LuCI - Lua Configuration Interface
Copyright 2008 Steven Barth <steven@midlink.org>
-Copyright 2008 Jo-Philipp Wich <xm@leipzig.freifunk.net>
+Copyright 2008 Jo-Philipp Wich <xm@subsignal.org>
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
$Id$
]]--
-require("luci.tools.webadmin")
+
+local fs = require "nixio.fs"
+local nw = require "luci.model.network"
+local fw = require "luci.model.firewall"
+
arg[1] = arg[1] or ""
-m = Map("network", translate("interfaces"), translate("a_n_ifaces1"))
-s = m:section(NamedSection, arg[1], "interface")
-s.addremove = true
+local has_3g = fs.access("/usr/bin/gcom")
+local has_pptp = fs.access("/usr/sbin/pptp")
+local has_pppd = fs.access("/usr/sbin/pppd")
+local has_pppoe = fs.glob("/usr/lib/pppd/*/rp-pppoe.so")()
+local has_pppoa = fs.glob("/usr/lib/pppd/*/pppoatm.so")()
+local has_ipv6 = fs.access("/proc/net/ipv6_route")
+local has_6in4 = fs.access("/lib/network/6in4.sh")
+
+m = Map("network", translate("Interfaces") .. " - " .. arg[1]:upper(), translate("On this page you can configure the network interfaces. You can bridge several interfaces by ticking the \"bridge interfaces\" field and enter the names of several network interfaces separated by spaces. You can also use <abbr title=\"Virtual Local Area Network\">VLAN</abbr> notation <samp>INTERFACE.VLANNR</samp> (<abbr title=\"for example\">e.g.</abbr>: <samp>eth0.1</samp>)."))
+m:chain("firewall")
+m:chain("wireless")
+
+nw.init(m.uci)
+fw.init(m.uci)
+
+s = m:section(NamedSection, arg[1], "interface", translate("Common Configuration"))
+s.addremove = false
-back = s:option(DummyValue, translate("overview"))
+s:tab("general", translate("General Setup"))
+if has_ipv6 then s:tab("ipv6", translate("IPv6 Setup")) end
+if has_pppd then s:tab("ppp", translate("PPP Settings")) end
+if has_pppoa then s:tab("atm", translate("ATM Settings")) end
+if has_6in4 then s:tab("tunnel", translate("Tunnel Settings")) end
+s:tab("physical", translate("Physical Settings"))
+s:tab("firewall", translate("Firewall Settings"))
+
+st = s:taboption("general", DummyValue, "__status", translate("Status"))
+st.template = "admin_network/iface_status"
+st.network = arg[1]
+
+--[[
+back = s:taboption("general", DummyValue, "_overview", translate("Overview"))
back.value = ""
back.titleref = luci.dispatcher.build_url("admin", "network", "network")
+]]
-p = s:option(ListValue, "proto", translate("protocol"))
+p = s:taboption("general", ListValue, "proto", translate("Protocol"))
+p.override_scheme = true
+p.default = "static"
p:value("static", translate("static"))
p:value("dhcp", "DHCP")
-p:value("pppoe", "PPPoE")
-p:value("pptp", "PPTP")
-p.default = "static"
+if has_pppd then p:value("ppp", "PPP") end
+if has_pppoe then p:value("pppoe", "PPPoE") end
+if has_pppoa then p:value("pppoa", "PPPoA") end
+if has_3g then p:value("3g", "UMTS/3G") end
+if has_pptp then p:value("pptp", "PPTP") end
+if has_6in4 then p:value("6in4", "6in4") end
+p:value("none", translate("none"))
+
+if not ( has_pppd and has_pppoe and has_pppoa and has_3g and has_pptp ) then
+ p.description = translate("You need to install \"comgt\" for UMTS/GPRS, \"ppp-mod-pppoe\" for PPPoE, \"ppp-mod-pppoa\" for PPPoA or \"pptp\" for PPtP support")
+end
-br = s:option(Flag, "type", translate("a_n_i_bridge"), translate("a_n_i_bridge1"))
+br = s:taboption("physical", Flag, "type", translate("Bridge interfaces"), translate("creates a bridge over specified interface(s)"))
br.enabled = "bridge"
br.rmempty = true
+br:depends("proto", "static")
+br:depends("proto", "dhcp")
+br:depends("proto", "none")
+
+stp = s:taboption("physical", Flag, "stp", translate("Enable <abbr title=\"Spanning Tree Protocol\">STP</abbr>"),
+ translate("Enables the Spanning Tree Protocol on this bridge"))
+stp:depends("type", "1")
+stp.rmempty = true
+
+ifname_single = s:taboption("physical", Value, "ifname_single", translate("Interface"))
+ifname_single.template = "cbi/network_ifacelist"
+ifname_single.widget = "radio"
+ifname_single.nobridges = true
+ifname_single.network = arg[1]
+ifname_single.rmempty = true
+ifname_single:depends({ type = "", proto = "static" })
+ifname_single:depends({ type = "", proto = "dhcp" })
+ifname_single:depends({ type = "", proto = "pppoe" })
+ifname_single:depends({ type = "", proto = "pppoa" })
+ifname_single:depends({ type = "", proto = "none" })
+
+function ifname_single.cfgvalue(self, s)
+ return self.map.uci:get("network", s, "ifname")
+end
-ifname = s:option(Value, "ifname", translate("interface"))
-ifname.rmempty = true
-for i,d in ipairs(luci.sys.net.devices()) do
- if d ~= "lo" then
- ifname:value(d)
+function ifname_single.write(self, s, val)
+ local n = nw:get_network(s)
+ if n then
+ local i
+ for _, i in ipairs(n:get_interfaces()) do
+ n:del_interface(i)
+ end
+ n:add_interface(val)
end
end
-local zones = luci.tools.webadmin.network_get_zones(arg[1])
-if zones then
- if #zones == 0 then
- m:chain("firewall")
-
- fwzone = s:option(Value, "_fwzone",
- translate("network_interface_fwzone"),
- translate("network_interface_fwzone_desc"))
- fwzone.rmempty = true
- fwzone:value("", "- " .. translate("none") .. " -")
- fwzone:value(arg[1])
- m.uci:load("firewall")
- m.uci:foreach("firewall", "zone",
- function (section)
- fwzone:value(section.name)
- end
- )
-
- function fwzone.write(self, section, value)
- local zone = luci.tools.webadmin.firewall_find_zone(value)
- local stat
-
- if not zone then
- stat = m.uci:section("firewall", "zone", nil, {
- name = value,
- network = section
- })
- else
- local net = m.uci:get("firewall", zone, "network")
- net = (net or value) .. " " .. section
- stat = m.uci:set("firewall", zone, "network", net)
- end
-
- if stat then
- self.render = function() end
- end
+
+ifname_multi = s:taboption("physical", MultiValue, "ifname_multi", translate("Interface"))
+ifname_multi.template = "cbi/network_ifacelist"
+ifname_multi.nobridges = true
+ifname_multi.network = arg[1]
+ifname_multi.widget = "checkbox"
+ifname_multi:depends("type", "1")
+ifname_multi.cfgvalue = ifname_single.cfgvalue
+ifname_multi.write = ifname_single.write
+
+
+for _, d in ipairs(nw:get_interfaces()) do
+ if not d:is_bridge() then
+ ifname_single:value(d:name())
+ ifname_multi:value(d:name())
+ end
+end
+
+
+local fwd_to, fwd_from
+
+fwzone = s:taboption("firewall", Value, "_fwzone",
+ translate("Create / Assign firewall-zone"),
+ translate("Choose the firewall zone you want to assign to this interface. Select <em>unspecified</em> to remove the interface from the associated zone or fill out the <em>create</em> field to define a new zone and attach the interface to it."))
+
+fwzone.template = "cbi/firewall_zonelist"
+fwzone.network = arg[1]
+fwzone.rmempty = false
+
+function fwzone.cfgvalue(self, section)
+ self.iface = section
+ local z = fw:get_zone_by_network(section)
+ return z and z:name()
+end
+
+function fwzone.write(self, section, value)
+ local zone = fw:get_zone(value)
+
+ if not zone and value == '-' then
+ value = m:formvalue(self:cbid(section) .. ".newzone")
+ if value and #value > 0 then
+ zone = fw:add_zone(value)
+ else
+ fw:del_network(section)
end
- else
- fwzone = s:option(DummyValue, "_fwzone", translate("zone"))
- fwzone.value = table.concat(zones, ", ")
end
- fwzone.titleref = luci.dispatcher.build_url("admin", "network", "firewall", "zones")
- m.uci:unload("firewall")
+
+ if zone then
+ fw:del_network(section)
+ zone:add_network(section)
+ end
end
-ipaddr = s:option(Value, "ipaddr", translate("ipaddress"))
-ipaddr.rmempty = true
+ipaddr = s:taboption("general", Value, "ipaddr", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"))
+ipaddr.optional = true
+ipaddr.datatype = "ip4addr"
ipaddr:depends("proto", "static")
-nm = s:option(Value, "netmask", translate("netmask"))
-nm.rmempty = true
+nm = s:taboption("general", Value, "netmask", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"))
+nm.optional = true
+nm.datatype = "ip4addr"
nm:depends("proto", "static")
nm:value("255.255.255.0")
nm:value("255.255.0.0")
nm:value("255.0.0.0")
-gw = s:option(Value, "gateway", translate("gateway"))
+gw = s:taboption("general", Value, "gateway", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"))
+gw.optional = true
+gw.datatype = "ip4addr"
gw:depends("proto", "static")
-gw.rmempty = true
-bcast = s:option(Value, "bcast", translate("broadcast"))
-bcast:depends("proto", "static")
+bcast = s:taboption("general", Value, "bcast", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"))
bcast.optional = true
+bcast.datatype = "ip4addr"
+bcast:depends("proto", "static")
-ip6addr = s:option(Value, "ip6addr", translate("ip6address"), translate("cidr6"))
-ip6addr.optional = true
-ip6addr:depends("proto", "static")
+if has_ipv6 then
+ ip6addr = s:taboption("ipv6", Value, "ip6addr", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"), translate("<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: address/prefix"))
+ ip6addr.optional = true
+ ip6addr.datatype = "ip6addr"
+ ip6addr:depends("proto", "static")
+ ip6addr:depends("proto", "6in4")
+
+ ip6gw = s:taboption("ipv6", Value, "ip6gw", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"))
+ ip6gw.optional = true
+ ip6gw.datatype = "ip6addr"
+ ip6gw:depends("proto", "static")
+end
-ip6gw = s:option(Value, "ip6gw", translate("gateway6"))
-ip6gw:depends("proto", "static")
-ip6gw.optional = true
+dns = s:taboption("general", DynamicList, "dns", translate("<abbr title=\"Domain Name System\">DNS</abbr>-Server"),
+ translate("You can specify multiple DNS servers here, press enter to add a new entry. Servers entered here will override " ..
+ "automatically assigned ones."))
-dns = s:option(Value, "dns", translate("dnsserver"))
-dns:depends("proto", "static")
dns.optional = true
+dns.cast = "string"
+dns.datatype = "ipaddr"
+dns:depends("peerdns", "")
-mtu = s:option(Value, "mtu", "MTU")
+mtu = s:taboption("physical", Value, "mtu", "MTU")
mtu.optional = true
-mtu.isinteger = true
+mtu.datatype = "uinteger"
-mac = s:option(Value, "macaddr", translate("macaddress"))
-mac.optional = true
+srv = s:taboption("general", Value, "server", translate("<abbr title=\"Point-to-Point Tunneling Protocol\">PPTP</abbr>-Server"))
+srv:depends("proto", "pptp")
+srv.optional = false
+srv.datatype = "ip4addr"
+
+if has_6in4 then
+ peer = s:taboption("general", Value, "peeraddr", translate("Server IPv4-Address"))
+ peer.optional = false
+ peer.datatype = "ip4addr"
+ peer:depends("proto", "6in4")
+
+ ttl = s:taboption("physical", Value, "ttl", translate("TTL"))
+ ttl.default = "64"
+ ttl.optional = true
+ ttl.datatype = "uinteger"
+ ttl:depends("proto", "6in4")
+end
+mac = s:taboption("physical", Value, "macaddr", translate("<abbr title=\"Media Access Control\">MAC</abbr>-Address"))
+mac:depends("proto", "none")
+mac:depends("proto", "static")
+mac:depends("proto", "dhcp")
+
+if has_3g then
+ service = s:taboption("general", ListValue, "service", translate("Service type"))
+ service:value("", translate("-- Please choose --"))
+ service:value("umts", "UMTS/GPRS")
+ service:value("cdma", "CDMA")
+ service:value("evdo", "EV-DO")
+ service:depends("proto", "3g")
+ service.rmempty = true
+
+ apn = s:taboption("general", Value, "apn", translate("Access point (APN)"))
+ apn:depends("proto", "3g")
+
+ pincode = s:taboption("general", Value, "pincode",
+ translate("PIN code"),
+ translate("Make sure that you provide the correct pin code here or you might lock your sim card!")
+ )
+ pincode:depends("proto", "3g")
+end
-srv = s:option(Value, "server", translate("network_interface_server"))
-srv:depends("proto", "pptp")
-srv.rmempty = true
+if has_6in4 then
+ tunid = s:taboption("general", Value, "tunnelid", translate("HE.net Tunnel ID"))
+ tunid.optional = true
+ tunid.datatype = "uinteger"
+ tunid:depends("proto", "6in4")
+end
-user = s:option(Value, "username", translate("username"))
-user.rmempty = true
-user:depends("proto", "pptp")
-user:depends("proto", "pppoe")
+if has_pppd or has_pppoe or has_pppoa or has_3g or has_pptp or has_6in4 then
+ user = s:taboption("general", Value, "username", translate("Username"))
+ user.rmempty = true
+ user:depends("proto", "pptp")
+ user:depends("proto", "pppoe")
+ user:depends("proto", "pppoa")
+ user:depends("proto", "ppp")
+ user:depends("proto", "3g")
+ user:depends("proto", "6in4")
+
+ pass = s:taboption("general", Value, "password", translate("Password"))
+ pass.rmempty = true
+ pass.password = true
+ pass:depends("proto", "pptp")
+ pass:depends("proto", "pppoe")
+ pass:depends("proto", "pppoa")
+ pass:depends("proto", "ppp")
+ pass:depends("proto", "3g")
+ pass:depends("proto", "6in4")
+end
-pass = s:option(Value, "password", translate("password"))
-pass.rmempty = true
-pass:depends("proto", "pptp")
-pass:depends("proto", "pppoe")
+if has_pppd or has_pppoe or has_pppoa or has_3g or has_pptp then
+ ka = s:taboption("ppp", Value, "keepalive",
+ translate("Keep-Alive"),
+ translate("Number of failed connection tests to initiate automatic reconnect")
+ )
+ ka:depends("proto", "pptp")
+ ka:depends("proto", "pppoe")
+ ka:depends("proto", "pppoa")
+ ka:depends("proto", "ppp")
+ ka:depends("proto", "3g")
+
+ demand = s:taboption("ppp", Value, "demand",
+ translate("Automatic Disconnect"),
+ translate("Time (in seconds) after which an unused connection will be closed")
+ )
+ demand.optional = true
+ demand.datatype = "uinteger"
+ demand:depends("proto", "pptp")
+ demand:depends("proto", "pppoe")
+ demand:depends("proto", "pppoa")
+ demand:depends("proto", "ppp")
+ demand:depends("proto", "3g")
+end
-ka = s:option(Value, "keepalive",
- translate("network_interface_keepalive"),
- translate("network_interface_keepalive_desc")
-)
-ka.rmempty = true
-ka:depends("proto", "pptp")
-ka:depends("proto", "pppoe")
+if has_pppoa then
+ encaps = s:taboption("atm", ListValue, "encaps", translate("PPPoA Encapsulation"))
+ encaps:depends("proto", "pppoa")
+ encaps:value("vc", "VC-Mux")
+ encaps:value("llc", "LLC")
+
+ atmdev = s:taboption("atm", Value, "atmdev", translate("ATM device number"))
+ atmdev:depends("proto", "pppoa")
+ atmdev.default = "0"
+ atmdev.datatype = "uinteger"
+
+ vci = s:taboption("atm", Value, "vci", translate("ATM Virtual Channel Identifier (VCI)"))
+ vci:depends("proto", "pppoa")
+ vci.default = "35"
+ vci.datatype = "uinteger"
+
+ vpi = s:taboption("atm", Value, "vpi", translate("ATM Virtual Path Identifier (VPI)"))
+ vpi:depends("proto", "pppoa")
+ vpi.default = "8"
+ vpi.datatype = "uinteger"
+end
-demand = s:option(Value, "demand",
- translate("network_interface_demand"),
- translate("network_interface_demand_desc")
-)
-demand.rmempty = true
-demand:depends("proto", "pptp")
-demand:depends("proto", "pppoe")
+if has_pptp or has_pppd or has_pppoe or has_pppoa or has_3g then
+ device = s:taboption("general", Value, "device",
+ translate("Modem device"),
+ translate("The device node of your modem, e.g. /dev/ttyUSB0")
+ )
+ device:depends("proto", "ppp")
+ device:depends("proto", "3g")
+
+ defaultroute = s:taboption("ppp", Flag, "defaultroute",
+ translate("Replace default route"),
+ translate("Let pppd replace the current default route to use the PPP interface after successful connect")
+ )
+ defaultroute:depends("proto", "ppp")
+ defaultroute:depends("proto", "pppoa")
+ defaultroute:depends("proto", "pppoe")
+ defaultroute:depends("proto", "pptp")
+ defaultroute:depends("proto", "3g")
+ defaultroute.rmempty = false
+ function defaultroute.cfgvalue(...)
+ return ( AbstractValue.cfgvalue(...) or '1' )
+ end
+ peerdns = s:taboption("ppp", Flag, "peerdns",
+ translate("Use peer DNS"),
+ translate("Configure the local DNS server to use the name servers adverticed by the PPP peer")
+ )
+ peerdns:depends("proto", "ppp")
+ peerdns:depends("proto", "pppoa")
+ peerdns:depends("proto", "pppoe")
+ peerdns:depends("proto", "pptp")
+ peerdns:depends("proto", "3g")
+ peerdns.rmempty = false
+ function peerdns.cfgvalue(...)
+ return ( AbstractValue.cfgvalue(...) or '1' )
+ end
+ if has_ipv6 then
+ ipv6 = s:taboption("ppp", Flag, "ipv6", translate("Enable IPv6 on PPP link") )
+ ipv6:depends("proto", "ppp")
+ ipv6:depends("proto", "pppoa")
+ ipv6:depends("proto", "pppoe")
+ ipv6:depends("proto", "pptp")
+ ipv6:depends("proto", "3g")
+ end
+ connect = s:taboption("ppp", Value, "connect",
+ translate("Connect script"),
+ translate("Let pppd run this script after establishing the PPP link")
+ )
+ connect:depends("proto", "ppp")
+ connect:depends("proto", "pppoe")
+ connect:depends("proto", "pppoa")
+ connect:depends("proto", "pptp")
+ connect:depends("proto", "3g")
+
+ disconnect = s:taboption("ppp", Value, "disconnect",
+ translate("Disconnect script"),
+ translate("Let pppd run this script before tearing down the PPP link")
+ )
+ disconnect:depends("proto", "ppp")
+ disconnect:depends("proto", "pppoe")
+ disconnect:depends("proto", "pppoa")
+ disconnect:depends("proto", "pptp")
+ disconnect:depends("proto", "3g")
+
+ pppd_options = s:taboption("ppp", Value, "pppd_options",
+ translate("Additional pppd options"),
+ translate("Specify additional command line arguments for pppd here")
+ )
+ pppd_options:depends("proto", "ppp")
+ pppd_options:depends("proto", "pppoa")
+ pppd_options:depends("proto", "pppoe")
+ pppd_options:depends("proto", "pptp")
+ pppd_options:depends("proto", "3g")
+
+ maxwait = s:taboption("ppp", Value, "maxwait",
+ translate("Setup wait time"),
+ translate("Seconds to wait for the modem to become ready before attempting to connect")
+ )
+ maxwait:depends("proto", "3g")
+ maxwait.default = "0"
+ maxwait.optional = true
+ maxwait.datatype = "uinteger"
+end
-s2 = m:section(TypedSection, "alias", translate("aliases"))
+s2 = m:section(TypedSection, "alias", translate("IP-Aliases"))
s2.addremove = true
s2:depends("interface", arg[1])
s2.defaults.interface = arg[1]
-
+s2:tab("general", translate("General Setup"))
s2.defaults.proto = "static"
-ipaddr = s2:option(Value, "ipaddr", translate("ipaddress"))
-ipaddr.rmempty = true
+ip = s2:taboption("general", Value, "ipaddr", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Address"))
+ip.optional = true
+ip.datatype = "ip4addr"
-nm = s2:option(Value, "netmask", translate("netmask"))
-nm.rmempty = true
+nm = s2:taboption("general", Value, "netmask", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"))
+nm.optional = true
+nm.datatype = "ip4addr"
nm:value("255.255.255.0")
nm:value("255.255.0.0")
nm:value("255.0.0.0")
-gw = s2:option(Value, "gateway", translate("gateway"))
-gw.rmempty = true
+gw = s2:taboption("general", Value, "gateway", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Gateway"))
+gw.optional = true
+gw.datatype = "ip4addr"
-bcast = s2:option(Value, "bcast", translate("broadcast"))
-bcast.optional = true
+if has_ipv6 then
+ s2:tab("ipv6", translate("IPv6 Setup"))
+
+ ip6 = s2:taboption("ipv6", Value, "ip6addr", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Address"), translate("<abbr title=\"Classless Inter-Domain Routing\">CIDR</abbr>-Notation: address/prefix"))
+ ip6.optional = true
+ ip6.datatype = "ip6addr"
+
+ gw6 = s2:taboption("ipv6", Value, "ip6gw", translate("<abbr title=\"Internet Protocol Version 6\">IPv6</abbr>-Gateway"))
+ gw6.optional = true
+ gw6.datatype = "ip6addr"
+end
-ip6addr = s2:option(Value, "ip6addr", translate("ip6address"), translate("cidr6"))
-ip6addr.optional = true
+s2:tab("advanced", translate("Advanced Settings"))
-ip6gw = s2:option(Value, "ip6gw", translate("gateway6"))
-ip6gw.optional = true
+bcast = s2:taboption("advanced", Value, "bcast", translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Broadcast"))
+bcast.optional = true
+bcast.datatype = "ip4addr"
-dns = s2:option(Value, "dns", translate("dnsserver"))
+dns = s2:taboption("advanced", Value, "dns", translate("<abbr title=\"Domain Name System\">DNS</abbr>-Server"))
dns.optional = true
+dns.datatype = "ip4addr"
+
+
+m2 = Map("dhcp", "", "")
+function m2.on_parse()
+ local has_section = false
+
+ m2.uci:foreach("dhcp", "dhcp", function(s)
+ if s.interface == arg[1] then
+ has_section = true
+ return false
+ end
+ end)
+
+ if not has_section then
+ m2.uci:section("dhcp", "dhcp", nil, { interface = arg[1], ignore = "1" })
+ m2.uci:save("dhcp")
+ end
+end
+
+s = m2:section(TypedSection, "dhcp", translate("DHCP Server"))
+s.addremove = false
+s.anonymous = true
+s:tab("general", translate("General Setup"))
+s:tab("advanced", translate("Advanced Settings"))
+
+function s.filter(self, section)
+ return m2.uci:get("dhcp", section, "interface") == arg[1]
+end
+
+local ignore = s:taboption("general", Flag, "ignore",
+ translate("Ignore interface"),
+ translate("Disable <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr> for " ..
+ "this interface."))
+
+ignore.rmempty = false
+
+local start = s:taboption("general", Value, "start", translate("Start"),
+ translate("Lowest leased address as offset from the network address."))
+start.optional = true
+start.datatype = "uinteger"
+start.default = "100"
+
+local limit = s:taboption("general", Value, "limit", translate("Limit"),
+ translate("Maximum number of leased addresses."))
+limit.optional = true
+limit.datatype = "uinteger"
+limit.default = "150"
+
+local ltime = s:taboption("general", Value, "leasetime", translate("Leasetime"),
+ translate("Expiry time of leased addresses, minimum is 2 Minutes (<code>2m</code>)."))
+ltime.rmempty = true
+ltime.default = "12h"
+
+local dd = s:taboption("advanced", Flag, "dynamicdhcp",
+ translate("Dynamic <abbr title=\"Dynamic Host Configuration Protocol\">DHCP</abbr>"),
+ translate("Dynamically allocate DHCP addresses for clients. If disabled, only " ..
+ "clients having static leases will be served."))
+
+dd.rmempty = false
+function dd.cfgvalue(self, section)
+ return Flag.cfgvalue(self, section) or "1"
+end
+
+s:taboption("advanced", Flag, "force", translate("Force"),
+ translate("Force DHCP on this network even if another server is detected."))
+
+-- XXX: is this actually useful?
+--s:taboption("advanced", Value, "name", translate("Name"),
+-- translate("Define a name for this network."))
+
+mask = s:taboption("advanced", Value, "netmask",
+ translate("<abbr title=\"Internet Protocol Version 4\">IPv4</abbr>-Netmask"),
+ translate("Override the netmask sent to clients. Normally it is calculated " ..
+ "from the subnet that is served."))
+
+mask.optional = true
+mask.datatype = "ip4addr"
+
+s:taboption("advanced", DynamicList, "dhcp_option", translate("DHCP-Options"),
+ translate("Define additional DHCP options, for example \"<code>6,192.168.2.1," ..
+ "192.168.2.2</code>\" which advertises different DNS servers to clients."))
+
+for i, n in ipairs(s.children) do
+ if n ~= ignore then
+ n:depends("ignore", "")
+ end
+end
-return m
+return m, m2
projects / project / luci.git / blobdiff