+uci_applied = "The following changes have been applied"
+uci_reverted = "The following changes have been reverted"
+
a_i_ui = "User Interface"
c_lucidesc = [[LuCI is a free Lua library with integrated MVC-Webframework and webinterface for embedded devices,
usage or network interface data.]]
a_st_i_status2 = [[Also kernel or service logfiles can be viewed here to get an overview over their current state.]]
+iwscan = "WLAN-Scan"
+iwscan1 = "Wifi networks in your local environment"
+iwscan_encr = "Encr."
+iwscan_link = "Link"
+iwscan_signal = "Signal"
+iwscan_noise = "Noise"
+
+routes = "Routes"
+routes_netmask = "Netmask"
+routes_gateway = "Gateway"
+routes_metric = "Metric"
+
a_s_packages = "Software"
a_s_changepw = "Admin Password"
a_s_p_ipkg = "IPKG-Configuration"
a_w_apisolation = "AP-Isolation"
a_w_apisolation1 = "Prevents Client to Client communication"
a_w_hideessid = "Hide ESSID"
+
+dhcp_desc = "Dnsmasq is a combined DHCP-Server and DNS-Forwarder for NAT firewalls"
+dhcp_dnsmasq_domainneeded = "Domain required"
+dhcp_dnsmasq_domainneeded_desc = "Don't forward DNS-Requests without DNS-Name"
+dhcp_dnsmasq_authoritative = "Authoritative"
+dhcp_dnsmasq_authoritative_desc = "This is the only DHCP in the local network"
+dhcp_dnsmasq_boguspriv = "Filter private"
+dhcp_dnsmasq_boguspriv_desc = "Don't forward reverse lookups for local networks"
+dhcp_dnsmasq_filterwin2k = "Filter useless"
+dhcp_dnsmasq_filterwin2k_desc = "filter useless DNS-queries of Windows-systems"
+dhcp_dnsmasq_localisequeries = "Localise queries"
+dhcp_dnsmasq_localisequeries_desc = "localises the hostname depending on its subnet"
+dhcp_dnsmasq_local = "Local Server"
+dhcp_dnsmasq_domain = "Local Domain"
+dhcp_dnsmasq_expandhosts = "Expand Hosts"
+dhcp_dnsmasq_expandhosts_desc = "adds domain names to hostentries in the resolv file"
+dhcp_dnsmasq_nonegcache = "don't cache unknown"
+dhcp_dnsmasq_nonegcache_desc = "prevents caching of negative DNS-replies"
+dhcp_dnsmasq_readethers = "Use /etc/ethers"
+dhcp_dnsmasq_readethers_desc = "Read /etc/ethers to configure the DHCP-Server"
+dhcp_dnsmasq_leasefile = "Leasefile"
+dhcp_dnsmasq_leasefile_desc = "file where given DHCP-leases will be stored"
+dhcp_dnsmasq_resolvfile = "Resolvfile"
+dhcp_dnsmasq_resolvfile_desc = "local DNS file"
+dhcp_dnsmasq_nohosts = "Ignore /etc/hosts"
+dhcp_dnsmasq_strictorder = "Strict order"
+dhcp_dnsmasq_strictorder_desc = "DNS-Server will be queried in the order of the resolvfile"
+dhcp_dnsmasq_logqueries = "Log queries"
+dhcp_dnsmasq_noresolv = "Ignore resolve file"
+dhcp_dnsmasq_dnsforwardmax = "concurrent queries"
+dhcp_dnsmasq_port = "DNS-Port"
+dhcp_dnsmasq_ednspacket_max = "max. EDNS.0 paket size"
+dhcp_dnsmasq_dhcpleasemax = "max. DHCP-Leases"
+dhcp_dnsmasq_addnhosts = "additional hostfile"
+dhcp_dnsmasq_queryport = "query port"
+
+a_n_switch = "Switch"
+a_n_routes = "Routes"
+
+a_network1 = "In this area you find all network-related settings."
+a_network2 = "On most routers the network switch can be freely configured and splitted up into several VLANs."
+a_network3 = "Interfaces and PPPoE / PPTP-Settings allow a custom organisation of the network and connections to other networks like the internet."
+a_network4 = "With DHCP devices in your local network can be automatically configured for network communication."
+a_network5 = "Firewall and portforwarding can be used to secure your network while providing services to external networks."
+
+a_n_switch1 = [[The network ports on your router can be combined to several VLANs
+in which computers can communicate directly with each other.
+VLANs are often used to separate different network segments.
+Often there is by default one Uplink port for a connection to the next greater network like the internet
+and other ports for a local network.]]
+network_switch_desc = [[Ports belonging to a VLAN are separated with spaces.
+The port with the highest number (usually 5) is oftern the connection to the internal network interface of the router.
+On devices with 5 ports often the one with the lowest number (0) is the predefined Uplink port.]]
+
+a_n_ifaces1 = [[On this page you can configure the network interfaces.
+You can bridge several interfaces by ticking the "bridge interfaces" field and enter the names
+of several network interfaces separated by spaces.
+You can also use VLAN notation INTERFACE.VLANNR (e.g.: eth0.1).]]
+a_n_i_bridge = "Bridge interfaces"
+a_n_i_bridge1 = "creates a bridge over specified interface(s)"
+
+dhcp_desc = [[With DHCP network members can automatically receive
+their network settings (IP-address, netmaske, DNS-server, ...).]]
+dhcp_dhcp_leasetime = "Leasetime"
+dhcp_dhcp_dynamicdhcp = "Dynamic DHCP"
+dhcp_dhcp_ignore = "Ignore interface"
+dhcp_dhcp_ignore_desc = "disable DHCP for this interface"
+dhcp_dhcp_force = "Force"
+dhcp_dhcp_start_desc = "first address (last octet)"
+dhcp_dhcp_limit_desc = "number of leased addresses -1"
+
+a_n_ptp = "Point-to-Point Connections"
+a_n_ptp1 = [[Point-to-Point connections with PPPoE or PPTP are often used to connect a device
+over DSL or similar technologies to an internet access point.]]
+network_interface_server = "PPTP-Server"
+network_interface_demand = "Automatic Disconnect"
+network_interface_demand_desc = "Time after which an unused connection will be closed"
+network_interface_keepalive = "Keep-Alive"
+network_interface_keepalive_desc = "Reconnect lost connections"
+
+a_n_routes = "Static Routes"
+a_n_routes1 = [[With Static Routes you can specify through which
+interface and gateway a certain host or network can be reached.]]
+a_n_r_target1 = "host-IP or network"
+a_n_r_netmask1 = "if target is a network"
\ No newline at end of file
projects / project / luci.git / blobdiff