modules/admin-full: Reworked DHCP configuration

[project/luci.git] / i18n / english / luasrc / i18n / admin-core.en.lua

diff --git a/i18n/english/luasrc/i18n/admin-core.en.lua b/i18n/english/luasrc/i18n/admin-core.en.lua
index 762fc50..36c90ba 100644 (file)
--- a/i18n/english/luasrc/i18n/admin-core.en.lua
+++ b/i18n/english/luasrc/i18n/admin-core.en.lua
@@ -80,6 +80,10 @@ a_s_sshkeys1 = "Here you can paste public SSH-Keys (one per line) for SSH public
 a_s_fstab_mountpoints = "Mount Points"
 a_s_fstab_mountpoints1 = "Mount Points define at which point a memory device will be attached to the filesystem"
 
+a_s_fstab_active = "Mounted file systems"
+a_s_fstab_used = "Used"
+a_s_fstab_avail = "Available"
+
 a_s_fstab_mountpoint = "Mount Point"
 a_s_fstab_device1 = "The device file of the memory or partition (e.g. /dev/sda1)"
 a_s_fstab_fs1 = "The filesystem that was used to format the memory (e.g. ext3)"
@@ -159,8 +163,10 @@ a_w_apisolation1 = "Prevents Client to Client communication"
 a_w_hideessid = "Hide ESSID"
 a_w_ap = "Access Point"
 a_w_adhoc = "Ad-Hoc"
+a_w_ahdemo = "Pseudo Ad-Hoc (ahdemo)"
 a_w_client = "Client"
 a_w_wds = "WDS"
+a_w_monitor = "Monitor"
 
 dhcp_desc = "Dnsmasq is a combined DHCP-Server and DNS-Forwarder for NAT firewalls"
 dhcp_dnsmasq_domainneeded = "Domain required"
@@ -232,7 +238,10 @@ dhcp_dhcp_force = "Force"
 dhcp_dhcp_start_desc = "first address (last octet)"
 dhcp_dhcp_limit_desc = "number of leased addresses -1"
 
+dhcp_leases = "Leases"
 luci_ethers = "Static Leases"
+dhcp_timeremain = "Leasetime remaining"
+dhcp_leases_active = "Active Leases"
 
 a_n_ptp = "Point-to-Point Connections"
 a_n_ptp1 = [[Point-to-Point connections with PPPoE or PPTP are often used to connect a device
@@ -243,9 +252,10 @@ network_interface_demand_desc = "Time (in s) after which an unused connection wi
 network_interface_keepalive = "Keep-Alive"
 network_interface_keepalive_desc = "Number of failed connection tests to initiate automatic reconnect"
 
-a_n_routes = "Static Routes"
-a_n_routes1 = [[With Static Routes you can specify through which
+a_n_routes1 = [[Routes specify over which
 interface and gateway a certain host or network can be reached.]]
+a_n_routes_static = [[Static Routes]]
+a_n_routes_kernel4 = [[Active IPv4-Routes]]
 a_n_r_target1 = "host-IP or network"
 a_n_r_netmask1 = "if target is a network"