From eeeca92b28d07f08a5e9f87b67ea81225dd0d7da Mon Sep 17 00:00:00 2001 From: blogic Date: Thu, 10 Mar 2016 19:11:57 +0000 Subject: [PATCH] ramips: Add support for GL-MT300A This patches adds support for GL-MT300A. GL-MT300A is powered by MT7620A. It has 16MB flash, 128MB RAM, Two LANs, USB, UART and MMC daughter board. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48992 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ramips/base-files/etc/board.d/01_leds | 3 + .../linux/ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/GL-MT300A.dts | 164 +++++++++++++++++++++ target/linux/ramips/image/Makefile | 2 + target/linux/ramips/mt7620/profiles/gli.mk | 16 ++ 7 files changed, 190 insertions(+) create mode 100644 target/linux/ramips/dts/GL-MT300A.dts create mode 100644 target/linux/ramips/mt7620/profiles/gli.mk diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 8fd50fedc7..536a363d92 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -137,6 +137,9 @@ fonera20n) set_usb_led "$board:orange:usb" set_wifi_led "$board:orange:wifi" ;; +gl-mt300a) + set_wifi_led "$board:wlan" + ;; hc5661) ucidef_set_led_default "system" "system" "$board:blue:system" "1" ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index ac5a312d84..74599adf5d 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -113,6 +113,7 @@ ramips_setup_interfaces() dir-860l-b1|\ f5d8235-v1|\ f5d8235-v2|\ + gl-mt300a|\ hg255d|\ mzk-wdpr|\ jhr-n805r|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 3fdb5627e3..ba27c1436d 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -175,6 +175,9 @@ ramips_board_detect() { *"FreeStation5") name="freestation5" ;; + *"GL-MT300A") + name="gl-mt300a" + ;; *"HC5661") name="hc5661" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index e01f9ce7f6..876416ea81 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -56,6 +56,7 @@ platform_check_image() { firewrt|\ fonera20n|\ freestation5|\ + gl-mt300a|\ hc5*61|\ hg255d|\ hlk-rm04|\ diff --git a/target/linux/ramips/dts/GL-MT300A.dts b/target/linux/ramips/dts/GL-MT300A.dts new file mode 100644 index 0000000000..c1eb0a9818 --- /dev/null +++ b/target/linux/ramips/dts/GL-MT300A.dts @@ -0,0 +1,164 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "GL-MT300A", "ralink,mt7620a-soc"; + model = "GL-MT300A"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + gpio0: gpio@600 { + status = "okay"; + }; + + gpio1: gpio@638 { + status = "okay"; + }; + + gpio2: gpio@660 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q128"; + reg = <0 0>; + linux,modalias = "m25p80", "w25q128"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xf80000>; + }; + + partition@ff0000 { + label = "art"; + reg = <0xff0000 0x10000>; + }; + }; + }; + }; + + sdhci@10130000 { + status = "okay"; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + ethernet@10100000 { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4000>; + ralink,port-map = "wllll"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + pcie@10140000 { + status = "okay"; + + pcie-bridge { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wled","ephy","uartf","i2c"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wan { + label = "gl-mt300a:wan"; + gpios = <&gpio2 0 1>; + }; + + lan { + label = "gl-mt300a:lan"; + gpios = <&gpio2 1 1>; + }; + + wlan { + label = "gl-mt300a:wlan"; + gpios = <&gpio3 0 1>; + }; + + usb { + label = "gl-mt300a:usb"; + gpios = <&gpio0 7 1>; + }; + + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 13 1>; + linux,code = <0x198>; + }; + + BTN_0 { + label = "BTN_0"; + gpios = <&gpio0 1 1>; + linux,code = <0x100>; + }; + + BTN_1 { + label = "BTN_1"; + gpios = <&gpio0 2 1>; + linux,code = <0x101>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index e85c57470b..fb7407b5ba 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -993,6 +993,7 @@ Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT- Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE) Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020) Image/Build/Profile/MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),miwifi-mini,MIWIFI-MINI) +Image/Build/Profile/GL-MT300A=$(call BuildFirmware/Default16M/$(1),$(1),gl-mt300a,GL-MT300A) Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7) Image/Build/Profile/YOUKU-YK1=$(call BuildFirmware/Default16M/$(1),$(1),youku-yk1,YOUKU-YK1) Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) @@ -1036,6 +1037,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/WRTNODE,$(1)) $(call Image/Build/Profile/WT3020,$(1)) $(call Image/Build/Profile/MIWIFI-MINI,$(1)) + $(call Image/Build/Profile/GL-MT300A,$(1)) $(call Image/Build/Profile/ZTE-Q7,$(1)) $(call Image/Build/Profile/YOUKU-YK1,$(1)) $(call Image/Build/Profile/ZBT-WA05,$(1)) diff --git a/target/linux/ramips/mt7620/profiles/gli.mk b/target/linux/ramips/mt7620/profiles/gli.mk new file mode 100644 index 0000000000..53e2e9d578 --- /dev/null +++ b/target/linux/ramips/mt7620/profiles/gli.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/GL-MT300A + NAME:=GL-MT300A + PACKAGES:=kmod-usb-core kmod-usb-dwc2 kmod-usb2 kmod-usb-ohci kmod-mt76 +endef + +define Profile/GL-MT300A/Description + Support for gl-mt300a Router +endef +$(eval $(call Profile,GL-MT300A)) -- 2.11.0