a_i_ui = "User Interface"
-c_lucidesc = [[LuCI is a free Lua library with integrated MVC-Webframework and webinterface for embedded devices,
-aspecially routers that run OpenWRT. Luci is licensed under the Apache-License.]]
+c_lucidesc = [[LuCI is a collection of free Lua software including an MVC-Webframework and webinterface for embedded devices.
+Luci is licensed under the Apache-License.]]
c_projecthome = "Project Homepage"
c_leaddev = "Lead Development"
c_contributors = "Contributing Developers"
a_i_i_admin1 = "This is the administration area of LuCI."
a_i_i_admin2 = "LuCI is a free, flexible, and user friendly graphical interface for configuring OpenWRT Kamikaze."
a_i_i_admin3 = "On the following pages you can adjust all important settings of your router."
-a_i_i_admin4 = "You will find a navigation leading to the different configuration pages on the left side."
+a_i_i_admin4 = [[Notice: In LuCI changes have to be confirmed by clicking Changes - Apply before being applied.]]
a_i_i_admin5 = [[As we are always want to improve this interface we are looking forward
to your feedback and suggestions.]]
a_i_i_admin6 = "And now have fun with your router!"
routes_gateway = "Gateway"
routes_metric = "Metric"
+a_s_desc = "Here you can configure the basic aspects of your device like its hostname or the timezone."
a_s_packages = "Software"
a_s_changepw = "Admin Password"
a_s_p_ipkg = "IPKG-Configuration"
a_s_sshkeys1 = "Here you can paste public SSH-Keys (one per line) for SSH public-key authentication."
-a_s_hostname1 = "Defines the router's hostname. The hostname is a unique name in your local network used to identify the device"
-
a_s_fstab_mountpoints = "Mount Points"
a_s_fstab_mountpoints1 = "Mount Points define at which point a memory device will be attached to the filesystem"
a_s_reboot1 = "Reboots the operating system of your device"
a_s_reboot_do = "Perform reboot"
a_s_reboot_running = "Please wait: Device rebooting..."
+a_s_reboot_u = "Warning: There are unsaved changes that will be lost while rebooting!"
+
+a_s_applyreboot1 = "Changes applied."
+
+a_s_backup = "Backup / Restore"
+a_s_backup_backup = "Create backup"
+a_s_backup_archive = "Backup Archive"
+a_s_backup_reset = "Reset router to defaults"
+a_s_backup_reset1 = "Proceed reverting all settings and resetting to firmware defaults?"
+a_s_backup_restore = "Restore backup"
+a_s_backup1 = [[Here you can backup and restore your router configuration
+and - if possible - reset the router to the default settings.]]
+
a_srv_http = "HTTP-Server"
a_srv_ssh = "SSH-Server"
a_w_apisolation = "AP-Isolation"
a_w_apisolation1 = "Prevents Client to Client communication"
a_w_hideessid = "Hide ESSID"
+a_w_ap = "Access Point"
+a_w_adhoc = "Ad-Hoc"
+a_w_ahdemo = "Pseudo Ad-Hoc (ahdemo)"
+a_w_client = "Client"
+a_w_wds = "WDS"
+a_w_monitor = "Monitor"
dhcp_desc = "Dnsmasq is a combined DHCP-Server and DNS-Forwarder for NAT firewalls"
dhcp_dnsmasq_domainneeded = "Domain required"
dhcp_dnsmasq_addnhosts = "additional hostfile"
dhcp_dnsmasq_queryport = "query port"
+a_n_switch = "Switch"
+a_n_routes = "Routes"
+
+a_network1 = "In this area you find all network-related settings."
+a_network2 = "On most routers the network switch can be freely configured and splitted up into several VLANs."
+a_network3 = "Interfaces and PPPoE / PPTP-Settings allow a custom organisation of the network and connections to other networks like the internet."
+a_network4 = "With DHCP devices in your local network can be automatically configured for network communication."
+a_network5 = "Firewall and portforwarding can be used to secure your network while providing services to external networks."
+
+a_n_switch1 = [[The network ports on your router can be combined to several VLANs
+in which computers can communicate directly with each other.
+VLANs are often used to separate different network segments.
+Often there is by default one Uplink port for a connection to the next greater network like the internet
+and other ports for a local network.]]
+network_switch_desc = [[Ports belonging to a VLAN are separated with spaces.
+The port with the highest number (usually 5) is oftern the connection to the internal network interface of the router.
+On devices with 5 ports often the one with the lowest number (0) is the predefined Uplink port.]]
+
+a_n_ifaces1 = [[On this page you can configure the network interfaces.
+You can bridge several interfaces by ticking the "bridge interfaces" field and enter the names
+of several network interfaces separated by spaces.
+You can also use VLAN notation INTERFACE.VLANNR (e.g.: eth0.1).]]
+a_n_i_bridge = "Bridge interfaces"
+a_n_i_bridge1 = "creates a bridge over specified interface(s)"
+
+dhcp_desc = [[With DHCP network members can automatically receive
+their network settings (IP-address, netmaske, DNS-server, ...).]]
+dhcp_dhcp_leasetime = "Leasetime"
+dhcp_dhcp_dynamicdhcp = "Dynamic DHCP"
+dhcp_dhcp_ignore = "Ignore interface"
+dhcp_dhcp_ignore_desc = "disable DHCP for this interface"
+dhcp_dhcp_force = "Force"
+dhcp_dhcp_start_desc = "first address (last octet)"
+dhcp_dhcp_limit_desc = "number of leased addresses -1"
+
+luci_ethers = "Static Leases"
+
+a_n_ptp = "Point-to-Point Connections"
+a_n_ptp1 = [[Point-to-Point connections with PPPoE or PPTP are often used to connect a device
+over DSL or similar technologies to an internet access point.]]
+network_interface_server = "PPTP-Server"
+network_interface_demand = "Automatic Disconnect"
+network_interface_demand_desc = "Time (in s) after which an unused connection will be closed"
+network_interface_keepalive = "Keep-Alive"
+network_interface_keepalive_desc = "Number of failed connection tests to initiate automatic reconnect"
+
+a_n_routes1 = [[Routes specify over which
+interface and gateway a certain host or network can be reached.]]
+a_n_routes_static = [[Static Routes]]
+a_n_routes_kernel4 = [[Kernel IPv4-Routes]]
+a_n_r_target1 = "host-IP or network"
+a_n_r_netmask1 = "if target is a network"
+
+m_n_local = "Local Network"
+m_n_inet = "Internet Connection"
+m_n_route = "Route"
+m_n_brdige = "Bridge"
+
+m_w_ap = "Provide (Access Point)"
+m_w_adhoc = "Independent (Ad-Hoc)"
+m_w_client = "Join (Client)"
+m_w_wds = "Distributed (WDS)"
+m_w_clientmode = "Clientmode"
+
+system_system_logsize = "System log buffer size"
+system_system_logip = "External system log server"
+system_system_conloglevel = "Log output level"
+system_system_conloglevel_desc = "Level of log messages on the console"
+
+m_i_processor = "Processor"
+m_i_memory = "Memory"
+m_i_systemtime = "Local Time"
+m_i_uptime = "Uptime"
+
+m_n_d_firstaddress = "First leased address"
+m_n_d_numleases = "Number of leased addresses"
+
+routingtable = "Routing table"
+wlanscan = "Wifi scan"
+
+frequency = "Frequency"
+power = "Power"
+noise = "Noise"
+signal = "Signal"
+link = "Link"
+frag = "Frag."
+rts = "RTS"
+bitrate = "Bitrate"
+
+m_n_keepalive = "automatically reconnect"
+m_n_dialondemand = "disconnect when idle for"
+m_n_pptp_server = "PPTP-Server"
+
+leds = "LED Configuration"
+leds_desc = "Customizes the behaviour of the device LEDs if possible."
+system_led_name = "LED Name"
+system_led_sysfs = "LED Device"
+system_led_default = "Default state"
+system_led_default_desc = "ticked = on"
+system_led_trigger = "Trigger"
+system_led_trigger_none = "None"
+system_led_trigger_defaulton = "Default On"
+system_led_trigger_timer = "Timer"
+system_led_trigger_heartbeat = "Heartbeat (Load Average)"
+system_led_trigger_netdev = "Network Device"
+system_led_delayoff = "Off-State Delay"
+system_led_delayoff_desc = "Time (in ms) the LED is off"
+system_led_delayon = "On-State Delay"
+system_led_delayon_desc = "Time (in ms) the LED is on"
+system_led_dev = "Device"
+system_led_mode = "Trigger Mode"
+system_led_mode_link = "Link On"
+system_led_mode_tx = "Transmit"
+system_led_mode_rx = "Receive"
+
+network_interface_up = "Active"
+network_interface_hwaddr = "MAC-Address"
+network_interface_hwaddr_desc = "Hardware Address"
+network_interface_txrx = "Traffic"
+network_interface_txrx_desc = "transmitted / received"
+network_interface_err = "Errors"
+network_interface_err_desc = "TX / RX"
+
+network_interface_fwzone = "Create / Assign firewall-zone"
+network_interface_fwzone_desc = "This interface does not belong to any firewall zone yet."
\ No newline at end of file
projects / project / luci.git / blobdiff