arg[1] = arg[1] or ""
arg[2] = arg[2] or ""
-m = Map("wireless", translate("networks"), translate("a_w_networks1"))
+m = Map("wireless", "",
+ translate("The <em>Device Configuration</em> section covers physical settings of the radio " ..
+ "hardware such as channel, transmit power or antenna selection which is shared among all " ..
+ "defined wireless networks (if the radio hardware is multi-SSID capable). Per network settings " ..
+ "like encryption or operation mode are grouped in the <em>Interface Configuration</em>."))
+
m:chain("network")
+m.breadcrumb = {
+ { luci.dispatcher.build_url("admin/network/wireless"), translate("Wireless Networks") }
+}
+
local ifsection
function m.on_commit(map)
nw.init(m.uci)
ww.init(m.uci)
+local wnet = ww:get_network(arg[2])
+
+-- redirect to overview page if network does not exist anymore (e.g. after a revert)
+if not wnet then
+ luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless"))
+ return
+end
-local iw = nil
-local tx_powers = nil
+m.title = ww:get_i18n(wnet)
+
+
+local iw = luci.sys.wifi.getiwinfo(arg[1])
+local tx_powers = iw.txpwrlist or { }
+local hw_modes = iw.hwmodelist or { }
-m.uci:foreach("wireless", "wifi-iface",
- function(s)
- if s.device == arg[1] and not iw then
- iw = luci.sys.wifi.getiwinfo(s.ifname or s.device)
- tx_powers = iw.txpwrlist or { }
- end
- end)
-s = m:section(NamedSection, arg[1], "wifi-device", translate("device") .. " " .. arg[1])
+s = m:section(NamedSection, arg[1], "wifi-device", translate("Device Configuration"))
s.addremove = false
-s:tab("general", translate("a_w_general", "General Setup"))
-s:tab("macfilter", translate("a_w_macfilter", "MAC-Filter"))
-s:tab("advanced", translate("a_w_advanced", "Advanced Settings"))
+s:tab("general", translate("General Setup"))
+s:tab("macfilter", translate("MAC-Filter"))
+s:tab("advanced", translate("Advanced Settings"))
--[[
-back = s:option(DummyValue, "_overview", translate("overview"))
+back = s:option(DummyValue, "_overview", translate("Overview"))
back.value = ""
back.titleref = luci.dispatcher.build_url("admin", "network", "wireless")
]]
-en = s:taboption("general", Flag, "disabled", translate("enable"))
+st = s:taboption("general", DummyValue, "__status", translate("Status"))
+st.template = "admin_network/wifi_status"
+st.ifname = arg[1]
+
+en = s:taboption("general", Flag, "disabled", translate("Enable device"))
en.enabled = "0"
en.disabled = "1"
en.rmempty = false
return Flag.cfgvalue(self, section) or "0"
end
-s:taboption("general", DummyValue, "type", translate("type"))
local hwtype = m:get(arg[1], "type")
+local htcaps = m:get(arg[1], "ht_capab") and true or false
+
-- NanoFoo
local nsantenna = m:get(arg[1], "antenna")
-ch = s:taboption("general", Value, "channel", translate("a_w_channel"))
-ch:value("auto", translate("wifi_auto"))
-for c, f in luci.util.kspairs(luci.sys.wifi.channels()) do
- ch:value(c, "%i (%.3f GHz)" %{ c, f })
+ch = s:taboption("general", Value, "channel", translate("Channel"))
+ch:value("auto", translate("auto"))
+for _, f in ipairs(iw and iw.freqlist or luci.sys.wifi.channels()) do
+ if not f.restricted then
+ ch:value(f.channel, "%i (%.3f GHz)" %{ f.channel, f.mhz / 1000 })
+ end
end
if hwtype == "mac80211" then
tp = s:taboption("general",
(tx_powers and #tx_powers > 0) and ListValue or Value,
- "txpower", translate("a_w_txpwr"), "dBm")
+ "txpower", translate("Transmit Power"), "dBm")
tp.rmempty = true
- for _, p in ipairs(iw and iw.txpwrlist or {}) do
+ tp.default = tostring(iw and iw.txpower or tx_powers[#tx_powers])
+ for _, p in ipairs(tx_powers or {}) do
tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
end
+
+ mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
+ mode:value("", translate("auto"))
+ if hw_modes.b then mode:value("11b", "802.11b") end
+ if hw_modes.g then mode:value("11g", "802.11g") end
+ if hw_modes.a then mode:value("11a", "802.11a") end
+
+ if htcaps then
+ if hw_modes.g and hw_modes.n then mode:value("11ng", "802.11g+n") end
+ if hw_modes.a and hw_modes.n then mode:value("11na", "802.11a+n") end
+
+ htmode = s:taboption("advanced", ListValue, "htmode", translate("HT mode"))
+ htmode:depends("hwmode", "11na")
+ htmode:depends("hwmode", "11ng")
+ htmode:value("HT20", "20MHz")
+ htmode:value("HT40-", translate("40MHz 2nd channel below"))
+ htmode:value("HT40+", translate("40MHz 2nd channel above"))
+
+ --htcapab = s:taboption("advanced", DynamicList, "ht_capab", translate("HT capabilities"))
+ --htcapab:depends("hwmode", "11na")
+ --htcapab:depends("hwmode", "11ng")
+ end
+
+ local cl = iw and iw.countrylist
+ if cl and #cl > 0 then
+ cc = s:taboption("advanced", ListValue, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
+ cc.default = tostring(iw and iw.country or "00")
+ for _, c in ipairs(cl) do
+ cc:value(c.alpha2, "%s - %s" %{ c.alpha2, c.name })
+ end
+ else
+ s:taboption("advanced", Value, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
+ end
+
+ s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
+ translate("Distance to farthest network member in meters."))
end
if hwtype == "atheros" then
tp = s:taboption("general",
(#tx_powers > 0) and ListValue or Value,
- "txpower", translate("a_w_txpwr"), "dBm")
+ "txpower", translate("Transmit Power"), "dBm")
tp.rmempty = true
for _, p in ipairs(iw.txpwrlist) do
tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
end
- mode = s:taboption("advanced", ListValue, "hwmode", translate("mode"))
- mode:value("", translate("wifi_auto"))
- mode:value("11b", "802.11b")
- mode:value("11g", "802.11g")
- mode:value("11a", "802.11a")
- mode:value("11bg", "802.11b+g")
- mode:value("11gst", "802.11g + Turbo")
- mode:value("11ast", "802.11a + Turbo")
- mode:value("fh", translate("wifi_fh"))
+ mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
+ mode:value("", translate("auto"))
+ if hw_modes.b then mode:value("11b", "802.11b") end
+ if hw_modes.g then mode:value("11g", "802.11g") end
+ if hw_modes.a then mode:value("11a", "802.11a") end
+ if hw_modes.g then mode:value("11bg", "802.11b+g") end
+ if hw_modes.g then mode:value("11gst", "802.11g + Turbo") end
+ if hw_modes.a then mode:value("11ast", "802.11a + Turbo") end
+ mode:value("fh", translate("Frequency Hopping"))
- s:taboption("advanced", Flag, "diversity", translate("wifi_diversity")).rmempty = false
+ s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
if not nsantenna then
- ant1 = s:taboption("advanced", ListValue, "txantenna", translate("wifi_txantenna"))
+ ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
ant1.widget = "radio"
ant1.orientation = "horizontal"
ant1:depends("diversity", "")
- ant1:value("0", translate("wifi_auto"))
- ant1:value("1", translate("wifi_ant1", "Antenna 1"))
- ant1:value("2", translate("wifi_ant2", "Antenna 2"))
+ ant1:value("0", translate("auto"))
+ ant1:value("1", translate("Antenna 1"))
+ ant1:value("2", translate("Antenna 2"))
- ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("wifi_rxantenna"))
+ ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
ant2.widget = "radio"
ant2.orientation = "horizontal"
ant2:depends("diversity", "")
- ant2:value("0", translate("wifi_auto"))
- ant2:value("1", translate("wifi_ant1", "Antenna 1"))
- ant2:value("2", translate("wifi_ant2", "Antenna 2"))
+ ant2:value("0", translate("auto"))
+ ant2:value("1", translate("Antenna 1"))
+ ant2:value("2", translate("Antenna 2"))
else -- NanoFoo
- local ant = s:taboption("advanced", ListValue, "antenna", translate("wifi_txantenna"))
+ local ant = s:taboption("advanced", ListValue, "antenna", translate("Transmitter Antenna"))
ant:value("auto")
ant:value("vertical")
ant:value("horizontal")
ant:value("external")
end
- s:taboption("advanced", Value, "distance", translate("wifi_distance"),
- translate("wifi_distance_desc"))
- s:taboption("advanced", Value, "regdomain", translate("wifi_regdomain"))
- s:taboption("advanced", Value, "country", translate("wifi_country"))
- s:taboption("advanced", Flag, "outdoor", translate("wifi_outdoor"))
+ s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
+ translate("Distance to farthest network member in meters."))
+ s:taboption("advanced", Value, "regdomain", translate("Regulatory Domain"))
+ s:taboption("advanced", Value, "country", translate("Country Code"))
+ s:taboption("advanced", Flag, "outdoor", translate("Outdoor Channels"))
- --s:option(Flag, "nosbeacon", translate("wifi_nosbeacon"))
+ --s:option(Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
end
if hwtype == "broadcom" then
tp = s:taboption("general",
(#tx_powers > 0) and ListValue or Value,
- "txpower", translate("a_w_txpwr"), "dBm")
+ "txpower", translate("Transmit Power"), "dBm")
tp.rmempty = true
for _, p in ipairs(iw.txpwrlist) do
tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
- end
+ end
- mp = s:taboption("macfilter", ListValue, "macfilter", translate("wifi_macpolicy"))
+ mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
+ mode:value("11bg", "802.11b+g")
+ mode:value("11b", "802.11b")
+ mode:value("11g", "802.11g")
+ mode:value("11gst", "802.11g + Turbo")
+
+ mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
mp:value("", translate("disable"))
- mp:value("allow", translate("wifi_whitelist"))
- mp:value("deny", translate("wifi_blacklist"))
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("wifi_maclist"))
+ mp:value("allow", translate("Allow listed only"))
+ mp:value("deny", translate("Allow all except listed"))
+ ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
ml:depends({macfilter="allow"})
ml:depends({macfilter="deny"})
- ant1 = s:taboption("advanced", ListValue, "txantenna", translate("wifi_txantenna"))
+ ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
ant1.widget = "radio"
ant1:depends("diversity", "")
- ant1:value("3", translate("wifi_auto"))
- ant1:value("0", translate("wifi_ant1", "Antenna 1"))
- ant1:value("1", translate("wifi_ant2", "Antenna 2"))
+ ant1:value("3", translate("auto"))
+ ant1:value("0", translate("Antenna 1"))
+ ant1:value("1", translate("Antenna 2"))
- ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("wifi_rxantenna"))
+ ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
ant2.widget = "radio"
ant2:depends("diversity", "")
- ant2:value("3", translate("wifi_auto"))
- ant2:value("0", translate("wifi_ant1", "Antenna 1"))
- ant2:value("1", translate("wifi_ant2", "Antenna 2"))
+ ant2:value("3", translate("auto"))
+ ant2:value("0", translate("Antenna 1"))
+ ant2:value("1", translate("Antenna 2"))
- s:taboption("advanced", Flag, "frameburst", translate("wifi_bursting"))
+ s:taboption("advanced", Flag, "frameburst", translate("Frame Bursting"))
- s:taboption("advanced", Value, "distance", translate("wifi_distance"))
- --s:option(Value, "slottime", translate("wifi_slottime"))
+ s:taboption("advanced", Value, "distance", translate("Distance Optimization"))
+ --s:option(Value, "slottime", translate("Slot time"))
- s:taboption("advanced", Value, "country", translate("wifi_country"))
- s:taboption("advanced", Value, "maxassoc", translate("wifi_maxassoc"))
+ s:taboption("advanced", Value, "country", translate("Country Code"))
+ s:taboption("advanced", Value, "maxassoc", translate("Connection Limit"))
end
--------------------- HostAP Device ---------------------
if hwtype == "prism2" then
- s:taboption("advanced", Value, "txpower", translate("a_w_txpwr"), "att units").rmempty = true
+ s:taboption("advanced", Value, "txpower", translate("Transmit Power"), "att units").rmempty = true
- s:taboption("advanced", Flag, "diversity", translate("wifi_diversity")).rmempty = false
+ s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
- s:taboption("advanced", Value, "txantenna", translate("wifi_txantenna"))
- s:taboption("advanced", Value, "rxantenna", translate("wifi_rxantenna"))
+ s:taboption("advanced", Value, "txantenna", translate("Transmitter Antenna"))
+ s:taboption("advanced", Value, "rxantenna", translate("Receiver Antenna"))
end
local wnet = ww:get_network(arg[2])
if wnet then
- s = m:section(NamedSection, wnet.sid, "wifi-iface", ww:get_i18n(wnet))
+ s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
ifsection = s
s.addremove = false
s.anonymous = true
s.defaults.device = arg[1]
- s:tab("general", translate("a_w_general", "General Setup"))
- s:tab("encryption", translate("a_w_security", "Wireless Security"))
- s:tab("macfilter", translate("a_w_macfilter", "MAC-Filter"))
- s:tab("advanced", translate("a_w_advanced", "Advanced Settings"))
+ s:tab("general", translate("General Setup"))
+ s:tab("encryption", translate("Wireless Security"))
+ s:tab("macfilter", translate("MAC-Filter"))
+ s:tab("advanced", translate("Advanced Settings"))
- s:taboption("general", Value, "ssid", translate("wifi_essid"))
+ s:taboption("general", Value, "ssid", translate("<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
- mode = s:taboption("general", ListValue, "mode", translate("mode"))
+ mode = s:taboption("general", ListValue, "mode", translate("Mode"))
mode.override_values = true
- mode:value("ap", translate("a_w_ap"))
- mode:value("sta", translate("a_w_client"))
- mode:value("adhoc", translate("a_w_adhoc"))
+ mode:value("ap", translate("Access Point"))
+ mode:value("sta", translate("Client"))
+ mode:value("adhoc", translate("Ad-Hoc"))
- bssid = s:taboption("general", Value, "bssid", translate("wifi_bssid"))
+ bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"))
+
+ network = s:taboption("general", Value, "network", translate("Network"),
+ translate("Choose the network you want to attach to this wireless interface. " ..
+ "Select <em>unspecified</em> to not attach any network or fill out the " ..
+ "<em>create</em> field to define a new network."))
- network = s:taboption("general", Value, "network", translate("network"), translate("a_w_network1"))
network.rmempty = true
network.template = "cbi/network_netlist"
network.widget = "radio"
mode:value("mesh", "802.11s")
end
- mode:value("ahdemo", translate("a_w_ahdemo"))
- mode:value("monitor", translate("a_w_monitor"))
+ mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
+ mode:value("monitor", translate("Monitor"))
bssid:depends({mode="adhoc"})
- s:taboption("advanced", Value, "frag", translate("wifi_frag"))
- s:taboption("advanced", Value, "rts", translate("wifi_rts"))
+ s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+
+ mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
+ mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
+
+ function mode.write(self, section, value)
+ if value == "ap-wds" then
+ ListValue.write(self, section, "ap")
+ m.uci:set("wireless", section, "wds", 1)
+ elseif value == "sta-wds" then
+ ListValue.write(self, section, "sta")
+ m.uci:set("wireless", section, "wds", 1)
+ else
+ ListValue.write(self, section, value)
+ m.uci:delete("wireless", section, "wds")
+ end
+ end
+
+ function mode.cfgvalue(self, section)
+ local mode = ListValue.cfgvalue(self, section)
+ local wds = m.uci:get("wireless", section, "wds") == "1"
+
+ if mode == "ap" and wds then
+ return "ap-wds"
+ elseif mode == "sta" and wds then
+ return "sta-wds"
+ else
+ return mode
+ end
+ end
+
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
+ hidden:depends({mode="ap"})
+ hidden:depends({mode="ap-wds"})
end
-------------------- Madwifi Interface ----------------------
if hwtype == "atheros" then
- mode:value("ahdemo", translate("a_w_ahdemo"))
- mode:value("monitor", translate("a_w_monitor"))
- mode:value("ap-wds", "%s (%s)" % {translate("a_w_ap"), translate("a_w_wds")})
- mode:value("sta-wds", "%s (%s)" % {translate("a_w_client"), translate("a_w_wds")})
+ mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
+ mode:value("monitor", translate("Monitor"))
+ mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
+ mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
+ mode:value("wds", translate("Static WDS"))
function mode.write(self, section, value)
if value == "ap-wds" then
bssid:depends({mode="adhoc"})
bssid:depends({mode="ahdemo"})
+ bssid:depends({mode="wds"})
- wdssep = s:taboption("advanced", Flag, "wdssep", translate("wifi_wdssep"))
+ wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
wdssep:depends({mode="ap-wds"})
s:taboption("advanced", Flag, "doth", "802.11h")
- hidden = s:taboption("general", Flag, "hidden", translate("wifi_hidden"))
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
hidden:depends({mode="ap"})
hidden:depends({mode="adhoc"})
hidden:depends({mode="ap-wds"})
hidden:depends({mode="sta-wds"})
- isolate = s:taboption("advanced", Flag, "isolate", translate("wifi_isolate"),
- translate("wifi_isolate_desc"))
+ isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
+ translate("Prevents client-to-client communication"))
isolate:depends({mode="ap"})
- s:taboption("advanced", Flag, "bgscan", translate("wifi_bgscan"))
+ s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
- mp = s:taboption("macfilter", ListValue, "macpolicy", translate("wifi_macpolicy"))
+ mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
mp:value("", translate("disable"))
- mp:value("deny", translate("wifi_whitelist"))
- mp:value("allow", translate("wifi_blacklist"))
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("wifi_maclist"))
+ mp:value("deny", translate("Allow listed only"))
+ mp:value("allow", translate("Allow all except listed"))
+ ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
ml:depends({macpolicy="allow"})
ml:depends({macpolicy="deny"})
- s:taboption("advanced", Value, "rate", translate("wifi_rate"))
- s:taboption("advanced", Value, "mcast_rate", translate("wifi_mcast_rate"))
- s:taboption("advanced", Value, "frag", translate("wifi_frag"))
- s:taboption("advanced", Value, "rts", translate("wifi_rts"))
- s:taboption("advanced", Value, "minrate", translate("wifi_minrate"))
- s:taboption("advanced", Value, "maxrate", translate("wifi_maxrate"))
- s:taboption("advanced", Flag, "compression", translate("wifi_compression"))
+ s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
+ s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
+ s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
+ s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
+ s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
+ s:taboption("advanced", Flag, "compression", translate("Compression"))
- s:taboption("advanced", Flag, "bursting", translate("wifi_bursting"))
- s:taboption("advanced", Flag, "turbo", translate("wifi_turbo"))
- s:taboption("advanced", Flag, "ff", translate("wifi_ff"))
+ s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
+ s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
+ s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
- s:taboption("advanced", Flag, "wmm", translate("wifi_wmm"))
- s:taboption("advanced", Flag, "xr", translate("wifi_xr"))
- s:taboption("advanced", Flag, "ar", translate("wifi_ar"))
+ s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
+ s:taboption("advanced", Flag, "xr", translate("XR Support"))
+ s:taboption("advanced", Flag, "ar", translate("AR Support"))
- local swm = s:taboption("advanced", Flag, "sw_merge", translate("wifi_nosbeacon"))
+ local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
swm:depends({mode="adhoc"})
- local nos = s:taboption("advanced", Flag, "nosbeacon", translate("wifi_nosbeacon"))
+ local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
nos:depends({mode="sta"})
nos:depends({mode="sta-wds"})
- local probereq = s:taboption("advanced", Flag, "probereq", translate("wifi_noprobereq"))
+ local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
probereq.enabled = "0"
probereq.disabled = "1"
end
-------------------- Broadcom Interface ----------------------
if hwtype == "broadcom" then
- mode:value("wds", translate("a_w_wds"))
- mode:value("monitor", translate("a_w_monitor"))
+ mode:value("wds", translate("WDS"))
+ mode:value("monitor", translate("Monitor"))
- hidden = s:taboption("general", Flag, "hidden", translate("wifi_hidden"))
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
hidden:depends({mode="ap"})
hidden:depends({mode="adhoc"})
hidden:depends({mode="wds"})
- isolate = s:taboption("advanced", Flag, "isolate", translate("wifi_isolate"),
- translate("wifi_isolate_desc"))
+ isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
+ translate("Prevents client-to-client communication"))
isolate:depends({mode="ap"})
s:taboption("advanced", Flag, "doth", "802.11h")
- s:taboption("advanced", Flag, "wmm", translate("wifi_wmm"))
+ s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
bssid:depends({mode="wds"})
bssid:depends({mode="adhoc"})
----------------------- HostAP Interface ---------------------
if hwtype == "prism2" then
- mode:value("wds", translate("a_w_wds"))
- mode:value("monitor", translate("a_w_monitor"))
+ mode:value("wds", translate("WDS"))
+ mode:value("monitor", translate("Monitor"))
- hidden = s:taboption("general", Flag, "hidden", translate("wifi_hidden"))
+ hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
hidden:depends({mode="ap"})
hidden:depends({mode="adhoc"})
hidden:depends({mode="wds"})
bssid:depends({mode="sta"})
- mp = s:taboption("macfilter", ListValue, "macpolicy", translate("wifi_macpolicy"))
+ mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
mp:value("", translate("disable"))
- mp:value("deny", translate("wifi_whitelist"))
- mp:value("allow", translate("wifi_blacklist"))
- ml = s:taboption("macfilter", DynamicList, "maclist", translate("wifi_maclist"))
+ mp:value("deny", translate("Allow listed only"))
+ mp:value("allow", translate("Allow all except listed"))
+ ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
ml:depends({macpolicy="allow"})
ml:depends({macpolicy="deny"})
- s:taboption("advanced", Value, "rate", translate("wifi_rate"))
- s:taboption("advanced", Value, "frag", translate("wifi_frag"))
- s:taboption("advanced", Value, "rts", translate("wifi_rts"))
+ s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
+ s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
+ s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
end
------------------- WiFI-Encryption -------------------
- encr = s:taboption("encryption", ListValue, "encryption", translate("encryption"))
+ encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
encr.override_values = true
+ encr.override_depends = true
encr:depends({mode="ap"})
encr:depends({mode="sta"})
encr:depends({mode="adhoc"})
encr:depends({mode="mesh"})
encr:value("none", "No Encryption")
- encr:value("wep", "WEP")
+ encr:value("wep", "WEP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
local supplicant = fs.access("/usr/sbin/wpa_supplicant")
encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
- encr.description = translate("wifi_wpareq")
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
elseif not hostapd and supplicant then
encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
- encr.description = translate("wifi_wpareq")
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
else
- encr.description = translate("wifi_wpareq")
+ encr.description = translate(
+ "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
+ "and ad-hoc mode) to be installed."
+ )
end
elseif hwtype == "broadcom" then
encr:value("psk", "WPA-PSK")
encr:depends("mode", "sta-wds")
encr:depends("mode", "wds")
- server = s:taboption("encryption", Value, "server", translate("a_w_radiussrv"))
+ server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
server:depends({mode="ap", encryption="wpa"})
server:depends({mode="ap", encryption="wpa2"})
+ server:depends({mode="ap-wds", encryption="wpa"})
+ server:depends({mode="ap-wds", encryption="wpa2"})
server.rmempty = true
- port = s:taboption("encryption", Value, "port", translate("a_w_radiusport"))
+ port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
port:depends({mode="ap", encryption="wpa"})
port:depends({mode="ap", encryption="wpa2"})
+ port:depends({mode="ap-wds", encryption="wpa"})
+ port:depends({mode="ap-wds", encryption="wpa2"})
port.rmempty = true
- key = s:taboption("encryption", Value, "key", translate("key"))
+ key = s:taboption("encryption", Value, "key", translate("Key"))
key:depends("encryption", "wep")
key:depends("encryption", "psk")
key:depends("encryption", "psk2")
key:depends("encryption", "psk-mixed")
key:depends({mode="ap", encryption="wpa"})
key:depends({mode="ap", encryption="wpa2"})
+ key:depends({mode="ap-wds", encryption="wpa"})
+ key:depends({mode="ap-wds", encryption="wpa2"})
key.rmempty = true
key.password = true
if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
- nasid = s:taboption("encryption", Value, "nasid", translate("a_w_nasid"))
+ nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
nasid:depends({mode="ap", encryption="wpa"})
nasid:depends({mode="ap", encryption="wpa2"})
+ nasid:depends({mode="ap-wds", encryption="wpa"})
+ nasid:depends({mode="ap-wds", encryption="wpa2"})
nasid.rmempty = true
- eaptype = s:taboption("encryption", ListValue, "eap_type", translate("a_w_eaptype"))
- eaptype:value("TLS")
- eaptype:value("TTLS")
- eaptype:value("PEAP")
+ eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
+ eaptype:value("tls")
+ eaptype:value("ttls")
+ eaptype:value("peap")
eaptype:depends({mode="sta", encryption="wpa"})
eaptype:depends({mode="sta", encryption="wpa2"})
- cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("a_w_cacert"))
+ cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
cacert:depends({mode="sta", encryption="wpa"})
cacert:depends({mode="sta", encryption="wpa2"})
- privkey = s:taboption("encryption", FileUpload, "priv_key", translate("a_w_tlsprivkey"))
- privkey:depends({mode="sta", eap_type="TLS", encryption="wpa2"})
- privkey:depends({mode="sta", eap_type="TLS", encryption="wpa"})
+ privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
+ privkey:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+ privkey:depends({mode="sta", eap_type="tls", encryption="wpa"})
- privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("a_w_tlsprivkeypwd"))
- privkeypwd:depends({mode="sta", eap_type="TLS", encryption="wpa2"})
- privkeypwd:depends({mode="sta", eap_type="TLS", encryption="wpa"})
+ privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
+ privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa2"})
+ privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa"})
- auth = s:taboption("encryption", Value, "auth", translate("a_w_peapauth"))
+ auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
auth:value("PAP")
auth:value("CHAP")
auth:value("MSCHAP")
auth:value("MSCHAPV2")
- auth:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
- auth:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
- auth:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
- auth:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
-
-
- identity = s:taboption("encryption", Value, "identity", translate("a_w_peapidentity"))
- identity:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
- identity:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
- identity:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
- identity:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
-
- password = s:taboption("encryption", Value, "password", translate("a_w_peappassword"))
- password:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
- password:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
- password:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
- password:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
+ auth:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ auth:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ auth:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ auth:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+
+
+ identity = s:taboption("encryption", Value, "identity", translate("Identity"))
+ identity:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
+
+ password = s:taboption("encryption", Value, "password", translate("Password"))
+ password:depends({mode="sta", eap_type="peap", encryption="wpa2"})
+ password:depends({mode="sta", eap_type="peap", encryption="wpa"})
+ password:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
+ password:depends({mode="sta", eap_type="ttls", encryption="wpa"})
end
end
projects / project / luci.git / blobdiff