modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua

   1 --[[
   2 LuCI - Lua Configuration Interface
   3
   4 Copyright 2008 Steven Barth <steven@midlink.org>
   5
   6 Licensed under the Apache License, Version 2.0 (the "License");
   7 you may not use this file except in compliance with the License.
   8 You may obtain a copy of the License at
   9
  10         http://www.apache.org/licenses/LICENSE-2.0
  11
  12 $Id$
  13 ]]--
  14
  15 local wa = require "luci.tools.webadmin"
  16 local nw = require "luci.model.network"
  17 local ww = require "luci.model.wireless"
  18 local fs = require "nixio.fs"
  19
  20 arg[1] = arg[1] or ""
  21 arg[2] = arg[2] or ""
  22
  23 m = Map("wireless", "",
  24         translate("The <em>Device Configuration</em> section covers physical settings of the radio " ..
  25                 "hardware such as channel, transmit power or antenna selection which is shared among all " ..
  26                 "defined wireless networks (if the radio hardware is multi-SSID capable). Per network settings " ..
  27                 "like encryption or operation mode are grouped in the <em>Interface Configuration</em>."))
  28
  29 m:chain("network")
  30
  31 m.breadcrumb = {
  32         { luci.dispatcher.build_url("admin/network/wireless"), translate("Wireless Networks") }
  33 }
  34
  35 local ifsection
  36
  37 function m.on_commit(map)
  38         nw.init(map.uci)
  39         ww.init(map.uci)
  40
  41         local wnet = ww:get_network(arg[2])
  42         if ifsection and wnet then
  43                 ifsection.section = wnet.sid
  44         end
  45 end
  46
  47 nw.init(m.uci)
  48 ww.init(m.uci)
  49
  50 local wnet = ww:get_network(arg[2])
  51
  52 -- redirect to overview page if network does not exist anymore (e.g. after a revert)
  53 if not wnet then
  54         luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless"))
  55         return
  56 end
  57
  58 m.title = ww:get_i18n(wnet)
  59
  60
  61 local iw = nil
  62 local tx_powers = nil
  63
  64 m.uci:foreach("wireless", "wifi-iface",
  65         function(s)
  66                 if s.device == arg[1] and not iw then
  67                         iw = luci.sys.wifi.getiwinfo(s.ifname or s.device)
  68                         tx_powers = iw.txpwrlist or { }
  69                 end
  70         end)
  71
  72 s = m:section(NamedSection, arg[1], "wifi-device", translate("Device Configuration"))
  73 s.addremove = false
  74
  75 s:tab("general", translate("General Setup"))
  76 s:tab("macfilter", translate("MAC-Filter"))
  77 s:tab("advanced", translate("Advanced Settings"))
  78
  79 --[[
  80 back = s:option(DummyValue, "_overview", translate("Overview"))
  81 back.value = ""
  82 back.titleref = luci.dispatcher.build_url("admin", "network", "wireless")
  83 ]]
  84
  85 en = s:taboption("general", Flag, "disabled", translate("enable"))
  86 en.enabled = "0"
  87 en.disabled = "1"
  88 en.rmempty = false
  89
  90 function en.cfgvalue(self, section)
  91         return Flag.cfgvalue(self, section) or "0"
  92 end
  93
  94 s:taboption("general", DummyValue, "type", translate("Type"))
  95
  96 local hwtype = m:get(arg[1], "type")
  97 -- NanoFoo
  98 local nsantenna = m:get(arg[1], "antenna")
  99
 100 ch = s:taboption("general", Value, "channel", translate("Channel"))
 101 ch:value("auto", translate("auto"))
 102 for _, f in ipairs(luci.sys.wifi.channels()) do
 103         ch:value(f.channel, "%i (%.3f GHz)" %{ f.channel, f.mhz / 1000 })
 104 end
 105
 106
 107 ------------------- MAC80211 Device ------------------
 108
 109 if hwtype == "mac80211" then
 110         tp = s:taboption("general",
 111                 (tx_powers and #tx_powers > 0) and ListValue or Value,
 112                 "txpower", translate("Transmit Power"), "dBm")
 113
 114         tp.rmempty = true
 115         for _, p in ipairs(iw and iw.txpwrlist or {}) do
 116                 tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
 117         end
 118
 119         mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
 120         mode:value("", translate("auto"))
 121         mode:value("11b", "802.11b")
 122         mode:value("11g", "802.11g")
 123         mode:value("11a", "802.11a")
 124         mode:value("11ng", "802.11g+n")
 125         mode:value("11na", "802.11a+n")
 126
 127         htmode = s:taboption("advanced", ListValue, "htmode", translate("HT mode"))
 128         htmode:depends("hwmode", "11na")
 129         htmode:depends("hwmode", "11ng")
 130         htmode:value("HT20", "20MHz")
 131         htmode:value("HT40-", translate("40MHz 2nd channel below"))
 132         htmode:value("HT40+", translate("40MHz 2nd channel above"))
 133
 134         --htcapab = s:taboption("advanced", DynamicList, "ht_capab", translate("HT capabilities"))
 135         --htcapab:depends("hwmode", "11na")
 136         --htcapab:depends("hwmode", "11ng")
 137
 138         s:taboption("advanced", Value, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
 139         s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
 140                 translate("Distance to farthest network member in meters."))
 141 end
 142
 143
 144 ------------------- Madwifi Device ------------------
 145
 146 if hwtype == "atheros" then
 147         tp = s:taboption("general",
 148                 (#tx_powers > 0) and ListValue or Value,
 149                 "txpower", translate("Transmit Power"), "dBm")
 150
 151         tp.rmempty = true
 152         for _, p in ipairs(iw.txpwrlist) do
 153                 tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
 154         end
 155
 156         mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
 157         mode:value("", translate("auto"))
 158         mode:value("11b", "802.11b")
 159         mode:value("11g", "802.11g")
 160         mode:value("11a", "802.11a")
 161         mode:value("11bg", "802.11b+g")
 162         mode:value("11gst", "802.11g + Turbo")
 163         mode:value("11ast", "802.11a + Turbo")
 164         mode:value("fh", translate("Frequency Hopping"))
 165
 166         s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
 167
 168         if not nsantenna then
 169                 ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
 170                 ant1.widget = "radio"
 171                 ant1.orientation = "horizontal"
 172                 ant1:depends("diversity", "")
 173                 ant1:value("0", translate("auto"))
 174                 ant1:value("1", translate("Antenna 1"))
 175                 ant1:value("2", translate("Antenna 2"))
 176
 177                 ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
 178                 ant2.widget = "radio"
 179                 ant2.orientation = "horizontal"
 180                 ant2:depends("diversity", "")
 181                 ant2:value("0", translate("auto"))
 182                 ant2:value("1", translate("Antenna 1"))
 183                 ant2:value("2", translate("Antenna 2"))
 184
 185         else -- NanoFoo
 186                 local ant = s:taboption("advanced", ListValue, "antenna", translate("Transmitter Antenna"))
 187                 ant:value("auto")
 188                 ant:value("vertical")
 189                 ant:value("horizontal")
 190                 ant:value("external")
 191         end
 192
 193         s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
 194                 translate("Distance to farthest network member in meters."))
 195         s:taboption("advanced", Value, "regdomain", translate("Regulatory Domain"))
 196         s:taboption("advanced", Value, "country", translate("Country Code"))
 197         s:taboption("advanced", Flag, "outdoor", translate("Outdoor Channels"))
 198
 199         --s:option(Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
 200 end
 201
 202
 203
 204 ------------------- Broadcom Device ------------------
 205
 206 if hwtype == "broadcom" then
 207         tp = s:taboption("general",
 208                 (#tx_powers > 0) and ListValue or Value,
 209                 "txpower", translate("Transmit Power"), "dBm")
 210
 211         tp.rmempty = true
 212         for _, p in ipairs(iw.txpwrlist) do
 213                 tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
 214         end
 215
 216         mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
 217         mode:value("11bg", "802.11b+g")
 218         mode:value("11b", "802.11b")
 219         mode:value("11g", "802.11g")
 220         mode:value("11gst", "802.11g + Turbo")
 221
 222         mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
 223         mp:value("", translate("disable"))
 224         mp:value("allow", translate("Allow listed only"))
 225         mp:value("deny", translate("Allow all except listed"))
 226         ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 227         ml:depends({macfilter="allow"})
 228         ml:depends({macfilter="deny"})
 229
 230         ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
 231         ant1.widget = "radio"
 232         ant1:depends("diversity", "")
 233         ant1:value("3", translate("auto"))
 234         ant1:value("0", translate("Antenna 1"))
 235         ant1:value("1", translate("Antenna 2"))
 236
 237         ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
 238         ant2.widget = "radio"
 239         ant2:depends("diversity", "")
 240         ant2:value("3", translate("auto"))
 241         ant2:value("0", translate("Antenna 1"))
 242         ant2:value("1", translate("Antenna 2"))
 243
 244         s:taboption("advanced", Flag, "frameburst", translate("Frame Bursting"))
 245
 246         s:taboption("advanced", Value, "distance", translate("Distance Optimization"))
 247         --s:option(Value, "slottime", translate("Slot time"))
 248
 249         s:taboption("advanced", Value, "country", translate("Country Code"))
 250         s:taboption("advanced", Value, "maxassoc", translate("Connection Limit"))
 251 end
 252
 253
 254 --------------------- HostAP Device ---------------------
 255
 256 if hwtype == "prism2" then
 257         s:taboption("advanced", Value, "txpower", translate("Transmit Power"), "att units").rmempty = true
 258
 259         s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
 260
 261         s:taboption("advanced", Value, "txantenna", translate("Transmitter Antenna"))
 262         s:taboption("advanced", Value, "rxantenna", translate("Receiver Antenna"))
 263 end
 264
 265
 266 ----------------------- Interface -----------------------
 267
 268 local wnet = ww:get_network(arg[2])
 269
 270 if wnet then
 271         s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
 272         ifsection = s
 273         s.addremove = false
 274         s.anonymous = true
 275         s.defaults.device = arg[1]
 276
 277         s:tab("general", translate("General Setup"))
 278         s:tab("encryption", translate("Wireless Security"))
 279         s:tab("macfilter", translate("MAC-Filter"))
 280         s:tab("advanced", translate("Advanced Settings"))
 281
 282         s:taboption("general", Value, "ssid", translate("<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 283
 284         mode = s:taboption("general", ListValue, "mode", translate("Mode"))
 285         mode.override_values = true
 286         mode:value("ap", translate("Access Point"))
 287         mode:value("sta", translate("Client"))
 288         mode:value("adhoc", translate("Ad-Hoc"))
 289
 290         bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"))
 291
 292         network = s:taboption("general", Value, "network", translate("Network"),
 293                 translate("Choose the network you want to attach to this wireless interface. " ..
 294                         "Select <em>unspecified</em> to not attach any network or fill out the " ..
 295                         "<em>create</em> field to define a new network."))
 296
 297         network.rmempty = true
 298         network.template = "cbi/network_netlist"
 299         network.widget = "radio"
 300
 301         function network.write(self, section, value)
 302                 local i = nw:get_interface(section)
 303                 if i then
 304                         if value == '-' then
 305                                 value = m:formvalue(self:cbid(section) .. ".newnet")
 306                                 if value and #value > 0 then
 307                                         local n = nw:add_network(value, {type="bridge", proto="none"})
 308                                         if n then n:add_interface(i) end
 309                                 else
 310                                         local n = i:get_network()
 311                                         if n then n:del_interface(i) end
 312                                 end
 313                         else
 314                                 local n = nw:get_network(value)
 315                                 if n then
 316                                         n:type("bridge")
 317                                         n:add_interface(i)
 318                                 end
 319                         end
 320                 end
 321         end
 322
 323         -------------------- MAC80211 Interface ----------------------
 324
 325         if hwtype == "mac80211" then
 326                 if fs.access("/usr/sbin/iw") then
 327                         mode:value("mesh", "802.11s")
 328                 end
 329
 330                 mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
 331                 mode:value("monitor", translate("Monitor"))
 332                 bssid:depends({mode="adhoc"})
 333
 334                 s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 335                 s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 336
 337                 mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
 338                 mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
 339
 340                 function mode.write(self, section, value)
 341                         if value == "ap-wds" then
 342                                 ListValue.write(self, section, "ap")
 343                                 m.uci:set("wireless", section, "wds", 1)
 344                         elseif value == "sta-wds" then
 345                                 ListValue.write(self, section, "sta")
 346                                 m.uci:set("wireless", section, "wds", 1)
 347                         else
 348                                 ListValue.write(self, section, value)
 349                                 m.uci:delete("wireless", section, "wds")
 350                         end
 351                 end
 352
 353                 function mode.cfgvalue(self, section)
 354                         local mode = ListValue.cfgvalue(self, section)
 355                         local wds  = m.uci:get("wireless", section, "wds") == "1"
 356
 357                         if mode == "ap" and wds then
 358                                 return "ap-wds"
 359                         elseif mode == "sta" and wds then
 360                                 return "sta-wds"
 361                         else
 362                                 return mode
 363                         end
 364                 end
 365
 366                 hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 367                 hidden:depends({mode="ap"})
 368                 hidden:depends({mode="ap-wds"})
 369         end
 370
 371
 372
 373         -------------------- Madwifi Interface ----------------------
 374
 375         if hwtype == "atheros" then
 376                 mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
 377                 mode:value("monitor", translate("Monitor"))
 378                 mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
 379                 mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
 380                 mode:value("wds", translate("Static WDS"))
 381
 382                 function mode.write(self, section, value)
 383                         if value == "ap-wds" then
 384                                 ListValue.write(self, section, "ap")
 385                                 m.uci:set("wireless", section, "wds", 1)
 386                         elseif value == "sta-wds" then
 387                                 ListValue.write(self, section, "sta")
 388                                 m.uci:set("wireless", section, "wds", 1)
 389                         else
 390                                 ListValue.write(self, section, value)
 391                                 m.uci:delete("wireless", section, "wds")
 392                         end
 393                 end
 394
 395                 function mode.cfgvalue(self, section)
 396                         local mode = ListValue.cfgvalue(self, section)
 397                         local wds  = m.uci:get("wireless", section, "wds") == "1"
 398
 399                         if mode == "ap" and wds then
 400                                 return "ap-wds"
 401                         elseif mode == "sta" and wds then
 402                                 return "sta-wds"
 403                         else
 404                                 return mode
 405                         end
 406                 end
 407
 408                 bssid:depends({mode="adhoc"})
 409                 bssid:depends({mode="ahdemo"})
 410                 bssid:depends({mode="wds"})
 411
 412                 wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
 413                 wdssep:depends({mode="ap-wds"})
 414
 415                 s:taboption("advanced", Flag, "doth", "802.11h")
 416                 hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 417                 hidden:depends({mode="ap"})
 418                 hidden:depends({mode="adhoc"})
 419                 hidden:depends({mode="ap-wds"})
 420                 hidden:depends({mode="sta-wds"})
 421                 isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
 422                  translate("Prevents client-to-client communication"))
 423                 isolate:depends({mode="ap"})
 424                 s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
 425
 426                 mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
 427                 mp:value("", translate("disable"))
 428                 mp:value("deny", translate("Allow listed only"))
 429                 mp:value("allow", translate("Allow all except listed"))
 430                 ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 431                 ml:depends({macpolicy="allow"})
 432                 ml:depends({macpolicy="deny"})
 433
 434                 s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
 435                 s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
 436                 s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 437                 s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 438                 s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
 439                 s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
 440                 s:taboption("advanced", Flag, "compression", translate("Compression"))
 441
 442                 s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
 443                 s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
 444                 s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
 445
 446                 s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
 447                 s:taboption("advanced", Flag, "xr", translate("XR Support"))
 448                 s:taboption("advanced", Flag, "ar", translate("AR Support"))
 449
 450                 local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
 451                 swm:depends({mode="adhoc"})
 452
 453                 local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
 454                 nos:depends({mode="sta"})
 455                 nos:depends({mode="sta-wds"})
 456
 457                 local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
 458                 probereq.enabled  = "0"
 459                 probereq.disabled = "1"
 460         end
 461
 462
 463         -------------------- Broadcom Interface ----------------------
 464
 465         if hwtype == "broadcom" then
 466                 mode:value("wds", translate("WDS"))
 467                 mode:value("monitor", translate("Monitor"))
 468
 469                 hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 470                 hidden:depends({mode="ap"})
 471                 hidden:depends({mode="adhoc"})
 472                 hidden:depends({mode="wds"})
 473
 474                 isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
 475                  translate("Prevents client-to-client communication"))
 476                 isolate:depends({mode="ap"})
 477
 478                 s:taboption("advanced", Flag, "doth", "802.11h")
 479                 s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
 480
 481                 bssid:depends({mode="wds"})
 482                 bssid:depends({mode="adhoc"})
 483         end
 484
 485
 486         ----------------------- HostAP Interface ---------------------
 487
 488         if hwtype == "prism2" then
 489                 mode:value("wds", translate("WDS"))
 490                 mode:value("monitor", translate("Monitor"))
 491
 492                 hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 493                 hidden:depends({mode="ap"})
 494                 hidden:depends({mode="adhoc"})
 495                 hidden:depends({mode="wds"})
 496
 497                 bssid:depends({mode="sta"})
 498
 499                 mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
 500                 mp:value("", translate("disable"))
 501                 mp:value("deny", translate("Allow listed only"))
 502                 mp:value("allow", translate("Allow all except listed"))
 503                 ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 504                 ml:depends({macpolicy="allow"})
 505                 ml:depends({macpolicy="deny"})
 506
 507                 s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
 508                 s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 509                 s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 510         end
 511
 512
 513         ------------------- WiFI-Encryption -------------------
 514
 515         encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
 516         encr.override_values = true
 517         encr.override_depends = true
 518         encr:depends({mode="ap"})
 519         encr:depends({mode="sta"})
 520         encr:depends({mode="adhoc"})
 521         encr:depends({mode="ahdemo"})
 522         encr:depends({mode="ap-wds"})
 523         encr:depends({mode="sta-wds"})
 524         encr:depends({mode="mesh"})
 525
 526         encr:value("none", "No Encryption")
 527         encr:value("wep", "WEP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 528
 529         if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
 530                 local supplicant = fs.access("/usr/sbin/wpa_supplicant")
 531                 local hostapd = fs.access("/usr/sbin/hostapd")
 532
 533                 if hostapd and supplicant then
 534                         encr:value("psk", "WPA-PSK")
 535                         encr:value("psk2", "WPA2-PSK")
 536                         encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode")
 537                         encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 538                         encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"})
 539                 elseif hostapd and not supplicant then
 540                         encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
 541                         encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
 542                         encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
 543                         encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
 544                         encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
 545                         encr.description = translate(
 546                                 "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 547                                 "and ad-hoc mode) to be installed."
 548                         )
 549                 elseif not hostapd and supplicant then
 550                         encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
 551                         encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
 552                         encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
 553                         encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
 554                         encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
 555                         encr.description = translate(
 556                                 "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 557                                 "and ad-hoc mode) to be installed."
 558                         )
 559                 else
 560                         encr.description = translate(
 561                                 "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 562                                 "and ad-hoc mode) to be installed."
 563                         )
 564                 end
 565         elseif hwtype == "broadcom" then
 566                 encr:value("psk", "WPA-PSK")
 567                 encr:value("psk2", "WPA2-PSK")
 568                 encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
 569         end
 570
 571         encr:depends("mode", "ap")
 572         encr:depends("mode", "sta")
 573         encr:depends("mode", "ap-wds")
 574         encr:depends("mode", "sta-wds")
 575         encr:depends("mode", "wds")
 576
 577         server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
 578         server:depends({mode="ap", encryption="wpa"})
 579         server:depends({mode="ap", encryption="wpa2"})
 580         server:depends({mode="ap-wds", encryption="wpa"})
 581         server:depends({mode="ap-wds", encryption="wpa2"})
 582         server.rmempty = true
 583
 584         port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
 585         port:depends({mode="ap", encryption="wpa"})
 586         port:depends({mode="ap", encryption="wpa2"})
 587         port:depends({mode="ap-wds", encryption="wpa"})
 588         port:depends({mode="ap-wds", encryption="wpa2"})
 589         port.rmempty = true
 590
 591         key = s:taboption("encryption", Value, "key", translate("Key"))
 592         key:depends("encryption", "wep")
 593         key:depends("encryption", "psk")
 594         key:depends("encryption", "psk2")
 595         key:depends("encryption", "psk+psk2")
 596         key:depends("encryption", "psk-mixed")
 597         key:depends({mode="ap", encryption="wpa"})
 598         key:depends({mode="ap", encryption="wpa2"})
 599         key:depends({mode="ap-wds", encryption="wpa"})
 600         key:depends({mode="ap-wds", encryption="wpa2"})
 601         key.rmempty = true
 602         key.password = true
 603
 604         if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
 605                 nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
 606                 nasid:depends({mode="ap", encryption="wpa"})
 607                 nasid:depends({mode="ap", encryption="wpa2"})
 608                 nasid:depends({mode="ap-wds", encryption="wpa"})
 609                 nasid:depends({mode="ap-wds", encryption="wpa2"})
 610                 nasid.rmempty = true
 611
 612                 eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
 613                 eaptype:value("TLS")
 614                 eaptype:value("TTLS")
 615                 eaptype:value("PEAP")
 616                 eaptype:depends({mode="sta", encryption="wpa"})
 617                 eaptype:depends({mode="sta", encryption="wpa2"})
 618
 619                 cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
 620                 cacert:depends({mode="sta", encryption="wpa"})
 621                 cacert:depends({mode="sta", encryption="wpa2"})
 622
 623                 privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
 624                 privkey:depends({mode="sta", eap_type="TLS", encryption="wpa2"})
 625                 privkey:depends({mode="sta", eap_type="TLS", encryption="wpa"})
 626
 627                 privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
 628                 privkeypwd:depends({mode="sta", eap_type="TLS", encryption="wpa2"})
 629                 privkeypwd:depends({mode="sta", eap_type="TLS", encryption="wpa"})
 630
 631
 632                 auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
 633                 auth:value("PAP")
 634                 auth:value("CHAP")
 635                 auth:value("MSCHAP")
 636                 auth:value("MSCHAPV2")
 637                 auth:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
 638                 auth:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
 639                 auth:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
 640                 auth:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
 641
 642
 643                 identity = s:taboption("encryption", Value, "identity", translate("Identity"))
 644                 identity:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
 645                 identity:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
 646                 identity:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
 647                 identity:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
 648
 649                 password = s:taboption("encryption", Value, "password", translate("Password"))
 650                 password:depends({mode="sta", eap_type="PEAP", encryption="wpa2"})
 651                 password:depends({mode="sta", eap_type="PEAP", encryption="wpa"})
 652                 password:depends({mode="sta", eap_type="TTLS", encryption="wpa2"})
 653                 password:depends({mode="sta", eap_type="TTLS", encryption="wpa"})
 654         end
 655 end
 656
 657 return m