+		auth:value("PAP")
+		auth:value("CHAP")
+		auth:value("MSCHAP")
+		auth:value("MSCHAPV2")
+		auth:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+		auth:depends({mode="sta", eap_type="peap", encryption="wpa"})
+		auth:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+		auth:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+
+
+		identity = s:taboption("encryption", Value, "identity", translate("Identity"))
+		identity:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+		identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
+		identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+		identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+
+		password = s:taboption("encryption", Value, "password", translate("Password"))
+		password:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+		password:depends({mode="sta", eap_type="peap", encryption="wpa"})
+		password:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+		password:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+	end
 end
 
-
 return m