"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-12-21 23:08+0200\n"
-"PO-Revision-Date: 2011-09-28 11:52+0200\n"
+"PO-Revision-Date: 2012-04-08 14:29+0200\n"
"Last-Translator: phantasm131 <phantasm131@gmail.com>\n"
"Language-Team: QQ Group:75543259\n"
"Language: zh_CN\n"
msgid "<abbr title=\"Media Access Control\">MAC</abbr>-Address"
msgstr "<abbr title=\"Media Access Control\">MAC</abbr>-地址"
-msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
-msgstr "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-服务器"
-
msgid "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-Scan"
msgstr "<abbr title=\"Wireless Local Area Network\">WLAN</abbr>-搜索"
msgid "<abbr title=\"maximal\">Max.</abbr> concurrent queries"
msgstr "<abbr title=\"maximal\">最大</abbr>并发查询数"
-msgid "AHCP Settings"
-msgstr "AHCP设置"
+msgid "APN"
+msgstr "APN"
msgid "AR Support"
msgstr "AR支持"
-msgid "ARP ping retries"
-msgstr "重试ARP ping"
+msgid "ARP retry threshold"
+msgstr "ARP重试阈值"
msgid "ATM Bridges"
msgstr "ATM桥接"
-msgid "ATM Settings"
-msgstr "ATM设置"
-
msgid "ATM Virtual Channel Identifier (VCI)"
msgstr "ATM虚拟通道标识(VCI)"
"ATM bridges expose encapsulated ethernet in AAL5 connections as virtual "
"Linux network interfaces which can be used in conjunction with DHCP or PPP "
"to dial into the provider network."
-msgstr "ATM桥是以AAL5协议封装以太网的虚拟Linux网桥，用于协同DHCP或PPP来拨号连接到网络提供商。"
+msgstr ""
+"ATM桥是以AAL5协议封装以太网的虚拟Linux网桥，用于协同DHCP或PPP来拨号连接到网络"
+"提供商。"
msgid "ATM device number"
msgstr "ATM设备号码"
-msgid "Accept Router Advertisements"
-msgstr "接收路由公告"
+msgid "Accept router advertisements"
+msgstr "接收路由通告"
-msgid "Access Point"
-msgstr "接入点"
+msgid "Access Concentrator"
+msgstr "接入集中器"
-msgid "Access point (APN)"
-msgstr "接入点(APN)"
+msgid "Access Point"
+msgstr "接入点AP"
msgid "Action"
msgstr "动作"
msgid "Additional Hosts files"
msgstr "附加主机文件"
-msgid "Additional pppd options"
-msgstr "附加pppd选项"
-
msgid "Address"
msgstr "地址"
+msgid "Address to access local relay bridge"
+msgstr "接入本地中继桥的地址"
+
msgid "Administration"
-msgstr "管理界面"
+msgstr "管理权"
msgid "Advanced Settings"
msgstr "高级设置"
msgstr "通告的网络ID"
msgid "Alert"
-msgstr "警报"
+msgstr "Alert"
msgid "Allow <abbr title=\"Secure Shell\">SSH</abbr> password authentication"
msgstr "允许<abbr title=\"Secure Shell\">SSH</abbr>密码验证"
"Allow upstream responses in the 127.0.0.0/8 range, e.g. for RBL services"
msgstr "允许127.0.0.0/8回环范围内的上行响应，例如：RBL服务"
-msgid "Allowed range is 1 to FFFF"
-msgstr "允许范围：1 ~ FFFF"
+msgid "Allowed range is 1 to 65535"
+msgstr "允许范围:1~65535"
msgid "An additional network will be created if you leave this unchecked."
msgstr "放弃选中将会创建一个新网络。"
msgid "Antenna 2"
msgstr "天线 2"
+msgid "Any zone"
+msgstr "任意区域"
+
msgid "Apply"
msgstr "应用"
msgid "Authorization Required"
msgstr "需要授权"
-msgid "Automatic Disconnect"
-msgstr "自动断开"
+msgid "Auto Refresh"
+msgstr "自动刷新"
msgid "Available"
msgstr "可用"
msgid "Back to Overview"
msgstr "返回至概况"
+msgid "Back to configuration"
+msgstr "返回至配置"
+
msgid "Back to overview"
msgstr "返回至概况"
msgid "Background Scan"
msgstr "后台扫描"
+msgid "Backup / Flash Firmware"
+msgstr "备份/升级"
+
msgid "Backup / Restore"
msgstr "备份/恢复"
-msgid "Backup Archive"
-msgstr "备份的存档"
+msgid "Backup file list"
+msgstr "备份文件列表"
msgid "Bad address specified!"
msgstr "指定了错误的地址！"
+msgid ""
+"Below is the determined list of files to backup. It consists of changed "
+"configuration files marked by opkg, essential base files and the user "
+"defined backup patterns."
+msgstr ""
+"下面是待备份的文件清单。包含了更改的配置文件、必要的基础文件和用户自定义的备"
+"份文件。"
+
msgid "Bit Rate"
msgstr "传输速率"
msgid "Bitrate"
msgstr "传输速率"
+msgid "Bogus NX Domain Override"
+msgstr "伪造的NX Domain重载"
+
msgid "Bridge"
msgstr "桥接"
msgstr "检查"
msgid "Checksum"
-msgstr "校验"
+msgstr "校验值"
msgid ""
"Choose the firewall zone you want to assign to this interface. Select "
"选择连接到此无线接口的网络。选中<em>未指定</em>不连接到任何网络；或者填写<em>"
"创建</em>栏以新建一个网络。"
+msgid "Cipher"
+msgstr "算法"
+
+msgid ""
+"Click \"Generate archive\" to download a tar archive of the current "
+"configuration files. To reset the firmware to its initial state, click "
+"\"Perform reset\" (only possible with squashfs images)."
+msgstr ""
+"点击\"生成备份\"即可下载以tar存档的当前配置文件。点击\"执行复位\"可恢复路由到"
+"初始的默认配置状态(仅squashfs格式的固件有效)。"
+
msgid "Client"
-msgstr "客户端"
+msgstr "客户端Client"
+
+msgid "Client ID to send when requesting DHCP"
+msgstr "请求DHCP时发送的客户ID"
+
+msgid ""
+"Close inactive connection after the given amount of seconds, use 0 to "
+"persist connection"
+msgstr "在给定的时间后自动关闭非活动链接(秒)，值0为持续连接"
+
+msgid "Close list..."
+msgstr "关闭列表..."
msgid "Collecting data..."
msgstr "收集信息中..."
msgstr "设置已应用。"
msgid "Configuration files will be kept."
-msgstr "配置文件将被保存。"
-
-msgid ""
-"Configure the local DNS server to use the name servers adverticed by the PPP "
-"peer"
-msgstr "本地DNS服务器使用PPP端局提供的域名服务器"
+msgstr "配置文件将被保留。"
msgid "Configures this mount as overlay storage for block-extroot"
msgstr "对于block-extroot则设置挂载到overlay存储"
msgid "Connect"
msgstr "连接"
-msgid "Connect script"
-msgstr "连接脚本"
-
msgid "Connected"
msgstr "已连接"
msgid "Connection Limit"
-msgstr "连接受限"
+msgstr "连接数限制"
+
+msgid "Connections"
+msgstr "链接"
msgid "Country"
msgstr "国家"
msgid "Create a bridge over multiple interfaces"
msgstr "在多个接口间创建网桥"
-msgid "Create backup"
-msgstr "创建备份"
-
msgid "Critical"
-msgstr "紧要"
+msgstr "Critical"
msgid "Cron Log Level"
msgstr "Cron日志级别"
-msgid "Custom Files"
-msgstr "自定义文件"
-
msgid "Custom Interface"
msgstr "自定义接口"
-msgid "Custom files"
-msgstr "自定义文件"
-
msgid ""
"Customizes the behaviour of the device <abbr title=\"Light Emitting Diode"
"\">LED</abbr>s if possible."
msgid "DHCP and DNS"
msgstr "DHCP/DNS"
+msgid "DHCP client"
+msgstr "DHCP客户端"
+
msgid "DHCP-Options"
msgstr "DHCP-选项"
msgstr "DNS转发"
msgid "Debug"
-msgstr "调试"
+msgstr "Debug"
+
+msgid "Default %d"
+msgstr "默认%d"
-msgid "Default"
-msgstr "默认"
+msgid "Default gateway"
+msgstr "默认网关"
msgid "Default state"
msgstr "默认状态"
msgid "Destination"
msgstr "目的地址"
-msgid "Detected Files"
-msgstr "查询到的文件"
-
-msgid "Detected files"
-msgstr "查询到的文件"
-
msgid "Device"
msgstr "设备"
msgstr "设备配置"
msgid "Diagnostics"
-msgstr "诊断"
+msgstr "网络诊断"
msgid "Directory"
msgstr "目录"
msgid ""
"Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for "
"this interface."
-msgstr "禁用本接口的<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>。"
+msgstr ""
+"禁用本接口的<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>。"
msgid "Disable DNS setup"
msgstr "禁用DNS设置"
msgid "Discard upstream RFC1918 responses"
msgstr "丢弃RFC1918上行响应数据"
-msgid "Disconnect script"
-msgstr "断开脚本"
+msgid "Displaying only packages containing"
+msgstr "只显示内含软件包"
msgid "Distance Optimization"
msgstr "距离优化"
msgid "Distance to farthest network member in meters."
-msgstr "最远客户端的距离,单位:米。"
+msgstr "最远客户端的距离(米)。"
msgid "Diversity"
msgstr "分集"
msgstr "不缓存错误的应答，例如不存在的域名"
msgid "Do not forward requests that cannot be answered by public name servers"
-msgstr "不转发公共域名服务器无法回ç\94ç\9a\84请æ±\82"
+msgstr "不转发公共域名服务器无法回åº\94ç\9a\84请æ±\82"
msgid "Do not forward reverse lookups for local networks"
msgstr "不查找本地网络"
msgid "Download and install package"
msgstr "下载并安装软件包"
+msgid "Download backup"
+msgstr "下载备份"
+
msgid "Dropbear Instance"
msgstr "Dropbear实例"
msgid "Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
msgstr "动态<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"
+msgid "Dynamic tunnel"
+msgstr "动态隧道"
+
msgid ""
"Dynamically allocate DHCP addresses for clients. If disabled, only clients "
"having static leases will be served."
msgid "Edit"
msgstr "修改"
-msgid "Edit package lists and installation targets"
-msgstr "修改软件包的同步源和安装地址"
-
msgid "Edit this interface"
msgstr "修改此接口"
msgstr "修改此网络"
msgid "Emergency"
-msgstr "紧急"
+msgstr "Emergency"
msgid "Enable"
msgstr "启用"
-msgid "Enable 4K VLANs"
-msgstr "开启4K VLAN"
-
msgid "Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"
msgstr "开启<abbr title=\"Spanning Tree Protocol\">STP</abbr>"
-msgid "Enable IPv6 on PPP link"
-msgstr "在PPP链路上启用IPv6"
+msgid "Enable HE.net dynamic endpoint update"
+msgstr "开启HE.net动态终端更新"
+
+msgid "Enable IPv6 negotiation on the PPP link"
+msgstr "在PPP链路上开启IPv6协商"
msgid "Enable Jumbo Frame passthrough"
msgstr "开启巨桢直通"
msgid "Enable VLAN functionality"
msgstr "开启VLAN功能"
+msgid "Enable buffering"
+msgstr "开启缓冲"
+
+msgid "Enable builtin NTP server"
+msgstr "开启内置NTP服务器"
+
msgid "Enable learning and aging"
msgstr "开启learning和aging"
msgid "Encryption"
msgstr "加密"
+msgid "Erasing..."
+msgstr "删除中..."
+
msgid "Error"
-msgstr "错误"
+msgstr "Error"
msgid "Ethernet Adapter"
msgstr "以太网适配器"
msgid "Filename of the boot image advertised to clients"
msgstr "向客户端通告的启动镜像文件名"
-msgid "Files to be kept when flashing a new firmware"
-msgstr "更新固件时被保存的文件"
-
msgid "Filesystem"
msgstr "文件系统"
msgid "Firmware Version"
msgstr "固件版本"
-msgid "Firmware image"
-msgstr "固件文件"
-
msgid "Fixed source port for outbound DNS queries"
msgstr "固定出站DNS查询的源端口"
msgid "Flash Firmware"
msgstr "升级固件"
+msgid "Flash image..."
+msgstr "刷新固件..."
+
+msgid "Flash new firmware image"
+msgstr "刷新固件"
+
+msgid "Flash operations"
+msgstr "刷新操作"
+
+msgid "Flashing..."
+msgstr "刷新中..."
+
msgid "Force"
msgstr "强制"
+msgid "Force CCMP (AES)"
+msgstr "强制CCMP (AES)"
+
msgid "Force DHCP on this network even if another server is detected."
msgstr "在本网络探测到有其他DHCP服务器的情况下也强制启动DHCP。"
-msgid "Forward DHCP"
-msgstr "转发DHCP"
+msgid "Force TKIP"
+msgstr "强制TKIP"
+
+msgid "Force TKIP and CCMP (AES)"
+msgstr "强制TKIP & CCMP (AES)"
-msgid "Forward broadcasts"
-msgstr "转发广播"
+msgid "Forward DHCP traffic"
+msgstr "转发DHCP数据包"
+
+msgid "Forward broadcast traffic"
+msgstr "转发广播数据包"
msgid "Forwarding mode"
msgstr "转发模式"
msgid "Gateway ports"
msgstr "网关端口"
-msgid "General"
-msgstr "基本信息"
-
msgid "General Settings"
msgstr "基本设置"
msgid "General Setup"
msgstr "基本设置"
+msgid "Generate archive"
+msgstr "生成备份"
+
msgid "Given password confirmation did not match, password not changed!"
msgstr "输入的确认密码不匹配，密码未更改！"
+msgid "Go to password configuration..."
+msgstr "跳转到密码配置页..."
+
msgid "Go to relevant configuration page"
msgstr "转到相关配置页"
-msgid "HE.net Tunnel ID"
-msgstr "HE.net隧道ID"
+msgid "HE.net password"
+msgstr "HE.net密码"
+
+msgid "HE.net user ID"
+msgstr "HE.net用户ID"
msgid "HT capabilities"
msgstr "HT功能"
msgstr "挂起"
msgid ""
-"Here you can backup and restore your router configuration and - if possible "
-"- reset the router to the default settings."
-msgstr "这里可以备份和恢复路由器的配置，也可以恢复到系统出厂设置。"
-
-msgid ""
"Here you can configure the basic aspects of your device like its hostname or "
"the timezone."
msgstr "这里可以配置路由器的部分基本信息，比如主机名和时区。"
msgid ""
-"Here you can customize the settings and the functionality of <abbr title="
-"\"Lua Configuration Interface\">LuCI</abbr>."
-msgstr ""
-"这里可以自定义<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的组件和"
-"功能。"
-
-msgid ""
"Here you can paste public SSH-Keys (one per line) for SSH public-key "
"authentication."
msgstr "这里可以粘贴公用SSH密钥以用于SSH公共密钥认证(每行一个密钥)。"
msgid "Hostname"
msgstr "主机名"
+msgid "Hostname to send when requesting DHCP"
+msgstr "请求DHCP时发送的主机名"
+
msgid "Hostnames"
msgstr "主机名"
msgid "IPv4 WAN Status"
msgstr "IPv4 WAN状态"
+msgid "IPv4 address"
+msgstr "IPv4地址"
+
msgid "IPv4 and IPv6"
msgstr "IPv4和IPv6"
+msgid "IPv4 broadcast"
+msgstr "IPv4广播"
+
+msgid "IPv4 gateway"
+msgstr "IPv4网关"
+
+msgid "IPv4 netmask"
+msgstr "IPv4子网掩码"
+
msgid "IPv4 only"
msgstr "仅IPv4"
msgid "IPv6 WAN Status"
msgstr "IPv6 WAN状态"
+msgid "IPv6 address"
+msgstr "IPv6地址"
+
+msgid "IPv6 gateway"
+msgstr "IPv6网关"
+
msgid "IPv6 only"
msgstr "仅IPv6"
+msgid "IPv6-in-IPv4 (RFC4213)"
+msgstr "IPv6-in-IPv4 (RFC4213)"
+
+msgid "IPv6-over-IPv4"
+msgstr "IPv6-over-IPv4"
+
msgid "Identity"
msgstr "鉴权"
"device node"
msgstr "如果设备指定了卷标，则用其来挂载设备"
+msgid "If unchecked, no default route is configured"
+msgstr "如果未选中，则不配置默认路由"
+
+msgid "If unchecked, the advertised DNS server addresses are ignored"
+msgstr "如果未选中，则忽略所通告的DNS服务器地址"
+
msgid ""
"If your physical memory is insufficient unused data can be temporarily "
"swapped to a swap-device resulting in a higher amount of usable <abbr title="
"slow process as the swap-device cannot be accessed with the high datarates "
"of the <abbr title=\"Random Access Memory\">RAM</abbr>."
msgstr ""
-"如果物理内存不足，暂时不用的数据可以交换到swap设备暂存，以得到更多的可用内存<abbr title=\"Random Access "
-"Memory\">RAM</abbr>。但是访问swap设备比访问内存<abbr title=\"Random Access "
-"Memory\">RAM</abbr>的速度慢。"
+"如果物理内存不足，暂时不用的数据可以交换到swap设备暂存，以得到更多的可用内存"
+"<abbr title=\"Random Access Memory\">RAM</abbr>。但是访问swap设备比访问内存"
+"<abbr title=\"Random Access Memory\">RAM</abbr>的速度慢。"
msgid "Ignore Hosts files"
msgstr "忽略主机文件"
msgid "Ignore resolve file"
msgstr "忽略解析文件"
+msgid "Image"
+msgstr "映像文件"
+
msgid "In"
msgstr "入口"
+msgid "Inactivity timeout"
+msgstr "活动超时"
+
msgid "Inbound:"
msgstr "入站:"
msgid "Info"
-msgstr "信息"
+msgstr "Info"
msgid "Initscript"
msgstr "启动脚本"
msgid "Install"
msgstr "安装"
-msgid "Installation targets"
-msgstr "安装位置"
+msgid "Install package %q"
+msgstr "安装软件包%q"
+
+msgid "Install protocol extensions..."
+msgstr "安装协议扩展..."
msgid "Installed packages"
msgstr "已安装软件包"
msgid "Invalid VLAN ID given! Only IDs between %d and %d are allowed."
msgstr "无效的VLAN ID！只允许 %d 至 %d 之间。"
+msgid "Invalid VLAN ID given! Only unique IDs are allowed"
+msgstr "无效的VLAN ID！禁止重复的ID"
+
msgid "Invalid username and/or password! Please try again."
msgstr "用户名或密码错误！请重试。"
msgid "Join Network: Wireless Scan"
msgstr "加入网络:搜索无线"
-msgid "Keep configuration files"
-msgstr "保留配置文件"
-
-msgid "Keep-Alive"
-msgstr "保持活动"
-
-msgid "Kernel"
-msgstr "内核"
+msgid "Keep settings"
+msgstr "保留配置"
msgid "Kernel Log"
msgstr "内核日志"
msgid "Kill"
msgstr "强制清理"
+msgid "LCP echo failure threshold"
+msgstr "LCP响应故障阈值"
+
+msgid "LCP echo interval"
+msgstr "LCP响应间隔"
+
msgid "LLC"
msgstr "逻辑链路控制LLC"
msgid "Leasetime remaining"
msgstr "租约剩余"
-msgid "Legend:"
-msgstr "图例："
-
-msgid ""
-"Let pppd replace the current default route to use the PPP interface after "
-"successful connect"
-msgstr "PPP连接成功后替换当前默认路由为pppd"
+msgid "Leave empty to autodetect"
+msgstr "留空则自动探测"
-msgid "Let pppd run this script after establishing the PPP link"
-msgstr "PPP连接建立后运行此脚本"
+msgid "Leave empty to use the current WAN address"
+msgstr "留空则使用当前WAN地址"
-msgid "Let pppd run this script before tearing down the PPP link"
-msgstr "PPP连接断开前运行此脚本"
+msgid "Legend:"
+msgstr "图例："
msgid "Limit"
msgstr "限制"
msgid "List of domains to allow RFC1918 responses for"
msgstr "允许RFC1918响应的域名表"
+msgid "List of hosts that supply bogus NX domain results"
+msgstr "提供伪造NX domain结果的主机列表"
+
msgid "Listen only on the given interface or, if unspecified, on all"
msgstr "监听指定的接口；若未指定则监听全部"
msgid "Loading"
msgstr "载入中"
+msgid "Local IPv4 address"
+msgstr "本地IPv4地址"
+
+msgid "Local IPv6 address"
+msgstr "本地IPv6地址"
+
msgid "Local Startup"
msgstr "本地启动脚本"
msgid "Localise queries"
msgstr "本地化查询"
+msgid "Locked to channel %d used by %s"
+msgstr "%s的隧道锁定到%d"
+
msgid "Log output level"
msgstr "日志记录等级"
msgid "MTU"
msgstr "MTU"
-msgid ""
-"Make sure that you provide the correct pin code here or you might lock your "
-"sim card!"
-msgstr "请确认pin码正确，并且没有锁定sim卡！"
-
msgid "Maximum Rate"
msgstr "最高速率"
msgid "Maximum allowed size of EDNS.0 UDP packets"
msgstr "允许的最大EDNS.0 UDP报文大小"
+msgid "Maximum amount of seconds to wait for the modem to become ready"
+msgstr "modem就绪的最大等待时间(秒)"
+
msgid "Maximum hold time"
msgstr "最大持续时间"
msgid "Minimum hold time"
msgstr "最低保持时间"
+msgid "Missing protocol extension for proto %q"
+msgstr "缺少协议%q的协议扩展"
+
msgid "Mode"
msgstr "模式"
msgid "Modem device"
msgstr "Modem设备"
-msgid "Monitor"
-msgstr "监听"
+msgid "Modem init timeout"
+msgstr "modem初始化超时"
-msgid ""
-"Most of them are network servers, that offer a certain service for your "
-"device or network like shell access, serving webpages like <abbr title=\"Lua "
-"Configuration Interface\">LuCI</abbr>, doing mesh routing, sending e-"
-"mails, ..."
-msgstr ""
-"这些大部分是为设备或网络提供特定服务的，比如shell访问，<abbr title=\"Lua Configuration "
-"Interface\">LuCI</abbr> App，网间漫游，发送E-mail等..."
+msgid "Monitor"
+msgstr "监听Monitor"
msgid "Mount Entry"
msgstr "挂载项"
msgid "NAS ID"
msgstr "NAS ID"
+msgid "NTP server candidates"
+msgstr "候选NTP服务器"
+
msgid "Name"
msgstr "名称"
msgid "No network configured on this device"
msgstr "本设备未配置网络"
+msgid "No network name specified"
+msgstr "未指定网络名"
+
+msgid "No package lists available"
+msgstr "无可用软件列表"
+
msgid "No password set!"
msgstr "未设置密码！"
msgstr "无"
msgid "Normal"
-msgstr "正常"
+msgstr "Normal"
msgid "Not associated"
msgstr "未关联"
+msgid "Not connected"
+msgstr "未连接"
+
msgid "Note: Configuration files will be erased."
msgstr "注意：配置文件将被删除。"
msgstr "注意：如果此处选择的接口从属于另一个网络，那将会迁入那个网络。"
msgid "Notice"
-msgstr "注意"
-
-msgid "Number of failed connection tests to initiate automatic reconnect"
-msgstr "启动自动重连的失败连接次数"
+msgstr "Notice"
msgid "OK"
msgstr "OK"
"<samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: "
"<samp>eth0.1</samp>)."
msgstr ""
-"本页可配置网络接口。选中\"桥接接口\"可把几个接口组合配置成网桥，自定义添加的多个接口名须用空格隔开，也可用 <abbr title=\"Virtual "
-"
Local Area Network\">VLAN</abbr> 来标记<samp>INTERFACE.VLANNR</samp> 。(<abbr "
+"本页可配置网络接口。选中\"桥接接口\"可把几个接口组合配置成网桥，自定义添加的多个接口名须用空格隔开，也可用<samp>INTERFACE.VLANNR<"
+"
/samp>来标记<abbr title=\"Virtual Local Area Network\">VLAN</abbr>。(<abbr "
"title=\"for example\">例如</abbr>:<samp>eth0.1</samp>)。"
msgid "On-State Delay"
msgid "Open"
msgstr "开启"
+msgid "Open list..."
+msgstr "打开列表..."
+
msgid "Option changed"
msgstr "修改的选项"
msgid "Outdoor Channels"
msgstr "户外信道"
-msgid "Override Gateway"
+msgid "Override MAC address"
+msgstr "更新MAC地址"
+
+msgid "Override MTU"
+msgstr "更新MTU"
+
+msgid "Override the gateway in DHCP responses"
msgstr "更新网关"
msgid ""
"subnet that is served."
msgstr "更新发送给客户端的子网掩码。这通常由子网算出。"
+msgid "Override the table used for internal routes"
+msgstr "更新内部路由表"
+
msgid "Overview"
msgstr "总览"
msgid "Owner"
msgstr "所有者"
+msgid "PAP/CHAP password"
+msgstr "PAP/CHAP密码"
+
+msgid "PAP/CHAP username"
+msgstr "PAP/CHAP用户名"
+
msgid "PID"
msgstr "PID"
-msgid "PIN code"
-msgstr "PIN码"
+msgid "PIN"
+msgstr "PIN"
-msgid "PPP Settings"
-msgstr "PPP设置"
+msgid "PPP"
+msgstr "PPP"
msgid "PPPoA Encapsulation"
msgstr "PPPoA封包"
+msgid "PPPoATM"
+msgstr "PPPoATM"
+
+msgid "PPPoE"
+msgstr "PPPoE"
+
+msgid "PPtP"
+msgstr "PPtP"
+
msgid "Package libiwinfo required!"
msgstr "需要libiwinfo软件包！"
-msgid "Package lists"
-msgstr "软件å\90\8cæ¥æº\90"
+msgid "Package lists are older than 24 hours"
+msgstr "软件å\8c\85å\88\97表已è¶\8524å°\8fæ\97¶æ\9cªæ\9b´æ\96°"
msgid "Package name"
msgstr "软件包名称"
msgid "Path to CA-Certificate"
msgstr "CA证书路径"
+msgid "Path to Client-Certificate"
+msgstr "客户端证书路径"
+
msgid "Path to Private Key"
msgstr "私钥路径"
msgid "Perform reboot"
msgstr "执行重启"
+msgid "Perform reset"
+msgstr "执行复位"
+
msgid "Phy Rate:"
-msgstr "物理速率:"
+msgstr "实际速率:"
msgid "Physical Settings"
msgstr "物理设置"
msgid "Port %d is untagged in multiple VLANs!"
msgstr "端口 %d 在多个VLAN中均未标记！"
-msgid ""
-"Port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> specify the default VLAN "
-"ID added to received untagged frames."
-msgstr ""
-"端口的<abbr title=\"Primary VLAN IDs\">PVID</abbr>指定了添加到所接收的未标记"
-"桢的默认VLAN ID。"
-
-msgid "Port PVIDs on %q"
-msgstr "分配%q的端口PVID"
-
-msgid "Post-commit actions"
-msgstr "Post-commit操作"
-
msgid "Power"
msgstr "Power"
+msgid ""
+"Presume peer to be dead after given amount of LCP echo failures, use 0 to "
+"ignore failures"
+msgstr "在指定数量的LCP响应故障后假定链路已断开，值0为忽略响应故障"
+
msgid "Prevents client-to-client communication"
msgstr "禁止客户端间的通信"
msgid "Proceed"
msgstr "执行"
-msgid "Proceed reverting all settings and resetting to firmware defaults?"
-msgstr "放弃所有配置并将路由复位到默认状态？"
-
msgid "Processes"
-msgstr "进程"
-
-msgid "Processor"
-msgstr "处理器"
+msgstr "系统进程"
msgid "Prot."
msgstr "协议"
msgid "Protocol family"
msgstr "协议族"
+msgid "Protocol of the new interface"
+msgstr "新接口的协议"
+
+msgid "Protocol support is not installed"
+msgstr "未安装协议支持"
+
msgid "Provide new network"
msgstr "添加新网络"
msgid "RX"
msgstr "接收"
-msgid "Radius-Port"
-msgstr "Radius-端口"
+msgid "RX Rate"
+msgstr "接收速率"
+
+msgid "Radius-Accounting-Port"
+msgstr "Radius-Accounting-Port"
-msgid "Radius-Server"
-msgstr "Radius-服务器"
+msgid "Radius-Accounting-Secret"
+msgstr "Radius-Accounting-Secret"
+
+msgid "Radius-Accounting-Server"
+msgstr "Radius-Accounting-Server"
+
+msgid "Radius-Authentication-Port"
+msgstr "Radius-Authentication-Port"
+
+msgid "Radius-Authentication-Secret"
+msgstr "Radius-Authentication-Secret"
+
+msgid "Radius-Authentication-Server"
+msgstr "Radius-Authentication-Server"
msgid ""
"Read <code>/etc/ethers</code> to configure the <abbr title=\"Dynamic Host "
"Really delete this interface? The deletion cannot be undone!\n"
"You might lose access to this router if you are connected via this interface."
msgstr ""
-"真的要删除此接口？删除操作无法撤销！\n"
-"如果正由此接口管理路由，可能导致无法再管理路由器！"
+"删除此接口，可能导致无法再访问路由器！\n"
+"确定要删除此接口？删除操作无法撤销！"
msgid ""
"Really delete this wireless network? The deletion cannot be undone!\n"
"You might lose access to this router if you are connected via this network."
msgstr ""
-"真的要删除此无线网络？删除操作无法撤销！\n"
-"如果正由此网络管理路由，可能导致无法再管理路由器！"
+"删除此无线网络，可能导致无法再访问路由器！\n"
+"确定要删除此无线网络？删除操作无法撤销！"
+
+msgid "Really reset all changes?"
+msgstr "确定要放弃所有更改？"
msgid ""
"Really shutdown interface \"%s\" ?\n"
"You might lose access to this router if you are connected via this interface."
msgstr ""
-"真的要关闭\"%s\" 接口？\n"
-"如果正由此接口管理路由，可能导致无法再管理路由器！"
-
-msgid ""
-"Really shutdown network ?\n"
-"You might loose access to this router if you are connected via this "
-"interface."
-msgstr ""
-"真的要关闭此网络？\n"
-"如果正由此网络管理路由，可能导致无法再管理路由器！"
+"关闭此接口，可能导致无法再访问路由器！\n"
+"确定要关闭\"%s\"接口？"
msgid ""
"Really shutdown network ?\n"
"You might lose access to this router if you are connected via this interface."
msgstr ""
-"真的要关闭此网络？\n"
-"如果正由此网络管理路由，可能导致无法再管理路由器！"
+"关闭此网络，可能导致无法再访问路由器！\n"
+"确定要关闭此网络？"
+
+msgid "Really switch protocol?"
+msgstr "确定要切换协议？"
msgid "Realtime Connections"
msgstr "实时连接"
+msgid "Realtime Graphs"
+msgstr "实时绘图"
+
msgid "Realtime Load"
msgstr "实时负载"
msgid "Reboot"
msgstr "重启"
+msgid "Rebooting..."
+msgstr "重启中..."
+
msgid "Reboots the operating system of your device"
msgstr "重启设备的系统"
msgid "Regulatory Domain"
msgstr "约束域"
-msgid "Relay Settings"
-msgstr "中继设置"
+msgid "Relay"
+msgstr "中继"
+
+msgid "Relay Bridge"
+msgstr "中继桥"
msgid "Relay between networks"
msgstr "网络间中继"
+msgid "Relay bridge"
+msgstr "中继桥"
+
+msgid "Remote IPv4 address"
+msgstr "远程IPv4地址"
+
msgid "Remove"
msgstr "移除"
msgid "Repeat scan"
msgstr "重新扫描"
-msgid "Replace default route"
-msgstr "重置默认路由"
-
msgid "Replace entry"
msgstr "重置条目"
msgid "Replace wireless configuration"
msgstr "重置无线配置"
+msgid "Required for certain ISPs, e.g. Charter with DOCSIS 3"
+msgstr "某些ISP需要，例如:同轴线网络DOCSIS 3"
+
msgid "Reset"
msgstr "复位"
msgid "Reset Counters"
msgstr "复位计数器"
-msgid "Reset router to defaults"
-msgstr "恢复出厂设置"
+msgid "Reset to defaults"
+msgstr "复位系统"
msgid "Resolv and Hosts Files"
msgstr "主机和解析文件"
msgstr "路由密码"
msgid "Routes"
-msgstr "路由"
+msgstr "路由表"
msgid ""
"Routes specify over which interface and gateway a certain host or network "
"can be reached."
msgstr "路由表描述了数据包的可达路径。"
-msgid "Routing table ID"
-msgstr "路由表ID"
-
msgid "Rule #"
msgstr "规则#"
msgid "Scheduled Tasks"
msgstr "计划任务"
-msgid ""
-"Seconds to wait for the modem to become ready before attempting to connect"
-msgstr "Modem尝试连接的就绪准备时间"
-
msgid "Section added"
msgstr "添加的区域"
msgid "See \"mount\" manpage for details"
msgstr "详参\"mount\"联机帮助"
-msgid "Send Router Solicitiations"
-msgstr "发送路由探测"
+msgid ""
+"Send LCP echo requests at the given interval in seconds, only effective in "
+"conjunction with failure threshold"
+msgstr "在指定的时间间隔发送LCP响应(秒)，仅在结合了故障阈值时有效"
+
+msgid "Send router solicitations"
+msgstr "发送路由请求"
msgid "Separate Clients"
msgstr "隔离客户端"
msgid "Separate WDS"
msgstr "隔离WDS"
-msgid "Server IPv4-Address"
-msgstr "服务器IPv4-地址"
-
msgid "Server Settings"
msgstr "服务器设置"
-msgid "Service type"
+msgid "Service Name"
+msgstr "服务名"
+
+msgid "Service Type"
msgstr "服务类型"
msgid "Services"
msgstr "服务"
-msgid "Services and daemons perform certain tasks on your device."
-msgstr "路由器上运行的部分任务和服务。"
-
-msgid "Settings"
-msgstr "设置"
-
msgid "Setup DHCP Server"
msgstr "配置DHCP服务器"
-msgid "Setup wait time"
-msgstr "设置缓冲时间"
+msgid "Setup Time Synchronization"
+msgstr "设置时间同步"
+
+msgid "Show current backup file list"
+msgstr "显示当前备份文件列表"
msgid "Shutdown this interface"
msgstr "关闭此接口"
msgstr "某些项的键值无效，无法保存！"
msgid ""
-"Sorry. OpenWrt does not support a system upgrade on this platform.<br /> You "
-"need to manually flash your device."
-msgstr "抱歉，OpenWrt不支持本平台的系统升级。<br />请手动刷新设备。"
+"Sorry, there is no sysupgrade support present, a new firmware image must be "
+"flashed manually. Please refer to the OpenWrt wiki for device specific "
+"install instructions."
+msgstr ""
+"抱歉，当前系统不支持sysupgrade升级，需手动刷新固件。请参考OpenWrt wiki页面的"
+"特定设备安装向导。"
msgid "Sort"
msgstr "排序"
msgid "Source"
msgstr "源地址"
+msgid "Specifies the advertised preferred prefix lifetime in seconds"
+msgstr "指定通告的首选前缀生存时间(秒)"
+
+msgid "Specifies the advertised valid prefix lifetime in seconds"
+msgstr "指定通告的有效前缀生存时间(秒)"
+
msgid "Specifies the button state to handle"
msgstr "指定要处理的按键状态"
msgid "Specifies the listening port of this <em>Dropbear</em> instance"
msgstr "指定此<em>Dropbear</em>实例的监听端口"
-msgid "Specify additional command line arguments for pppd here"
-msgstr "指定附加命令行参数到pppd"
+msgid ""
+"Specifies the maximum amount of failed ARP requests until hosts are presumed "
+"to be dead"
+msgstr "指定假设主机已丢失的最大失败ARP请求数"
+
+msgid ""
+"Specifies the maximum amount of seconds after which hosts are presumed to be "
+"dead"
+msgstr "指定假设主机已丢失的最大时间(秒)"
msgid "Specify the secret encryption key here."
msgstr "指定安全加密。"
msgid "Static WDS"
msgstr "静态WDS"
+msgid "Static address"
+msgstr "静态地址"
+
msgid ""
"Static leases are used to assign fixed IP addresses and symbolic hostnames "
"to DHCP clients. They are also required for non-dynamic interface "
"configurations where only hosts with a corresponding lease are served."
-msgstr "静态租约用于给DHCP客户端分配固定的IP地址和主机标识。只有合法主机才能连接，并且接口须为非动态配置。"
+msgstr ""
+"静态租约用于给DHCP客户端分配固定的IP地址和主机标识。只有合法主机才能连接，并"
+"且接口须为非动态配置。"
msgid "Status"
msgstr "状态"
msgid "Switch %q"
msgstr "交换机 %q"
+msgid "Switch %q (%s)"
+msgstr "交换机%q (%s)"
+
+msgid "Switch protocol"
+msgstr "切换协议"
+
+msgid "Sync with browser"
+msgstr "同步浏览器时间"
+
+msgid "Synchronizing..."
+msgstr "同步中..."
+
msgid "System"
msgstr "系统"
msgid "TFTP server root"
msgstr "TFTP服务器根"
-msgid "TTL"
-msgstr "TTL"
-
msgid "TX"
msgstr "发送"
+msgid "TX Rate"
+msgstr "发送速率"
+
msgid "Table"
msgstr "表格"
"SSID capable). Per network settings like encryption or operation mode are "
"grouped in the <em>Interface Configuration</em>."
msgstr ""
-"<em>设备配置</em>区域可配置无线的硬件参数，比如信道、发射功率或发射天线(如果此无线模块硬件支持多SSID，则全部SSID共用此设备配置)。<e"
-"m>接口配置</em>区域则可配置此网络的工作模式和加密等。"
+"<em>设备配置</em>区域可配置无线的硬件参数，比如信道、发射功率或发射天线(如果"
+"此无线模块硬件支持多SSID，则全部SSID共用此设备配置)。<em>接口配置</em>区域则"
+"可配置此网络的工作模式和加密等。"
msgid ""
-"The <em>libiwinfo</em> package is not installed. You must install this "
+"The <em>libiwinfo-lua</em> package is not installed. You must install this "
"component for working wireless configuration!"
-msgstr "<em>libiwinfo</em>软件包未安装。必需安装此组件以配置无线！"
+msgstr "<em>libiwinfo-lua</em>软件包未安装。必需安装此组件以配置无线！"
msgid ""
"The allowed characters are: <code>A-Z</code>, <code>a-z</code>, <code>0-9</"
"存储器或分区的设备文件，(<abbr title=\"for example\">例如</abbr> <code>/dev/"
"sda1</code>)"
-msgid "The device node of your modem, e.g. /dev/ttyUSB0"
-msgstr "modem的设备节点。例如/dev/ttyUSB0"
-
msgid ""
"The filesystem that was used to format the memory (<abbr title=\"for example"
"\">e.g.</abbr> <samp><abbr title=\"Third Extended Filesystem\">ext3</abbr></"
"The flash image was uploaded. Below is the checksum and file size listed, "
"compare them with the original file to ensure data integrity.<br /> Click "
"\"Proceed\" below to start the flash procedure."
-msgstr "固件已上传，请注意核对文件大小和校验值！<br />点击 \"执行\" 开始刷新固件，刷新过程切勿断电！"
+msgstr ""
+"固件已上传，请注意核对文件大小和校验值！<br />点击 \"执行\" 开始刷新固件，刷"
+"新过程切勿断电！"
msgid "The following changes have been committed"
msgstr "以下更改已提交"
msgid "The following changes have been reverted"
msgstr "以下更改已放弃"
-msgid ""
-"The following files are detected by the system and will be kept "
-"automatically during sysupgrade"
-msgstr "更新固件时要保存的文件"
-
msgid "The following rules are currently active on this system."
msgstr "下面是系统中的活跃连接。"
+msgid "The given network name is not unique"
+msgstr "给定的网络名重复"
+
msgid ""
"The hardware is not multi-SSID capable and existing configuration will be "
"replaced if you proceed."
"segments. Often there is by default one Uplink port for a connection to the "
"next greater network like the internet and other ports for a local network."
msgstr ""
-"本设备可以划分为多个<abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>，并支持电脑间的直接通讯。<abbr title=\"Virtual Local Area "
-"Network\">VLAN</abbr>也常用于分割不同网段。默认通常是一条上行端口连接ISP，其余端口为本地子网。"
+"本设备可以划分为多个<abbr title=\"Virtual Local Area Network\">VLAN</abbr>，"
+"并支持电脑间的直接通讯。<abbr title=\"Virtual Local Area Network\">VLAN</"
+"abbr>也常用于分割不同网段。默认通常是一条上行端口连接ISP，其余端口为本地子"
+"网。"
+
+msgid "The selected protocol needs a device assigned"
+msgstr "所选的协议需要分配设备"
+
+msgid ""
+"The system is erasing the configuration partition now and will reboot itself "
+"when finished."
+msgstr "系统正在删除配置分区，完成后会自动重启。"
msgid ""
"The system is flashing now.<br /> DO NOT POWER OFF THE DEVICE!<br /> Wait a "
"address of your computer to reach the device again, depending on your "
"settings."
msgstr ""
-"正在刷新系统...<br />DO NOT POWER OFF THE DEVICE! 切勿关闭电源!<br "
-"/>稍等数分钟即可重新连接到路由。可能需要更改计算机的IP地址以重新连接。"
+"正在刷新系统...<br />切勿关闭电源! DO NOT POWER OFF THE DEVICE!<br />稍等数分"
+"钟即可重新连接到路由。可能需要更改计算机的IP地址以重新连接。"
msgid ""
"The uploaded image file does not contain a supported format. Make sure that "
msgstr "没有任何更改！"
msgid ""
+"There is no device assigned yet, please attach a network device in the "
+"\"Physical Settings\" tab"
+msgstr "尚未分配设备，请在\"物理设置\"区域连接网络设备"
+
+msgid ""
"There is no password set on this router. Please configure a root password to "
"protect the web interface and enable SSH."
msgstr "尚未设置密码。请为root用户设置密码以保护路由器和开启SSH。"
msgid ""
-"These commands will be executed automatically when a given <abbr title="
-"\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
-"allowing changes to be applied instantly."
+"This is a list of shell glob patterns for matching files and directories to "
+"include during sysupgrade. Modified files in /etc/config/ and certain other "
+"configurations are automatically preserved."
msgstr ""
-"当<abbr title=\"Unified Configuration Interface\">UCI</abbr>配置提交并生效"
-"后，这些命令将被自动执行。"
+"系统升级时要保存的配置文件和目录的清单表。目录/etc/config/内修改过的文件以及"
+"部分其他配置会被自动保存。"
-msgid ""
-"This is a list of shell glob patterns for matching files and directories to "
-"include during sysupgrade"
-msgstr "系统升级时要保存的配置文件以及目录的串列清单"
+msgid "This is the 32 byte hex encoded user ID, not the login name"
+msgstr "这是32 byte hex编码的用户ID，不是登录名"
msgid ""
"This is the content of /etc/rc.local. Insert your own commands here (in "
"front of 'exit 0') to execute them at the end of the boot process."
-msgstr "此处显示了 /etc/rc.local 的内容。将自定义的命令插入到('exit 0')之前，即可在系统启动完成时自动运行。"
+msgstr ""
+"此处显示了/etc/rc.local的内容。将自定义的命令插入到('exit 0')之前，即可在系统"
+"启动完成时自动运行。"
+
+msgid ""
+"This is the local endpoint address assigned by the tunnel broker, it usually "
+"ends with <code>:2</code>"
+msgstr "这是隧道代理分配的本地终端地址，通常以<code>:2</code>结尾"
msgid ""
"This is the only <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</"
msgstr "这里可以自定义系统crontab中的计划任务。"
msgid ""
+"This is usually the address of the nearest PoP operated by the tunnel broker"
+msgstr "这通常是隧道代理所管理的最近于PoP的地址"
+
+msgid ""
"This list gives an overview over currently running system processes and "
"their status."
msgstr "这里显示了当前系统中正在运行的进程和其状态信息。"
msgid "This section contains no values yet"
msgstr "本区域尚无任何配置"
-msgid "Time (in seconds) after which an unused connection will be closed"
-msgstr "自动关闭空闲连接的延迟时间(秒)"
+msgid "Time Synchronization"
+msgstr "时间同步"
-msgid "Time Server (rdate)"
-msgstr "校时服务器(rdate)"
+msgid "Time Synchronization is not configured yet."
+msgstr "尚未配置时间同步"
msgid "Timezone"
msgstr "时区"
+msgid ""
+"To restore configuration files, you can upload a previously generated backup "
+"archive here."
+msgstr "在此处上传之前生成的备份存档，即可恢复配置。"
+
msgid "Total Available"
msgstr "总共可用"
msgid "Traffic"
-msgstr "网络流量"
+msgstr "流量"
msgid "Transfer"
msgstr "传输"
msgid "Trigger Mode"
msgstr "触发模式"
+msgid "Tunnel ID"
+msgstr "隧道ID"
+
msgid "Tunnel Interface"
msgstr "隧道接口"
-msgid "Tunnel Settings"
-msgstr "隧道设置"
-
msgid "Turbo Mode"
msgstr "Turbo模式"
msgid "UDP:"
msgstr "UDP:"
+msgid "UMTS/GPRS/EV-DO"
+msgstr "UMTS/GPRS/EV-DO"
+
msgid "USB Device"
msgstr "USB设备"
msgid "UUID"
msgstr "UUID"
+msgid "Unknown"
+msgstr "未知"
+
msgid "Unknown Error, password not changed!"
msgstr "未知错误，密码未更改！"
+msgid "Unmanaged"
+msgstr "Unmanaged"
+
msgid "Unsaved Changes"
msgstr "未保存的配置"
-msgid "Update package lists"
-msgstr "更新软件列表"
+msgid "Unsupported protocol type."
+msgstr "不支持的协议类型"
-msgid "Upload an OpenWrt image file to reflash the device."
-msgstr "上传OpenWrt固件以刷新设备。"
+msgid "Update lists"
+msgstr "刷新列表"
-msgid "Upload image"
-msgstr "上传固件"
+msgid ""
+"Upload a sysupgrade-compatible image here to replace the running firmware. "
+"Check \"Keep settings\" to retain the current configuration (requires an "
+"OpenWrt compatible firmware image)."
+msgstr ""
+"上传兼容的sysupgrade固件到此处以刷新当前系统。选中\"保留配置\"可保留当前的系"
+"统配置(需是OpenWrt兼容固件)。"
+
+msgid "Upload archive..."
+msgstr "上传备份..."
msgid "Uploaded File"
msgstr "上传的文件"
msgid "Use <code>/etc/ethers</code>"
msgstr "使用<code>/etc/ethers</code>"
+msgid "Use DHCP gateway"
+msgstr "使用DHCP网关"
+
+msgid "Use DNS servers advertised by peer"
+msgstr "使用端局通告的DNS服务器"
+
msgid "Use ISO/IEC 3166 alpha2 country codes."
msgstr "使用ISO/IEC 3166 alpha2国家代码。"
+msgid "Use MTU on tunnel interface"
+msgstr "在隧道接口使用MTU"
+
+msgid "Use TTL on tunnel interface"
+msgstr "在隧道接口使用TTL"
+
msgid "Use as root filesystem"
msgstr "挂载到根文件系统"
-msgid "Use peer DNS"
-msgstr "使用对等DNS"
+msgid "Use broadcast flag"
+msgstr "使用广播标签"
+
+msgid "Use custom DNS servers"
+msgstr "使用自定义的DNS服务器"
+
+msgid "Use default gateway"
+msgstr "使用默认网关"
+
+msgid "Use gateway metric"
+msgstr "使用网关跃点"
+
+msgid "Use preferred lifetime"
+msgstr "使用首选生存时间"
+
+msgid "Use routing table"
+msgstr "使用路由表"
msgid ""
"Use the <em>Add</em> Button to add a new lease entry. The <em>MAC-Address</"
"address to use and the <em>Hostname</em> is assigned as symbolic name to the "
"requesting host."
msgstr ""
-"使用<em>添加</em>按键来增加新的租约条目。<em>MAC-地址</em>鉴别主机，<em>IPv4-地址</em>分配地址，<em>主机名</e"
-"m>分配标识。"
+"使用<em>添加</em>按键来增加新的租约条目。<em>MAC-地址</em>鉴别主机，<em>IPv4-"
+"地址</em>分配地址，<em>主机名</em>分配标识。"
+
+msgid "Use valid lifetime"
+msgstr "使用有效生存时间"
msgid "Used"
msgstr "已用"
msgid "VC-Mux"
msgstr "VC-Mux"
-msgid "VLAN %d"
-msgstr "VLAN %d"
-
msgid "VLAN Interface"
msgstr "VLAN 接口"
msgid "VLANs on %q"
-msgstr "划分%q的VLAN"
+msgstr "VLANs on %q"
+
+msgid "VLANs on %q (%s)"
+msgstr "VLANs on %q (%s)"
+
+msgid "VPN Server"
+msgstr "VPN服务器"
+
+msgid "Vendor Class to send when requesting DHCP"
+msgstr "请求DHCP时发送的Vendor Class"
+
+msgid "Verify"
+msgstr "验证"
msgid "Version"
msgstr "版本"
msgid ""
"WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP "
"and ad-hoc mode) to be installed."
-msgstr "WPA加密需要安装wpa_supplicant(客户端模式)或安装hostapd(接入点AP、点对点ad-hoc模式)。"
+msgstr ""
+"WPA加密需要安装wpa_supplicant(客户端模式)或安装hostapd(接入点AP、点对点ad-hoc"
+"模式)。"
msgid "Waiting for router..."
msgstr "等待路由器..."
msgid "Warning"
-msgstr "警告"
+msgstr "Warning"
msgid "Warning: There are unsaved changes that will be lost while rebooting!"
msgstr "警告: 有尚未保存的更改，重启后将丢失!"
-msgid "Web <abbr title=\"User Interface\">UI</abbr>"
-msgstr "Web <abbr title=\"User Interface\">UI</abbr>"
-
msgid "Wifi"
msgstr "无线"
"after a device reboot.<br /><strong>Warning: If you disable essential init "
"scripts like \"network\", your device might become inaccesable!</strong>"
msgstr ""
-"此处可以启用或禁用已安装的启动脚本。更改在设备重启后生效。<br "
-"/><strong>警告：如果禁用了必要的启动脚本，比如\"network\"，可能会导致设备无法访问！</strong>"
-
-msgid ""
-"You can specify multiple DNS servers here, press enter to add a new entry. "
-"Servers entered here will override automatically assigned ones."
-msgstr "这里可以指定多路DNS服务器。输入后会自动覆盖已分配的条目。"
+"此处可以启用或禁用已安装的启动脚本。更改在设备重启后生效。<br /><strong>警"
+"告：如果禁用了必要的启动脚本，比如\"network\"，可能会导致设备无法访问！</"
+"strong>"
msgid ""
"You must enable Java Script in your browser or LuCI will not work properly."
msgstr "LUCI的正常运行需要开启浏览器的Java Script支持。"
-msgid ""
-"You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
-"\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
-msgstr ""
-"UMTS/GPRS功能需安装\"comgt\",PPPoE需安装\"ppp-mod-pppoe\",PPPoA需安装\"ppp-mod-"
-"pppoa\",PPtP需安装\"pptp\"。"
-
msgid "any"
msgstr "任意"
msgid "auto"
msgstr "自动"
-msgid "back"
-msgstr "后退"
-
msgid "bridged"
msgstr "已桥接"
-msgid "buffered"
-msgstr "已缓冲"
-
-msgid "cached"
-msgstr "已缓存"
-
msgid "creates a bridge over specified interface(s)"
msgstr "为指定接口创建桥接"
msgstr ""
"存放<abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>租约的文件"
-msgid "free"
-msgstr "空闲"
+msgid "forward"
+msgstr "转发"
msgid "help"
msgstr "帮助"
msgid "if target is a network"
msgstr "如果对象是一个网络"
+msgid "input"
+msgstr "输入"
+
msgid "local <abbr title=\"Domain Name System\">DNS</abbr> file"
msgstr "本地<abbr title=\"Domain Name System\">DNS</abbr>解析文件"
msgstr "无"
msgid "off"
-msgstr "关闭"
+msgstr "off"
+
+msgid "on"
+msgstr "on"
msgid "routed"
msgstr "路由守护"
-msgid "static"
-msgstr "静态IP"
-
msgid "tagged"
msgstr "已标记"
msgid "« Back"
msgstr "« 后退"
+#~ msgid "Custom Files"
+#~ msgstr "自定义文件"
+
+#~ msgid "Custom files"
+#~ msgstr "自定义文件"
+
+#~ msgid "Detected Files"
+#~ msgstr "查询到的文件"
+
+#~ msgid "Detected files"
+#~ msgstr "查询到的文件"
+
+#~ msgid "Files to be kept when flashing a new firmware"
+#~ msgstr "更新固件时被保存的文件"
+
+#~ msgid "General"
+#~ msgstr "基本信息"
+
+#~ msgid ""
+#~ "Here you can customize the settings and the functionality of <abbr title="
+#~ "\"Lua Configuration Interface\">LuCI</abbr>."
+#~ msgstr ""
+#~ "这里可以自定义<abbr title=\"Lua Configuration Interface\">LuCI</abbr>的组"
+#~ "件和功能。"
+
+#~ msgid "Post-commit actions"
+#~ msgstr "Post-commit操作"
+
+#~ msgid ""
+#~ "The following files are detected by the system and will be kept "
+#~ "automatically during sysupgrade"
+#~ msgstr "更新固件时要保存的文件"
+
+#~ msgid ""
+#~ "These commands will be executed automatically when a given <abbr title="
+#~ "\"Unified Configuration Interface\">UCI</abbr> configuration is committed "
+#~ "allowing changes to be applied instantly."
+#~ msgstr ""
+#~ "当<abbr title=\"Unified Configuration Interface\">UCI</abbr>配置提交并生效"
+#~ "后，这些命令将被自动执行。"
+
+#~ msgid ""
+#~ "This is a list of shell glob patterns for matching files and directories "
+#~ "to include during sysupgrade"
+#~ msgstr "系统升级时要保存的配置文件以及目录的串列清单"
+
+#~ msgid "Web <abbr title=\"User Interface\">UI</abbr>"
+#~ msgstr "Web <abbr title=\"User Interface\">UI</abbr>"
+
+#~ msgid "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"
+#~ msgstr ""
+#~ "<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-服务器"
+
+#~ msgid "AHCP Settings"
+#~ msgstr "AHCP设置"
+
+#~ msgid "ARP ping retries"
+#~ msgstr "重试ARP ping"
+
+#~ msgid "ATM Settings"
+#~ msgstr "ATM设置"
+
+#~ msgid "Accept Router Advertisements"
+#~ msgstr "接收路由公告"
+
+#~ msgid "Access point (APN)"
+#~ msgstr "接入点(APN)"
+
+#~ msgid "Additional pppd options"
+#~ msgstr "附加pppd选项"
+
+#~ msgid "Allowed range is 1 to FFFF"
+#~ msgstr "允许范围：1 ~ FFFF"
+
+#~ msgid "Automatic Disconnect"
+#~ msgstr "自动断开"
+
+#~ msgid "Backup Archive"
+#~ msgstr "备份的存档"
+
+#~ msgid ""
+#~ "Configure the local DNS server to use the name servers adverticed by the "
+#~ "PPP peer"
+#~ msgstr "本地DNS服务器使用PPP端局提供的域名服务器"
+
+#~ msgid "Connect script"
+#~ msgstr "连接脚本"
+
+#~ msgid "Create backup"
+#~ msgstr "创建备份"
+
+#~ msgid "Default"
+#~ msgstr "默认"
+
+#~ msgid "Disconnect script"
+#~ msgstr "断开脚本"
+
+#~ msgid "Edit package lists and installation targets"
+#~ msgstr "修改软件包的同步源和安装地址"
+
+#~ msgid "Enable 4K VLANs"
+#~ msgstr "开启4K VLAN"
+
+#~ msgid "Enable IPv6 on PPP link"
+#~ msgstr "在PPP链路上启用IPv6"
+
+#~ msgid "Firmware image"
+#~ msgstr "固件文件"
+
+#~ msgid "Forward DHCP"
+#~ msgstr "转发DHCP"
+
+#~ msgid "Forward broadcasts"
+#~ msgstr "转发广播"
+
+#~ msgid "HE.net Tunnel ID"
+#~ msgstr "HE.net隧道ID"
+
+#~ msgid ""
+#~ "Here you can backup and restore your router configuration and - if "
+#~ "possible - reset the router to the default settings."
+#~ msgstr "这里可以备份和恢复路由器的配置，也可以恢复到系统出厂设置。"
+
+#~ msgid "Installation targets"
+#~ msgstr "安装位置"
+
+#~ msgid "Keep configuration files"
+#~ msgstr "保留配置文件"
+
+#~ msgid "Keep-Alive"
+#~ msgstr "保持活动"
+
+#~ msgid "Kernel"
+#~ msgstr "内核"
+
+#~ msgid ""
+#~ "Let pppd replace the current default route to use the PPP interface after "
+#~ "successful connect"
+#~ msgstr "PPP连接成功后替换当前默认路由为pppd"
+
+#~ msgid "Let pppd run this script after establishing the PPP link"
+#~ msgstr "PPP连接建立后运行此脚本"
+
+#~ msgid "Let pppd run this script before tearing down the PPP link"
+#~ msgstr "PPP连接断开前运行此脚本"
+
+#~ msgid ""
+#~ "Make sure that you provide the correct pin code here or you might lock "
+#~ "your sim card!"
+#~ msgstr "请确认pin码正确，并且没有锁定sim卡！"
+
+#~ msgid ""
+#~ "Most of them are network servers, that offer a certain service for your "
+#~ "device or network like shell access, serving webpages like <abbr title="
+#~ "\"Lua Configuration Interface\">LuCI</abbr>, doing mesh routing, sending "
+#~ "e-mails, ..."
+#~ msgstr ""
+#~ "这些大部分是为设备或网络提供特定服务的，比如shell访问，<abbr title=\"Lua "
+#~ "Configuration Interface\">LuCI</abbr> App，网间漫游，发送E-mail等..."
+
+#~ msgid "Number of failed connection tests to initiate automatic reconnect"
+#~ msgstr "启动自动重连的失败连接次数"
+
+#~ msgid "Override Gateway"
+#~ msgstr "更新网关"
+
+#~ msgid "PIN code"
+#~ msgstr "PIN码"
+
+#~ msgid "PPP Settings"
+#~ msgstr "PPP设置"
+
+#~ msgid "Package lists"
+#~ msgstr "软件同步源"
+
+#~ msgid ""
+#~ "Port <abbr title=\"Primary VLAN IDs\">PVIDs</abbr> specify the default "
+#~ "VLAN ID added to received untagged frames."
+#~ msgstr ""
+#~ "端口的<abbr title=\"Primary VLAN IDs\">PVID</abbr>指定了添加到所接收的未标"
+#~ "记桢的默认VLAN ID。"
+
+#~ msgid "Port PVIDs on %q"
+#~ msgstr "分配%q的端口PVID"
+
+#~ msgid "Proceed reverting all settings and resetting to firmware defaults?"
+#~ msgstr "放弃所有配置并将路由复位到默认状态？"
+
+#~ msgid "Processor"
+#~ msgstr "处理器"
+
+#~ msgid "Radius-Port"
+#~ msgstr "Radius-端口"
+
+#~ msgid "Radius-Server"
+#~ msgstr "Radius-服务器"
+
+#~ msgid ""
+#~ "Really shutdown network ?\n"
+#~ "You might loose access to this router if you are connected via this "
+#~ "interface."
+#~ msgstr ""
+#~ "真的要关闭此网络？\n"
+#~ "如果正由此网络管理路由，可能导致无法再管理路由器！"
+
+#~ msgid "Relay Settings"
+#~ msgstr "中继设置"
+
+#~ msgid "Replace default route"
+#~ msgstr "重置默认路由"
+
+#~ msgid "Reset router to defaults"
+#~ msgstr "恢复出厂设置"
+
+#~ msgid "Routing table ID"
+#~ msgstr "路由表ID"
+
+#~ msgid ""
+#~ "Seconds to wait for the modem to become ready before attempting to connect"
+#~ msgstr "Modem尝试连接的就绪准备时间"
+
+#~ msgid "Send Router Solicitiations"
+#~ msgstr "发送路由探测"
+
+#~ msgid "Server IPv4-Address"
+#~ msgstr "服务器IPv4-地址"
+
+#~ msgid "Service type"
+#~ msgstr "服务类型"
+
+#~ msgid "Services and daemons perform certain tasks on your device."
+#~ msgstr "路由器上运行的部分任务和服务。"
+
+#~ msgid "Settings"
+#~ msgstr "设置"
+
+#~ msgid "Setup wait time"
+#~ msgstr "设置缓冲时间"
+
+#~ msgid ""
+#~ "Sorry. OpenWrt does not support a system upgrade on this platform.<br /> "
+#~ "You need to manually flash your device."
+#~ msgstr "抱歉，OpenWrt不支持本平台的系统升级。<br />请手动刷新设备。"
+
+#~ msgid "Specify additional command line arguments for pppd here"
+#~ msgstr "指定附加命令行参数到pppd"
+
+#~ msgid "TTL"
+#~ msgstr "TTL"
+
+#~ msgid "The device node of your modem, e.g. /dev/ttyUSB0"
+#~ msgstr "modem的设备节点。例如/dev/ttyUSB0"
+
+#~ msgid "Time (in seconds) after which an unused connection will be closed"
+#~ msgstr "自动关闭空闲连接的延迟时间(秒)"
+
+#~ msgid "Time Server (rdate)"
+#~ msgstr "校时服务器(rdate)"
+
+#~ msgid "Tunnel Settings"
+#~ msgstr "隧道设置"
+
+#~ msgid "Update package lists"
+#~ msgstr "更新软件列表"
+
+#~ msgid "Upload an OpenWrt image file to reflash the device."
+#~ msgstr "上传OpenWrt固件以刷新设备。"
+
+#~ msgid "Upload image"
+#~ msgstr "上传固件"
+
+#~ msgid "Use peer DNS"
+#~ msgstr "使用对等DNS"
+
+#~ msgid "VLAN %d"
+#~ msgstr "VLAN %d"
+
+#~ msgid ""
+#~ "You can specify multiple DNS servers here, press enter to add a new "
+#~ "entry. Servers entered here will override automatically assigned ones."
+#~ msgstr "这里可以指定多路DNS服务器。输入后会自动覆盖已分配的条目。"
+
+#~ msgid ""
+#~ "You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, "
+#~ "\"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support"
+#~ msgstr ""
+#~ "UMTS/GPRS功能需安装\"comgt\",PPPoE需安装\"ppp-mod-pppoe\",PPPoA需安装"
+#~ "\"ppp-mod-pppoa\",PPtP需安装\"pptp\"。"
+
+#~ msgid "back"
+#~ msgstr "后退"
+
+#~ msgid "buffered"
+#~ msgstr "已缓冲"
+
+#~ msgid "cached"
+#~ msgstr "已缓存"
+
+#~ msgid "free"
+#~ msgstr "空闲"
+
+#~ msgid "static"
+#~ msgstr "静态IP"
+
#~ msgid ""
#~ "<abbr title=\"Lua Configuration Interface\">LuCI</abbr> is a collection "
#~ "of free Lua software including an <abbr title=\"Model-View-Controller"
projects / project / luci.git / blobdiff