X-Git-Url: https://git.archive.openwrt.org/?p=project%2Fluci.git;a=blobdiff_plain;f=modules%2Fadmin-full%2Fluasrc%2Fmodel%2Fcbi%2Fadmin_network%2Fwifi.lua;h=0cfc021764ab1db3e6df33db7f6303844ec25f18;hp=8aaf591b779aff8e919de5289d448e54980a47f7;hb=8feae0cba8454cba3b122d5351f2e2f336905134;hpb=dc672daf3bc08e5013b8b521004c71309887f803
diff --git a/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua b/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
index 8aaf591b7..0cfc02176 100644
--- a/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
+++ b/modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua
@@ -14,7 +14,6 @@ $Id$
local wa = require "luci.tools.webadmin"
local nw = require "luci.model.network"
-local ww = require "luci.model.wireless"
local fs = require "nixio.fs"
arg[1] = arg[1] or ""
@@ -28,26 +27,19 @@ m = Map("wireless", "",
m:chain("network")
-m.breadcrumb = {
- { luci.dispatcher.build_url("admin/network/wireless"), translate("Wireless Networks") }
-}
-
local ifsection
function m.on_commit(map)
- nw.init(map.uci)
- ww.init(map.uci)
-
- local wnet = ww:get_network(arg[2])
+ local wnet = nw:get_wifinet(arg[2])
if ifsection and wnet then
ifsection.section = wnet.sid
+ m.title = wnet:get_i18n()
end
end
nw.init(m.uci)
-ww.init(m.uci)
-local wnet = ww:get_network(arg[2])
+local wnet = nw:get_wifinet(arg[2])
-- redirect to overview page if network does not exist anymore (e.g. after a revert)
if not wnet then
@@ -55,19 +47,13 @@ if not wnet then
return
end
-m.title = ww:get_i18n(wnet)
+m.title = wnet:get_i18n()
-local iw = nil
-local tx_powers = nil
+local iw = luci.sys.wifi.getiwinfo(arg[1])
+local tx_powers = iw.txpwrlist or { }
+local hw_modes = iw.hwmodelist or { }
-m.uci:foreach("wireless", "wifi-iface",
- function(s)
- if s.device == arg[1] and not iw then
- iw = luci.sys.wifi.getiwinfo(s.ifname or s.device)
- tx_powers = iw.txpwrlist or { }
- end
- end)
s = m:section(NamedSection, arg[1], "wifi-device", translate("Device Configuration"))
s.addremove = false
@@ -82,7 +68,11 @@ back.value = ""
back.titleref = luci.dispatcher.build_url("admin", "network", "wireless")
]]
-en = s:taboption("general", Flag, "disabled", translate("enable"))
+st = s:taboption("general", DummyValue, "__status", translate("Status"))
+st.template = "admin_network/wifi_status"
+st.ifname = arg[2]
+
+en = s:taboption("general", Flag, "disabled", translate("Enable device"))
en.enabled = "0"
en.disabled = "1"
en.rmempty = false
@@ -91,16 +81,19 @@ function en.cfgvalue(self, section)
return Flag.cfgvalue(self, section) or "0"
end
-s:taboption("general", DummyValue, "type", translate("Type"))
local hwtype = m:get(arg[1], "type")
+local htcaps = m:get(arg[1], "ht_capab") and true or false
+
-- NanoFoo
local nsantenna = m:get(arg[1], "antenna")
ch = s:taboption("general", Value, "channel", translate("Channel"))
ch:value("auto", translate("auto"))
-for _, f in ipairs(luci.sys.wifi.channels()) do
- ch:value(f.channel, "%i (%.3f GHz)" %{ f.channel, f.mhz / 1000 })
+for _, f in ipairs(iw and iw.freqlist or luci.sys.wifi.channels()) do
+ if not f.restricted then
+ ch:value(f.channel, "%i (%.3f GHz)" %{ f.channel, f.mhz / 1000 })
+ end
end
@@ -112,32 +105,46 @@ if hwtype == "mac80211" then
"txpower", translate("Transmit Power"), "dBm")
tp.rmempty = true
- for _, p in ipairs(iw and iw.txpwrlist or {}) do
+ tp.default = tostring(iw and iw.txpower or tx_powers[#tx_powers])
+ for _, p in ipairs(tx_powers or {}) do
tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
end
-
+
mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
mode:value("", translate("auto"))
- mode:value("11b", "802.11b")
- mode:value("11g", "802.11g")
- mode:value("11a", "802.11a")
- mode:value("11ng", "802.11g+n")
- mode:value("11na", "802.11a+n")
-
- htmode = s:taboption("advanced", ListValue, "htmode", translate("HT mode"))
- htmode:depends("hwmode", "11na")
- htmode:depends("hwmode", "11ng")
- htmode:value("HT20", "20MHz")
- htmode:value("HT40-", translate("40MHz 2nd channel below"))
- htmode:value("HT40+", translate("40MHz 2nd channel above"))
-
- htcapab = s:taboption("advanced", DynamicList, "ht_capab", translate("HT capabilities"))
- htcapab:depends("hwmode", "11na")
- htcapab:depends("hwmode", "11ng")
-
- s:taboption("advanced", Value, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
+ if hw_modes.b then mode:value("11b", "802.11b") end
+ if hw_modes.g then mode:value("11g", "802.11g") end
+ if hw_modes.a then mode:value("11a", "802.11a") end
+
+ if htcaps then
+ if hw_modes.g and hw_modes.n then mode:value("11ng", "802.11g+n") end
+ if hw_modes.a and hw_modes.n then mode:value("11na", "802.11a+n") end
+
+ htmode = s:taboption("advanced", ListValue, "htmode", translate("HT mode"))
+ htmode:depends("hwmode", "11na")
+ htmode:depends("hwmode", "11ng")
+ htmode:value("HT20", "20MHz")
+ htmode:value("HT40-", translate("40MHz 2nd channel below"))
+ htmode:value("HT40+", translate("40MHz 2nd channel above"))
+
+ --htcapab = s:taboption("advanced", DynamicList, "ht_capab", translate("HT capabilities"))
+ --htcapab:depends("hwmode", "11na")
+ --htcapab:depends("hwmode", "11ng")
+ end
+
+ local cl = iw and iw.countrylist
+ if cl and #cl > 0 then
+ cc = s:taboption("advanced", ListValue, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
+ cc.default = tostring(iw and iw.country or "00")
+ for _, c in ipairs(cl) do
+ cc:value(c.alpha2, "%s - %s" %{ c.alpha2, c.name })
+ end
+ else
+ s:taboption("advanced", Value, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
+ end
+
s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
- translate("Distance to farthest network member in meters."))
+ translate("Distance to farthest network member in meters."))
end
@@ -155,12 +162,12 @@ if hwtype == "atheros" then
mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
mode:value("", translate("auto"))
- mode:value("11b", "802.11b")
- mode:value("11g", "802.11g")
- mode:value("11a", "802.11a")
- mode:value("11bg", "802.11b+g")
- mode:value("11gst", "802.11g + Turbo")
- mode:value("11ast", "802.11a + Turbo")
+ if hw_modes.b then mode:value("11b", "802.11b") end
+ if hw_modes.g then mode:value("11g", "802.11g") end
+ if hw_modes.a then mode:value("11a", "802.11a") end
+ if hw_modes.g then mode:value("11bg", "802.11b+g") end
+ if hw_modes.g then mode:value("11gst", "802.11g + Turbo") end
+ if hw_modes.a then mode:value("11ast", "802.11a + Turbo") end
mode:value("fh", translate("Frequency Hopping"))
s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
@@ -211,7 +218,13 @@ if hwtype == "broadcom" then
tp.rmempty = true
for _, p in ipairs(iw.txpwrlist) do
tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
- end
+ end
+
+ mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
+ mode:value("11bg", "802.11b+g")
+ mode:value("11b", "802.11b")
+ mode:value("11g", "802.11g")
+ mode:value("11gst", "802.11g + Turbo")
mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
mp:value("", translate("disable"))
@@ -259,393 +272,442 @@ end
----------------------- Interface -----------------------
-local wnet = ww:get_network(arg[2])
-
-if wnet then
- s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
- ifsection = s
- s.addremove = false
- s.anonymous = true
- s.defaults.device = arg[1]
-
- s:tab("general", translate("General Setup"))
- s:tab("encryption", translate("Wireless Security"))
- s:tab("macfilter", translate("MAC-Filter"))
- s:tab("advanced", translate("Advanced Settings"))
-
- s:taboption("general", Value, "ssid", translate("ESSID"))
-
- mode = s:taboption("general", ListValue, "mode", translate("Mode"))
- mode.override_values = true
- mode:value("ap", translate("Access Point"))
- mode:value("sta", translate("Client"))
- mode:value("adhoc", translate("Ad-Hoc"))
-
- bssid = s:taboption("general", Value, "bssid", translate("BSSID"))
-
- network = s:taboption("general", Value, "network", translate("Network"),
- translate("Choose the network you want to attach to this wireless interface. " ..
- "Select unspecified to not attach any network or fill out the " ..
- "create field to define a new network."))
-
- network.rmempty = true
- network.template = "cbi/network_netlist"
- network.widget = "radio"
-
- function network.write(self, section, value)
- local i = nw:get_interface(section)
- if i then
- if value == '-' then
- value = m:formvalue(self:cbid(section) .. ".newnet")
- if value and #value > 0 then
- local n = nw:add_network(value, {type="bridge", proto="none"})
- if n then n:add_interface(i) end
- else
- local n = i:get_network()
- if n then n:del_interface(i) end
- end
+s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
+ifsection = s
+s.addremove = false
+s.anonymous = true
+s.defaults.device = arg[1]
+
+s:tab("general", translate("General Setup"))
+s:tab("encryption", translate("Wireless Security"))
+s:tab("macfilter", translate("MAC-Filter"))
+s:tab("advanced", translate("Advanced Settings"))
+
+s:taboption("general", Value, "ssid", translate("ESSID"))
+
+mode = s:taboption("general", ListValue, "mode", translate("Mode"))
+mode.override_values = true
+mode:value("ap", translate("Access Point"))
+mode:value("sta", translate("Client"))
+mode:value("adhoc", translate("Ad-Hoc"))
+
+bssid = s:taboption("general", Value, "bssid", translate("BSSID"))
+
+network = s:taboption("general", Value, "network", translate("Network"),
+ translate("Choose the network you want to attach to this wireless interface. " ..
+ "Select unspecified to not attach any network or fill out the " ..
+ "create field to define a new network."))
+
+network.rmempty = true
+network.template = "cbi/network_netlist"
+network.widget = "radio"
+
+function network.write(self, section, value)
+ local i = nw:get_interface(section)
+ if i then
+ if value == '-' then
+ value = m:formvalue(self:cbid(section) .. ".newnet")
+ if value and #value > 0 then
+ local n = nw:add_network(value, {proto="none"})
+ if n then n:add_interface(i) end
else
- local n = nw:get_network(value)
- if n then
- n:type("bridge")
- n:add_interface(i)
- end
+ local n = i:get_network()
+ if n then n:del_interface(i) end
+ end
+ else
+ local n = nw:get_network(value)
+ if n then
+ n:type("bridge")
+ n:add_interface(i)
end
end
end
+end
- -------------------- MAC80211 Interface ----------------------
+-------------------- MAC80211 Interface ----------------------
- if hwtype == "mac80211" then
- if fs.access("/usr/sbin/iw") then
- mode:value("mesh", "802.11s")
- end
+if hwtype == "mac80211" then
+ if fs.access("/usr/sbin/iw") then
+ mode:value("mesh", "802.11s")
+ end
- mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
- mode:value("monitor", translate("Monitor"))
- bssid:depends({mode="adhoc"})
-
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
-
- mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
- mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
-
- function mode.write(self, section, value)
- if value == "ap-wds" then
- ListValue.write(self, section, "ap")
- m.uci:set("wireless", section, "wds", 1)
- elseif value == "sta-wds" then
- ListValue.write(self, section, "sta")
- m.uci:set("wireless", section, "wds", 1)
- else
- ListValue.write(self, section, value)
- m.uci:delete("wireless", section, "wds")
- end
+ mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
+ mode:value("monitor", translate("Monitor"))
+ bssid:depends({mode="adhoc"})
+
+ s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+
+ mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
+ mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
+
+ function mode.write(self, section, value)
+ if value == "ap-wds" then
+ ListValue.write(self, section, "ap")
+ m.uci:set("wireless", section, "wds", 1)
+ elseif value == "sta-wds" then
+ ListValue.write(self, section, "sta")
+ m.uci:set("wireless", section, "wds", 1)
+ else
+ ListValue.write(self, section, value)
+ m.uci:delete("wireless", section, "wds")
end
+ end
- function mode.cfgvalue(self, section)
- local mode = ListValue.cfgvalue(self, section)
- local wds = m.uci:get("wireless", section, "wds") == "1"
+ function mode.cfgvalue(self, section)
+ local mode = ListValue.cfgvalue(self, section)
+ local wds = m.uci:get("wireless", section, "wds") == "1"
- if mode == "ap" and wds then
- return "ap-wds"
- elseif mode == "sta" and wds then
- return "sta-wds"
- else
- return mode
- end
+ if mode == "ap" and wds then
+ return "ap-wds"
+ elseif mode == "sta" and wds then
+ return "sta-wds"
+ else
+ return mode
end
-
- hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="ap-wds"})
end
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="ap-wds"})
+end
- -------------------- Madwifi Interface ----------------------
- if hwtype == "atheros" then
- mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
- mode:value("monitor", translate("Monitor"))
- mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
- mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
- mode:value("wds", translate("Static WDS"))
+-------------------- Madwifi Interface ----------------------
- function mode.write(self, section, value)
- if value == "ap-wds" then
- ListValue.write(self, section, "ap")
- m.uci:set("wireless", section, "wds", 1)
- elseif value == "sta-wds" then
- ListValue.write(self, section, "sta")
- m.uci:set("wireless", section, "wds", 1)
- else
- ListValue.write(self, section, value)
- m.uci:delete("wireless", section, "wds")
- end
+if hwtype == "atheros" then
+ mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
+ mode:value("monitor", translate("Monitor"))
+ mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
+ mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
+ mode:value("wds", translate("Static WDS"))
+
+ function mode.write(self, section, value)
+ if value == "ap-wds" then
+ ListValue.write(self, section, "ap")
+ m.uci:set("wireless", section, "wds", 1)
+ elseif value == "sta-wds" then
+ ListValue.write(self, section, "sta")
+ m.uci:set("wireless", section, "wds", 1)
+ else
+ ListValue.write(self, section, value)
+ m.uci:delete("wireless", section, "wds")
end
+ end
- function mode.cfgvalue(self, section)
- local mode = ListValue.cfgvalue(self, section)
- local wds = m.uci:get("wireless", section, "wds") == "1"
+ function mode.cfgvalue(self, section)
+ local mode = ListValue.cfgvalue(self, section)
+ local wds = m.uci:get("wireless", section, "wds") == "1"
- if mode == "ap" and wds then
- return "ap-wds"
- elseif mode == "sta" and wds then
- return "sta-wds"
- else
- return mode
- end
+ if mode == "ap" and wds then
+ return "ap-wds"
+ elseif mode == "sta" and wds then
+ return "sta-wds"
+ else
+ return mode
end
-
- bssid:depends({mode="adhoc"})
- bssid:depends({mode="ahdemo"})
- bssid:depends({mode="wds"})
-
- wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
- wdssep:depends({mode="ap-wds"})
-
- s:taboption("advanced", Flag, "doth", "802.11h")
- hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="adhoc"})
- hidden:depends({mode="ap-wds"})
- hidden:depends({mode="sta-wds"})
- isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
- translate("Prevents client-to-client communication"))
- isolate:depends({mode="ap"})
- s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
-
- mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
- mp:value("", translate("disable"))
- mp:value("deny", translate("Allow listed only"))
- mp:value("allow", translate("Allow all except listed"))
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
- ml:depends({macpolicy="allow"})
- ml:depends({macpolicy="deny"})
-
- s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
- s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
- s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
- s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
- s:taboption("advanced", Flag, "compression", translate("Compression"))
-
- s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
- s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
- s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
-
- s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
- s:taboption("advanced", Flag, "xr", translate("XR Support"))
- s:taboption("advanced", Flag, "ar", translate("AR Support"))
-
- local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
- swm:depends({mode="adhoc"})
-
- local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
- nos:depends({mode="sta"})
- nos:depends({mode="sta-wds"})
-
- local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
- probereq.enabled = "0"
- probereq.disabled = "1"
end
+ bssid:depends({mode="adhoc"})
+ bssid:depends({mode="ahdemo"})
+ bssid:depends({mode="wds"})
+
+ wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
+ wdssep:depends({mode="ap-wds"})
+
+ s:taboption("advanced", Flag, "doth", "802.11h")
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="adhoc"})
+ hidden:depends({mode="ap-wds"})
+ hidden:depends({mode="sta-wds"})
+ isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
+ translate("Prevents client-to-client communication"))
+ isolate:depends({mode="ap"})
+ s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
+
+ mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
+ mp:value("", translate("disable"))
+ mp:value("deny", translate("Allow listed only"))
+ mp:value("allow", translate("Allow all except listed"))
+ ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
+ ml:depends({macpolicy="allow"})
+ ml:depends({macpolicy="deny"})
+
+ s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
+ s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
+ s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+ s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
+ s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
+ s:taboption("advanced", Flag, "compression", translate("Compression"))
+
+ s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
+ s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
+ s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
+
+ s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
+ s:taboption("advanced", Flag, "xr", translate("XR Support"))
+ s:taboption("advanced", Flag, "ar", translate("AR Support"))
+
+ local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
+ swm:depends({mode="adhoc"})
+
+ local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
+ nos:depends({mode="sta"})
+ nos:depends({mode="sta-wds"})
+
+ local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
+ probereq.enabled = "0"
+ probereq.disabled = "1"
+end
- -------------------- Broadcom Interface ----------------------
- if hwtype == "broadcom" then
- mode:value("wds", translate("WDS"))
- mode:value("monitor", translate("Monitor"))
+-------------------- Broadcom Interface ----------------------
- hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="adhoc"})
- hidden:depends({mode="wds"})
+if hwtype == "broadcom" then
+ mode:value("wds", translate("WDS"))
+ mode:value("monitor", translate("Monitor"))
- isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
- translate("Prevents client-to-client communication"))
- isolate:depends({mode="ap"})
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="adhoc"})
+ hidden:depends({mode="wds"})
- s:taboption("advanced", Flag, "doth", "802.11h")
- s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
+ isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
+ translate("Prevents client-to-client communication"))
+ isolate:depends({mode="ap"})
- bssid:depends({mode="wds"})
- bssid:depends({mode="adhoc"})
- end
+ s:taboption("advanced", Flag, "doth", "802.11h")
+ s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
+ bssid:depends({mode="wds"})
+ bssid:depends({mode="adhoc"})
+end
- ----------------------- HostAP Interface ---------------------
- if hwtype == "prism2" then
- mode:value("wds", translate("WDS"))
- mode:value("monitor", translate("Monitor"))
+----------------------- HostAP Interface ---------------------
- hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
- hidden:depends({mode="ap"})
- hidden:depends({mode="adhoc"})
- hidden:depends({mode="wds"})
+if hwtype == "prism2" then
+ mode:value("wds", translate("WDS"))
+ mode:value("monitor", translate("Monitor"))
- bssid:depends({mode="sta"})
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide ESSID"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="adhoc"})
+ hidden:depends({mode="wds"})
- mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
- mp:value("", translate("disable"))
- mp:value("deny", translate("Allow listed only"))
- mp:value("allow", translate("Allow all except listed"))
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
- ml:depends({macpolicy="allow"})
- ml:depends({macpolicy="deny"})
+ bssid:depends({mode="sta"})
- s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
- s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
- s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
- end
+ mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
+ mp:value("", translate("disable"))
+ mp:value("deny", translate("Allow listed only"))
+ mp:value("allow", translate("Allow all except listed"))
+ ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
+ ml:depends({macpolicy="allow"})
+ ml:depends({macpolicy="deny"})
+ s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
+ s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+end
- ------------------- WiFI-Encryption -------------------
-
- encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
- encr.override_values = true
- encr.override_depends = true
- encr:depends({mode="ap"})
- encr:depends({mode="sta"})
- encr:depends({mode="adhoc"})
- encr:depends({mode="ahdemo"})
- encr:depends({mode="ap-wds"})
- encr:depends({mode="sta-wds"})
- encr:depends({mode="mesh"})
-
- encr:value("none", "No Encryption")
- encr:value("wep", "WEP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
-
- if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
- local supplicant = fs.access("/usr/sbin/wpa_supplicant")
- local hostapd = fs.access("/usr/sbin/hostapd")
-
- if hostapd and supplicant then
- encr:value("psk", "WPA-PSK")
- encr:value("psk2", "WPA2-PSK")
- encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode")
- encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
- encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"})
- elseif hostapd and not supplicant then
- encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
- encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
- encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
- encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
- encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
- encr.description = translate(
- "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
- "and ad-hoc mode) to be installed."
- )
- elseif not hostapd and supplicant then
- encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
- encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
- encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
- encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
- encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
- encr.description = translate(
- "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
- "and ad-hoc mode) to be installed."
- )
- else
- encr.description = translate(
- "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
- "and ad-hoc mode) to be installed."
- )
- end
- elseif hwtype == "broadcom" then
+
+------------------- WiFI-Encryption -------------------
+
+encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
+encr.override_values = true
+encr.override_depends = true
+encr:depends({mode="ap"})
+encr:depends({mode="sta"})
+encr:depends({mode="adhoc"})
+encr:depends({mode="ahdemo"})
+encr:depends({mode="ap-wds"})
+encr:depends({mode="sta-wds"})
+encr:depends({mode="mesh"})
+
+encr:value("none", "No Encryption")
+encr:value("wep-open", translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+encr:value("wep-shared", translate("WEP Shared Key"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+
+if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
+ local supplicant = fs.access("/usr/sbin/wpa_supplicant")
+ local hostapd = fs.access("/usr/sbin/hostapd")
+
+ if hostapd and supplicant then
encr:value("psk", "WPA-PSK")
encr:value("psk2", "WPA2-PSK")
- encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
+ encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode")
+ encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
+ encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"})
+ elseif hostapd and not supplicant then
+ encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
+ encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
+ encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
+ encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
+ encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
+ elseif not hostapd and supplicant then
+ encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
+ encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
+ encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
+ encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
+ encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
+ else
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
+ end
+elseif hwtype == "broadcom" then
+ encr:value("psk", "WPA-PSK")
+ encr:value("psk2", "WPA2-PSK")
+ encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
+end
+
+encr:depends("mode", "ap")
+encr:depends("mode", "sta")
+encr:depends("mode", "ap-wds")
+encr:depends("mode", "sta-wds")
+encr:depends("mode", "wds")
+
+server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
+server:depends({mode="ap", encryption="wpa"})
+server:depends({mode="ap", encryption="wpa2"})
+server:depends({mode="ap-wds", encryption="wpa"})
+server:depends({mode="ap-wds", encryption="wpa2"})
+server.rmempty = true
+
+port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
+port:depends({mode="ap", encryption="wpa"})
+port:depends({mode="ap", encryption="wpa2"})
+port:depends({mode="ap-wds", encryption="wpa"})
+port:depends({mode="ap-wds", encryption="wpa2"})
+port.rmempty = true
+
+wpakey = s:taboption("encryption", Value, "_wpa_key", translate("Key"))
+wpakey:depends("encryption", "psk")
+wpakey:depends("encryption", "psk2")
+wpakey:depends("encryption", "psk+psk2")
+wpakey:depends("encryption", "psk-mixed")
+wpakey:depends({mode="ap", encryption="wpa"})
+wpakey:depends({mode="ap", encryption="wpa2"})
+wpakey:depends({mode="ap-wds", encryption="wpa"})
+wpakey:depends({mode="ap-wds", encryption="wpa2"})
+wpakey.datatype = "wpakey"
+wpakey.rmempty = true
+wpakey.password = true
+
+wpakey.cfgvalue = function(self, section, value)
+ local key = m.uci:get("wireless", section, "key")
+ if key == "1" or key == "2" or key == "3" or key == "4" then
+ return nil
+ end
+ return key
+end
+
+wpakey.write = function(self, section, value)
+ self.map.uci:set("wireless", section, "key", value)
+ self.map.uci:delete("wireless", section, "key1")
+end
+
+
+wepslot = s:taboption("encryption", ListValue, "_wep_key", translate("Used Key Slot"))
+wepslot:depends("encryption", "wep-open")
+wepslot:depends("encryption", "wep-shared")
+wepslot:value("1", translatef("Key #%d", 1))
+wepslot:value("2", translatef("Key #%d", 2))
+wepslot:value("3", translatef("Key #%d", 3))
+wepslot:value("4", translatef("Key #%d", 4))
+
+wepslot.cfgvalue = function(self, section)
+ local slot = tonumber(m.uci:get("wireless", section, "key"))
+ if not slot or slot < 1 or slot > 4 then
+ return 1
end
+ return slot
+end
+
+wepslot.write = function(self, section, value)
+ self.map.uci:set("wireless", section, "key", value)
+end
- encr:depends("mode", "ap")
- encr:depends("mode", "sta")
- encr:depends("mode", "ap-wds")
- encr:depends("mode", "sta-wds")
- encr:depends("mode", "wds")
-
- server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
- server:depends({mode="ap", encryption="wpa"})
- server:depends({mode="ap", encryption="wpa2"})
- server:depends({mode="ap-wds", encryption="wpa"})
- server:depends({mode="ap-wds", encryption="wpa2"})
- server.rmempty = true
-
- port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
- port:depends({mode="ap", encryption="wpa"})
- port:depends({mode="ap", encryption="wpa2"})
- port:depends({mode="ap-wds", encryption="wpa"})
- port:depends({mode="ap-wds", encryption="wpa2"})
- port.rmempty = true
-
- key = s:taboption("encryption", Value, "key", translate("Key"))
- key:depends("encryption", "wep")
- key:depends("encryption", "psk")
- key:depends("encryption", "psk2")
- key:depends("encryption", "psk+psk2")
- key:depends("encryption", "psk-mixed")
- key:depends({mode="ap", encryption="wpa"})
- key:depends({mode="ap", encryption="wpa2"})
- key:depends({mode="ap-wds", encryption="wpa"})
- key:depends({mode="ap-wds", encryption="wpa2"})
- key.rmempty = true
- key.password = true
-
- if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
- nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
- nasid:depends({mode="ap", encryption="wpa"})
- nasid:depends({mode="ap", encryption="wpa2"})
- nasid:depends({mode="ap-wds", encryption="wpa"})
- nasid:depends({mode="ap-wds", encryption="wpa2"})
- nasid.rmempty = true
-
- eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
- eaptype:value("TLS")
- eaptype:value("TTLS")
- eaptype:value("PEAP")
- eaptype:depends({mode="sta", encryption="wpa"})
- eaptype:depends({mode="sta", encryption="wpa2"})
-
- cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
- cacert:depends({mode="sta", encryption="wpa"})
- cacert:depends({mode="sta", encryption="wpa2"})
-
- privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
- privkey:depends({mode="sta", eap_type="TLS", encryption="wpa2"})
- privkey:depends({mode="sta", eap_type="TLS", encryption="wpa"})
-
- privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
- privkeypwd:depends({mode="sta", eap_type="TLS", encryption="wpa2"})
- privkeypwd:depends({mode="sta", eap_type="TLS", encryption="wpa"})
-
-
- auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
- auth:value("PAP")
- auth:value("CHAP")
- auth:value("MSCHAP")
- auth:value("MSCHAPV2")
- auth:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
- auth:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
- auth:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
- auth:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
-
-
- identity = s:taboption("encryption", Value, "identity", translate("Identity"))
- identity:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
- identity:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
- identity:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
- identity:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
-
- password = s:taboption("encryption", Value, "password", translate("Password"))
- password:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
- password:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
- password:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
- password:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
+local slot
+for slot=1,4 do
+ wepkey = s:taboption("encryption", Value, "key" .. slot, translatef("Key #%d", slot))
+ wepkey:depends("encryption", "wep-open")
+ wepkey:depends("encryption", "wep-shared")
+ wepkey.datatype = "wepkey"
+ wepkey.rmempty = true
+ wepkey.password = true
+
+ function wepkey.write(self, section, value)
+ if value and (#value == 5 or #value == 13) then
+ value = "s:" .. value
+ end
+ return Value.write(self, section, value)
end
end
+
+if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
+ nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
+ nasid:depends({mode="ap", encryption="wpa"})
+ nasid:depends({mode="ap", encryption="wpa2"})
+ nasid:depends({mode="ap-wds", encryption="wpa"})
+ nasid:depends({mode="ap-wds", encryption="wpa2"})
+ nasid.rmempty = true
+
+ eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
+ eaptype:value("tls", "TLS")
+ eaptype:value("ttls", "TTLS")
+ eaptype:value("peap", "PEAP")
+ eaptype:depends({mode="sta", encryption="wpa"})
+ eaptype:depends({mode="sta", encryption="wpa2"})
+
+ cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
+ cacert:depends({mode="sta", encryption="wpa"})
+ cacert:depends({mode="sta", encryption="wpa2"})
+
+ privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
+ privkey:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+ privkey:depends({mode="sta", eap_type="tls", encryption="wpa"})
+
+ privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
+ privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+ privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa"})
+
+
+ auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
+ auth:value("PAP")
+ auth:value("CHAP")
+ auth:value("MSCHAP")
+ auth:value("MSCHAPV2")
+ auth:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ auth:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ auth:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ auth:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+
+
+ identity = s:taboption("encryption", Value, "identity", translate("Identity"))
+ identity:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+
+ password = s:taboption("encryption", Value, "password", translate("Password"))
+ password:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ password:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ password:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ password:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+end
+
return m