From cf0567e461d42d34a00c1b4a129526c6967266c9 Mon Sep 17 00:00:00 2001
From: luka <luka@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Thu, 18 Dec 2014 18:38:38 +0000
Subject: [PATCH] kirkwood: set default EA4500 switch config

This maps the LAN ports to eth0 and WAN port to eth1.
Since there are two interfaces the 802.1q VLAN mode
is unnecessary and left disabled. Port-based VLANs
are used instead.

Signed-off-by: Claudio Leite <leitec@staticky.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43750 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
 .../kirkwood/base-files/etc/uci-defaults/02_network      | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/target/linux/kirkwood/base-files/etc/uci-defaults/02_network b/target/linux/kirkwood/base-files/etc/uci-defaults/02_network
index bc7e793db5..5b79687784 100644
--- a/target/linux/kirkwood/base-files/etc/uci-defaults/02_network
+++ b/target/linux/kirkwood/base-files/etc/uci-defaults/02_network
@@ -20,6 +20,19 @@ set network.lan6.reqprefix='no'
 EOF
 }
 
+add_port_based_vlan() {
+	local device=$1
+	local vlan=$2
+	local ports=$3
+	uci batch <<EOF
+add network switch_vlan
+set network.@switch_vlan[-1].device='$device'
+set network.@switch_vlan[-1].vlan='$vlan'
+set network.@switch_vlan[-1].ports='$ports'
+set network.@switch_vlan[-1].port_based='1'
+EOF
+}
+
 . /lib/functions/uci-defaults.sh
 . /lib/kirkwood.sh
 
@@ -45,6 +58,9 @@ case "$board" in
 	;;
 "ea4500")
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	ucidef_add_switch "switch0" "1" "0"
+	add_port_based_vlan "switch0" "1" "0 1 2 3 5"
+	add_port_based_vlan "switch0" "2" "4 6"
 	;;
 *)
 	ucidef_set_interface_lan "eth0"
-- 
2.11.0