"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2010-03-30 17:00+0200\n"
-"PO-Revision-Date: 2011-07-17 10:01+0200\n"
-"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
+"PO-Revision-Date: 2012-02-25 08:06+0200\n"
+"Last-Translator: Cye3s <cye3s.cy@gmail.com>\n"
"Language-Team: QQ Group 75543259 <axishero@foxmail.com>\n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Generator: Pootle 2.0.4\n"
-msgid "(optional)"
-msgstr "（可选）"
+msgid "%s%s with %s"
+msgstr ""
+
+msgid "(Unnamed Entry)"
+msgstr ""
+
+msgid "(Unnamed Rule)"
+msgstr ""
+
+msgid "(Unnamed SNAT)"
+msgstr ""
+
+msgid "-- Please choose --"
+msgstr ""
+
+msgid "-- custom --"
+msgstr ""
+
+msgid "<var>%d</var> pkts. per <var>%s</var>"
+msgstr ""
+
+msgid "<var>%d</var> pkts. per <var>%s</var>, burst <var>%d</var> pkts."
+msgstr ""
+
+msgid "<var>%s</var> and limit to %s"
+msgstr ""
+
+msgid "Accept forward"
+msgstr ""
+
+msgid "Accept input"
+msgstr ""
msgid "Action"
msgstr "动作"
-msgid "Advanced Options"
-msgstr "高级选项"
+msgid "Add"
+msgstr ""
-msgid "Advanced Rules"
-msgstr "高级规则"
+msgid "Add and edit..."
+msgstr ""
msgid "Advanced Settings"
msgstr "高级设置"
-msgid "Advanced rules let you customize the firewall to your needs. Only new connections will be matched. Packets belonging to already open connections are automatically allowed to pass the firewall."
-msgstr "高级规则允许按需定制防火墙。此规则只限制新建立的连接，对于已建立链路的数据包会自动允许通过。"
-
msgid "Allow forward from <em>source zones</em>:"
msgstr "允许从<em>source zones</em>转发"
msgid "Custom Rules"
msgstr "自定义规则"
-msgid "Custom Rules (/etc/firewall.user)"
-msgstr "自定义规则(/etc/firewall.user)"
+msgid ""
+"Custom rules allow you to execute arbritary iptables commands which are not "
+"otherwise covered by the firewall framework. The commands are executed after "
+"each firewall restart, right after the default ruleset has been loaded."
+msgstr ""
msgid "Destination"
msgstr "目标"
+msgid "Destination IP address"
+msgstr "目标IP地址"
+
msgid "Destination address"
msgstr "目标地址"
msgid "Destination zone"
msgstr "目标区域"
-msgid "Device"
-msgstr "设备"
+msgid "Disable"
+msgstr "禁用"
+
+msgid "Discard forward"
+msgstr ""
+
+msgid "Discard input"
+msgstr ""
+
+msgid "Do not rewrite"
+msgstr ""
+
+msgid "Do not track forward"
+msgstr "不要追踪转发"
+
+msgid "Do not track input"
+msgstr "不要追踪进入"
msgid "Drop invalid packets"
msgstr "丢弃无效数据包"
+msgid "Enable"
+msgstr "启用"
+
msgid "Enable NAT Loopback"
msgstr "启用NAT环回"
msgid "Enable logging on this zone"
msgstr "在此区域允许进入"
+msgid "External IP address"
+msgstr "外部IP地址"
+
msgid "External port"
msgstr "外部端口"
+msgid "Extra arguments"
+msgstr "附加参数"
+
msgid "Family"
msgstr "地址集合"
msgid "Firewall"
msgstr "防火墙"
+msgid "Firewall - Custom Rules"
+msgstr "防火墙 - 自定义规则"
+
+msgid "Firewall - Port Forwards"
+msgstr "防火墙 - 端口转发"
+
+msgid "Firewall - Traffic Rules"
+msgstr "防火墙 - 通讯规则"
+
msgid "Firewall - Zone Settings"
msgstr "防火墙-区域设置"
-msgid "For DNAT, match incoming traffic directed at the given destination ip address. For SNAT rewrite the source address to the given address."
-msgstr "DNAT：将目标地址转换为指定的IP地址；SNAT：将源地址转换为指定的IP地址。"
-
msgid "Force connection tracking"
msgstr "强制连接追踪"
msgid "Forward"
msgstr "转发"
+msgid "Forward to %s in %s"
+msgstr "转发到 %s 位于 %s"
+
+msgid "Forward to %s, %s in %s"
+msgstr "转发到 %s, %s 位于 %s"
+
+msgid "From %s in %s"
+msgstr "来自 %s 位于 %s"
+
+msgid "From %s in %s with source %s"
+msgstr "来自 %s 位于 %s 带源 %s"
+
+msgid "From %s in %s with source %s and %s"
+msgstr "来自 %s 位于 %s 带源 %s 并且 %s"
+
msgid "General Settings"
msgstr "标准设置"
+msgid "IP"
+msgstr "IP"
+
+msgid "IP range"
+msgstr "IP范围"
+
+msgid "IPs"
+msgstr ""
+
+msgid "IPv4"
+msgstr "IPv4"
+
msgid "IPv4 and IPv6"
msgstr "IPv4 和 IPv6"
msgid "IPv4 only"
msgstr "仅IPv4"
+msgid "IPv6"
+msgstr "IPv6"
+
msgid "IPv6 only"
-msgstr "仅IPv6 "
+msgstr "仅IPv6"
msgid "Input"
msgstr "入（路由器）"
-msgid "Intended destination address"
-msgstr "目标地址"
-
msgid "Inter-Zone Forwarding"
msgstr "端口触发"
msgid "Internal port"
msgstr "内部端口"
-msgid "Internal port (optional)"
-msgstr "内部端口（可选）"
+msgid "Internal zone"
+msgstr "内部区域"
msgid "Limit log messages"
msgstr "限制登陆信息"
+msgid "MAC"
+msgstr ""
+
+msgid "MACs"
+msgstr ""
+
msgid "MSS clamping"
msgstr "MSS钳制"
msgid "Match ICMP type"
msgstr "匹配ICMP类型"
-msgid "Match incoming traffic directed at the given destination port or port range on this host"
+msgid "Match forwarded traffic to the given destination port or port range."
+msgstr ""
+
+msgid ""
+"Match incoming traffic directed at the given destination port or port range "
+"on this host"
msgstr "在这个主机上，匹配输入的信息指向给定的端口或者范围"
-msgid "Match incoming traffic originating from the given source port or port range on the client host"
-msgstr "在客户端上，比较输入通道与给定的源端口是否一致。"
+msgid ""
+"Match incoming traffic originating from the given source port or port range "
+"on the client host."
+msgstr ""
msgid "Name"
msgstr "名字"
+msgid "New SNAT rule"
+msgstr "新建SNAT规则"
+
+msgid "New forward rule"
+msgstr "新建转发规则"
+
+msgid "New input rule"
+msgstr "新建进入规则"
+
+msgid "New port forward"
+msgstr "新建端口转发"
+
+msgid "New source NAT"
+msgstr "新建源NAT"
+
+msgid "Only match incoming traffic directed at the given IP address."
+msgstr ""
+
+msgid "Only match incoming traffic from these MACs."
+msgstr ""
+
+msgid "Only match incoming traffic from this IP or range."
+msgstr ""
+
+msgid ""
+"Only match incoming traffic originating from the given source port or port "
+"range on the client host"
+msgstr ""
+
+msgid "Open ports on router"
+msgstr ""
+
+msgid "Other..."
+msgstr "其它..."
+
msgid "Output"
msgstr "出（路由器）"
-msgid "Overview"
-msgstr "概览"
+msgid "Passes additional arguments to iptables. Use with care!"
+msgstr ""
-msgid "Port forwarding"
+msgid "Port Forwards"
msgstr "端口转发"
-msgid "Port forwarding allows to provide network services in the internal network to an external network."
-msgstr "端口转发-允许外部网络访问内部网络"
+msgid ""
+"Port forwarding allows remote computers on the Internet to connect to a "
+"specific computer or service within the private LAN."
+msgstr ""
msgid "Protocol"
msgstr "协议"
-msgid "Redirect matched incoming traffic to the given port on the internal host"
+msgid ""
+"Redirect matched incoming traffic to the given port on the internal host"
msgstr "重定向匹配到的入站流量至内部主机的指定端口"
msgid "Redirect matched incoming traffic to the specified internal host"
msgstr "重定向匹配到的入站流量至选定的内部主机"
-msgid "Redirection type"
-msgstr "重定向类型"
+msgid "Refuse forward"
+msgstr ""
-msgid "Redirections"
-msgstr "重定向"
+msgid "Refuse input"
+msgstr ""
msgid "Restrict Masquerading to given destination subnets"
msgstr "限制访问指定的目标子网"
msgid "Restrict to address family"
msgstr "限制地址"
-msgid "Rules"
-msgstr "规则"
+msgid "Rewrite matched traffic to the given address."
+msgstr ""
+
+msgid ""
+"Rewrite matched traffic to the given source port. May be left empty to only "
+"rewrite the IP address."
+msgstr ""
+
+msgid "Rewrite to source %s"
+msgstr ""
+
+msgid "Rewrite to source %s, %s"
+msgstr ""
+
+msgid "Rule is disabled"
+msgstr ""
+
+msgid "Rule is enabled"
+msgstr ""
+
+msgid "SNAT"
+msgstr ""
+
+msgid "SNAT IP address"
+msgstr ""
+
+msgid "SNAT port"
+msgstr ""
msgid "Source"
msgstr "源"
msgid "Source MAC address"
msgstr "源MAC地址"
+msgid "Source NAT"
+msgstr ""
+
+msgid ""
+"Source NAT is a specific form of masquerading which allows fine grained "
+"control over the source IP used for outgoing traffic, for example to map "
+"multiple WAN addresses to internal subnets."
+msgstr ""
+
msgid "Source address"
msgstr "源地址"
msgid "Source zone"
msgstr "源区域"
-msgid "The firewall creates zones over your network interfaces to control network traffic flow."
-msgstr "防火墙把网络接口分为不同的区域进行管理 "
+msgid ""
+"The firewall creates zones over your network interfaces to control network "
+"traffic flow."
+msgstr "防火墙把网络接口分为不同的区域进行管理"
-msgid "The options below control the forwarding policies between this zone (%s) and other zones. <em>Destination zones</em> cover forwarded traffic <strong>originating from %q</strong>. <em>Source zones</em> match forwarded traffic from other zones <strong>targeted at %q</strong>. The forwarding rule is <em>unidirectional</em>, e.g. a forward from lan to wan does <em>not</em> imply a permission to forward from wan to lan as well."
+msgid ""
+"The options below control the forwarding policies between this zone (%s) and "
+"other zones. <em>Destination zones</em> cover forwarded traffic "
+"<strong>originating from %q</strong>. <em>Source zones</em> match forwarded "
+"traffic from other zones <strong>targeted at %q</strong>. The forwarding "
+"rule is <em>unidirectional</em>, e.g. a forward from lan to wan does "
+"<em>not</em> imply a permission to forward from wan to lan as well."
msgstr "这个属性用来控制区域对区域的转发规则。"
-msgid "This section defines common properties of %q. The <em>input</em> and <em>output</em> options set the default policies for traffic entering and leaving this zone while the <em>forward</em> option describes the policy for forwarded traffic between different networks within the zone. <em>Covered networks</em> specifies which available networks are member of this zone."
-msgstr "本节定义 %q 的通用属性， <em>input</em> 和 <em>output</em>规则用于设置数据包“进”和“出”路由器（某个接口）默认的转发原则，<em>forward</em>规则用于特定（一个或多个）区域的不同子网之间的数据包转发而<em>Covered networks</em>是从属于这个区域的一个网络地址集合。"
+msgid ""
+"This page allows you to change advanced properties of the port forwarding "
+"entry. In most cases there is no need to modify those settings."
+msgstr ""
-msgid "Traffic Redirection"
-msgstr "流量重定向"
+msgid ""
+"This page allows you to change advanced properties of the traffic rule "
+"entry, such as matched source and destination hosts."
+msgstr ""
-msgid "Traffic redirection allows you to change the destination address of forwarded packets."
-msgstr "流量重定向允许你修改数据包转发地址"
+msgid ""
+"This section defines common properties of %q. The <em>input</em> and "
+"<em>output</em> options set the default policies for traffic entering and "
+"leaving this zone while the <em>forward</em> option describes the policy for "
+"forwarded traffic between different networks within the zone. <em>Covered "
+"networks</em> specifies which available networks are member of this zone."
+msgstr ""
+"本节定义 %q 的通用属性， <em>input</em> 和 <em>output</em>规则用于设置数据"
+"包“进”和“出”路由器（某个接口）默认的转发原则，<em>forward</em>规则用于特定"
+"（一个或多个）区域的不同子网之间的数据包转发而<em>Covered networks</em>是从属"
+"于这个区域的一个网络地址集合。"
+
+msgid "To %s"
+msgstr ""
+
+msgid "To %s at %s"
+msgstr ""
+
+msgid "To %s at %s on <var>this device</var>"
+msgstr ""
+
+msgid "To %s in %s"
+msgstr ""
+
+msgid "To %s on <var>this device</var>"
+msgstr ""
+
+msgid "To %s, %s in %s"
+msgstr ""
+
+msgid "To source IP"
+msgstr ""
+
+msgid "To source port"
+msgstr ""
+
+msgid "Traffic Rules"
+msgstr ""
+
+msgid ""
+"Traffic rules define policies for packets traveling between different zones, "
+"for example to reject traffic between certain hosts or to open WAN ports on "
+"the router."
+msgstr ""
msgid "Via"
msgstr "通过"
+msgid ""
+"You may specify multiple by selecting \"-- custom --\" and then entering "
+"protocols separated by space."
+msgstr ""
+
msgid "Zone %q"
msgstr "区域 %q"
msgid "any"
msgstr "任何"
+msgid "any host"
+msgstr ""
+
+msgid "any router IP"
+msgstr ""
+
+msgid "any zone"
+msgstr ""
+
+msgid "day"
+msgstr ""
+
+msgid "don't track"
+msgstr ""
+
msgid "drop"
msgstr "丢弃"
+msgid "hour"
+msgstr ""
+
+msgid "minute"
+msgstr ""
+
+msgid "not"
+msgstr ""
+
+msgid "port"
+msgstr ""
+
+msgid "ports"
+msgstr ""
+
msgid "reject"
msgstr "拒绝"
+msgid "second"
+msgstr ""
+
+msgid "type"
+msgstr ""
+
+msgid "types"
+msgstr ""
+
+#~ msgid "(optional)"
+#~ msgstr "（可选）"
+
+#~ msgid "Intended destination address"
+#~ msgstr "目标地址"
+
+#~ msgid "Internal port (optional)"
+#~ msgstr "内部端口（可选）"
+
+#~ msgid "Advanced Options"
+#~ msgstr "高级选项"
+
+#~ msgid "Advanced Rules"
+#~ msgstr "高级规则"
+
+#~ msgid ""
+#~ "Advanced rules let you customize the firewall to your needs. Only new "
+#~ "connections will be matched. Packets belonging to already open "
+#~ "connections are automatically allowed to pass the firewall."
+#~ msgstr ""
+#~ "高级规则允许按需定制防火墙。此规则只限制新建立的连接，对于已建立链路的数据"
+#~ "包会自动允许通过。"
+
+#~ msgid "Custom Rules (/etc/firewall.user)"
+#~ msgstr "自定义规则(/etc/firewall.user)"
+
+#~ msgid "Device"
+#~ msgstr "设备"
+
+#~ msgid ""
+#~ "For DNAT, match incoming traffic directed at the given destination ip "
+#~ "address. For SNAT rewrite the source address to the given address."
+#~ msgstr ""
+#~ "DNAT：将目标地址转换为指定的IP地址；SNAT：将源地址转换为指定的IP地址。"
+
+#~ msgid ""
+#~ "Match incoming traffic originating from the given source port or port "
+#~ "range on the client host"
+#~ msgstr "在客户端上，比较输入通道与给定的源端口是否一致。"
+
+#~ msgid "Overview"
+#~ msgstr "概览"
+
+#~ msgid "Port forwarding"
+#~ msgstr "端口转发"
+
+#~ msgid ""
+#~ "Port forwarding allows to provide network services in the internal "
+#~ "network to an external network."
+#~ msgstr "端口转发-允许外部网络访问内部网络"
+
+#~ msgid "Redirection type"
+#~ msgstr "重定向类型"
+
+#~ msgid "Redirections"
+#~ msgstr "重定向"
+
+#~ msgid "Rules"
+#~ msgstr "规则"
+
+#~ msgid "Traffic Redirection"
+#~ msgstr "流量重定向"
+
+#~ msgid ""
+#~ "Traffic redirection allows you to change the destination address of "
+#~ "forwarded packets."
+#~ msgstr "流量重定向允许你修改数据包转发地址"
+
#~ msgid "Zone"
#~ msgstr "区"
projects / project / luci.git / blobdiff