From f7c06ff052646a4654a355729ea5d57e2a393068 Mon Sep 17 00:00:00 2001 From: hauke Date: Sun, 28 Apr 2013 17:57:30 +0000 Subject: [PATCH] mac80211: b43: only use gpio 0 and 1 for the wifi led sometimes b43 truned the gpio for the switch reset on. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36476 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../patches/845-b43-only-use-gpio-0-1-for-led.patch | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 package/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch diff --git a/package/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch b/package/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch new file mode 100644 index 0000000000..35d774492e --- /dev/null +++ b/package/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch @@ -0,0 +1,17 @@ +--- a/drivers/net/wireless/b43/main.c ++++ b/drivers/net/wireless/b43/main.c +@@ -2757,6 +2757,14 @@ static int b43_gpio_init(struct b43_wlde + } else if (dev->dev->chip_id == 0x5354) { + /* Don't allow overtaking buttons GPIOs */ + set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */ ++ } else if (dev->dev->chip_id == BCMA_CHIP_ID_BCM4716 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM47162 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM5356 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM5357 || ++ dev->dev->chip_id == BCMA_CHIP_ID_BCM53572) { ++ /* just use gpio 0 and 1 for 2.4 GHz wifi led */ ++ set &= 0x3; ++ mask &= 0x3; + } + + if (0 /* FIXME: conditional unknown */ ) { -- 2.11.0