From a151168be27d24c80e5bb959040bae801965dbcf Mon Sep 17 00:00:00 2001 From: blogic Date: Thu, 25 Apr 2013 19:02:42 +0000 Subject: [PATCH] ramips: sync kernel patches with the mips-next tree Signed-off-by: John Crispin git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36431 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- ...ips_-set-get-_machine_name-to-a-more-gene.patch | 154 +++++ ...=> 0101-MIPS-ralink-add-PCI-IRQ-handling.patch} | 11 +- ...-MIPS-ralink-add-RT3352-register-defines.patch} | 21 +- ... 0103-MIPS-ralink-fix-RT305x-clock-setup.patch} | 32 +- ...ralink-add-missing-comment-in-irq-driver.patch} | 8 +- .../0105-MIPS-extend-RT3050-dtsi-file.patch | 159 ----- ...ralink-add-RT5350-sdram-register-defines.patch} | 6 +- .../0106-MIPS-add-RT5350-dtsi-file.patch | 198 ------ ...-ralink-make-early_printk-work-on-RT2880.patch} | 6 +- ...link-rename-gpio_pinmux-to-rt_gpio_pinmux.patch | 36 + .../0108-MIPS-add-rt2880-dts-files.patch | 210 ------ ...-make-the-RT305x-pinmuxing-structure-stat.patch | 44 ++ ...ink-add-pci-group-to-struct-ralink_pinmux.patch | 26 + .../0110-MIPS-add-rt3883-dts-files.patch | 282 -------- ...ink-add-uart-mask-to-struct-ralink_pinmux.patch | 49 ++ ...alink-adds-support-for-RT2880-SoC-family.patch} | 24 +- .../0112-MIPS-add-MT7620-dts-files.patch | 204 ------ ...alink-adds-support-for-RT3883-SoC-family.patch} | 59 +- ...alink-adds-support-for-MT7620-SoC-family.patch} | 95 +-- ...4-MIPS-ralink-add-cpu-feature-overrides.h.patch | 218 ++++++ .../0115-DT-add-vendor-prefixes-for-Ralink.patch | 21 + ...dd-documentation-for-the-Ralink-MIPS-SoCs.patch | 38 ++ ...-ralink-clean-up-RT3050-dtsi-and-dts-file.patch | 117 ++++ .../0118-DT-MIPS-ralink-add-RT2880-dts-files.patch | 147 +++++ .../0119-DT-MIPS-ralink-add-RT3883-dts-files.patch | 118 ++++ .../0119-PCI-MIPS-adds-rt3883-pci-support.patch | 525 --------------- ...0120-DT-MIPS-ralink-add-MT7620A-dts-files.patch | 119 ++++ .../0121-MIPS-add-detect_memory_region.patch | 61 ++ ...-add-memory-definition-to-struct-ralink_s.patch | 29 + ...S-ralink-add-memory-definition-for-RT305x.patch | 89 +++ ...23-MIPS-ralink-fix-uartmux-group-handling.patch | 40 -- ...S-ralink-add-memory-definition-for-RT2880.patch | 36 + ...ink-add-pci-group-to-struct-ralink_pinmux.patch | 24 - ...S-ralink-add-memory-definition-for-RT3883.patch | 36 + ...0125-MIPS-ralink-process-PCI-pinmux-group.patch | 42 -- ...PS-ralink-add-PCI-pinmux-group-for-RT3883.patch | 58 -- ...S-ralink-add-memory-definition-for-MT7620.patch | 58 ++ ...-add-GPIO-mode-to-RT3883-UART-pinmux-grou.patch | 24 - ...-make-use-of-the-new-memory-detection-cod.patch | 40 ++ ...-add-cpu-feature-overrides.h-for-RT288x-S.patch | 82 --- ...ch => 0128-MIPS-ralink-add-pinmux-driver.patch} | 68 +- ...-add-cpu-feature-overrides.h-for-RT3x5x-R.patch | 82 --- ...alink-add-support-for-periodic-timer-irq.patch} | 4 +- ...PIO-MIPS-ralink-adds-ralink-gpio-support.patch} | 4 +- ...-add-cpu-feature-overrides.h-for-RT3662-3.patch | 81 --- ...131-SPI-ralink-add-Ralink-SoC-spi-driver.patch} | 6 +- .../0132-NET-ramips-fix-mdio-bus-support.patch | 222 ------- ...-allow-au1x00-and-rt288x-to-load-from-OF.patch} | 4 +- ...=> 0133-serial-ralink-adds-mt7620-serial.patch} | 4 +- ...=> 0134-PCI-MIPS-adds-rt2880-pci-support.patch} | 4 +- ...=> 0135-PCI-MIPS-adds-rt3883-pci-support.patch} | 734 ++++++++------------- ...-NET-MIPS-add-ralink-SoC-ethernet-driver.patch} | 148 ++--- ...t.patch => 0137-watchdog-adds-ralink-wdt.patch} | 6 +- ...he-mips_machine-name-from-OF-and-output-i.patch | 98 --- ...owrt-MIPS-ralink-add-usb-platform-support.patch | 8 +- .../0205-owrt-MIPS-add-OWRTDTB-secion.patch | 8 +- ...alink-add-support-for-runtime-memory-dete.patch | 176 ----- ...-add-GPIO-mode-to-RT305x-UART-pinmux-grou.patch | 14 - 58 files changed, 1985 insertions(+), 3232 deletions(-) create mode 100644 target/linux/ramips/patches-3.8/0100-MIPS-move-mips_-set-get-_machine_name-to-a-more-gene.patch rename target/linux/ramips/patches-3.8/{0122-MIPS-ralink-handle-PCI-interrupts-as-well.patch => 0101-MIPS-ralink-add-PCI-IRQ-handling.patch} (68%) rename target/linux/ramips/patches-3.8/{0103-MIPS-ralink-add-RT3352-usb-register-defines.patch => 0102-MIPS-ralink-add-RT3352-register-defines.patch} (59%) rename target/linux/ramips/patches-3.8/{0100-MIPS-ralink-fix-RT305x-clock-setup.patch => 0103-MIPS-ralink-fix-RT305x-clock-setup.patch} (56%) rename target/linux/ramips/patches-3.8/{0101-MIPS-ralink-add-missing-comment-in-irq-driver.patch => 0104-MIPS-ralink-add-missing-comment-in-irq-driver.patch} (66%) delete mode 100644 target/linux/ramips/patches-3.8/0105-MIPS-extend-RT3050-dtsi-file.patch rename target/linux/ramips/patches-3.8/{0102-MIPS-ralink-add-RT5350-sdram-register-defines.patch => 0105-MIPS-ralink-add-RT5350-sdram-register-defines.patch} (81%) delete mode 100644 target/linux/ramips/patches-3.8/0106-MIPS-add-RT5350-dtsi-file.patch rename target/linux/ramips/patches-3.8/{0133-MIPS-ralink-make-early_printk-work-on-RT2880.patch => 0106-MIPS-ralink-make-early_printk-work-on-RT2880.patch} (72%) create mode 100644 target/linux/ramips/patches-3.8/0107-MIPS-ralink-rename-gpio_pinmux-to-rt_gpio_pinmux.patch delete mode 100644 target/linux/ramips/patches-3.8/0108-MIPS-add-rt2880-dts-files.patch create mode 100644 target/linux/ramips/patches-3.8/0108-MIPS-ralink-make-the-RT305x-pinmuxing-structure-stat.patch create mode 100644 target/linux/ramips/patches-3.8/0109-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch delete mode 100644 target/linux/ramips/patches-3.8/0110-MIPS-add-rt3883-dts-files.patch create mode 100644 target/linux/ramips/patches-3.8/0110-MIPS-ralink-add-uart-mask-to-struct-ralink_pinmux.patch rename target/linux/ramips/patches-3.8/{0107-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch => 0111-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch} (92%) delete mode 100644 target/linux/ramips/patches-3.8/0112-MIPS-add-MT7620-dts-files.patch rename target/linux/ramips/patches-3.8/{0109-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch => 0112-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch} (91%) rename target/linux/ramips/patches-3.8/{0111-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch => 0113-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch} (78%) create mode 100644 target/linux/ramips/patches-3.8/0114-MIPS-ralink-add-cpu-feature-overrides.h.patch create mode 100644 target/linux/ramips/patches-3.8/0115-DT-add-vendor-prefixes-for-Ralink.patch create mode 100644 target/linux/ramips/patches-3.8/0116-DT-add-documentation-for-the-Ralink-MIPS-SoCs.patch create mode 100644 target/linux/ramips/patches-3.8/0117-DT-MIPS-ralink-clean-up-RT3050-dtsi-and-dts-file.patch create mode 100644 target/linux/ramips/patches-3.8/0118-DT-MIPS-ralink-add-RT2880-dts-files.patch create mode 100644 target/linux/ramips/patches-3.8/0119-DT-MIPS-ralink-add-RT3883-dts-files.patch delete mode 100644 target/linux/ramips/patches-3.8/0119-PCI-MIPS-adds-rt3883-pci-support.patch create mode 100644 target/linux/ramips/patches-3.8/0120-DT-MIPS-ralink-add-MT7620A-dts-files.patch create mode 100644 target/linux/ramips/patches-3.8/0121-MIPS-add-detect_memory_region.patch create mode 100644 target/linux/ramips/patches-3.8/0122-MIPS-ralink-add-memory-definition-to-struct-ralink_s.patch create mode 100644 target/linux/ramips/patches-3.8/0123-MIPS-ralink-add-memory-definition-for-RT305x.patch delete mode 100644 target/linux/ramips/patches-3.8/0123-MIPS-ralink-fix-uartmux-group-handling.patch create mode 100644 target/linux/ramips/patches-3.8/0124-MIPS-ralink-add-memory-definition-for-RT2880.patch delete mode 100644 target/linux/ramips/patches-3.8/0124-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch create mode 100644 target/linux/ramips/patches-3.8/0125-MIPS-ralink-add-memory-definition-for-RT3883.patch delete mode 100644 target/linux/ramips/patches-3.8/0125-MIPS-ralink-process-PCI-pinmux-group.patch delete mode 100644 target/linux/ramips/patches-3.8/0126-MIPS-ralink-add-PCI-pinmux-group-for-RT3883.patch create mode 100644 target/linux/ramips/patches-3.8/0126-MIPS-ralink-add-memory-definition-for-MT7620.patch delete mode 100644 target/linux/ramips/patches-3.8/0127-MIPS-ralink-add-GPIO-mode-to-RT3883-UART-pinmux-grou.patch create mode 100644 target/linux/ramips/patches-3.8/0127-MIPS-ralink-make-use-of-the-new-memory-detection-cod.patch delete mode 100644 target/linux/ramips/patches-3.8/0128-MIPS-ralink-add-cpu-feature-overrides.h-for-RT288x-S.patch rename target/linux/ramips/patches-3.8/{0104-MIPS-ralink-add-pinmux-driver.patch => 0128-MIPS-ralink-add-pinmux-driver.patch} (62%) delete mode 100644 target/linux/ramips/patches-3.8/0129-MIPS-ralink-add-cpu-feature-overrides.h-for-RT3x5x-R.patch rename target/linux/ramips/patches-3.8/{0113-MIPS-ralink-add-support-for-periodic-timer-irq.patch => 0129-MIPS-ralink-add-support-for-periodic-timer-irq.patch} (97%) rename target/linux/ramips/patches-3.8/{0114-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch => 0130-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch} (98%) delete mode 100644 target/linux/ramips/patches-3.8/0130-MIPS-ralink-add-cpu-feature-overrides.h-for-RT3662-3.patch rename target/linux/ramips/patches-3.8/{0115-SPI-ralink-add-Ralink-SoC-spi-driver.patch => 0131-SPI-ralink-add-Ralink-SoC-spi-driver.patch} (98%) delete mode 100644 target/linux/ramips/patches-3.8/0132-NET-ramips-fix-mdio-bus-support.patch rename target/linux/ramips/patches-3.8/{0116-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch => 0132-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch} (86%) rename target/linux/ramips/patches-3.8/{0117-serial-ralink-adds-mt7620-serial.patch => 0133-serial-ralink-adds-mt7620-serial.patch} (86%) rename target/linux/ramips/patches-3.8/{0118-PCI-MIPS-adds-rt2880-pci-support.patch => 0134-PCI-MIPS-adds-rt2880-pci-support.patch} (98%) rename target/linux/ramips/patches-3.8/{0131-MIPS-pci-rt3883-rewrite.patch => 0135-PCI-MIPS-adds-rt3883-pci-support.patch} (52%) rename target/linux/ramips/patches-3.8/{0120-NET-MIPS-add-ralink-SoC-ethernet-driver.patch => 0136-NET-MIPS-add-ralink-SoC-ethernet-driver.patch} (97%) rename target/linux/ramips/patches-3.8/{0121-watchdog-adds-ralink-wdt.patch => 0137-watchdog-adds-ralink-wdt.patch} (98%) delete mode 100644 target/linux/ramips/patches-3.8/0200-MIPS-read-the-mips_machine-name-from-OF-and-output-i.patch delete mode 100644 target/linux/ramips/patches-3.8/0207-owrt-MIPS-ralink-add-support-for-runtime-memory-dete.patch delete mode 100644 target/linux/ramips/patches-3.8/0212-MIPS-ralink-add-GPIO-mode-to-RT305x-UART-pinmux-grou.patch diff --git a/target/linux/ramips/patches-3.8/0100-MIPS-move-mips_-set-get-_machine_name-to-a-more-gene.patch b/target/linux/ramips/patches-3.8/0100-MIPS-move-mips_-set-get-_machine_name-to-a-more-gene.patch new file mode 100644 index 0000000000..d5fe653c38 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0100-MIPS-move-mips_-set-get-_machine_name-to-a-more-gene.patch @@ -0,0 +1,154 @@ +From dd4bb7e821d112bff981016fd4e7c014ca9425f9 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 11 Apr 2013 05:34:59 +0000 +Subject: [PATCH 100/137] MIPS: move mips_{set,get}_machine_name() to a more + generic place + +Previously this functionality was only available to users of the mips_machine +api. Moving the code to prom.c allows us to also add a OF wrapper. + +Signed-off-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/5164/ +--- + arch/mips/include/asm/mips_machine.h | 4 ---- + arch/mips/include/asm/prom.h | 3 +++ + arch/mips/kernel/mips_machine.c | 21 --------------------- + arch/mips/kernel/proc.c | 2 +- + arch/mips/kernel/prom.c | 31 +++++++++++++++++++++++++++++++ + 5 files changed, 35 insertions(+), 26 deletions(-) + +--- a/arch/mips/include/asm/mips_machine.h ++++ b/arch/mips/include/asm/mips_machine.h +@@ -42,13 +42,9 @@ extern long __mips_machines_end; + #ifdef CONFIG_MIPS_MACHINE + int mips_machtype_setup(char *id) __init; + void mips_machine_setup(void) __init; +-void mips_set_machine_name(const char *name) __init; +-char *mips_get_machine_name(void); + #else + static inline int mips_machtype_setup(char *id) { return 1; } + static inline void mips_machine_setup(void) { } +-static inline void mips_set_machine_name(const char *name) { } +-static inline char *mips_get_machine_name(void) { return NULL; } + #endif /* CONFIG_MIPS_MACHINE */ + + #endif /* __ASM_MIPS_MACHINE_H */ +--- a/arch/mips/include/asm/prom.h ++++ b/arch/mips/include/asm/prom.h +@@ -48,4 +48,7 @@ extern void __dt_setup_arch(struct boot_ + static inline void device_tree_init(void) { } + #endif /* CONFIG_OF */ + ++extern char *mips_get_machine_name(void); ++extern void mips_set_machine_name(const char *name); ++ + #endif /* __ASM_PROM_H */ +--- a/arch/mips/kernel/mips_machine.c ++++ b/arch/mips/kernel/mips_machine.c +@@ -13,7 +13,6 @@ + #include + + static struct mips_machine *mips_machine __initdata; +-static char *mips_machine_name = "Unknown"; + + #define for_each_machine(mach) \ + for ((mach) = (struct mips_machine *)&__mips_machines_start; \ +@@ -21,25 +20,6 @@ static char *mips_machine_name = "Unknow + (unsigned long)(mach) < (unsigned long)&__mips_machines_end; \ + (mach)++) + +-__init void mips_set_machine_name(const char *name) +-{ +- char *p; +- +- if (name == NULL) +- return; +- +- p = kstrdup(name, GFP_KERNEL); +- if (!p) +- pr_err("MIPS: no memory for machine_name\n"); +- +- mips_machine_name = p; +-} +- +-char *mips_get_machine_name(void) +-{ +- return mips_machine_name; +-} +- + __init int mips_machtype_setup(char *id) + { + struct mips_machine *mach; +@@ -79,7 +59,6 @@ __init void mips_machine_setup(void) + return; + + mips_set_machine_name(mips_machine->mach_name); +- pr_info("MIPS: machine is %s\n", mips_machine_name); + + if (mips_machine->mach_setup) + mips_machine->mach_setup(); +--- a/arch/mips/kernel/proc.c ++++ b/arch/mips/kernel/proc.c +@@ -12,7 +12,7 @@ + #include + #include + #include +-#include ++#include + + unsigned int vced_count, vcei_count; + +--- a/arch/mips/kernel/prom.c ++++ b/arch/mips/kernel/prom.c +@@ -23,6 +23,22 @@ + #include + #include + ++static char mips_machine_name[64] = "Unknown"; ++ ++__init void mips_set_machine_name(const char *name) ++{ ++ if (name == NULL) ++ return; ++ ++ strncpy(mips_machine_name, name, sizeof(mips_machine_name)); ++ pr_info("MIPS: machine is %s\n", mips_get_machine_name()); ++} ++ ++char *mips_get_machine_name(void) ++{ ++ return mips_machine_name; ++} ++ + int __init early_init_dt_scan_memory_arch(unsigned long node, + const char *uname, int depth, + void *data) +@@ -50,6 +66,18 @@ void __init early_init_dt_setup_initrd_a + } + #endif + ++int __init early_init_dt_scan_model(unsigned long node, const char *uname, ++ int depth, void *data) ++{ ++ if (!depth) { ++ char *model = of_get_flat_dt_prop(node, "model", NULL); ++ ++ if (model) ++ mips_set_machine_name(model); ++ } ++ return 0; ++} ++ + void __init early_init_devtree(void *params) + { + /* Setup flat device-tree pointer */ +@@ -65,6 +93,9 @@ void __init early_init_devtree(void *par + /* Scan memory nodes */ + of_scan_flat_dt(early_init_dt_scan_root, NULL); + of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL); ++ ++ /* try to load the mips machine name */ ++ of_scan_flat_dt(early_init_dt_scan_model, NULL); + } + + void __init __dt_setup_arch(struct boot_param_header *bph) diff --git a/target/linux/ramips/patches-3.8/0122-MIPS-ralink-handle-PCI-interrupts-as-well.patch b/target/linux/ramips/patches-3.8/0101-MIPS-ralink-add-PCI-IRQ-handling.patch similarity index 68% rename from target/linux/ramips/patches-3.8/0122-MIPS-ralink-handle-PCI-interrupts-as-well.patch rename to target/linux/ramips/patches-3.8/0101-MIPS-ralink-add-PCI-IRQ-handling.patch index b898a0a53f..bdb5cfc574 100644 --- a/target/linux/ramips/patches-3.8/0122-MIPS-ralink-handle-PCI-interrupts-as-well.patch +++ b/target/linux/ramips/patches-3.8/0101-MIPS-ralink-add-PCI-IRQ-handling.patch @@ -1,9 +1,14 @@ -From e0fbc01d33265d32fe7f5f34269cb88be2a13c24 Mon Sep 17 00:00:00 2001 +From 16d9eaf22f30ed0b0deddfe8e11426889ccdb556 Mon Sep 17 00:00:00 2001 From: Gabor Juhos -Date: Sun, 31 Mar 2013 10:17:26 +0200 -Subject: [PATCH] MIPS: ralink: handle PCI interrupts as well +Date: Wed, 10 Apr 2013 09:07:27 +0200 +Subject: [PATCH 101/137] MIPS: ralink: add PCI IRQ handling +The Ralink IRQ code was not handling the PCI IRQ yet. Add this functionaility +to make PCI work on rt3883. + +Signed-off-by: John Crispin Signed-off-by: Gabor Juhos +Patchwork: http://patchwork.linux-mips.org/patch/5165/ --- arch/mips/ralink/irq.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/linux/ramips/patches-3.8/0103-MIPS-ralink-add-RT3352-usb-register-defines.patch b/target/linux/ramips/patches-3.8/0102-MIPS-ralink-add-RT3352-register-defines.patch similarity index 59% rename from target/linux/ramips/patches-3.8/0103-MIPS-ralink-add-RT3352-usb-register-defines.patch rename to target/linux/ramips/patches-3.8/0102-MIPS-ralink-add-RT3352-register-defines.patch index d99781bf7d..2d296db665 100644 --- a/target/linux/ramips/patches-3.8/0103-MIPS-ralink-add-RT3352-usb-register-defines.patch +++ b/target/linux/ramips/patches-3.8/0102-MIPS-ralink-add-RT3352-register-defines.patch @@ -1,34 +1,35 @@ -From 5157985fbc0f071276b0c3381ac8ed191878358a Mon Sep 17 00:00:00 2001 +From e6bcdad6f0811daedc2a448f5d7fb98c116a5241 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 21 Mar 2013 19:01:49 +0100 -Subject: [PATCH 103/121] MIPS: ralink: add RT3352 usb register defines +Subject: [PATCH 102/137] MIPS: ralink: add RT3352 register defines -Add a few missing defines that are needed to make USB work on the RT3352 -and RT5350. +Add a few missing defines that are needed to make USB and clock detection work +on the RT3352. Signed-off-by: John Crispin +Acked-by: Gabor Juhos +Patchwork: http://patchwork.linux-mips.org/patch/5166/ --- - arch/mips/include/asm/mach-ralink/rt305x.h | 11 +++++++++++ - 1 file changed, 11 insertions(+) + arch/mips/include/asm/mach-ralink/rt305x.h | 13 +++++++++++++ + 1 file changed, 13 insertions(+) --- a/arch/mips/include/asm/mach-ralink/rt305x.h +++ b/arch/mips/include/asm/mach-ralink/rt305x.h -@@ -144,4 +144,18 @@ static inline int soc_is_rt5350(void) +@@ -136,4 +136,17 @@ static inline int soc_is_rt5350(void) #define RT305X_GPIO_MODE_SDRAM BIT(8) #define RT305X_GPIO_MODE_RGMII BIT(9) ++#define RT3352_SYSC_REG_SYSCFG0 0x010 +#define RT3352_SYSC_REG_SYSCFG1 0x014 +#define RT3352_SYSC_REG_CLKCFG1 0x030 +#define RT3352_SYSC_REG_RSTCTRL 0x034 +#define RT3352_SYSC_REG_USB_PS 0x05c + ++#define RT3352_CLKCFG0_XTAL_SEL BIT(20) +#define RT3352_CLKCFG1_UPHY0_CLK_EN BIT(18) +#define RT3352_CLKCFG1_UPHY1_CLK_EN BIT(20) +#define RT3352_RSTCTRL_UHST BIT(22) +#define RT3352_RSTCTRL_UDEV BIT(25) +#define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10) + -+#define RT3352_SYSC_REG_SYSCFG0 0x010 -+#define RT3352_CLKCFG0_XTAL_SEL BIT(20) -+ #endif diff --git a/target/linux/ramips/patches-3.8/0100-MIPS-ralink-fix-RT305x-clock-setup.patch b/target/linux/ramips/patches-3.8/0103-MIPS-ralink-fix-RT305x-clock-setup.patch similarity index 56% rename from target/linux/ramips/patches-3.8/0100-MIPS-ralink-fix-RT305x-clock-setup.patch rename to target/linux/ramips/patches-3.8/0103-MIPS-ralink-fix-RT305x-clock-setup.patch index 55b7532310..7d682e75bd 100644 --- a/target/linux/ramips/patches-3.8/0100-MIPS-ralink-fix-RT305x-clock-setup.patch +++ b/target/linux/ramips/patches-3.8/0103-MIPS-ralink-fix-RT305x-clock-setup.patch @@ -1,33 +1,37 @@ -From eb8d7fbba907df0a51e504930c00b2c9ec837b54 Mon Sep 17 00:00:00 2001 +From 845f786c561c0991d9b4088a2d77b8fd4831d487 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 22 Mar 2013 19:25:59 +0100 -Subject: [PATCH 100/121] MIPS: ralink: fix RT305x clock setup +Subject: [PATCH 103/137] MIPS: ralink: fix RT305x clock setup -Add a few missing clocks and remove the unused sys clock. +Add a few missing clocks. Signed-off-by: John Crispin +Acked-by: Gabor Juhos +Patchwork: http://patchwork.linux-mips.org/patch/5167/ --- - arch/mips/ralink/rt305x.c | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) + arch/mips/ralink/rt305x.c | 12 ++++++++++++ + 1 file changed, 12 insertions(+) --- a/arch/mips/ralink/rt305x.c +++ b/arch/mips/ralink/rt305x.c -@@ -125,6 +125,7 @@ void __init ralink_clk_init(void) +@@ -124,6 +124,8 @@ struct ralink_pinmux gpio_pinmux = { + void __init ralink_clk_init(void) { unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate; ++ unsigned long wmac_rate = 40000000; ++ u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); -+ int wmac_20mhz = 0; if (soc_is_rt305x() || soc_is_rt3350()) { - t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) & -@@ -176,11 +177,24 @@ void __init ralink_clk_init(void) +@@ -176,11 +178,21 @@ void __init ralink_clk_init(void) BUG(); } + if (soc_is_rt3352() || soc_is_rt5350()) { + u32 val = rt_sysc_r32(RT3352_SYSC_REG_SYSCFG0); -+ if ((val & RT3352_CLKCFG0_XTAL_SEL) == 0) -+ wmac_20mhz = 1; ++ ++ if (!(val & RT3352_CLKCFG0_XTAL_SEL)) ++ wmac_rate = 20000000; + } + ralink_clk_add("cpu", cpu_rate); @@ -37,11 +41,7 @@ Signed-off-by: John Crispin ralink_clk_add("10000500.uart", uart_rate); ralink_clk_add("10000c00.uartlite", uart_rate); + ralink_clk_add("10100000.ethernet", sys_rate); -+ -+ if (wmac_20mhz) -+ ralink_clk_add("10180000.wmac", 20000000); -+ else -+ ralink_clk_add("10180000.wmac", 40000000); ++ ralink_clk_add("10180000.wmac", wmac_rate); } void __init ralink_of_remap(void) diff --git a/target/linux/ramips/patches-3.8/0101-MIPS-ralink-add-missing-comment-in-irq-driver.patch b/target/linux/ramips/patches-3.8/0104-MIPS-ralink-add-missing-comment-in-irq-driver.patch similarity index 66% rename from target/linux/ramips/patches-3.8/0101-MIPS-ralink-add-missing-comment-in-irq-driver.patch rename to target/linux/ramips/patches-3.8/0104-MIPS-ralink-add-missing-comment-in-irq-driver.patch index 81ae16e90b..3218384973 100644 --- a/target/linux/ramips/patches-3.8/0101-MIPS-ralink-add-missing-comment-in-irq-driver.patch +++ b/target/linux/ramips/patches-3.8/0104-MIPS-ralink-add-missing-comment-in-irq-driver.patch @@ -1,18 +1,20 @@ -From 68dba842ed23c9688340444b44951c448f4ff9ba Mon Sep 17 00:00:00 2001 +From 2747613b1bba0d4497ed2c4a77e2011d02029153 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Sat, 16 Mar 2013 16:28:54 +0100 -Subject: [PATCH 101/121] MIPS: ralink: add missing comment in irq driver +Subject: [PATCH 104/137] MIPS: ralink: add missing comment in irq driver Trivial patch that adds a comment that makes the code more readable. Signed-off-by: John Crispin +Acked-by: Gabor Juhos +Patchwork: http://patchwork.linux-mips.org/patch/5168/ --- arch/mips/ralink/irq.c | 1 + 1 file changed, 1 insertion(+) --- a/arch/mips/ralink/irq.c +++ b/arch/mips/ralink/irq.c -@@ -162,6 +162,7 @@ static int __init intc_of_init(struct de +@@ -166,6 +166,7 @@ static int __init intc_of_init(struct de irq_set_chained_handler(irq, ralink_intc_irq_handler); irq_set_handler_data(irq, domain); diff --git a/target/linux/ramips/patches-3.8/0105-MIPS-extend-RT3050-dtsi-file.patch b/target/linux/ramips/patches-3.8/0105-MIPS-extend-RT3050-dtsi-file.patch deleted file mode 100644 index 01aa70ba50..0000000000 --- a/target/linux/ramips/patches-3.8/0105-MIPS-extend-RT3050-dtsi-file.patch +++ /dev/null @@ -1,159 +0,0 @@ -From 45e797ec7555c50775d9ac7fc7a17a544344aa3f Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 21 Mar 2013 17:47:07 +0100 -Subject: [PATCH 105/121] MIPS: extend RT3050 dtsi file - -Add some additional properties to the dtsi file for ethernet and wifi. - -Signed-off-by: John Crispin ---- - arch/mips/ralink/dts/rt3050.dtsi | 96 ++++++++++++++++++++++++++++++++------ - 1 file changed, 81 insertions(+), 15 deletions(-) - ---- a/arch/mips/ralink/dts/rt3050.dtsi -+++ b/arch/mips/ralink/dts/rt3050.dtsi -@@ -1,7 +1,7 @@ - / { - #address-cells = <1>; - #size-cells = <1>; -- compatible = "ralink,rt3050-soc", "ralink,rt3052-soc"; -+ compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc"; - - cpus { - cpu@0 { -@@ -23,7 +23,7 @@ - palmbus@10000000 { - compatible = "palmbus"; - reg = <0x10000000 0x200000>; -- ranges = <0x0 0x10000000 0x1FFFFF>; -+ ranges = <0x0 0x10000000 0x1FFFFF>; - - #address-cells = <1>; - #size-cells = <1>; -@@ -34,8 +34,18 @@ - }; - - timer@100 { -+ compatible = "ralink,rt3052-timer", "ralink,rt2880-timer"; -+ reg = <0x100 0x20>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <1>; -+ -+ status = "disabled"; -+ }; -+ -+ watchdog@120 { - compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt"; -- reg = <0x100 0x100>; -+ reg = <0x120 0x10>; - }; - - intc: intc@200 { -@@ -61,10 +71,12 @@ - gpio-controller; - #gpio-cells = <2>; - -- ralink,ngpio = <24>; -- ralink,regs = [ 00 04 08 0c -- 20 24 28 2c -- 30 34 ]; -+ ralink,num-gpios = <24>; -+ ralink,register-map = [ 00 04 08 0c -+ 20 24 28 2c -+ 30 34 ]; -+ -+ status = "disabled"; - }; - - gpio1: gpio@638 { -@@ -74,10 +86,12 @@ - gpio-controller; - #gpio-cells = <2>; - -- ralink,ngpio = <16>; -- ralink,regs = [ 00 04 08 0c -- 10 14 18 1c -- 20 24 ]; -+ ralink,num-gpios = <16>; -+ ralink,register-map = [ 00 04 08 0c -+ 10 14 18 1c -+ 20 24 ]; -+ -+ status = "disabled"; - }; - - gpio2: gpio@660 { -@@ -87,10 +101,21 @@ - gpio-controller; - #gpio-cells = <2>; - -- ralink,ngpio = <12>; -- ralink,regs = [ 00 04 08 0c -- 10 14 18 1c -- 20 24 ]; -+ ralink,num-gpios = <12>; -+ ralink,register-map = [ 00 04 08 0c -+ 10 14 18 1c -+ 20 24 ]; -+ -+ status = "disabled"; -+ }; -+ -+ spi@b00 { -+ compatible = "ralink,rt3050-spi", "ralink,rt2880-spi"; -+ reg = <0xb00 0x100>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "disabled"; - }; - - uartlite@c00 { -@@ -102,5 +127,46 @@ - - reg-shift = <2>; - }; -+ -+ }; -+ -+ ethernet@10100000 { -+ compatible = "ralink,rt3050-eth"; -+ reg = <0x10100000 10000>; -+ -+ interrupt-parent = <&cpuintc>; -+ interrupts = <5>; -+ -+ status = "disabled"; -+ }; -+ -+ esw@10110000 { -+ compatible = "ralink,rt3050-esw"; -+ reg = <0x10110000 8000>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <17>; -+ -+ status = "disabled"; -+ }; -+ -+ wmac@10180000 { -+ compatible = "ralink,rt3050-wmac", "ralink,rt2880-wmac"; -+ reg = <0x10180000 40000>; -+ -+ interrupt-parent = <&cpuintc>; -+ interrupts = <6>; -+ -+ status = "disabled"; -+ }; -+ -+ otg@101c0000 { -+ compatible = "ralink,rt3050-otg"; -+ reg = <0x101c0000 40000>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <18>; -+ -+ status = "disabled"; - }; - }; diff --git a/target/linux/ramips/patches-3.8/0102-MIPS-ralink-add-RT5350-sdram-register-defines.patch b/target/linux/ramips/patches-3.8/0105-MIPS-ralink-add-RT5350-sdram-register-defines.patch similarity index 81% rename from target/linux/ramips/patches-3.8/0102-MIPS-ralink-add-RT5350-sdram-register-defines.patch rename to target/linux/ramips/patches-3.8/0105-MIPS-ralink-add-RT5350-sdram-register-defines.patch index c4bf63aae2..ccabcbd64b 100644 --- a/target/linux/ramips/patches-3.8/0102-MIPS-ralink-add-RT5350-sdram-register-defines.patch +++ b/target/linux/ramips/patches-3.8/0105-MIPS-ralink-add-RT5350-sdram-register-defines.patch @@ -1,12 +1,14 @@ -From ac2614707be7ddceb0f0b623d55d200f28695d5f Mon Sep 17 00:00:00 2001 +From 31f4b3ca1c9bb4bcbbebbe5db5a33ac82f130d9c Mon Sep 17 00:00:00 2001 From: John Crispin Date: Mon, 25 Mar 2013 11:19:58 +0100 -Subject: [PATCH 102/121] MIPS: ralink: add RT5350 sdram register defines +Subject: [PATCH 105/137] MIPS: ralink: add RT5350 sdram register defines Add a few missing defines that are needed to make memory detection work on the RT5350. Signed-off-by: John Crispin +Acked-by: Gabor Juhos +Patchwork: http://patchwork.linux-mips.org/patch/5169/ --- arch/mips/include/asm/mach-ralink/rt305x.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/target/linux/ramips/patches-3.8/0106-MIPS-add-RT5350-dtsi-file.patch b/target/linux/ramips/patches-3.8/0106-MIPS-add-RT5350-dtsi-file.patch deleted file mode 100644 index ee3c851a42..0000000000 --- a/target/linux/ramips/patches-3.8/0106-MIPS-add-RT5350-dtsi-file.patch +++ /dev/null @@ -1,198 +0,0 @@ -From 1238d973f3828a65ccf9aead437b4e04925b100e Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 21 Mar 2013 17:47:24 +0100 -Subject: [PATCH 106/121] MIPS: add RT5350 dtsi file - -Add a dtsi file for RT5350 Soc. This SoC is almost the same as RT3050 but has -OHCI/EHCI in favour of the Synopsis DWC2 core. - -Signed-off-by: John Crispin ---- - arch/mips/ralink/dts/rt5350.dtsi | 181 ++++++++++++++++++++++++++++++++++++++ - 1 file changed, 181 insertions(+) - create mode 100644 arch/mips/ralink/dts/rt5350.dtsi - ---- /dev/null -+++ b/arch/mips/ralink/dts/rt5350.dtsi -@@ -0,0 +1,181 @@ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "ralink,rt5350-soc"; -+ -+ cpus { -+ cpu@0 { -+ compatible = "mips,mips24KEc"; -+ }; -+ }; -+ -+ chosen { -+ bootargs = "console=ttyS0,57600 init=/init"; -+ }; -+ -+ cpuintc: cpuintc@0 { -+ #address-cells = <0>; -+ #interrupt-cells = <1>; -+ interrupt-controller; -+ compatible = "mti,cpu-interrupt-controller"; -+ }; -+ -+ palmbus@10000000 { -+ compatible = "palmbus"; -+ reg = <0x10000000 0x200000>; -+ ranges = <0x0 0x10000000 0x1FFFFF>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ sysc@0 { -+ compatible = "ralink,rt5350-sysc", "ralink,rt3050-sysc"; -+ reg = <0x0 0x100>; -+ }; -+ -+ timer@100 { -+ compatible = "ralink,rt5350-timer", "ralink,rt2880-timer"; -+ reg = <0x100 0x20>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <1>; -+ -+ status = "disabled"; -+ }; -+ -+ watchdog@120 { -+ compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt"; -+ reg = <0x120 0x10>; -+ }; -+ -+ intc: intc@200 { -+ compatible = "ralink,rt5350-intc", "ralink,rt2880-intc"; -+ reg = <0x200 0x100>; -+ -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ -+ interrupt-parent = <&cpuintc>; -+ interrupts = <2>; -+ }; -+ -+ memc@300 { -+ compatible = "ralink,rt5350-memc", "ralink,rt3050-memc"; -+ reg = <0x300 0x100>; -+ }; -+ -+ gpio0: gpio@600 { -+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; -+ reg = <0x600 0x34>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ ralink,num-gpios = <24>; -+ ralink,register-map = [ 00 04 08 0c -+ 20 24 28 2c -+ 30 34 ]; -+ -+ status = "disabled"; -+ }; -+ -+ gpio1: gpio@638 { -+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; -+ reg = <0x638 0x24>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ ralink,num-gpios = <16>; -+ ralink,register-map = [ 00 04 08 0c -+ 10 14 18 1c -+ 20 24 ]; -+ -+ status = "disabled"; -+ }; -+ -+ gpio2: gpio@660 { -+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; -+ reg = <0x660 0x24>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ ralink,num-gpios = <12>; -+ ralink,register-map = [ 00 04 08 0c -+ 10 14 18 1c -+ 20 24 ]; -+ -+ status = "disabled"; -+ }; -+ -+ spi@b00 { -+ compatible = "ralink,rt5350-spi", "ralink,rt2880-spi"; -+ reg = <0xb00 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ status = "disabled"; -+ }; -+ -+ uartlite@c00 { -+ compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a"; -+ reg = <0xc00 0x100>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <12>; -+ -+ reg-shift = <2>; -+ }; -+ }; -+ -+ ethernet@10100000 { -+ compatible = "ralink,rt5350-eth", "ralink,rt3050-eth"; -+ reg = <0x10100000 10000>; -+ -+ interrupt-parent = <&cpuintc>; -+ interrupts = <5>; -+ -+ status = "disabled"; -+ }; -+ -+ esw@10110000 { -+ compatible = "ralink,rt5350-esw", "ralink,rt3050-esw"; -+ reg = <0x10110000 8000>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <17>; -+ -+ status = "disabled"; -+ }; -+ -+ wmac@10180000 { -+ compatible = "ralink,rt5350-wmac", "ralink,rt2880-wmac"; -+ reg = <0x10180000 40000>; -+ -+ interrupt-parent = <&cpuintc>; -+ interrupts = <6>; -+ -+ status = "disabled"; -+ }; -+ -+ ehci@101c0000 { -+ compatible = "ralink,rt5350-ehci", "ehci-platform"; -+ reg = <0x101c0000 0x1000>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <18>; -+ -+ status = "disabled"; -+ }; -+ -+ ohci@101c1000 { -+ compatible = "ralink,rt5350-ohci", "ohci-platform"; -+ reg = <0x101c1000 0x1000>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <18>; -+ -+ status = "disabled"; -+ }; -+}; diff --git a/target/linux/ramips/patches-3.8/0133-MIPS-ralink-make-early_printk-work-on-RT2880.patch b/target/linux/ramips/patches-3.8/0106-MIPS-ralink-make-early_printk-work-on-RT2880.patch similarity index 72% rename from target/linux/ramips/patches-3.8/0133-MIPS-ralink-make-early_printk-work-on-RT2880.patch rename to target/linux/ramips/patches-3.8/0106-MIPS-ralink-make-early_printk-work-on-RT2880.patch index 71dad9e0c6..4636862fe5 100644 --- a/target/linux/ramips/patches-3.8/0133-MIPS-ralink-make-early_printk-work-on-RT2880.patch +++ b/target/linux/ramips/patches-3.8/0106-MIPS-ralink-make-early_printk-work-on-RT2880.patch @@ -1,11 +1,13 @@ -From 3f32be8f012fb5476ea916e583e584cccc632a84 Mon Sep 17 00:00:00 2001 +From d83e83a544258b68b4411232a31ccce134244a19 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Tue, 9 Apr 2013 18:31:15 +0200 -Subject: [PATCH V2 08/16] MIPS: ralink: make early_printk work on RT2880 +Subject: [PATCH 106/137] MIPS: ralink: make early_printk work on RT2880 RT2880 has a different location for the early serial port. Signed-off-by: John Crispin +Acked-by: Gabor Juhos +Patchwork: http://patchwork.linux-mips.org/patch/5170/ --- arch/mips/ralink/early_printk.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/target/linux/ramips/patches-3.8/0107-MIPS-ralink-rename-gpio_pinmux-to-rt_gpio_pinmux.patch b/target/linux/ramips/patches-3.8/0107-MIPS-ralink-rename-gpio_pinmux-to-rt_gpio_pinmux.patch new file mode 100644 index 0000000000..d10b159ac8 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0107-MIPS-ralink-rename-gpio_pinmux-to-rt_gpio_pinmux.patch @@ -0,0 +1,36 @@ +From b4c597bd073d5e4c9cee800ac5a25fb9ff1c0ef7 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Fri, 12 Apr 2013 22:12:09 +0200 +Subject: [PATCH 107/137] MIPS: ralink: rename gpio_pinmux to rt_gpio_pinmux + +Add proper namespacing to the variable. + +Signed-off-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/5171/ +--- + arch/mips/ralink/common.h | 2 +- + arch/mips/ralink/rt305x.c | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/mips/ralink/common.h ++++ b/arch/mips/ralink/common.h +@@ -24,7 +24,7 @@ struct ralink_pinmux { + int uart_shift; + void (*wdt_reset)(void); + }; +-extern struct ralink_pinmux gpio_pinmux; ++extern struct ralink_pinmux rt_gpio_pinmux; + + struct ralink_soc_info { + unsigned char sys_type[RAMIPS_SYS_TYPE_LEN]; +--- a/arch/mips/ralink/rt305x.c ++++ b/arch/mips/ralink/rt305x.c +@@ -114,7 +114,7 @@ void rt305x_wdt_reset(void) + rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG); + } + +-struct ralink_pinmux gpio_pinmux = { ++struct ralink_pinmux rt_gpio_pinmux = { + .mode = mode_mux, + .uart = uart_mux, + .uart_shift = RT305X_GPIO_MODE_UART0_SHIFT, diff --git a/target/linux/ramips/patches-3.8/0108-MIPS-add-rt2880-dts-files.patch b/target/linux/ramips/patches-3.8/0108-MIPS-add-rt2880-dts-files.patch deleted file mode 100644 index f0a39ced0d..0000000000 --- a/target/linux/ramips/patches-3.8/0108-MIPS-add-rt2880-dts-files.patch +++ /dev/null @@ -1,210 +0,0 @@ -From b72ae753b73cbc4b488dcdbf997faec199c8bb3f Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 21 Mar 2013 18:29:02 +0100 -Subject: [PATCH 108/121] MIPS: add rt2880 dts files - -Add a dtsi file for RT2880 SoC and a sample dts file. This SoC is first one that -was released in this SoC family. - -Signed-off-by: John Crispin ---- - arch/mips/ralink/Kconfig | 4 ++ - arch/mips/ralink/dts/Makefile | 1 + - arch/mips/ralink/dts/rt2880.dtsi | 116 ++++++++++++++++++++++++++++++++++ - arch/mips/ralink/dts/rt2880_eval.dts | 52 +++++++++++++++ - 4 files changed, 173 insertions(+) - create mode 100644 arch/mips/ralink/dts/rt2880.dtsi - create mode 100644 arch/mips/ralink/dts/rt2880_eval.dts - ---- a/arch/mips/ralink/Kconfig -+++ b/arch/mips/ralink/Kconfig -@@ -26,6 +26,10 @@ choice - config DTB_RT_NONE - bool "None" - -+ config DTB_RT2880_EVAL -+ bool "RT2880 eval kit" -+ depends on SOC_RT288X -+ - config DTB_RT305X_EVAL - bool "RT305x eval kit" - depends on SOC_RT305X ---- a/arch/mips/ralink/dts/Makefile -+++ b/arch/mips/ralink/dts/Makefile -@@ -1 +1,2 @@ -+obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o - obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o ---- /dev/null -+++ b/arch/mips/ralink/dts/rt2880.dtsi -@@ -0,0 +1,116 @@ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "ralink,rt2880-soc"; -+ -+ cpus { -+ cpu@0 { -+ compatible = "mips,mips24KEc"; -+ }; -+ }; -+ -+ chosen { -+ bootargs = "console=ttyS0,57600 init=/init"; -+ }; -+ -+ cpuintc: cpuintc@0 { -+ #address-cells = <0>; -+ #interrupt-cells = <1>; -+ interrupt-controller; -+ compatible = "mti,cpu-interrupt-controller"; -+ }; -+ -+ palmbus@10000000 { -+ compatible = "palmbus"; -+ reg = <0x10000000 0x200000>; -+ ranges = <0x0 0x10000000 0x1FFFFF>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ sysc@300000 { -+ compatible = "ralink,rt2880-sysc"; -+ reg = <0x300000 0x100>; -+ }; -+ -+ timer@300100 { -+ compatible = "ralink,rt2880-timer"; -+ reg = <0x300100 0x20>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <1>; -+ -+ status = "disabled"; -+ }; -+ -+ watchdog@300120 { -+ compatible = "ralink,rt2880-wdt"; -+ reg = <0x300120 0x10>; -+ }; -+ -+ intc: intc@300200 { -+ compatible = "ralink,rt2880-intc"; -+ reg = <0x300200 0x100>; -+ -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ -+ interrupt-parent = <&cpuintc>; -+ interrupts = <2>; -+ }; -+ -+ memc@300300 { -+ compatible = "ralink,rt2880-memc"; -+ reg = <0x300300 0x100>; -+ }; -+ -+ gpio0: gpio@300600 { -+ compatible = "ralink,rt2880-gpio"; -+ reg = <0x300600 0x34>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ ralink,num-gpios = <24>; -+ ralink,register-map = [ 00 04 08 0c -+ 20 24 28 2c -+ 30 34 ]; -+ }; -+ -+ gpio1: gpio@300638 { -+ compatible = "ralink,rt2880-gpio"; -+ reg = <0x300638 0x24>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ ralink,num-gpios = <16>; -+ ralink,register-map = [ 00 04 08 0c -+ 10 14 18 1c -+ 20 24 ]; -+ }; -+ -+ gpio2: gpio@300660 { -+ compatible = "ralink,rt2880-gpio"; -+ reg = <0x300660 0x24>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ ralink,num-gpios = <32>; -+ ralink,register-map = [ 00 04 08 0c -+ 10 14 18 1c -+ 20 24 ]; -+ }; -+ -+ uartlite@300c00 { -+ compatible = "ralink,rt2880-uart", "ns16550a"; -+ reg = <0x300c00 0x100>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <12>; -+ -+ reg-shift = <2>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/mips/ralink/dts/rt2880_eval.dts -@@ -0,0 +1,52 @@ -+/dts-v1/; -+ -+/include/ "rt2880.dtsi" -+ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc"; -+ model = "Ralink RT2880 evaluation board"; -+ -+ memory@8000000 { -+ reg = <0x0 0x2000000>; -+ }; -+ -+ palmbus@10000000 { -+ sysc@300000 { -+ ralink,pinmux = "uartlite", "spi"; -+ ralink,uartmux = "gpio"; -+ ralink,wdtmux = <0>; -+ }; -+ }; -+ -+ cfi@1f000000 { -+ compatible = "cfi-flash"; -+ reg = <0x1f000000 0x800000>; -+ -+ bank-width = <2>; -+ device-width = <2>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "uboot"; -+ reg = <0x0 0x30000>; -+ read-only; -+ }; -+ partition@30000 { -+ label = "uboot-env"; -+ reg = <0x30000 0x10000>; -+ read-only; -+ }; -+ partition@40000 { -+ label = "calibration"; -+ reg = <0x40000 0x10000>; -+ read-only; -+ }; -+ partition@50000 { -+ label = "linux"; -+ reg = <0x50000 0x7b0000>; -+ }; -+ }; -+}; diff --git a/target/linux/ramips/patches-3.8/0108-MIPS-ralink-make-the-RT305x-pinmuxing-structure-stat.patch b/target/linux/ramips/patches-3.8/0108-MIPS-ralink-make-the-RT305x-pinmuxing-structure-stat.patch new file mode 100644 index 0000000000..f09d57f818 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0108-MIPS-ralink-make-the-RT305x-pinmuxing-structure-stat.patch @@ -0,0 +1,44 @@ +From 96eba63bf18cd3d96ded62fb809c8cf7e0f2e2c1 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Fri, 12 Apr 2013 22:16:12 +0200 +Subject: [PATCH 108/137] MIPS: ralink: make the RT305x pinmuxing structure + static + +These structures are exported via struct ralink_pinmux rt_gpio_pinmux and can +hence be static. + +Signed-off-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/5172/ +--- + arch/mips/ralink/rt305x.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/mips/ralink/rt305x.c ++++ b/arch/mips/ralink/rt305x.c +@@ -22,7 +22,7 @@ + + enum rt305x_soc_type rt305x_soc; + +-struct ralink_pinmux_grp mode_mux[] = { ++static struct ralink_pinmux_grp mode_mux[] = { + { + .name = "i2c", + .mask = RT305X_GPIO_MODE_I2C, +@@ -61,7 +61,7 @@ struct ralink_pinmux_grp mode_mux[] = { + }, {0} + }; + +-struct ralink_pinmux_grp uart_mux[] = { ++static struct ralink_pinmux_grp uart_mux[] = { + { + .name = "uartf", + .mask = RT305X_GPIO_MODE_UARTF, +@@ -103,7 +103,7 @@ struct ralink_pinmux_grp uart_mux[] = { + }, {0} + }; + +-void rt305x_wdt_reset(void) ++static void rt305x_wdt_reset(void) + { + u32 t; + diff --git a/target/linux/ramips/patches-3.8/0109-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch b/target/linux/ramips/patches-3.8/0109-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch new file mode 100644 index 0000000000..36e187db2d --- /dev/null +++ b/target/linux/ramips/patches-3.8/0109-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch @@ -0,0 +1,26 @@ +From 61d50d9625dcb454759950ebd45a335c3aaacf84 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos +Date: Fri, 12 Apr 2013 12:40:23 +0200 +Subject: [PATCH 109/137] MIPS: ralink: add pci group to struct ralink_pinmux + +This will be used for RT3662/RT3883. + +Signed-off-by: Gabor Juhos +Acked-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/5173/ +--- + arch/mips/ralink/common.h | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/arch/mips/ralink/common.h ++++ b/arch/mips/ralink/common.h +@@ -23,6 +23,9 @@ struct ralink_pinmux { + struct ralink_pinmux_grp *uart; + int uart_shift; + void (*wdt_reset)(void); ++ struct ralink_pinmux_grp *pci; ++ int pci_shift; ++ u32 pci_mask; + }; + extern struct ralink_pinmux rt_gpio_pinmux; + diff --git a/target/linux/ramips/patches-3.8/0110-MIPS-add-rt3883-dts-files.patch b/target/linux/ramips/patches-3.8/0110-MIPS-add-rt3883-dts-files.patch deleted file mode 100644 index a99a1ec6a1..0000000000 --- a/target/linux/ramips/patches-3.8/0110-MIPS-add-rt3883-dts-files.patch +++ /dev/null @@ -1,282 +0,0 @@ -From 9d13fedc08f4e2cd9640983c2af8b9e9c64c094b Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 21 Mar 2013 18:37:00 +0100 -Subject: [PATCH 110/121] MIPS: add rt3883 dts files - -Add a dtsi file for RT3883 SoC. This SoC is almost the same as RT3050 but has -OHCI/EHCI in favour of the Synopsis DWC2 core. There is also a 3x3 802.11n -wifi core. - -Signed-off-by: John Crispin ---- - arch/mips/ralink/Kconfig | 4 + - arch/mips/ralink/dts/Makefile | 1 + - arch/mips/ralink/dts/rt3883.dtsi | 186 ++++++++++++++++++++++++++++++++++ - arch/mips/ralink/dts/rt3883_eval.dts | 52 ++++++++++ - 4 files changed, 243 insertions(+) - create mode 100644 arch/mips/ralink/dts/rt3883.dtsi - create mode 100644 arch/mips/ralink/dts/rt3883_eval.dts - ---- a/arch/mips/ralink/Kconfig -+++ b/arch/mips/ralink/Kconfig -@@ -39,6 +39,10 @@ choice - bool "RT305x eval kit" - depends on SOC_RT305X - -+ config DTB_RT3883_EVAL -+ bool "RT3883 eval kit" -+ depends on SOC_RT3883 -+ - endchoice - - endif ---- a/arch/mips/ralink/dts/Makefile -+++ b/arch/mips/ralink/dts/Makefile -@@ -1,2 +1,3 @@ - obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o - obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o -+obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o ---- /dev/null -+++ b/arch/mips/ralink/dts/rt3883.dtsi -@@ -0,0 +1,186 @@ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "ralink,rt3883-soc"; -+ -+ cpus { -+ cpu@0 { -+ compatible = "mips,mips74Kc"; -+ }; -+ }; -+ -+ chosen { -+ bootargs = "console=ttyS0,57600 init=/init"; -+ }; -+ -+ cpuintc: cpuintc@0 { -+ #address-cells = <0>; -+ #interrupt-cells = <1>; -+ interrupt-controller; -+ compatible = "mti,cpu-interrupt-controller"; -+ }; -+ -+ palmbus@10000000 { -+ compatible = "palmbus"; -+ reg = <0x10000000 0x200000>; -+ ranges = <0x0 0x10000000 0x1FFFFF>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ sysc@0 { -+ compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc"; -+ reg = <0x0 0x100>; -+ }; -+ -+ timer@100 { -+ compatible = "ralink,rt3883-timer", "ralink,rt2880-timer"; -+ reg = <0x100 0x20>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <1>; -+ -+ status = "disabled"; -+ }; -+ -+ watchdog@120 { -+ compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt"; -+ reg = <0x120 0x10>; -+ }; -+ -+ intc: intc@200 { -+ compatible = "ralink,rt3883-intc", "ralink,rt2880-intc"; -+ reg = <0x200 0x100>; -+ -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ -+ interrupt-parent = <&cpuintc>; -+ interrupts = <2>; -+ }; -+ -+ memc@300 { -+ compatible = "ralink,rt3883-memc", "ralink,rt3050-memc"; -+ reg = <0x300 0x100>; -+ }; -+ -+ gpio0: gpio@600 { -+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; -+ reg = <0x600 0x34>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ ralink,num-gpios = <24>; -+ ralink,register-map = [ 00 04 08 0c -+ 20 24 28 2c -+ 30 34 ]; -+ -+ status = "disabled"; -+ }; -+ -+ gpio1: gpio@638 { -+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; -+ reg = <0x638 0x24>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ ralink,num-gpios = <16>; -+ ralink,register-map = [ 00 04 08 0c -+ 10 14 18 1c -+ 20 24 ]; -+ -+ status = "disabled"; -+ }; -+ -+ gpio2: gpio@660 { -+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; -+ reg = <0x660 0x24>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ ralink,num-gpios = <32>; -+ ralink,register-map = [ 00 04 08 0c -+ 10 14 18 1c -+ 20 24 ]; -+ -+ status = "disabled"; -+ }; -+ -+ gpio3: gpio@688 { -+ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; -+ reg = <0x688 0x24>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ ralink,num-gpios = <24>; -+ ralink,register-map = [ 00 04 08 0c -+ 10 14 18 1c -+ 20 24 ]; -+ -+ status = "disabled"; -+ }; -+ -+ spi@b00 { -+ compatible = "ralink,rt3883-spi", "ralink,rt2880-spi"; -+ reg = <0xb00 0x100>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "disabled"; -+ }; -+ -+ uartlite@c00 { -+ compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a"; -+ reg = <0xc00 0x100>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <12>; -+ -+ reg-shift = <2>; -+ }; -+ }; -+ -+ ethernet@10100000 { -+ compatible = "ralink,rt3883-eth"; -+ reg = <0x10100000 10000>; -+ -+ interrupt-parent = <&cpuintc>; -+ interrupts = <5>; -+ -+ status = "disabled"; -+ }; -+ -+ wmac@10180000 { -+ compatible = "ralink,rt3883-wmac", "ralink,rt2880-wmac"; -+ reg = <0x10180000 40000>; -+ -+ interrupt-parent = <&cpuintc>; -+ interrupts = <6>; -+ -+ status = "disabled"; -+ }; -+ -+ ehci@101c0000 { -+ compatible = "ralink,rt3883-ehci", "ehci-platform"; -+ reg = <0x101c0000 0x1000>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <18>; -+ -+ status = "disabled"; -+ }; -+ -+ ohci@101c1000 { -+ compatible = "ralink,rt3883-ohci", "ohci-platform"; -+ reg = <0x101c1000 0x1000>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <18>; -+ -+ status = "disabled"; -+ }; -+}; ---- /dev/null -+++ b/arch/mips/ralink/dts/rt3883_eval.dts -@@ -0,0 +1,52 @@ -+/dts-v1/; -+ -+/include/ "rt3883.dtsi" -+ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "ralink,rt3883-eval-board", "ralink,rt3883-soc"; -+ model = "Ralink RT3883 evaluation board"; -+ -+ memory@0 { -+ reg = <0x0 0x4000000>; -+ }; -+ -+ palmbus@10000000 { -+ sysc@0 { -+ ralink,pinmux = "uartlite", "spi"; -+ ralink,uartmux = "gpio"; -+ ralink,wdtmux = <0>; -+ }; -+ }; -+ -+ cfi@1f000000 { -+ compatible = "cfi-flash"; -+ reg = <0x1f000000 0x800000>; -+ -+ bank-width = <2>; -+ device-width = <2>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "uboot"; -+ reg = <0x0 0x30000>; -+ read-only; -+ }; -+ partition@30000 { -+ label = "uboot-env"; -+ reg = <0x30000 0x10000>; -+ read-only; -+ }; -+ partition@40000 { -+ label = "calibration"; -+ reg = <0x40000 0x10000>; -+ read-only; -+ }; -+ partition@50000 { -+ label = "linux"; -+ reg = <0x50000 0x7b0000>; -+ }; -+ }; -+}; diff --git a/target/linux/ramips/patches-3.8/0110-MIPS-ralink-add-uart-mask-to-struct-ralink_pinmux.patch b/target/linux/ramips/patches-3.8/0110-MIPS-ralink-add-uart-mask-to-struct-ralink_pinmux.patch new file mode 100644 index 0000000000..d4474e1022 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0110-MIPS-ralink-add-uart-mask-to-struct-ralink_pinmux.patch @@ -0,0 +1,49 @@ +From faf5989efed503b2ee689dad82bb2d60da718d99 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Fri, 12 Apr 2013 12:45:27 +0200 +Subject: [PATCH 110/137] MIPS: ralink: add uart mask to struct ralink_pinmux + +Add a field for the uart muxing mask and set it inside the rt305x setup code. + +Signed-off-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/5744/ +--- + arch/mips/ralink/common.h | 1 + + arch/mips/ralink/rt305x.c | 5 +++-- + 2 files changed, 4 insertions(+), 2 deletions(-) + +--- a/arch/mips/ralink/common.h ++++ b/arch/mips/ralink/common.h +@@ -22,6 +22,7 @@ struct ralink_pinmux { + struct ralink_pinmux_grp *mode; + struct ralink_pinmux_grp *uart; + int uart_shift; ++ u32 uart_mask; + void (*wdt_reset)(void); + struct ralink_pinmux_grp *pci; + int pci_shift; +--- a/arch/mips/ralink/rt305x.c ++++ b/arch/mips/ralink/rt305x.c +@@ -91,12 +91,12 @@ static struct ralink_pinmux_grp uart_mux + .name = "gpio uartf", + .mask = RT305X_GPIO_MODE_GPIO_UARTF, + .gpio_first = RT305X_GPIO_7, +- .gpio_last = RT305X_GPIO_14, ++ .gpio_last = RT305X_GPIO_10, + }, { + .name = "gpio i2s", + .mask = RT305X_GPIO_MODE_GPIO_I2S, + .gpio_first = RT305X_GPIO_7, +- .gpio_last = RT305X_GPIO_14, ++ .gpio_last = RT305X_GPIO_10, + }, { + .name = "gpio", + .mask = RT305X_GPIO_MODE_GPIO, +@@ -118,6 +118,7 @@ struct ralink_pinmux rt_gpio_pinmux = { + .mode = mode_mux, + .uart = uart_mux, + .uart_shift = RT305X_GPIO_MODE_UART0_SHIFT, ++ .uart_mask = RT305X_GPIO_MODE_UART0_MASK, + .wdt_reset = rt305x_wdt_reset, + }; + diff --git a/target/linux/ramips/patches-3.8/0107-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch b/target/linux/ramips/patches-3.8/0111-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch similarity index 92% rename from target/linux/ramips/patches-3.8/0107-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch rename to target/linux/ramips/patches-3.8/0111-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch index 592f2af24c..9cfa509e54 100644 --- a/target/linux/ramips/patches-3.8/0107-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch +++ b/target/linux/ramips/patches-3.8/0111-MIPS-ralink-adds-support-for-RT2880-SoC-family.patch @@ -1,21 +1,23 @@ -From c4429f19cc66951962c171dba90b8747f95a654e Mon Sep 17 00:00:00 2001 +From cccb9a7b42227a442ca42d590c838c8b6fa0eba1 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Sun, 27 Jan 2013 09:17:20 +0100 -Subject: [PATCH V2 09/16] MIPS: ralink: adds support for RT2880 SoC family +Subject: [PATCH 111/137] MIPS: ralink: adds support for RT2880 SoC family Add support code for rt2880 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin +Signed-off-by: Gabor Juhos +Patchwork: http://patchwork.linux-mips.org/patch/5176/ --- arch/mips/Kconfig | 2 +- arch/mips/include/asm/mach-ralink/rt288x.h | 49 ++++++++++ arch/mips/ralink/Kconfig | 3 + arch/mips/ralink/Makefile | 1 + arch/mips/ralink/Platform | 5 + - arch/mips/ralink/rt288x.c | 143 ++++++++++++++++++++++++++++ - 6 files changed, 202 insertions(+), 1 deletion(-) + arch/mips/ralink/rt288x.c | 139 ++++++++++++++++++++++++++++ + 6 files changed, 198 insertions(+), 1 deletion(-) create mode 100644 arch/mips/include/asm/mach-ralink/rt288x.h create mode 100644 arch/mips/ralink/rt288x.c @@ -98,7 +100,7 @@ Signed-off-by: John Crispin +++ b/arch/mips/ralink/Makefile @@ -8,6 +8,7 @@ - obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o + obj-y := prom.o of.o reset.o clk.o irq.o +obj-$(CONFIG_SOC_RT288X) += rt288x.o obj-$(CONFIG_SOC_RT305X) += rt305x.o @@ -120,7 +122,7 @@ Signed-off-by: John Crispin load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000 --- /dev/null +++ b/arch/mips/ralink/rt288x.c -@@ -0,0 +1,143 @@ +@@ -0,0 +1,139 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -143,7 +145,7 @@ Signed-off-by: John Crispin + +#include "common.h" + -+struct ralink_pinmux_grp mode_mux[] = { ++static struct ralink_pinmux_grp mode_mux[] = { + { + .name = "i2c", + .mask = RT2880_GPIO_MODE_I2C, @@ -182,7 +184,7 @@ Signed-off-by: John Crispin + }, {0} +}; + -+void rt288x_wdt_reset(void) ++static void rt288x_wdt_reset(void) +{ + u32 t; + @@ -192,15 +194,11 @@ Signed-off-by: John Crispin + rt_sysc_w32(t, SYSC_REG_CLKCFG); +} + -+struct ralink_pinmux rt_pinmux = { ++struct ralink_pinmux rt_gpio_pinmux = { + .mode = mode_mux, + .wdt_reset = rt288x_wdt_reset, +}; + -+void ralink_usb_platform(void) -+{ -+} -+ +void __init ralink_clk_init(void) +{ + unsigned long cpu_rate; diff --git a/target/linux/ramips/patches-3.8/0112-MIPS-add-MT7620-dts-files.patch b/target/linux/ramips/patches-3.8/0112-MIPS-add-MT7620-dts-files.patch deleted file mode 100644 index 3ed8efc9a3..0000000000 --- a/target/linux/ramips/patches-3.8/0112-MIPS-add-MT7620-dts-files.patch +++ /dev/null @@ -1,204 +0,0 @@ -From 9c83b58b49f88a48565fad6acea921a0ae222856 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 21 Mar 2013 17:50:05 +0100 -Subject: [PATCH 112/121] MIPS: add MT7620 dts files - -Adds the dtsi file for MT7620 SoC. This is the latest and greatest SoC shipped -by Mediatek. - -Signed-off-by: John Crispin ---- - arch/mips/ralink/Kconfig | 4 + - arch/mips/ralink/dts/Makefile | 1 + - arch/mips/ralink/dts/mt7620.dtsi | 138 ++++++++++++++++++++++++++++++++++ - arch/mips/ralink/dts/mt7620_eval.dts | 22 ++++++ - 4 files changed, 165 insertions(+) - create mode 100644 arch/mips/ralink/dts/mt7620.dtsi - create mode 100644 arch/mips/ralink/dts/mt7620_eval.dts - ---- a/arch/mips/ralink/Kconfig -+++ b/arch/mips/ralink/Kconfig -@@ -46,6 +46,10 @@ choice - bool "RT3883 eval kit" - depends on SOC_RT3883 - -+ config DTB_MT7620_EVAL -+ bool "MT7620 eval kit" -+ depends on SOC_MT7620 -+ - endchoice - - endif ---- a/arch/mips/ralink/dts/Makefile -+++ b/arch/mips/ralink/dts/Makefile -@@ -1,3 +1,4 @@ - obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o - obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o - obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o -+obj-$(CONFIG_DTB_MT7620_EVAL) := mt7620_eval.dtb.o ---- /dev/null -+++ b/arch/mips/ralink/dts/mt7620.dtsi -@@ -0,0 +1,138 @@ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "ralink,mtk7620n-soc", "ralink,mt7620-soc"; -+ -+ cpus { -+ cpu@0 { -+ compatible = "mips,mips24KEc"; -+ }; -+ }; -+ -+ chosen { -+ bootargs = "console=ttyS0,57600 init=/init"; -+ }; -+ -+ cpuintc: cpuintc@0 { -+ #address-cells = <0>; -+ #interrupt-cells = <1>; -+ interrupt-controller; -+ compatible = "mti,cpu-interrupt-controller"; -+ }; -+ -+ palmbus@10000000 { -+ compatible = "palmbus"; -+ reg = <0x10000000 0x200000>; -+ ranges = <0x0 0x10000000 0x1FFFFF>; -+ -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ sysc@0 { -+ compatible = "ralink,mt7620-sysc", "ralink,mt7620n-sysc"; -+ reg = <0x0 0x100>; -+ }; -+ -+ timer@100 { -+ compatible = "ralink,mt7620-timer", "ralink,rt2880-timer"; -+ reg = <0x100 0x20>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <1>; -+ -+ status = "disabled"; -+ }; -+ -+ watchdog@120 { -+ compatible = "ralink,mt7620-wdt", "ralink,rt2880-wdt"; -+ reg = <0x120 0x10>; -+ }; -+ -+ intc: intc@200 { -+ compatible = "ralink,mt7620-intc", "ralink,rt2880-intc"; -+ reg = <0x200 0x100>; -+ -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ -+ interrupt-parent = <&cpuintc>; -+ interrupts = <2>; -+ }; -+ -+ memc@300 { -+ compatible = "ralink,mt7620-memc", "ralink,rt3050-memc"; -+ reg = <0x300 0x100>; -+ }; -+ -+ gpio0: gpio@600 { -+ compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio"; -+ reg = <0x600 0x34>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ ralink,num-gpios = <24>; -+ ralink,register-map = [ 00 04 08 0c -+ 20 24 28 2c -+ 30 34 ]; -+ }; -+ -+ gpio1: gpio@638 { -+ compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio"; -+ reg = <0x638 0x24>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ ralink,num-gpios = <16>; -+ ralink,register-map = [ 00 04 08 0c -+ 10 14 18 1c -+ 20 24 ]; -+ }; -+ -+ gpio2: gpio@660 { -+ compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio"; -+ reg = <0x660 0x24>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ ralink,num-gpios = <32>; -+ ralink,register-map = [ 00 04 08 0c -+ 10 14 18 1c -+ 20 24 ]; -+ }; -+ -+ gpio3: gpio@688 { -+ compatible = "ralink,mt7620-gpio", "ralink,rt2880-gpio"; -+ reg = <0x688 0x24>; -+ -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ ralink,num-gpios = <1>; -+ ralink,register-map = [ 00 04 08 0c -+ 10 14 18 1c -+ 20 24 ]; -+ }; -+ -+ spi@b00 { -+ compatible = "ralink,rt3883-spi", "ralink,rt2880-spi"; -+ reg = <0xb00 0x100>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ status = "disabled"; -+ }; -+ -+ uartlite@c00 { -+ compatible = "ralink,mt7620-uart", "ralink,rt2880-uart", "ns16550a"; -+ reg = <0xc00 0x100>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <12>; -+ -+ reg-shift = <2>; -+ }; -+ }; -+}; ---- /dev/null -+++ b/arch/mips/ralink/dts/mt7620_eval.dts -@@ -0,0 +1,22 @@ -+/dts-v1/; -+ -+/include/ "mt7620.dtsi" -+ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc"; -+ model = "Ralink MT7620 evaluation board"; -+ -+ memory@0 { -+ reg = <0x0 0x4000000>; -+ }; -+ -+ palmbus@10000000 { -+ sysc@0 { -+ ralink,pinmux = "uartlite", "spi"; -+ ralink,uartmux = "gpio"; -+ ralink,wdtmux = <0>; -+ }; -+ }; -+}; diff --git a/target/linux/ramips/patches-3.8/0109-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch b/target/linux/ramips/patches-3.8/0112-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch similarity index 91% rename from target/linux/ramips/patches-3.8/0109-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch rename to target/linux/ramips/patches-3.8/0112-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch index 3d822f4f52..f744e62248 100644 --- a/target/linux/ramips/patches-3.8/0109-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch +++ b/target/linux/ramips/patches-3.8/0112-MIPS-ralink-adds-support-for-RT3883-SoC-family.patch @@ -1,20 +1,22 @@ -From 45a8644332a85e8b099df9d467a719ded741e749 Mon Sep 17 00:00:00 2001 +From 5eb4dfe5072595e0706de3364f2da45378dbaca6 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Sun, 27 Jan 2013 09:39:02 +0100 -Subject: [PATCH 109/121] MIPS: ralink: adds support for RT3883 SoC family +Subject: [PATCH 112/137] MIPS: ralink: adds support for RT3883 SoC family Add support code for rt3883 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin +Signed-off-by: Gabor Juhos +Patchwork: http://patchwork.linux-mips.org/patch/5185/ --- arch/mips/include/asm/mach-ralink/rt3883.h | 247 ++++++++++++++++++++++++++++ arch/mips/ralink/Kconfig | 5 + arch/mips/ralink/Makefile | 1 + arch/mips/ralink/Platform | 5 + - arch/mips/ralink/rt3883.c | 207 +++++++++++++++++++++++ - 5 files changed, 465 insertions(+) + arch/mips/ralink/rt3883.c | 242 +++++++++++++++++++++++++++ + 5 files changed, 500 insertions(+) create mode 100644 arch/mips/include/asm/mach-ralink/rt3883.h create mode 100644 arch/mips/ralink/rt3883.c @@ -305,7 +307,7 @@ Signed-off-by: John Crispin +load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000 --- /dev/null +++ b/arch/mips/ralink/rt3883.c -@@ -0,0 +1,207 @@ +@@ -0,0 +1,242 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -328,7 +330,7 @@ Signed-off-by: John Crispin + +#include "common.h" + -+struct ralink_pinmux_grp mode_mux[] = { ++static struct ralink_pinmux_grp mode_mux[] = { + { + .name = "i2c", + .mask = RT3883_GPIO_MODE_I2C, @@ -382,7 +384,7 @@ Signed-off-by: John Crispin + }, {0} +}; + -+struct ralink_pinmux_grp uart_mux[] = { ++static struct ralink_pinmux_grp uart_mux[] = { + { + .name = "uartf", + .mask = RT3883_GPIO_MODE_UARTF, @@ -406,18 +408,50 @@ Signed-off-by: John Crispin + }, { + .name = "pcm gpio", + .mask = RT3883_GPIO_MODE_PCM_GPIO, -+ .gpio_first = RT3883_GPIO_10, ++ .gpio_first = RT3883_GPIO_11, + .gpio_last = RT3883_GPIO_14, + }, { + .name = "gpio uartf", + .mask = RT3883_GPIO_MODE_GPIO_UARTF, + .gpio_first = RT3883_GPIO_7, -+ .gpio_last = RT3883_GPIO_14, ++ .gpio_last = RT3883_GPIO_10, + }, { + .name = "gpio i2s", + .mask = RT3883_GPIO_MODE_GPIO_I2S, + .gpio_first = RT3883_GPIO_7, -+ .gpio_last = RT3883_GPIO_14, ++ .gpio_last = RT3883_GPIO_10, ++ }, { ++ .name = "gpio", ++ .mask = RT3883_GPIO_MODE_GPIO, ++ }, {0} ++}; ++ ++static struct ralink_pinmux_grp pci_mux[] = { ++ { ++ .name = "pci-dev", ++ .mask = 0, ++ .gpio_first = RT3883_GPIO_PCI_AD0, ++ .gpio_last = RT3883_GPIO_PCI_AD31, ++ }, { ++ .name = "pci-host2", ++ .mask = 1, ++ .gpio_first = RT3883_GPIO_PCI_AD0, ++ .gpio_last = RT3883_GPIO_PCI_AD31, ++ }, { ++ .name = "pci-host1", ++ .mask = 2, ++ .gpio_first = RT3883_GPIO_PCI_AD0, ++ .gpio_last = RT3883_GPIO_PCI_AD31, ++ }, { ++ .name = "pci-fnc", ++ .mask = 3, ++ .gpio_first = RT3883_GPIO_PCI_AD0, ++ .gpio_last = RT3883_GPIO_PCI_AD31, ++ }, { ++ .name = "pci-gpio", ++ .mask = 7, ++ .gpio_first = RT3883_GPIO_PCI_AD0, ++ .gpio_last = RT3883_GPIO_PCI_AD31, + }, {0} +}; + @@ -431,12 +465,15 @@ Signed-off-by: John Crispin + rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1); +} + -+struct ralink_pinmux rt_pinmux = { ++struct ralink_pinmux rt_gpio_pinmux = { + .mode = mode_mux, + .uart = uart_mux, + .uart_shift = RT3883_GPIO_MODE_UART0_SHIFT, + .uart_mask = RT3883_GPIO_MODE_GPIO, + .wdt_reset = rt3883_wdt_reset, ++ .pci = pci_mux, ++ .pci_shift = RT3883_GPIO_MODE_PCI_SHIFT, ++ .pci_mask = RT3883_GPIO_MODE_PCI_MASK, +}; + +void __init ralink_clk_init(void) diff --git a/target/linux/ramips/patches-3.8/0111-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch b/target/linux/ramips/patches-3.8/0113-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch similarity index 78% rename from target/linux/ramips/patches-3.8/0111-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch rename to target/linux/ramips/patches-3.8/0113-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch index 948d78c3b5..d52803413c 100644 --- a/target/linux/ramips/patches-3.8/0111-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch +++ b/target/linux/ramips/patches-3.8/0113-MIPS-ralink-adds-support-for-MT7620-SoC-family.patch @@ -1,26 +1,28 @@ -From 8831277e0167cdcf3dc3ecc5d5a67d4fd9d0ed77 Mon Sep 17 00:00:00 2001 +From a8d7045a9530d0a9e0c65c0f81852bd57ebde53c Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 21 Mar 2013 17:49:02 +0100 -Subject: [PATCH 111/121] MIPS: ralink: adds support for MT7620 SoC family +Subject: [PATCH 113/137] MIPS: ralink: adds support for MT7620 SoC family Add support code for mt7620 SOC. The code detects the SoC and registers the clk / pinmux settings. Signed-off-by: John Crispin +Acked-by: Gabor Juhos +Patchwork: http://patchwork.linux-mips.org/patch/5177/ --- - arch/mips/include/asm/mach-ralink/mt7620.h | 66 +++++++++ + arch/mips/include/asm/mach-ralink/mt7620.h | 76 ++++++++++ arch/mips/ralink/Kconfig | 3 + arch/mips/ralink/Makefile | 1 + arch/mips/ralink/Platform | 5 + - arch/mips/ralink/mt7620.c | 215 ++++++++++++++++++++++++++++ - 5 files changed, 290 insertions(+) + arch/mips/ralink/mt7620.c | 214 ++++++++++++++++++++++++++++ + 5 files changed, 299 insertions(+) create mode 100644 arch/mips/include/asm/mach-ralink/mt7620.h create mode 100644 arch/mips/ralink/mt7620.c --- /dev/null +++ b/arch/mips/include/asm/mach-ralink/mt7620.h -@@ -0,0 +1,66 @@ +@@ -0,0 +1,76 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -58,10 +60,20 @@ Signed-off-by: John Crispin +#define CHIP_REV_VER_SHIFT 8 +#define CHIP_REV_ECO_MASK 0xf + -+#define MT7620_CPLL_SW_CONFIG_SHIFT 31 -+#define MT7620_CPLL_SW_CONFIG_MASK 0x1 -+#define MT7620_CPLL_CPU_CLK_SHIFT 24 -+#define MT7620_CPLL_CPU_CLK_MASK 0x1 ++#define CPLL_SW_CONFIG_SHIFT 31 ++#define CPLL_SW_CONFIG_MASK 0x1 ++#define CPLL_CPU_CLK_SHIFT 24 ++#define CPLL_CPU_CLK_MASK 0x1 ++#define CPLL_MULT_RATIO_SHIFT 16 ++#define CPLL_MULT_RATIO 0x7 ++#define CPLL_DIV_RATIO_SHIFT 10 ++#define CPLL_DIV_RATIO 0x3 ++ ++#define SYSCFG0_DRAM_TYPE_MASK 0x3 ++#define SYSCFG0_DRAM_TYPE_SHIFT 4 ++#define SYSCFG0_DRAM_TYPE_SDRAM 0 ++#define SYSCFG0_DRAM_TYPE_DDR1 1 ++#define SYSCFG0_DRAM_TYPE_DDR2 2 + +#define MT7620_GPIO_MODE_I2C BIT(0) +#define MT7620_GPIO_MODE_UART0_SHIFT 2 @@ -122,7 +134,7 @@ Signed-off-by: John Crispin +load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000 --- /dev/null +++ b/arch/mips/ralink/mt7620.c -@@ -0,0 +1,215 @@ +@@ -0,0 +1,214 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -145,8 +157,13 @@ Signed-off-by: John Crispin + +#include "common.h" + ++/* does the board have sdram or ddram */ ++static int dram_type; ++ ++/* the pll dividers */ ++static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 }; + -+struct ralink_pinmux_grp mode_mux[] = { ++static struct ralink_pinmux_grp mode_mux[] = { + { + .name = "i2c", + .mask = MT7620_GPIO_MODE_I2C, @@ -211,8 +228,7 @@ Signed-off-by: John Crispin + }, {0} +}; + -+ -+struct ralink_pinmux_grp uart_mux[] = { ++static struct ralink_pinmux_grp uart_mux[] = { + { + .name = "uartf", + .mask = MT7620_GPIO_MODE_UARTF, @@ -253,22 +269,12 @@ Signed-off-by: John Crispin + .mask = MT7620_GPIO_MODE_GPIO, + }, {0} +}; -+/* -+void rt305x_wdt_reset(void) -+{ -+ u32 t; + -+ t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); -+ t |= RT305X_SYSCFG_SRAM_CS0_MODE_WDT << -+ RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT; -+ rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG); -+} -+*/ -+struct ralink_pinmux rt_pinmux = { ++struct ralink_pinmux rt_gpio_pinmux = { + .mode = mode_mux, + .uart = uart_mux, + .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT, -+// .wdt_reset = rt305x_wdt_reset, ++ .uart_mask = MT7620_GPIO_MODE_GPIO, +}; + +void __init ralink_clk_init(void) @@ -276,23 +282,24 @@ Signed-off-by: John Crispin + unsigned long cpu_rate, sys_rate; + u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0); + u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1); ++ u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK; ++ u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK; + -+ c0 = (c0 >> MT7620_CPLL_SW_CONFIG_SHIFT) & -+ MT7620_CPLL_SW_CONFIG_MASK; -+ c1 = (c1 >> MT7620_CPLL_CPU_CLK_SHIFT) & -+ MT7620_CPLL_CPU_CLK_MASK; -+ if (c1 == 0x01) { ++ if (cpu_clk) { + cpu_rate = 480000000; ++ } else if (!swconfig) { ++ cpu_rate = 600000000; + } else { -+ if (c1 == 0x0) { -+ cpu_rate = 600000000; -+ } else { -+ /* TODO calculate custom clock from pll settings */ -+ BUG(); -+ } ++ u32 m = (c0 >> CPLL_MULT_RATIO_SHIFT) & CPLL_MULT_RATIO; ++ u32 d = (c0 >> CPLL_DIV_RATIO_SHIFT) & CPLL_DIV_RATIO; ++ ++ cpu_rate = ((40 * (m + 24)) / mt7620_clk_divider[d]) * 1000000; + } -+ /* FIXME SDR - 4, DDR - 3 */ -+ sys_rate = cpu_rate / 4; ++ ++ if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM) ++ sys_rate = cpu_rate / 4; ++ else ++ sys_rate = cpu_rate / 3; + + ralink_clk_add("cpu", cpu_rate); + ralink_clk_add("10000100.timer", 40000000); @@ -302,8 +309,8 @@ Signed-off-by: John Crispin + +void __init ralink_of_remap(void) +{ -+ rt_sysc_membase = plat_of_remap_node("ralink,mt7620-sysc"); -+ rt_memc_membase = plat_of_remap_node("ralink,mt7620-memc"); ++ rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc"); ++ rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc"); + + if (!rt_sysc_membase || !rt_memc_membase) + panic("Failed to remap core resources"); @@ -316,6 +323,7 @@ Signed-off-by: John Crispin + u32 n0; + u32 n1; + u32 rev; ++ u32 cfg0; + + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); + n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); @@ -327,7 +335,7 @@ Signed-off-by: John Crispin + name = "MT7620A"; + soc_info->compatible = "ralink,mt7620a-soc"; + } else { -+ printk("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1); ++ panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1); + } + + rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); @@ -337,4 +345,7 @@ Signed-off-by: John Crispin + name, + (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK, + (rev & CHIP_REV_ECO_MASK)); ++ ++ cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0); ++ dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK; +} diff --git a/target/linux/ramips/patches-3.8/0114-MIPS-ralink-add-cpu-feature-overrides.h.patch b/target/linux/ramips/patches-3.8/0114-MIPS-ralink-add-cpu-feature-overrides.h.patch new file mode 100644 index 0000000000..dc5dab98a1 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0114-MIPS-ralink-add-cpu-feature-overrides.h.patch @@ -0,0 +1,218 @@ +From 33c525913af22d1b799a7218ee48579c22a50cf8 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos +Date: Wed, 10 Apr 2013 09:19:07 +0200 +Subject: [PATCH 114/137] MIPS: ralink: add cpu-feature-overrides.h + +Add cpu-feature-overrides.h for RT288x, RT305x and RT3883. + +Signed-off-by: Gabor Juhos +Signed-off-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/5175/ +--- + .../asm/mach-ralink/rt288x/cpu-feature-overrides.h | 56 ++++++++++++++++++++ + .../asm/mach-ralink/rt305x/cpu-feature-overrides.h | 56 ++++++++++++++++++++ + .../asm/mach-ralink/rt3883/cpu-feature-overrides.h | 55 +++++++++++++++++++ + arch/mips/ralink/Platform | 3 ++ + 4 files changed, 170 insertions(+) + create mode 100644 arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h + create mode 100644 arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h + create mode 100644 arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h + +--- /dev/null ++++ b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h +@@ -0,0 +1,56 @@ ++/* ++ * Ralink RT288x specific CPU feature overrides ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This file was derived from: include/asm-mips/cpu-features.h ++ * Copyright (C) 2003, 2004 Ralf Baechle ++ * Copyright (C) 2004 Maciej W. Rozycki ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ */ ++#ifndef _RT288X_CPU_FEATURE_OVERRIDES_H ++#define _RT288X_CPU_FEATURE_OVERRIDES_H ++ ++#define cpu_has_tlb 1 ++#define cpu_has_4kex 1 ++#define cpu_has_3k_cache 0 ++#define cpu_has_4k_cache 1 ++#define cpu_has_tx39_cache 0 ++#define cpu_has_sb1_cache 0 ++#define cpu_has_fpu 0 ++#define cpu_has_32fpr 0 ++#define cpu_has_counter 1 ++#define cpu_has_watch 1 ++#define cpu_has_divec 1 ++ ++#define cpu_has_prefetch 1 ++#define cpu_has_ejtag 1 ++#define cpu_has_llsc 1 ++ ++#define cpu_has_mips16 1 ++#define cpu_has_mdmx 0 ++#define cpu_has_mips3d 0 ++#define cpu_has_smartmips 0 ++ ++#define cpu_has_mips32r1 1 ++#define cpu_has_mips32r2 1 ++#define cpu_has_mips64r1 0 ++#define cpu_has_mips64r2 0 ++ ++#define cpu_has_dsp 0 ++#define cpu_has_mipsmt 0 ++ ++#define cpu_has_64bits 0 ++#define cpu_has_64bit_zero_reg 0 ++#define cpu_has_64bit_gp_regs 0 ++#define cpu_has_64bit_addresses 0 ++ ++#define cpu_dcache_line_size() 16 ++#define cpu_icache_line_size() 16 ++ ++#endif /* _RT288X_CPU_FEATURE_OVERRIDES_H */ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h +@@ -0,0 +1,56 @@ ++/* ++ * Ralink RT305x specific CPU feature overrides ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos ++ * Copyright (C) 2008 Imre Kaloz ++ * ++ * This file was derived from: include/asm-mips/cpu-features.h ++ * Copyright (C) 2003, 2004 Ralf Baechle ++ * Copyright (C) 2004 Maciej W. Rozycki ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ */ ++#ifndef _RT305X_CPU_FEATURE_OVERRIDES_H ++#define _RT305X_CPU_FEATURE_OVERRIDES_H ++ ++#define cpu_has_tlb 1 ++#define cpu_has_4kex 1 ++#define cpu_has_3k_cache 0 ++#define cpu_has_4k_cache 1 ++#define cpu_has_tx39_cache 0 ++#define cpu_has_sb1_cache 0 ++#define cpu_has_fpu 0 ++#define cpu_has_32fpr 0 ++#define cpu_has_counter 1 ++#define cpu_has_watch 1 ++#define cpu_has_divec 1 ++ ++#define cpu_has_prefetch 1 ++#define cpu_has_ejtag 1 ++#define cpu_has_llsc 1 ++ ++#define cpu_has_mips16 1 ++#define cpu_has_mdmx 0 ++#define cpu_has_mips3d 0 ++#define cpu_has_smartmips 0 ++ ++#define cpu_has_mips32r1 1 ++#define cpu_has_mips32r2 1 ++#define cpu_has_mips64r1 0 ++#define cpu_has_mips64r2 0 ++ ++#define cpu_has_dsp 1 ++#define cpu_has_mipsmt 0 ++ ++#define cpu_has_64bits 0 ++#define cpu_has_64bit_zero_reg 0 ++#define cpu_has_64bit_gp_regs 0 ++#define cpu_has_64bit_addresses 0 ++ ++#define cpu_dcache_line_size() 32 ++#define cpu_icache_line_size() 32 ++ ++#endif /* _RT305X_CPU_FEATURE_OVERRIDES_H */ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h +@@ -0,0 +1,55 @@ ++/* ++ * Ralink RT3662/RT3883 specific CPU feature overrides ++ * ++ * Copyright (C) 2011-2013 Gabor Juhos ++ * ++ * This file was derived from: include/asm-mips/cpu-features.h ++ * Copyright (C) 2003, 2004 Ralf Baechle ++ * Copyright (C) 2004 Maciej W. Rozycki ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ */ ++#ifndef _RT3883_CPU_FEATURE_OVERRIDES_H ++#define _RT3883_CPU_FEATURE_OVERRIDES_H ++ ++#define cpu_has_tlb 1 ++#define cpu_has_4kex 1 ++#define cpu_has_3k_cache 0 ++#define cpu_has_4k_cache 1 ++#define cpu_has_tx39_cache 0 ++#define cpu_has_sb1_cache 0 ++#define cpu_has_fpu 0 ++#define cpu_has_32fpr 0 ++#define cpu_has_counter 1 ++#define cpu_has_watch 1 ++#define cpu_has_divec 1 ++ ++#define cpu_has_prefetch 1 ++#define cpu_has_ejtag 1 ++#define cpu_has_llsc 1 ++ ++#define cpu_has_mips16 1 ++#define cpu_has_mdmx 0 ++#define cpu_has_mips3d 0 ++#define cpu_has_smartmips 0 ++ ++#define cpu_has_mips32r1 1 ++#define cpu_has_mips32r2 1 ++#define cpu_has_mips64r1 0 ++#define cpu_has_mips64r2 0 ++ ++#define cpu_has_dsp 1 ++#define cpu_has_mipsmt 0 ++ ++#define cpu_has_64bits 0 ++#define cpu_has_64bit_zero_reg 0 ++#define cpu_has_64bit_gp_regs 0 ++#define cpu_has_64bit_addresses 0 ++ ++#define cpu_dcache_line_size() 32 ++#define cpu_icache_line_size() 32 ++ ++#endif /* _RT3883_CPU_FEATURE_OVERRIDES_H */ +--- a/arch/mips/ralink/Platform ++++ b/arch/mips/ralink/Platform +@@ -8,16 +8,19 @@ cflags-$(CONFIG_RALINK) += -I$(srctree) + # Ralink RT288x + # + load-$(CONFIG_SOC_RT288X) += 0xffffffff88000000 ++cflags-$(CONFIG_SOC_RT288X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt288x + + # + # Ralink RT305x + # + load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000 ++cflags-$(CONFIG_SOC_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x + + # + # Ralink RT3883 + # + load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000 ++cflags-$(CONFIG_SOC_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883 + + # + # Ralink MT7620 diff --git a/target/linux/ramips/patches-3.8/0115-DT-add-vendor-prefixes-for-Ralink.patch b/target/linux/ramips/patches-3.8/0115-DT-add-vendor-prefixes-for-Ralink.patch new file mode 100644 index 0000000000..a9a99b4cae --- /dev/null +++ b/target/linux/ramips/patches-3.8/0115-DT-add-vendor-prefixes-for-Ralink.patch @@ -0,0 +1,21 @@ +From 9377ecb9f1fb5da25a0fbd324e7add7644b1d43d Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sat, 13 Apr 2013 10:11:51 +0200 +Subject: [PATCH 115/137] DT: add vendor prefixes for Ralink + +Signed-off-by: John Crispin +Acked-by: Grant Likely +--- + Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + + 1 file changed, 1 insertion(+) + +--- a/Documentation/devicetree/bindings/vendor-prefixes.txt ++++ b/Documentation/devicetree/bindings/vendor-prefixes.txt +@@ -40,6 +40,7 @@ onnn ON Semiconductor Corp. + picochip Picochip Ltd + powervr PowerVR (deprecated, use img) + qcom Qualcomm, Inc. ++ralink Mediatek/Ralink Technology Corp. + ramtron Ramtron International + realtek Realtek Semiconductor Corp. + samsung Samsung Semiconductor diff --git a/target/linux/ramips/patches-3.8/0116-DT-add-documentation-for-the-Ralink-MIPS-SoCs.patch b/target/linux/ramips/patches-3.8/0116-DT-add-documentation-for-the-Ralink-MIPS-SoCs.patch new file mode 100644 index 0000000000..f9463c4cb0 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0116-DT-add-documentation-for-the-Ralink-MIPS-SoCs.patch @@ -0,0 +1,38 @@ +From fed1ff0d85b481bb3dbebf31e0720d65ce4170c9 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos +Date: Sat, 13 Apr 2013 09:02:40 +0200 +Subject: [PATCH 116/137] DT: add documentation for the Ralink MIPS SoCs + +This patch adds binding documentation for the +compatible values of the Ralink MIPS SoCs. + +Signed-off-by: Gabor Juhos +Signed-off-by: John Crispin +Acked-by: Grant Likely +Patchwork: http://patchwork.linux-mips.org/patch/5187/ +--- + Documentation/devicetree/bindings/mips/ralink.txt | 18 ++++++++++++++++++ + 1 file changed, 18 insertions(+) + create mode 100644 Documentation/devicetree/bindings/mips/ralink.txt + +--- /dev/null ++++ b/Documentation/devicetree/bindings/mips/ralink.txt +@@ -0,0 +1,18 @@ ++Ralink MIPS SoC device tree bindings ++ ++1. SoCs ++ ++Each device tree must specify a compatible value for the Ralink SoC ++it uses in the compatible property of the root node. The compatible ++value must be one of the following values: ++ ++ ralink,rt2880-soc ++ ralink,rt3050-soc ++ ralink,rt3052-soc ++ ralink,rt3350-soc ++ ralink,rt3352-soc ++ ralink,rt3883-soc ++ ralink,rt5350-soc ++ ralink,mt7620a-soc ++ ralink,mt7620n-soc ++ diff --git a/target/linux/ramips/patches-3.8/0117-DT-MIPS-ralink-clean-up-RT3050-dtsi-and-dts-file.patch b/target/linux/ramips/patches-3.8/0117-DT-MIPS-ralink-clean-up-RT3050-dtsi-and-dts-file.patch new file mode 100644 index 0000000000..1328b432a8 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0117-DT-MIPS-ralink-clean-up-RT3050-dtsi-and-dts-file.patch @@ -0,0 +1,117 @@ +From 7a30e00a278fe94ac8e42d0967ffde99d1ab74ee Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 21 Mar 2013 17:47:07 +0100 +Subject: [PATCH 117/137] DT: MIPS: ralink: clean up RT3050 dtsi and dts file + +* remove nodes for cores whose drivers are not upstream yet +* add compat string for an additional soc +* fix a whitespace error + +Signed-off-by: John Crispin +Acked-by: Grant Likely +Patchwork: http://patchwork.linux-mips.org/patch/5186/ +--- + arch/mips/ralink/dts/rt3050.dtsi | 52 ++-------------------------------- + arch/mips/ralink/dts/rt3052_eval.dts | 10 ++----- + 2 files changed, 4 insertions(+), 58 deletions(-) + +--- a/arch/mips/ralink/dts/rt3050.dtsi ++++ b/arch/mips/ralink/dts/rt3050.dtsi +@@ -1,7 +1,7 @@ + / { + #address-cells = <1>; + #size-cells = <1>; +- compatible = "ralink,rt3050-soc", "ralink,rt3052-soc"; ++ compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc"; + + cpus { + cpu@0 { +@@ -9,10 +9,6 @@ + }; + }; + +- chosen { +- bootargs = "console=ttyS0,57600 init=/init"; +- }; +- + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; +@@ -23,7 +19,7 @@ + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; +- ranges = <0x0 0x10000000 0x1FFFFF>; ++ ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; +@@ -33,11 +29,6 @@ + reg = <0x0 0x100>; + }; + +- timer@100 { +- compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt"; +- reg = <0x100 0x100>; +- }; +- + intc: intc@200 { + compatible = "ralink,rt3052-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; +@@ -54,45 +45,6 @@ + reg = <0x300 0x100>; + }; + +- gpio0: gpio@600 { +- compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; +- reg = <0x600 0x34>; +- +- gpio-controller; +- #gpio-cells = <2>; +- +- ralink,ngpio = <24>; +- ralink,regs = [ 00 04 08 0c +- 20 24 28 2c +- 30 34 ]; +- }; +- +- gpio1: gpio@638 { +- compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; +- reg = <0x638 0x24>; +- +- gpio-controller; +- #gpio-cells = <2>; +- +- ralink,ngpio = <16>; +- ralink,regs = [ 00 04 08 0c +- 10 14 18 1c +- 20 24 ]; +- }; +- +- gpio2: gpio@660 { +- compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; +- reg = <0x660 0x24>; +- +- gpio-controller; +- #gpio-cells = <2>; +- +- ralink,ngpio = <12>; +- ralink,regs = [ 00 04 08 0c +- 10 14 18 1c +- 20 24 ]; +- }; +- + uartlite@c00 { + compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; +--- a/arch/mips/ralink/dts/rt3052_eval.dts ++++ b/arch/mips/ralink/dts/rt3052_eval.dts +@@ -3,8 +3,6 @@ + /include/ "rt3050.dtsi" + + / { +- #address-cells = <1>; +- #size-cells = <1>; + compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc"; + model = "Ralink RT3052 evaluation board"; + diff --git a/target/linux/ramips/patches-3.8/0118-DT-MIPS-ralink-add-RT2880-dts-files.patch b/target/linux/ramips/patches-3.8/0118-DT-MIPS-ralink-add-RT2880-dts-files.patch new file mode 100644 index 0000000000..8ad9b18eb8 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0118-DT-MIPS-ralink-add-RT2880-dts-files.patch @@ -0,0 +1,147 @@ +From b39e659770cb71939765de8c9e73c0a0cfa832db Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Fri, 12 Apr 2013 06:27:37 +0000 +Subject: [PATCH 118/137] DT: MIPS: ralink: add RT2880 dts files + +Add a dtsi file for RT2880 SoC and a sample dts file. + +Signed-off-by: John Crispin +Acked-by: Grant Likely +Patchwork: http://patchwork.linux-mips.org/patch/5188/ +--- + arch/mips/ralink/Kconfig | 4 +++ + arch/mips/ralink/dts/Makefile | 1 + + arch/mips/ralink/dts/rt2880.dtsi | 58 ++++++++++++++++++++++++++++++++++ + arch/mips/ralink/dts/rt2880_eval.dts | 46 +++++++++++++++++++++++++++ + 4 files changed, 109 insertions(+) + create mode 100644 arch/mips/ralink/dts/rt2880.dtsi + create mode 100644 arch/mips/ralink/dts/rt2880_eval.dts + +--- a/arch/mips/ralink/Kconfig ++++ b/arch/mips/ralink/Kconfig +@@ -34,6 +34,10 @@ choice + config DTB_RT_NONE + bool "None" + ++ config DTB_RT2880_EVAL ++ bool "RT2880 eval kit" ++ depends on SOC_RT288X ++ + config DTB_RT305X_EVAL + bool "RT305x eval kit" + depends on SOC_RT305X +--- a/arch/mips/ralink/dts/Makefile ++++ b/arch/mips/ralink/dts/Makefile +@@ -1 +1,2 @@ ++obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o + obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o +--- /dev/null ++++ b/arch/mips/ralink/dts/rt2880.dtsi +@@ -0,0 +1,58 @@ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "ralink,rt2880-soc"; ++ ++ cpus { ++ cpu@0 { ++ compatible = "mips,mips4KEc"; ++ }; ++ }; ++ ++ cpuintc: cpuintc@0 { ++ #address-cells = <0>; ++ #interrupt-cells = <1>; ++ interrupt-controller; ++ compatible = "mti,cpu-interrupt-controller"; ++ }; ++ ++ palmbus@300000 { ++ compatible = "palmbus"; ++ reg = <0x300000 0x200000>; ++ ranges = <0x0 0x300000 0x1FFFFF>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ sysc@0 { ++ compatible = "ralink,rt2880-sysc"; ++ reg = <0x0 0x100>; ++ }; ++ ++ intc: intc@200 { ++ compatible = "ralink,rt2880-intc"; ++ reg = <0x200 0x100>; ++ ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ ++ interrupt-parent = <&cpuintc>; ++ interrupts = <2>; ++ }; ++ ++ memc@300 { ++ compatible = "ralink,rt2880-memc"; ++ reg = <0x300 0x100>; ++ }; ++ ++ uartlite@c00 { ++ compatible = "ralink,rt2880-uart", "ns16550a"; ++ reg = <0xc00 0x100>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <8>; ++ ++ reg-shift = <2>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/mips/ralink/dts/rt2880_eval.dts +@@ -0,0 +1,46 @@ ++/dts-v1/; ++ ++/include/ "rt2880.dtsi" ++ ++/ { ++ compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc"; ++ model = "Ralink RT2880 evaluation board"; ++ ++ memory@0 { ++ reg = <0x8000000 0x2000000>; ++ }; ++ ++ chosen { ++ bootargs = "console=ttyS0,57600"; ++ }; ++ ++ cfi@1f000000 { ++ compatible = "cfi-flash"; ++ reg = <0x1f000000 0x400000>; ++ ++ bank-width = <2>; ++ device-width = <2>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "uboot"; ++ reg = <0x0 0x30000>; ++ read-only; ++ }; ++ partition@30000 { ++ label = "uboot-env"; ++ reg = <0x30000 0x10000>; ++ read-only; ++ }; ++ partition@40000 { ++ label = "calibration"; ++ reg = <0x40000 0x10000>; ++ read-only; ++ }; ++ partition@50000 { ++ label = "linux"; ++ reg = <0x50000 0x3b0000>; ++ }; ++ }; ++}; diff --git a/target/linux/ramips/patches-3.8/0119-DT-MIPS-ralink-add-RT3883-dts-files.patch b/target/linux/ramips/patches-3.8/0119-DT-MIPS-ralink-add-RT3883-dts-files.patch new file mode 100644 index 0000000000..90b50eda72 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0119-DT-MIPS-ralink-add-RT3883-dts-files.patch @@ -0,0 +1,118 @@ +From 8b02459b5aa171dc8726698c4b19341a4e441bb8 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Fri, 12 Apr 2013 06:27:39 +0000 +Subject: [PATCH 119/137] DT: MIPS: ralink: add RT3883 dts files + +Add a dtsi file for RT3883 SoC and a sample dts file. + +Signed-off-by: John Crispin +Acked-by: Grant Likely +Patchwork: http://patchwork.linux-mips.org/patch/5189/ +--- + arch/mips/ralink/Kconfig | 4 +++ + arch/mips/ralink/dts/Makefile | 1 + + arch/mips/ralink/dts/rt3883.dtsi | 58 ++++++++++++++++++++++++++++++++++ + arch/mips/ralink/dts/rt3883_eval.dts | 16 ++++++++++ + 4 files changed, 79 insertions(+) + create mode 100644 arch/mips/ralink/dts/rt3883.dtsi + create mode 100644 arch/mips/ralink/dts/rt3883_eval.dts + +--- a/arch/mips/ralink/Kconfig ++++ b/arch/mips/ralink/Kconfig +@@ -42,6 +42,10 @@ choice + bool "RT305x eval kit" + depends on SOC_RT305X + ++ config DTB_RT3883_EVAL ++ bool "RT3883 eval kit" ++ depends on SOC_RT3883 ++ + endchoice + + endif +--- a/arch/mips/ralink/dts/Makefile ++++ b/arch/mips/ralink/dts/Makefile +@@ -1,2 +1,3 @@ + obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o + obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o ++obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o +--- /dev/null ++++ b/arch/mips/ralink/dts/rt3883.dtsi +@@ -0,0 +1,58 @@ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "ralink,rt3883-soc"; ++ ++ cpus { ++ cpu@0 { ++ compatible = "mips,mips74Kc"; ++ }; ++ }; ++ ++ cpuintc: cpuintc@0 { ++ #address-cells = <0>; ++ #interrupt-cells = <1>; ++ interrupt-controller; ++ compatible = "mti,cpu-interrupt-controller"; ++ }; ++ ++ palmbus@10000000 { ++ compatible = "palmbus"; ++ reg = <0x10000000 0x200000>; ++ ranges = <0x0 0x10000000 0x1FFFFF>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ sysc@0 { ++ compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc"; ++ reg = <0x0 0x100>; ++ }; ++ ++ intc: intc@200 { ++ compatible = "ralink,rt3883-intc", "ralink,rt2880-intc"; ++ reg = <0x200 0x100>; ++ ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ ++ interrupt-parent = <&cpuintc>; ++ interrupts = <2>; ++ }; ++ ++ memc@300 { ++ compatible = "ralink,rt3883-memc", "ralink,rt3050-memc"; ++ reg = <0x300 0x100>; ++ }; ++ ++ uartlite@c00 { ++ compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a"; ++ reg = <0xc00 0x100>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <12>; ++ ++ reg-shift = <2>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/mips/ralink/dts/rt3883_eval.dts +@@ -0,0 +1,16 @@ ++/dts-v1/; ++ ++/include/ "rt3883.dtsi" ++ ++/ { ++ compatible = "ralink,rt3883-eval-board", "ralink,rt3883-soc"; ++ model = "Ralink RT3883 evaluation board"; ++ ++ memory@0 { ++ reg = <0x0 0x2000000>; ++ }; ++ ++ chosen { ++ bootargs = "console=ttyS0,57600"; ++ }; ++}; diff --git a/target/linux/ramips/patches-3.8/0119-PCI-MIPS-adds-rt3883-pci-support.patch b/target/linux/ramips/patches-3.8/0119-PCI-MIPS-adds-rt3883-pci-support.patch deleted file mode 100644 index 32fd20960f..0000000000 --- a/target/linux/ramips/patches-3.8/0119-PCI-MIPS-adds-rt3883-pci-support.patch +++ /dev/null @@ -1,525 +0,0 @@ -From f01830fcc57273bd9ec5f6733ab3d28adeb71955 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 21 Mar 2013 17:34:08 +0100 -Subject: [PATCH 119/121] PCI: MIPS: adds rt3883 pci support - -Add support for the pcie found on the rt3883 SoC. - -Signed-off-by: John Crispin ---- - arch/mips/pci/Makefile | 1 + - arch/mips/pci/pci-rt3883.c | 487 ++++++++++++++++++++++++++++++++++++++++++++ - arch/mips/ralink/Kconfig | 1 + - 3 files changed, 489 insertions(+) - create mode 100644 arch/mips/pci/pci-rt3883.c - ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -43,6 +43,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops - obj-$(CONFIG_LANTIQ) += fixup-lantiq.o - obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o - obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o -+obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o - obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o - obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o - obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o ---- /dev/null -+++ b/arch/mips/pci/pci-rt3883.c -@@ -0,0 +1,487 @@ -+/* -+ * Ralink RT3883 SoC PCI support -+ * -+ * Copyright (C) 2011-2012 Gabor Juhos -+ * -+ * Parts of this file are based on Ralink's 2.6.21 BSP -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#define RT3883_MEMORY_BASE 0x00000000 -+#define RT3883_MEMORY_SIZE 0x02000000 -+ -+#define RT3883_PCI_MEM_BASE 0x20000000 -+#define RT3883_PCI_MEM_SIZE 0x10000000 -+#define RT3883_PCI_IO_BASE 0x10160000 -+#define RT3883_PCI_IO_SIZE 0x00010000 -+ -+#define RT3883_PCI_REG_PCICFG_ADDR 0x00 -+#define RT3883_PCI_REG_PCIRAW_ADDR 0x04 -+#define RT3883_PCI_REG_PCIINT_ADDR 0x08 -+#define RT3883_PCI_REG_PCIMSK_ADDR 0x0c -+#define RT3833_PCI_PCIINT_PCIE BIT(20) -+#define RT3833_PCI_PCIINT_PCI1 BIT(19) -+#define RT3833_PCI_PCIINT_PCI0 BIT(18) -+ -+#define RT3883_PCI_REG_CONFIG_ADDR 0x20 -+#define RT3883_PCI_REG_CONFIG_DATA 0x24 -+#define RT3883_PCI_REG_MEMBASE 0x28 -+#define RT3883_PCI_REG_IOBASE 0x2c -+#define RT3883_PCI_REG_ARBCTL 0x80 -+ -+#define RT3883_PCI_REG_BASE(_x) (0x1000 + (_x) * 0x1000) -+#define RT3883_PCI_REG_BAR0SETUP_ADDR(_x) (RT3883_PCI_REG_BASE((_x)) + 0x10) -+#define RT3883_PCI_REG_IMBASEBAR0_ADDR(_x) (RT3883_PCI_REG_BASE((_x)) + 0x18) -+#define RT3883_PCI_REG_ID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x30) -+#define RT3883_PCI_REG_CLASS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x34) -+#define RT3883_PCI_REG_SUBID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x38) -+#define RT3883_PCI_REG_STATUS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x50) -+ -+static int (*rt3883_pci_plat_dev_init)(struct pci_dev *dev); -+static void __iomem *rt3883_pci_base; -+static DEFINE_SPINLOCK(rt3883_pci_lock); -+ -+static inline u32 rt3883_pci_rr(unsigned reg) -+{ -+ return readl(rt3883_pci_base + reg); -+} -+ -+static inline void rt3883_pci_wr(u32 val, unsigned reg) -+{ -+ writel(val, rt3883_pci_base + reg); -+} -+ -+static inline u32 rt3883_pci_get_cfgaddr(unsigned int bus, unsigned int slot, -+ unsigned int func, unsigned int where) -+{ -+ return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | -+ 0x80000000); -+} -+ -+static u32 rt3883_pci_read_u32(unsigned bus, unsigned slot, -+ unsigned func, unsigned reg) -+{ -+ unsigned long flags; -+ u32 address; -+ u32 ret; -+ -+ address = rt3883_pci_get_cfgaddr(bus, slot, func, reg); -+ -+ spin_lock_irqsave(&rt3883_pci_lock, flags); -+ rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); -+ ret = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); -+ spin_unlock_irqrestore(&rt3883_pci_lock, flags); -+ -+ return ret; -+} -+ -+static void rt3883_pci_write_u32(unsigned bus, unsigned slot, -+ unsigned func, unsigned reg, u32 val) -+{ -+ unsigned long flags; -+ u32 address; -+ -+ address = rt3883_pci_get_cfgaddr(bus, slot, func, reg); -+ -+ spin_lock_irqsave(&rt3883_pci_lock, flags); -+ rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); -+ rt3883_pci_wr(val, RT3883_PCI_REG_CONFIG_DATA); -+ spin_unlock_irqrestore(&rt3883_pci_lock, flags); -+} -+ -+static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc) -+{ -+ u32 pending; -+ -+ pending = rt3883_pci_rr(RT3883_PCI_REG_PCIINT_ADDR) & -+ rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); -+ -+ if (!pending) { -+ spurious_interrupt(); -+ return; -+ } -+ -+ if (pending & RT3833_PCI_PCIINT_PCI0) -+ generic_handle_irq(RT3883_PCI_IRQ_PCI0); -+ -+ if (pending & RT3833_PCI_PCIINT_PCI1) -+ generic_handle_irq(RT3883_PCI_IRQ_PCI1); -+ -+ if (pending & RT3833_PCI_PCIINT_PCIE) -+ generic_handle_irq(RT3883_PCI_IRQ_PCIE); -+} -+ -+static void rt3883_pci_irq_unmask(struct irq_data *d) -+{ -+ int irq = d->irq; -+ u32 mask; -+ u32 t; -+ -+ switch (irq) { -+ case RT3883_PCI_IRQ_PCI0: -+ mask = RT3833_PCI_PCIINT_PCI0; -+ break; -+ case RT3883_PCI_IRQ_PCI1: -+ mask = RT3833_PCI_PCIINT_PCI1; -+ break; -+ case RT3883_PCI_IRQ_PCIE: -+ mask = RT3833_PCI_PCIINT_PCIE; -+ break; -+ default: -+ BUG(); -+ } -+ -+ t = rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); -+ rt3883_pci_wr(t | mask, RT3883_PCI_REG_PCIMSK_ADDR); -+ /* flush write */ -+ rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); -+} -+ -+static void rt3883_pci_irq_mask(struct irq_data *d) -+{ -+ int irq = d->irq; -+ u32 mask; -+ u32 t; -+ -+ switch (irq) { -+ case RT3883_PCI_IRQ_PCI0: -+ mask = RT3833_PCI_PCIINT_PCI0; -+ break; -+ case RT3883_PCI_IRQ_PCI1: -+ mask = RT3833_PCI_PCIINT_PCI1; -+ break; -+ case RT3883_PCI_IRQ_PCIE: -+ mask = RT3833_PCI_PCIINT_PCIE; -+ break; -+ default: -+ BUG(); -+ } -+ -+ t = rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); -+ rt3883_pci_wr(t & ~mask, RT3883_PCI_REG_PCIMSK_ADDR); -+ /* flush write */ -+ rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); -+} -+ -+static struct irq_chip rt3883_pci_irq_chip = { -+ .name = "RT3883 PCI", -+ .irq_mask = rt3883_pci_irq_mask, -+ .irq_unmask = rt3883_pci_irq_unmask, -+ .irq_mask_ack = rt3883_pci_irq_mask, -+}; -+ -+static void __init rt3883_pci_irq_init(void) -+{ -+ int i; -+ -+ /* disable all interrupts */ -+ rt3883_pci_wr(0, RT3883_PCI_REG_PCIMSK_ADDR); -+ -+ for (i = RT3883_PCI_IRQ_BASE; -+ i < RT3883_PCI_IRQ_BASE + RT3883_PCI_IRQ_COUNT; i++) { -+ irq_set_chip_and_handler(i, &rt3883_pci_irq_chip, -+ handle_level_irq); -+ } -+ -+ irq_set_chained_handler(RT3883_CPU_IRQ_PCI, rt3883_pci_irq_handler); -+} -+ -+static int rt3883_pci_config_read(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 *val) -+{ -+ unsigned long flags; -+ u32 address; -+ u32 data; -+ -+ address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), -+ PCI_FUNC(devfn), where); -+ -+ spin_lock_irqsave(&rt3883_pci_lock, flags); -+ rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); -+ data = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); -+ spin_unlock_irqrestore(&rt3883_pci_lock, flags); -+ -+ switch (size) { -+ case 1: -+ *val = (data >> ((where & 3) << 3)) & 0xff; -+ break; -+ case 2: -+ *val = (data >> ((where & 3) << 3)) & 0xffff; -+ break; -+ case 4: -+ *val = data; -+ break; -+ } -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 val) -+{ -+ unsigned long flags; -+ u32 address; -+ u32 data; -+ -+ address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), -+ PCI_FUNC(devfn), where); -+ -+ spin_lock_irqsave(&rt3883_pci_lock, flags); -+ rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); -+ data = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); -+ -+ switch (size) { -+ case 1: -+ data = (data & ~(0xff << ((where & 3) << 3))) | -+ (val << ((where & 3) << 3)); -+ break; -+ case 2: -+ data = (data & ~(0xffff << ((where & 3) << 3))) | -+ (val << ((where & 3) << 3)); -+ break; -+ case 4: -+ data = val; -+ break; -+ } -+ -+ rt3883_pci_wr(data, RT3883_PCI_REG_CONFIG_DATA); -+ spin_unlock_irqrestore(&rt3883_pci_lock, flags); -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static struct pci_ops rt3883_pci_ops = { -+ .read = rt3883_pci_config_read, -+ .write = rt3883_pci_config_write, -+}; -+ -+static struct resource rt3883_pci_mem_resource = { -+ .name = "PCI MEM space", -+ .start = RT3883_PCI_MEM_BASE, -+ .end = RT3883_PCI_MEM_BASE + RT3883_PCI_MEM_SIZE - 1, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource rt3883_pci_io_resource = { -+ .name = "PCI IO space", -+ .start = RT3883_PCI_IO_BASE, -+ .end = RT3883_PCI_IO_BASE + RT3883_PCI_IO_SIZE - 1, -+ .flags = IORESOURCE_IO, -+}; -+ -+static struct pci_controller rt3883_pci_controller = { -+ .pci_ops = &rt3883_pci_ops, -+ .mem_resource = &rt3883_pci_mem_resource, -+ .io_resource = &rt3883_pci_io_resource, -+}; -+ -+static void rt3883_pci_preinit(unsigned mode) -+{ -+ u32 syscfg1; -+ u32 rstctrl; -+ u32 clkcfg1; -+ -+ if (mode & RT3883_PCI_MODE_PCIE) { -+ u32 val; -+ -+ val = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); -+ val &= ~(0x30); -+ val |= (2 << 4); -+ rt3883_sysc_wr(val, RT3883_SYSC_REG_SYSCFG1); -+ -+ val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN0); -+ val &= ~BIT(31); -+ rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN0); -+ -+ val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN1); -+ val &= 0x80ffffff; -+ rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN1); -+ -+ val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN1); -+ val |= 0xa << 24; -+ rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN1); -+ -+ val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN0); -+ val |= BIT(31); -+ rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN0); -+ -+ msleep(50); -+ } -+ -+ syscfg1 = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); -+ syscfg1 &= ~(RT3883_SYSCFG1_PCIE_RC_MODE | -+ RT3883_SYSCFG1_PCI_HOST_MODE); -+ -+ rstctrl = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); -+ rstctrl |= (RT3883_RSTCTRL_PCI | RT3883_RSTCTRL_PCIE); -+ -+ clkcfg1 = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1); -+ clkcfg1 &= ~(RT3883_CLKCFG1_PCI_CLK_EN | -+ RT3883_CLKCFG1_PCIE_CLK_EN); -+ -+ if (mode & RT3883_PCI_MODE_PCI) { -+ syscfg1 |= RT3883_SYSCFG1_PCI_HOST_MODE; -+ clkcfg1 |= RT3883_CLKCFG1_PCI_CLK_EN; -+ rstctrl &= ~RT3883_RSTCTRL_PCI; -+ } -+ if (mode & RT3883_PCI_MODE_PCIE) { -+ syscfg1 |= RT3883_SYSCFG1_PCI_HOST_MODE | -+ RT3883_SYSCFG1_PCIE_RC_MODE; -+ clkcfg1 |= RT3883_CLKCFG1_PCIE_CLK_EN; -+ rstctrl &= ~RT3883_RSTCTRL_PCIE; -+ } -+ -+ rt3883_sysc_wr(syscfg1, RT3883_SYSC_REG_SYSCFG1); -+ rt3883_sysc_wr(rstctrl, RT3883_SYSC_REG_RSTCTRL); -+ rt3883_sysc_wr(clkcfg1, RT3883_SYSC_REG_CLKCFG1); -+ -+ msleep(500); -+} -+ -+static int rt3883_pcie_ready(void) -+{ -+ u32 status; -+ -+ msleep(500); -+ -+ status = rt3883_pci_rr(RT3883_PCI_REG_STATUS(1)); -+ if (status & BIT(0)) -+ return 0; -+ -+ /* TODO: reset PCIe and turn off PCIe clock */ -+ -+ return -ENODEV; -+} -+ -+void __init rt3883_pci_init(unsigned mode) -+{ -+ u32 val; -+ int err; -+ -+ rt3883_pci_preinit(mode); -+ -+ rt3883_pci_base = ioremap(RT3883_PCI_BASE, PAGE_SIZE); -+ if (rt3883_pci_base == NULL) { -+ pr_err("failed to ioremap PCI registers\n"); -+ return; -+ } -+ -+ rt3883_pci_wr(0, RT3883_PCI_REG_PCICFG_ADDR); -+ if (mode & RT3883_PCI_MODE_PCI) -+ rt3883_pci_wr(BIT(16), RT3883_PCI_REG_PCICFG_ADDR); -+ -+ msleep(500); -+ -+ if (mode & RT3883_PCI_MODE_PCIE) { -+ err = rt3883_pcie_ready(); -+ if (err) -+ return; -+ } -+ -+ if (mode & RT3883_PCI_MODE_PCI) -+ rt3883_pci_wr(0x79, RT3883_PCI_REG_ARBCTL); -+ -+ rt3883_pci_wr(RT3883_PCI_MEM_BASE, RT3883_PCI_REG_MEMBASE); -+ rt3883_pci_wr(RT3883_PCI_IO_BASE, RT3883_PCI_REG_IOBASE); -+ -+ /* PCI */ -+ rt3883_pci_wr(0x03ff0000, RT3883_PCI_REG_BAR0SETUP_ADDR(0)); -+ rt3883_pci_wr(RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0_ADDR(0)); -+ rt3883_pci_wr(0x08021814, RT3883_PCI_REG_ID(0)); -+ rt3883_pci_wr(0x00800001, RT3883_PCI_REG_CLASS(0)); -+ rt3883_pci_wr(0x28801814, RT3883_PCI_REG_SUBID(0)); -+ -+ /* PCIe */ -+ rt3883_pci_wr(0x01ff0000, RT3883_PCI_REG_BAR0SETUP_ADDR(1)); -+ rt3883_pci_wr(RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0_ADDR(1)); -+ rt3883_pci_wr(0x08021814, RT3883_PCI_REG_ID(1)); -+ rt3883_pci_wr(0x06040001, RT3883_PCI_REG_CLASS(1)); -+ rt3883_pci_wr(0x28801814, RT3883_PCI_REG_SUBID(1)); -+ -+ rt3883_pci_irq_init(); -+ -+ /* PCIe */ -+ val = rt3883_pci_read_u32(0, 0x01, 0, PCI_COMMAND); -+ val |= 0x7; -+ rt3883_pci_write_u32(0, 0x01, 0, PCI_COMMAND, val); -+ -+ /* PCI */ -+ val = rt3883_pci_read_u32(0, 0x00, 0, PCI_COMMAND); -+ val |= 0x7; -+ rt3883_pci_write_u32(0, 0x00, 0, PCI_COMMAND, val); -+ -+ ioport_resource.start = rt3883_pci_io_resource.start; -+ ioport_resource.end = rt3883_pci_io_resource.end; -+ -+ register_pci_controller(&rt3883_pci_controller); -+} -+ -+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ int irq = -1; -+ -+ switch (dev->bus->number) { -+ case 0: -+ switch (PCI_SLOT(dev->devfn)) { -+ case 0x00: -+ rt3883_pci_wr(0x03ff0001, -+ RT3883_PCI_REG_BAR0SETUP_ADDR(0)); -+ rt3883_pci_wr(0x03ff0001, -+ RT3883_PCI_REG_BAR0SETUP_ADDR(1)); -+ -+ rt3883_pci_write_u32(0, 0x00, 0, PCI_BASE_ADDRESS_0, -+ RT3883_MEMORY_BASE); -+ rt3883_pci_read_u32(0, 0x00, 0, PCI_BASE_ADDRESS_0); -+ -+ irq = RT3883_CPU_IRQ_PCI; -+ break; -+ case 0x01: -+ rt3883_pci_write_u32(0, 0x01, 0, PCI_IO_BASE, -+ 0x00000101); -+ break; -+ case 0x11: -+ irq = RT3883_PCI_IRQ_PCI0; -+ break; -+ case 0x12: -+ irq = RT3883_PCI_IRQ_PCI1; -+ break; -+ } -+ break; -+ -+ case 1: -+ irq = RT3883_PCI_IRQ_PCIE; -+ break; -+ -+ default: -+ dev_err(&dev->dev, "no IRQ specified\n"); -+ return irq; -+ } -+ -+ return irq; -+} -+ -+void __init rt3883_pci_set_plat_dev_init(int (*f)(struct pci_dev *dev)) -+{ -+ rt3883_pci_plat_dev_init = f; -+} -+ -+int pcibios_plat_dev_init(struct pci_dev *dev) -+{ -+ if (rt3883_pci_plat_dev_init) -+ return rt3883_pci_plat_dev_init(dev); -+ -+ return 0; -+} ---- a/arch/mips/ralink/Kconfig -+++ b/arch/mips/ralink/Kconfig -@@ -20,6 +20,7 @@ choice - bool "RT3883" - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_EHCI -+ select HW_HAS_PCI - - config SOC_MT7620 - bool "MT7620" diff --git a/target/linux/ramips/patches-3.8/0120-DT-MIPS-ralink-add-MT7620A-dts-files.patch b/target/linux/ramips/patches-3.8/0120-DT-MIPS-ralink-add-MT7620A-dts-files.patch new file mode 100644 index 0000000000..82a3086c17 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0120-DT-MIPS-ralink-add-MT7620A-dts-files.patch @@ -0,0 +1,119 @@ +From 07741f61fc94fad3c3d21fa1a2ad6f01455cc1dd Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Fri, 12 Apr 2013 06:27:41 +0000 +Subject: [PATCH 120/137] DT: MIPS: ralink: add MT7620A dts files + +Add a dtsi file for MT7620A SoC and a sample dts file. + +Signed-off-by: John Crispin +Acked-by: Grant Likely +Patchwork: http://patchwork.linux-mips.org/patch/5190/ +--- + arch/mips/ralink/Kconfig | 4 +++ + arch/mips/ralink/dts/Makefile | 1 + + arch/mips/ralink/dts/mt7620a.dtsi | 58 +++++++++++++++++++++++++++++++++ + arch/mips/ralink/dts/mt7620a_eval.dts | 16 +++++++++ + 4 files changed, 79 insertions(+) + create mode 100644 arch/mips/ralink/dts/mt7620a.dtsi + create mode 100644 arch/mips/ralink/dts/mt7620a_eval.dts + +--- a/arch/mips/ralink/Kconfig ++++ b/arch/mips/ralink/Kconfig +@@ -46,6 +46,10 @@ choice + bool "RT3883 eval kit" + depends on SOC_RT3883 + ++ config DTB_MT7620A_EVAL ++ bool "MT7620A eval kit" ++ depends on SOC_MT7620 ++ + endchoice + + endif +--- a/arch/mips/ralink/dts/Makefile ++++ b/arch/mips/ralink/dts/Makefile +@@ -1,3 +1,4 @@ + obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o + obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o + obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o ++obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o +--- /dev/null ++++ b/arch/mips/ralink/dts/mt7620a.dtsi +@@ -0,0 +1,58 @@ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "ralink,mtk7620a-soc"; ++ ++ cpus { ++ cpu@0 { ++ compatible = "mips,mips24KEc"; ++ }; ++ }; ++ ++ cpuintc: cpuintc@0 { ++ #address-cells = <0>; ++ #interrupt-cells = <1>; ++ interrupt-controller; ++ compatible = "mti,cpu-interrupt-controller"; ++ }; ++ ++ palmbus@10000000 { ++ compatible = "palmbus"; ++ reg = <0x10000000 0x200000>; ++ ranges = <0x0 0x10000000 0x1FFFFF>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ sysc@0 { ++ compatible = "ralink,mt7620a-sysc"; ++ reg = <0x0 0x100>; ++ }; ++ ++ intc: intc@200 { ++ compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc"; ++ reg = <0x200 0x100>; ++ ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ ++ interrupt-parent = <&cpuintc>; ++ interrupts = <2>; ++ }; ++ ++ memc@300 { ++ compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc"; ++ reg = <0x300 0x100>; ++ }; ++ ++ uartlite@c00 { ++ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a"; ++ reg = <0xc00 0x100>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <12>; ++ ++ reg-shift = <2>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/mips/ralink/dts/mt7620a_eval.dts +@@ -0,0 +1,16 @@ ++/dts-v1/; ++ ++/include/ "mt7620a.dtsi" ++ ++/ { ++ compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc"; ++ model = "Ralink MT7620A evaluation board"; ++ ++ memory@0 { ++ reg = <0x0 0x2000000>; ++ }; ++ ++ chosen { ++ bootargs = "console=ttyS0,57600"; ++ }; ++}; diff --git a/target/linux/ramips/patches-3.8/0121-MIPS-add-detect_memory_region.patch b/target/linux/ramips/patches-3.8/0121-MIPS-add-detect_memory_region.patch new file mode 100644 index 0000000000..8736e246b6 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0121-MIPS-add-detect_memory_region.patch @@ -0,0 +1,61 @@ +From 9041c96ab5bd29d85ca95cffa44c755f68ae6bb1 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sat, 13 Apr 2013 13:15:47 +0200 +Subject: [PATCH 121/137] MIPS: add detect_memory_region() + +Add a generic way of detecting the available RAM. This function is based on the +implementation already used by ath79. + +Signed-off-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/5178/ +--- + arch/mips/include/asm/bootinfo.h | 1 + + arch/mips/kernel/setup.c | 20 ++++++++++++++++++++ + 2 files changed, 21 insertions(+) + +--- a/arch/mips/include/asm/bootinfo.h ++++ b/arch/mips/include/asm/bootinfo.h +@@ -104,6 +104,7 @@ struct boot_mem_map { + extern struct boot_mem_map boot_mem_map; + + extern void add_memory_region(phys_t start, phys_t size, long type); ++extern void detect_memory_region(phys_t start, phys_t sz_min, phys_t sz_max); + + extern void prom_init(void); + extern void prom_free_prom_memory(void); +--- a/arch/mips/kernel/setup.c ++++ b/arch/mips/kernel/setup.c +@@ -23,6 +23,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -122,6 +123,25 @@ void __init add_memory_region(phys_t sta + boot_mem_map.nr_map++; + } + ++void __init detect_memory_region(phys_t start, phys_t sz_min, phys_t sz_max) ++{ ++ phys_t size; ++ ++ for (size = sz_min; size < sz_max; size <<= 1) { ++ if (!memcmp(detect_memory_region, ++ detect_memory_region + size, 1024)) ++ break; ++ } ++ ++ pr_debug("Memory: %lluMB of RAM detected at 0x%llx (min: %lluMB, max: %lluMB)\n", ++ ((unsigned long long) size) / SZ_1M, ++ (unsigned long long) start, ++ ((unsigned long long) sz_min) / SZ_1M, ++ ((unsigned long long) sz_max) / SZ_1M); ++ ++ add_memory_region(start, size, BOOT_MEM_RAM); ++} ++ + static void __init print_memory_map(void) + { + int i; diff --git a/target/linux/ramips/patches-3.8/0122-MIPS-ralink-add-memory-definition-to-struct-ralink_s.patch b/target/linux/ramips/patches-3.8/0122-MIPS-ralink-add-memory-definition-to-struct-ralink_s.patch new file mode 100644 index 0000000000..3454a5ba56 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0122-MIPS-ralink-add-memory-definition-to-struct-ralink_s.patch @@ -0,0 +1,29 @@ +From 5155790ed1f270379ea98325f01e1c72a36a37d0 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sat, 13 Apr 2013 15:10:14 +0200 +Subject: [PATCH 122/137] MIPS: ralink: add memory definition to struct + ralink_soc_info + +Depending on the actual SoC we have a different base address as well as minimum +and maximum size for RAM. Add these fields to the per SoC structure. + +Signed-off-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/5179/ +--- + arch/mips/ralink/common.h | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/mips/ralink/common.h ++++ b/arch/mips/ralink/common.h +@@ -33,6 +33,11 @@ extern struct ralink_pinmux rt_gpio_pinm + struct ralink_soc_info { + unsigned char sys_type[RAMIPS_SYS_TYPE_LEN]; + unsigned char *compatible; ++ ++ unsigned long mem_base; ++ unsigned long mem_size; ++ unsigned long mem_size_min; ++ unsigned long mem_size_max; + }; + extern struct ralink_soc_info soc_info; + diff --git a/target/linux/ramips/patches-3.8/0123-MIPS-ralink-add-memory-definition-for-RT305x.patch b/target/linux/ramips/patches-3.8/0123-MIPS-ralink-add-memory-definition-for-RT305x.patch new file mode 100644 index 0000000000..877e442b62 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0123-MIPS-ralink-add-memory-definition-for-RT305x.patch @@ -0,0 +1,89 @@ +From 016f1f659cf70cc78e72e12a2130d8f3e1a6e0d3 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sat, 13 Apr 2013 15:13:40 +0200 +Subject: [PATCH 123/137] MIPS: ralink: add memory definition for RT305x + +Populate struct soc_info with the data that describes our RAM window. + +As memory detection fails on RT5350 we read the amount of available memory +from the system controller. + +Signed-off-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/5180/ +--- + arch/mips/include/asm/mach-ralink/rt305x.h | 6 ++++ + arch/mips/ralink/rt305x.c | 45 ++++++++++++++++++++++++++++ + 2 files changed, 51 insertions(+) + +--- a/arch/mips/include/asm/mach-ralink/rt305x.h ++++ b/arch/mips/include/asm/mach-ralink/rt305x.h +@@ -157,4 +157,10 @@ static inline int soc_is_rt5350(void) + #define RT3352_RSTCTRL_UDEV BIT(25) + #define RT3352_SYSCFG1_USB0_HOST_MODE BIT(10) + ++#define RT305X_SDRAM_BASE 0x00000000 ++#define RT305X_MEM_SIZE_MIN 2 ++#define RT305X_MEM_SIZE_MAX 64 ++#define RT3352_MEM_SIZE_MIN 2 ++#define RT3352_MEM_SIZE_MAX 256 ++ + #endif +--- a/arch/mips/ralink/rt305x.c ++++ b/arch/mips/ralink/rt305x.c +@@ -122,6 +122,40 @@ struct ralink_pinmux rt_gpio_pinmux = { + .wdt_reset = rt305x_wdt_reset, + }; + ++static unsigned long rt5350_get_mem_size(void) ++{ ++ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); ++ unsigned long ret; ++ u32 t; ++ ++ t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG); ++ t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) & ++ RT5350_SYSCFG0_DRAM_SIZE_MASK; ++ ++ switch (t) { ++ case RT5350_SYSCFG0_DRAM_SIZE_2M: ++ ret = 2; ++ break; ++ case RT5350_SYSCFG0_DRAM_SIZE_8M: ++ ret = 8; ++ break; ++ case RT5350_SYSCFG0_DRAM_SIZE_16M: ++ ret = 16; ++ break; ++ case RT5350_SYSCFG0_DRAM_SIZE_32M: ++ ret = 32; ++ break; ++ case RT5350_SYSCFG0_DRAM_SIZE_64M: ++ ret = 64; ++ break; ++ default: ++ panic("rt5350: invalid DRAM size: %u", t); ++ break; ++ } ++ ++ return ret; ++} ++ + void __init ralink_clk_init(void) + { + unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate; +@@ -252,4 +286,15 @@ void prom_soc_init(struct ralink_soc_inf + name, + (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, + (id & CHIP_ID_REV_MASK)); ++ ++ soc_info->mem_base = RT305X_SDRAM_BASE; ++ if (soc_is_rt5350()) { ++ soc_info->mem_size = rt5350_get_mem_size(); ++ } else if (soc_is_rt305x() || soc_is_rt3350()) { ++ soc_info->mem_size_min = RT305X_MEM_SIZE_MIN; ++ soc_info->mem_size_max = RT305X_MEM_SIZE_MAX; ++ } else if (soc_is_rt3352()) { ++ soc_info->mem_size_min = RT3352_MEM_SIZE_MIN; ++ soc_info->mem_size_max = RT3352_MEM_SIZE_MAX; ++ } + } diff --git a/target/linux/ramips/patches-3.8/0123-MIPS-ralink-fix-uartmux-group-handling.patch b/target/linux/ramips/patches-3.8/0123-MIPS-ralink-fix-uartmux-group-handling.patch deleted file mode 100644 index dee504fe50..0000000000 --- a/target/linux/ramips/patches-3.8/0123-MIPS-ralink-fix-uartmux-group-handling.patch +++ /dev/null @@ -1,40 +0,0 @@ -From 34a9a634432a95d8ae9af86d41fdaf32fb039c2c Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Wed, 27 Mar 2013 21:10:14 +0100 -Subject: [PATCH 1/5] MIPS: ralink: fix uartmux group handling - - * don't try get 'ralink,uartmux' porperty if the pinmux.uart is - not initialized, - * don't touch 'mode' value if mux mask is zero - -Signed-off-by: Gabor Juhos ---- - arch/mips/ralink/pinmux.c | 12 ++++++++---- - 1 file changed, 8 insertions(+), 4 deletions(-) - ---- a/arch/mips/ralink/pinmux.c -+++ b/arch/mips/ralink/pinmux.c -@@ -56,15 +56,19 @@ void ralink_pinmux(void) - } - } - -- of_property_read_string(np, "ralink,uartmux", &uart); -+ uart = NULL; -+ if (rt_pinmux.uart) -+ of_property_read_string(np, "ralink,uartmux", &uart); -+ - if (uart) { - int m = ralink_mux_mask(uart, rt_pinmux.uart); -- mode |= rt_pinmux.uart_mask << rt_pinmux.uart_shift; -+ - if (m) { -- mode &= ~(m << rt_pinmux.uart_shift); -+ mode &= ~(rt_pinmux.uart_mask << rt_pinmux.uart_shift); -+ mode |= m << rt_pinmux.uart_shift; - pr_debug("pinmux: registered uartmux \"%s\"\n", uart); - } else { -- pr_debug("pinmux: registered uartmux \"gpio\"\n"); -+ pr_debug("pinmux: unknown uartmux \"%s\"\n", uart); - } - } - diff --git a/target/linux/ramips/patches-3.8/0124-MIPS-ralink-add-memory-definition-for-RT2880.patch b/target/linux/ramips/patches-3.8/0124-MIPS-ralink-add-memory-definition-for-RT2880.patch new file mode 100644 index 0000000000..975fb48a4b --- /dev/null +++ b/target/linux/ramips/patches-3.8/0124-MIPS-ralink-add-memory-definition-for-RT2880.patch @@ -0,0 +1,36 @@ +From 0151f5f0dbf43b6b3718b0d1d403c87429ac0313 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sat, 13 Apr 2013 15:37:37 +0200 +Subject: [PATCH 124/137] MIPS: ralink: add memory definition for RT2880 + +Populate struct soc_info with the data that describes our RAM window. + +Signed-off-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/5181/ +--- + arch/mips/include/asm/mach-ralink/rt288x.h | 4 ++++ + arch/mips/ralink/rt288x.c | 4 ++++ + 2 files changed, 8 insertions(+) + +--- a/arch/mips/include/asm/mach-ralink/rt288x.h ++++ b/arch/mips/include/asm/mach-ralink/rt288x.h +@@ -46,4 +46,8 @@ + + #define CLKCFG_SRAM_CS_N_WDT BIT(9) + ++#define RT2880_SDRAM_BASE 0x08000000 ++#define RT2880_MEM_SIZE_MIN 2 ++#define RT2880_MEM_SIZE_MAX 128 ++ + #endif +--- a/arch/mips/ralink/rt288x.c ++++ b/arch/mips/ralink/rt288x.c +@@ -136,4 +136,8 @@ void prom_soc_init(struct ralink_soc_inf + name, + (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, + (id & CHIP_ID_REV_MASK)); ++ ++ soc_info->mem_base = RT2880_SDRAM_BASE; ++ soc_info->mem_size_min = RT2880_MEM_SIZE_MIN; ++ soc_info->mem_size_max = RT2880_MEM_SIZE_MAX; + } diff --git a/target/linux/ramips/patches-3.8/0124-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch b/target/linux/ramips/patches-3.8/0124-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch deleted file mode 100644 index 32747e1a19..0000000000 --- a/target/linux/ramips/patches-3.8/0124-MIPS-ralink-add-pci-group-to-struct-ralink_pinmux.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 8818e2d260e7f98fd5388f9ba56f54b788e175f0 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Wed, 27 Mar 2013 20:42:18 +0100 -Subject: [PATCH 2/5] MIPS: ralink: add pci group to struct ralink_pinmux - -This will be used for RT3662/RT3883. - -Signed-off-by: Gabor Juhos ---- - arch/mips/ralink/common.h | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/arch/mips/ralink/common.h -+++ b/arch/mips/ralink/common.h -@@ -24,6 +24,9 @@ struct ralink_pinmux { - int uart_shift; - u32 uart_mask; - void (*wdt_reset)(void); -+ struct ralink_pinmux_grp *pci; -+ int pci_shift; -+ u32 pci_mask; - }; - extern struct ralink_pinmux rt_pinmux; - diff --git a/target/linux/ramips/patches-3.8/0125-MIPS-ralink-add-memory-definition-for-RT3883.patch b/target/linux/ramips/patches-3.8/0125-MIPS-ralink-add-memory-definition-for-RT3883.patch new file mode 100644 index 0000000000..f1fa46b331 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0125-MIPS-ralink-add-memory-definition-for-RT3883.patch @@ -0,0 +1,36 @@ +From de85c6c3e2d5ed9c721a282d91af504a845e1fad Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sat, 13 Apr 2013 20:23:19 +0200 +Subject: [PATCH 125/137] MIPS: ralink: add memory definition for RT3883 + +Populate struct soc_info with the data that describes our RAM window. + +Signed-off-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/5182/ +--- + arch/mips/include/asm/mach-ralink/rt3883.h | 4 ++++ + arch/mips/ralink/rt3883.c | 4 ++++ + 2 files changed, 8 insertions(+) + +--- a/arch/mips/include/asm/mach-ralink/rt3883.h ++++ b/arch/mips/include/asm/mach-ralink/rt3883.h +@@ -244,4 +244,8 @@ + #define RT3883_FLASH_CFG_WIDTH_16BIT 0x1 + #define RT3883_FLASH_CFG_WIDTH_32BIT 0x2 + ++#define RT3883_SDRAM_BASE 0x00000000 ++#define RT3883_MEM_SIZE_MIN 2 ++#define RT3883_MEM_SIZE_MAX 256 ++ + #endif /* _RT3883_REGS_H_ */ +--- a/arch/mips/ralink/rt3883.c ++++ b/arch/mips/ralink/rt3883.c +@@ -239,4 +239,8 @@ void prom_soc_init(struct ralink_soc_inf + name, + (id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK, + (id & RT3883_REVID_ECO_ID_MASK)); ++ ++ soc_info->mem_base = RT3883_SDRAM_BASE; ++ soc_info->mem_size_min = RT3883_MEM_SIZE_MIN; ++ soc_info->mem_size_max = RT3883_MEM_SIZE_MAX; + } diff --git a/target/linux/ramips/patches-3.8/0125-MIPS-ralink-process-PCI-pinmux-group.patch b/target/linux/ramips/patches-3.8/0125-MIPS-ralink-process-PCI-pinmux-group.patch deleted file mode 100644 index d5c037e2e3..0000000000 --- a/target/linux/ramips/patches-3.8/0125-MIPS-ralink-process-PCI-pinmux-group.patch +++ /dev/null @@ -1,42 +0,0 @@ -From fe26f3e7d1329fc2a5ac14808dbecb7d324d0a41 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Wed, 27 Mar 2013 20:56:22 +0100 -Subject: [PATCH 3/5] MIPS: ralink: process PCI pinmux group - -Signed-off-by: Gabor Juhos ---- - arch/mips/ralink/pinmux.c | 14 +++++++++++++- - 1 file changed, 13 insertions(+), 1 deletion(-) - ---- a/arch/mips/ralink/pinmux.c -+++ b/arch/mips/ralink/pinmux.c -@@ -29,7 +29,7 @@ void ralink_pinmux(void) - const __be32 *wdt; - struct device_node *np; - struct property *prop; -- const char *uart, *pin; -+ const char *uart, *pci, *pin; - u32 mode = 0; - - np = of_find_compatible_node(NULL, NULL, "ralink,rt3050-sysc"); -@@ -76,5 +76,20 @@ void ralink_pinmux(void) - if (wdt && *wdt && rt_pinmux.wdt_reset) - rt_pinmux.wdt_reset(); - -+ pci = NULL; -+ if (rt_pinmux.pci) -+ of_property_read_string(np, "ralink,pcimux", &pci); -+ -+ if (pci) { -+ int m = ralink_mux_mask(pci, rt_pinmux.pci); -+ mode &= ~(rt_pinmux.pci_mask << rt_pinmux.pci_shift); -+ if (m) { -+ mode |= (m << rt_pinmux.pci_shift); -+ pr_debug("pinmux: registered pcimux \"%s\"\n", pci); -+ } else { -+ pr_debug("pinmux: registered pcimux \"gpio\"\n"); -+ } -+ } -+ - rt_sysc_w32(mode, SYSC_REG_GPIO_MODE); - } diff --git a/target/linux/ramips/patches-3.8/0126-MIPS-ralink-add-PCI-pinmux-group-for-RT3883.patch b/target/linux/ramips/patches-3.8/0126-MIPS-ralink-add-PCI-pinmux-group-for-RT3883.patch deleted file mode 100644 index 6f0b1c1aa4..0000000000 --- a/target/linux/ramips/patches-3.8/0126-MIPS-ralink-add-PCI-pinmux-group-for-RT3883.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 2c868d77c161ce7dea8facf203c155924d776c33 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Wed, 27 Mar 2013 20:50:40 +0100 -Subject: [PATCH 4/5] MIPS: ralink: add PCI pinmux group for RT3883 - -Signed-off-by: Gabor Juhos ---- - arch/mips/ralink/rt3883.c | 32 ++++++++++++++++++++++++++++++++ - 1 file changed, 32 insertions(+) - ---- a/arch/mips/ralink/rt3883.c -+++ b/arch/mips/ralink/rt3883.c -@@ -113,6 +113,35 @@ struct ralink_pinmux_grp uart_mux[] = { - }, {0} - }; - -+struct ralink_pinmux_grp pci_mux[] = { -+ { -+ .name = "pci-dev", -+ .mask = 0, -+ .gpio_first = RT3883_GPIO_PCI_AD0, -+ .gpio_last = RT3883_GPIO_PCI_AD31, -+ }, { -+ .name = "pci-host2", -+ .mask = 1, -+ .gpio_first = RT3883_GPIO_PCI_AD0, -+ .gpio_last = RT3883_GPIO_PCI_AD31, -+ }, { -+ .name = "pci-host1", -+ .mask = 2, -+ .gpio_first = RT3883_GPIO_PCI_AD0, -+ .gpio_last = RT3883_GPIO_PCI_AD31, -+ }, { -+ .name = "pci-fnc", -+ .mask = 3, -+ .gpio_first = RT3883_GPIO_PCI_AD0, -+ .gpio_last = RT3883_GPIO_PCI_AD31, -+ }, { -+ .name = "pci-gpio", -+ .mask = 7, -+ .gpio_first = RT3883_GPIO_PCI_AD0, -+ .gpio_last = RT3883_GPIO_PCI_AD31, -+ }, {0} -+}; -+ - static void rt3883_wdt_reset(void) - { - u32 t; -@@ -129,6 +158,9 @@ struct ralink_pinmux rt_pinmux = { - .uart_shift = RT3883_GPIO_MODE_UART0_SHIFT, - .uart_mask = RT3883_GPIO_MODE_GPIO, - .wdt_reset = rt3883_wdt_reset, -+ .pci = pci_mux, -+ .pci_shift = RT3883_GPIO_MODE_PCI_SHIFT, -+ .pci_mask = RT3883_GPIO_MODE_PCI_MASK, - }; - - void __init ralink_clk_init(void) diff --git a/target/linux/ramips/patches-3.8/0126-MIPS-ralink-add-memory-definition-for-MT7620.patch b/target/linux/ramips/patches-3.8/0126-MIPS-ralink-add-memory-definition-for-MT7620.patch new file mode 100644 index 0000000000..b36ab33071 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0126-MIPS-ralink-add-memory-definition-for-MT7620.patch @@ -0,0 +1,58 @@ +From c1d35c42d697e9c28c817921a79c5f814529a4c6 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sun, 14 Apr 2013 09:55:29 +0200 +Subject: [PATCH 126/137] MIPS: ralink: add memory definition for MT7620 + +Populate struct soc_info with the data that describes our RAM window. + +Signed-off-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/5183/ +--- + arch/mips/include/asm/mach-ralink/mt7620.h | 8 ++++++++ + arch/mips/ralink/mt7620.c | 20 ++++++++++++++++++++ + 2 files changed, 28 insertions(+) + +--- a/arch/mips/include/asm/mach-ralink/mt7620.h ++++ b/arch/mips/include/asm/mach-ralink/mt7620.h +@@ -50,6 +50,14 @@ + #define SYSCFG0_DRAM_TYPE_DDR1 1 + #define SYSCFG0_DRAM_TYPE_DDR2 2 + ++#define MT7620_DRAM_BASE 0x0 ++#define MT7620_SDRAM_SIZE_MIN 2 ++#define MT7620_SDRAM_SIZE_MAX 64 ++#define MT7620_DDR1_SIZE_MIN 32 ++#define MT7620_DDR1_SIZE_MAX 128 ++#define MT7620_DDR2_SIZE_MIN 32 ++#define MT7620_DDR2_SIZE_MAX 256 ++ + #define MT7620_GPIO_MODE_I2C BIT(0) + #define MT7620_GPIO_MODE_UART0_SHIFT 2 + #define MT7620_GPIO_MODE_UART0_MASK 0x7 +--- a/arch/mips/ralink/mt7620.c ++++ b/arch/mips/ralink/mt7620.c +@@ -211,4 +211,24 @@ void prom_soc_init(struct ralink_soc_inf + + cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0); + dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK; ++ ++ switch (dram_type) { ++ case SYSCFG0_DRAM_TYPE_SDRAM: ++ soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN; ++ soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX; ++ break; ++ ++ case SYSCFG0_DRAM_TYPE_DDR1: ++ soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN; ++ soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX; ++ break; ++ ++ case SYSCFG0_DRAM_TYPE_DDR2: ++ soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; ++ soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; ++ break; ++ default: ++ BUG(); ++ } ++ soc_info->mem_base = MT7620_DRAM_BASE; + } diff --git a/target/linux/ramips/patches-3.8/0127-MIPS-ralink-add-GPIO-mode-to-RT3883-UART-pinmux-grou.patch b/target/linux/ramips/patches-3.8/0127-MIPS-ralink-add-GPIO-mode-to-RT3883-UART-pinmux-grou.patch deleted file mode 100644 index 7b2f48b390..0000000000 --- a/target/linux/ramips/patches-3.8/0127-MIPS-ralink-add-GPIO-mode-to-RT3883-UART-pinmux-grou.patch +++ /dev/null @@ -1,24 +0,0 @@ -From 79a01992e15216544dcfdc0be9f2f7695952d047 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Wed, 27 Mar 2013 20:59:26 +0100 -Subject: [PATCH 5/5] MIPS: ralink: add GPIO mode to RT3883 UART pinmux group - -Signed-off-by: Gabor Juhos ---- - arch/mips/ralink/rt3883.c | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/mips/ralink/rt3883.c -+++ b/arch/mips/ralink/rt3883.c -@@ -110,6 +110,11 @@ struct ralink_pinmux_grp uart_mux[] = { - .mask = RT3883_GPIO_MODE_GPIO_I2S, - .gpio_first = RT3883_GPIO_7, - .gpio_last = RT3883_GPIO_14, -+ }, { -+ .name = "gpio", -+ .mask = RT3883_GPIO_MODE_GPIO, -+ .gpio_first = RT3883_GPIO_7, -+ .gpio_last = RT3883_GPIO_14, - }, {0} - }; - diff --git a/target/linux/ramips/patches-3.8/0127-MIPS-ralink-make-use-of-the-new-memory-detection-cod.patch b/target/linux/ramips/patches-3.8/0127-MIPS-ralink-make-use-of-the-new-memory-detection-cod.patch new file mode 100644 index 0000000000..59bdaddbe5 --- /dev/null +++ b/target/linux/ramips/patches-3.8/0127-MIPS-ralink-make-use-of-the-new-memory-detection-cod.patch @@ -0,0 +1,40 @@ +From 1618a00f709817cbcdebf038d0b5e251c8d67237 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sat, 13 Apr 2013 15:15:51 +0200 +Subject: [PATCH 127/137] MIPS: ralink: make use of the new memory detection + code + +Call detect_memory_region() from plat_mem_setup() unless the size was already +read from the system controller. + +Signed-off-by: John Crispin +Patchwork: http://patchwork.linux-mips.org/patch/5184/ +--- + arch/mips/ralink/of.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/arch/mips/ralink/of.c ++++ b/arch/mips/ralink/of.c +@@ -11,6 +11,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -85,6 +86,14 @@ void __init plat_mem_setup(void) + * parsed resulting in our memory appearing + */ + __dt_setup_arch(&__dtb_start); ++ ++ if (soc_info.mem_size) ++ add_memory_region(soc_info.mem_base, soc_info.mem_size, ++ BOOT_MEM_RAM); ++ else ++ detect_memory_region(soc_info.mem_base, ++ soc_info.mem_size_min * SZ_1M, ++ soc_info.mem_size_max * SZ_1M); + } + + static int __init plat_of_setup(void) diff --git a/target/linux/ramips/patches-3.8/0128-MIPS-ralink-add-cpu-feature-overrides.h-for-RT288x-S.patch b/target/linux/ramips/patches-3.8/0128-MIPS-ralink-add-cpu-feature-overrides.h-for-RT288x-S.patch deleted file mode 100644 index f9ed59bacd..0000000000 --- a/target/linux/ramips/patches-3.8/0128-MIPS-ralink-add-cpu-feature-overrides.h-for-RT288x-S.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 9830273b0c7f2e58a9226cc38bb0c4363e1fd8a2 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Sun, 7 Apr 2013 17:00:40 +0200 -Subject: [PATCH 1/3] MIPS: ralink: add cpu-feature-overrides.h for RT288x - SoCs - -Signed-off-by: Gabor Juhos ---- - .../asm/mach-ralink/rt288x/cpu-feature-overrides.h | 56 ++++++++++++++++++++ - arch/mips/ralink/Platform | 1 + - 2 files changed, 57 insertions(+) - create mode 100644 arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h - ---- /dev/null -+++ b/arch/mips/include/asm/mach-ralink/rt288x/cpu-feature-overrides.h -@@ -0,0 +1,56 @@ -+/* -+ * Ralink RT288x specific CPU feature overrides -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This file was derived from: include/asm-mips/cpu-features.h -+ * Copyright (C) 2003, 2004 Ralf Baechle -+ * Copyright (C) 2004 Maciej W. Rozycki -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ */ -+#ifndef _RT288X_CPU_FEATURE_OVERRIDES_H -+#define _RT288X_CPU_FEATURE_OVERRIDES_H -+ -+#define cpu_has_tlb 1 -+#define cpu_has_4kex 1 -+#define cpu_has_3k_cache 0 -+#define cpu_has_4k_cache 1 -+#define cpu_has_tx39_cache 0 -+#define cpu_has_sb1_cache 0 -+#define cpu_has_fpu 0 -+#define cpu_has_32fpr 0 -+#define cpu_has_counter 1 -+#define cpu_has_watch 1 -+#define cpu_has_divec 1 -+ -+#define cpu_has_prefetch 1 -+#define cpu_has_ejtag 1 -+#define cpu_has_llsc 1 -+ -+#define cpu_has_mips16 1 -+#define cpu_has_mdmx 0 -+#define cpu_has_mips3d 0 -+#define cpu_has_smartmips 0 -+ -+#define cpu_has_mips32r1 1 -+#define cpu_has_mips32r2 1 -+#define cpu_has_mips64r1 0 -+#define cpu_has_mips64r2 0 -+ -+#define cpu_has_dsp 0 -+#define cpu_has_mipsmt 0 -+ -+#define cpu_has_64bits 0 -+#define cpu_has_64bit_zero_reg 0 -+#define cpu_has_64bit_gp_regs 0 -+#define cpu_has_64bit_addresses 0 -+ -+#define cpu_dcache_line_size() 16 -+#define cpu_icache_line_size() 16 -+ -+#endif /* _RT288X_CPU_FEATURE_OVERRIDES_H */ ---- a/arch/mips/ralink/Platform -+++ b/arch/mips/ralink/Platform -@@ -8,6 +8,7 @@ cflags-$(CONFIG_RALINK) += -I$(srctree) - # Ralink RT288x - # - load-$(CONFIG_SOC_RT288X) += 0xffffffff88000000 -+cflags-$(CONFIG_SOC_RT288X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt288x - - # - # Ralink RT305x diff --git a/target/linux/ramips/patches-3.8/0104-MIPS-ralink-add-pinmux-driver.patch b/target/linux/ramips/patches-3.8/0128-MIPS-ralink-add-pinmux-driver.patch similarity index 62% rename from target/linux/ramips/patches-3.8/0104-MIPS-ralink-add-pinmux-driver.patch rename to target/linux/ramips/patches-3.8/0128-MIPS-ralink-add-pinmux-driver.patch index 374894793f..bf84dd9ebe 100644 --- a/target/linux/ramips/patches-3.8/0104-MIPS-ralink-add-pinmux-driver.patch +++ b/target/linux/ramips/patches-3.8/0128-MIPS-ralink-add-pinmux-driver.patch @@ -1,7 +1,7 @@ -From 806a489c720767f63bf5046c2ccd87ded9549c1c Mon Sep 17 00:00:00 2001 +From 5a2079532dfaf5762f658370ee7a0afb686f066e Mon Sep 17 00:00:00 2001 From: John Crispin -Date: Sat, 16 Mar 2013 00:50:57 +0100 -Subject: [PATCH 104/121] MIPS: ralink: add pinmux driver +Date: Mon, 22 Apr 2013 23:11:42 +0200 +Subject: [PATCH 128/137] MIPS: ralink: add pinmux driver Add code to setup the pinmux on ralonk SoC. The SoC has a single 32 bit register for this functionality with simple on/off bits. Building a full featured pinctrl @@ -10,11 +10,10 @@ driver would be overkill. Signed-off-by: John Crispin --- arch/mips/ralink/Makefile | 2 +- - arch/mips/ralink/common.h | 5 ++- + arch/mips/ralink/common.h | 2 ++ arch/mips/ralink/of.c | 2 ++ arch/mips/ralink/pinmux.c | 76 +++++++++++++++++++++++++++++++++++++++++++++ - arch/mips/ralink/rt305x.c | 6 ++-- - 5 files changed, 85 insertions(+), 6 deletions(-) + 4 files changed, 81 insertions(+), 1 deletion(-) create mode 100644 arch/mips/ralink/pinmux.c --- a/arch/mips/ralink/Makefile @@ -26,23 +25,11 @@ Signed-off-by: John Crispin -obj-y := prom.o of.o reset.o clk.o irq.o +obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o + obj-$(CONFIG_SOC_RT288X) += rt288x.o obj-$(CONFIG_SOC_RT305X) += rt305x.o - --- a/arch/mips/ralink/common.h +++ b/arch/mips/ralink/common.h -@@ -22,9 +22,10 @@ struct ralink_pinmux { - struct ralink_pinmux_grp *mode; - struct ralink_pinmux_grp *uart; - int uart_shift; -+ u32 uart_mask; - void (*wdt_reset)(void); - }; --extern struct ralink_pinmux gpio_pinmux; -+extern struct ralink_pinmux rt_pinmux; - - struct ralink_soc_info { - unsigned char sys_type[RAMIPS_SYS_TYPE_LEN]; -@@ -41,4 +42,6 @@ extern void prom_soc_init(struct ralink_ +@@ -50,4 +50,6 @@ extern void prom_soc_init(struct ralink_ __iomem void *plat_of_remap_node(const char *node); @@ -51,7 +38,7 @@ Signed-off-by: John Crispin #endif /* _RALINK_COMMON_H__ */ --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c -@@ -101,6 +101,8 @@ static int __init plat_of_setup(void) +@@ -110,6 +110,8 @@ static int __init plat_of_setup(void) if (of_platform_populate(NULL, of_ids, NULL, NULL)) panic("failed to populate DT\n"); @@ -102,7 +89,7 @@ Signed-off-by: John Crispin + return; + + of_property_for_each_string(np, "ralink,gpiomux", prop, pin) { -+ int m = ralink_mux_mask(pin, rt_pinmux.mode); ++ int m = ralink_mux_mask(pin, rt_gpio_pinmux.mode); + if (m) { + mode |= m; + pr_debug("pinmux: registered gpiomux \"%s\"\n", pin); @@ -112,7 +99,7 @@ Signed-off-by: John Crispin + } + + of_property_for_each_string(np, "ralink,pinmux", prop, pin) { -+ int m = ralink_mux_mask(pin, rt_pinmux.mode); ++ int m = ralink_mux_mask(pin, rt_gpio_pinmux.mode); + if (m) { + mode &= ~m; + pr_debug("pinmux: registered pinmux \"%s\"\n", pin); @@ -123,10 +110,10 @@ Signed-off-by: John Crispin + + of_property_read_string(np, "ralink,uartmux", &uart); + if (uart) { -+ int m = ralink_mux_mask(uart, rt_pinmux.uart); -+ mode |= rt_pinmux.uart_mask << rt_pinmux.uart_shift; ++ int m = ralink_mux_mask(uart, rt_gpio_pinmux.uart); ++ mode |= rt_gpio_pinmux.uart_mask << rt_gpio_pinmux.uart_shift; + if (m) { -+ mode &= ~(m << rt_pinmux.uart_shift); ++ mode &= ~(m << rt_gpio_pinmux.uart_shift); + pr_debug("pinmux: registered uartmux \"%s\"\n", uart); + } else { + pr_debug("pinmux: registered uartmux \"gpio\"\n"); @@ -134,33 +121,8 @@ Signed-off-by: John Crispin + } + + wdt = of_get_property(np, "ralink,wdtmux", NULL); -+ if (wdt && *wdt && rt_pinmux.wdt_reset) -+ rt_pinmux.wdt_reset(); ++ if (wdt && *wdt && rt_gpio_pinmux.wdt_reset) ++ rt_gpio_pinmux.wdt_reset(); + + rt_sysc_w32(mode, SYSC_REG_GPIO_MODE); +} ---- a/arch/mips/ralink/rt305x.c -+++ b/arch/mips/ralink/rt305x.c -@@ -97,9 +97,6 @@ struct ralink_pinmux_grp uart_mux[] = { - .mask = RT305X_GPIO_MODE_GPIO_I2S, - .gpio_first = RT305X_GPIO_7, - .gpio_last = RT305X_GPIO_14, -- }, { -- .name = "gpio", -- .mask = RT305X_GPIO_MODE_GPIO, - }, {0} - }; - -@@ -114,10 +111,11 @@ void rt305x_wdt_reset(void) - rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG); - } - --struct ralink_pinmux gpio_pinmux = { -+struct ralink_pinmux rt_pinmux = { - .mode = mode_mux, - .uart = uart_mux, - .uart_shift = RT305X_GPIO_MODE_UART0_SHIFT, -+ .uart_mask = RT305X_GPIO_MODE_GPIO, - .wdt_reset = rt305x_wdt_reset, - }; - diff --git a/target/linux/ramips/patches-3.8/0129-MIPS-ralink-add-cpu-feature-overrides.h-for-RT3x5x-R.patch b/target/linux/ramips/patches-3.8/0129-MIPS-ralink-add-cpu-feature-overrides.h-for-RT3x5x-R.patch deleted file mode 100644 index 52f73203de..0000000000 --- a/target/linux/ramips/patches-3.8/0129-MIPS-ralink-add-cpu-feature-overrides.h-for-RT3x5x-R.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 0eccf6e501337213d1de75dcf8f158d194ae0f77 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Sun, 7 Apr 2013 17:02:27 +0200 -Subject: [PATCH 2/3] MIPS: ralink: add cpu-feature-overrides.h for - RT3x5x/RT5350 SoCs - -Signed-off-by: Gabor Juhos ---- - .../asm/mach-ralink/rt305x/cpu-feature-overrides.h | 56 ++++++++++++++++++++ - arch/mips/ralink/Platform | 1 + - 2 files changed, 57 insertions(+) - create mode 100644 arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h - ---- /dev/null -+++ b/arch/mips/include/asm/mach-ralink/rt305x/cpu-feature-overrides.h -@@ -0,0 +1,56 @@ -+/* -+ * Ralink RT305x specific CPU feature overrides -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This file was derived from: include/asm-mips/cpu-features.h -+ * Copyright (C) 2003, 2004 Ralf Baechle -+ * Copyright (C) 2004 Maciej W. Rozycki -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ */ -+#ifndef _RT305X_CPU_FEATURE_OVERRIDES_H -+#define _RT305X_CPU_FEATURE_OVERRIDES_H -+ -+#define cpu_has_tlb 1 -+#define cpu_has_4kex 1 -+#define cpu_has_3k_cache 0 -+#define cpu_has_4k_cache 1 -+#define cpu_has_tx39_cache 0 -+#define cpu_has_sb1_cache 0 -+#define cpu_has_fpu 0 -+#define cpu_has_32fpr 0 -+#define cpu_has_counter 1 -+#define cpu_has_watch 1 -+#define cpu_has_divec 1 -+ -+#define cpu_has_prefetch 1 -+#define cpu_has_ejtag 1 -+#define cpu_has_llsc 1 -+ -+#define cpu_has_mips16 1 -+#define cpu_has_mdmx 0 -+#define cpu_has_mips3d 0 -+#define cpu_has_smartmips 0 -+ -+#define cpu_has_mips32r1 1 -+#define cpu_has_mips32r2 1 -+#define cpu_has_mips64r1 0 -+#define cpu_has_mips64r2 0 -+ -+#define cpu_has_dsp 1 -+#define cpu_has_mipsmt 0 -+ -+#define cpu_has_64bits 0 -+#define cpu_has_64bit_zero_reg 0 -+#define cpu_has_64bit_gp_regs 0 -+#define cpu_has_64bit_addresses 0 -+ -+#define cpu_dcache_line_size() 32 -+#define cpu_icache_line_size() 32 -+ -+#endif /* _RT305X_CPU_FEATURE_OVERRIDES_H */ ---- a/arch/mips/ralink/Platform -+++ b/arch/mips/ralink/Platform -@@ -14,6 +14,7 @@ cflags-$(CONFIG_SOC_RT288X) += -I$(srctr - # Ralink RT305x - # - load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000 -+cflags-$(CONFIG_SOC_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x - - # - # Ralink RT3883 diff --git a/target/linux/ramips/patches-3.8/0113-MIPS-ralink-add-support-for-periodic-timer-irq.patch b/target/linux/ramips/patches-3.8/0129-MIPS-ralink-add-support-for-periodic-timer-irq.patch similarity index 97% rename from target/linux/ramips/patches-3.8/0113-MIPS-ralink-add-support-for-periodic-timer-irq.patch rename to target/linux/ramips/patches-3.8/0129-MIPS-ralink-add-support-for-periodic-timer-irq.patch index 128a606e64..6664e11e45 100644 --- a/target/linux/ramips/patches-3.8/0113-MIPS-ralink-add-support-for-periodic-timer-irq.patch +++ b/target/linux/ramips/patches-3.8/0129-MIPS-ralink-add-support-for-periodic-timer-irq.patch @@ -1,7 +1,7 @@ -From cdbc5a9dbd78a771edb6c211edbc677596cbd17f Mon Sep 17 00:00:00 2001 +From 1f307fd0fdca585d5c7c32963e8a8a6f38d8a78c Mon Sep 17 00:00:00 2001 From: John Crispin Date: Sat, 23 Mar 2013 19:44:41 +0100 -Subject: [PATCH 113/121] MIPS: ralink: add support for periodic timer irq +Subject: [PATCH 129/137] MIPS: ralink: add support for periodic timer irq Adds a driver for the periodic timer found on Ralink SoC. diff --git a/target/linux/ramips/patches-3.8/0114-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch b/target/linux/ramips/patches-3.8/0130-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch similarity index 98% rename from target/linux/ramips/patches-3.8/0114-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch rename to target/linux/ramips/patches-3.8/0130-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch index b0ea011ab5..6f448882b1 100644 --- a/target/linux/ramips/patches-3.8/0114-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch +++ b/target/linux/ramips/patches-3.8/0130-GPIO-MIPS-ralink-adds-ralink-gpio-support.patch @@ -1,7 +1,7 @@ -From f22c157f44c93d61058d2e2aa5626ee2899fde5a Mon Sep 17 00:00:00 2001 +From 007ab7fe49bfcaa220372260eedeb4eed51f1631 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Tue, 22 Jan 2013 18:24:34 +0100 -Subject: [PATCH 114/121] GPIO: MIPS: ralink: adds ralink gpio support +Subject: [PATCH 130/137] GPIO: MIPS: ralink: adds ralink gpio support Add gpio driver for Ralink SoC. This driver makes the gpio core on RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work. diff --git a/target/linux/ramips/patches-3.8/0130-MIPS-ralink-add-cpu-feature-overrides.h-for-RT3662-3.patch b/target/linux/ramips/patches-3.8/0130-MIPS-ralink-add-cpu-feature-overrides.h-for-RT3662-3.patch deleted file mode 100644 index 5d92e36db8..0000000000 --- a/target/linux/ramips/patches-3.8/0130-MIPS-ralink-add-cpu-feature-overrides.h-for-RT3662-3.patch +++ /dev/null @@ -1,81 +0,0 @@ -From 4cca623b74420aacf656b968fde29aace96ae3db Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Sun, 7 Apr 2013 16:57:30 +0200 -Subject: [PATCH 3/3] MIPS: ralink: add cpu-feature-overrides.h for - RT3662/3883 SoCs - -Signed-off-by: Gabor Juhos ---- - .../asm/mach-ralink/rt3883/cpu-feature-overrides.h | 55 ++++++++++++++++++++ - arch/mips/ralink/Platform | 1 + - 2 files changed, 56 insertions(+) - create mode 100644 arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h - ---- /dev/null -+++ b/arch/mips/include/asm/mach-ralink/rt3883/cpu-feature-overrides.h -@@ -0,0 +1,55 @@ -+/* -+ * Ralink RT3662/RT3883 specific CPU feature overrides -+ * -+ * Copyright (C) 2011-2013 Gabor Juhos -+ * -+ * This file was derived from: include/asm-mips/cpu-features.h -+ * Copyright (C) 2003, 2004 Ralf Baechle -+ * Copyright (C) 2004 Maciej W. Rozycki -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ */ -+#ifndef _RT3883_CPU_FEATURE_OVERRIDES_H -+#define _RT3883_CPU_FEATURE_OVERRIDES_H -+ -+#define cpu_has_tlb 1 -+#define cpu_has_4kex 1 -+#define cpu_has_3k_cache 0 -+#define cpu_has_4k_cache 1 -+#define cpu_has_tx39_cache 0 -+#define cpu_has_sb1_cache 0 -+#define cpu_has_fpu 0 -+#define cpu_has_32fpr 0 -+#define cpu_has_counter 1 -+#define cpu_has_watch 1 -+#define cpu_has_divec 1 -+ -+#define cpu_has_prefetch 1 -+#define cpu_has_ejtag 1 -+#define cpu_has_llsc 1 -+ -+#define cpu_has_mips16 1 -+#define cpu_has_mdmx 0 -+#define cpu_has_mips3d 0 -+#define cpu_has_smartmips 0 -+ -+#define cpu_has_mips32r1 1 -+#define cpu_has_mips32r2 1 -+#define cpu_has_mips64r1 0 -+#define cpu_has_mips64r2 0 -+ -+#define cpu_has_dsp 1 -+#define cpu_has_mipsmt 0 -+ -+#define cpu_has_64bits 0 -+#define cpu_has_64bit_zero_reg 0 -+#define cpu_has_64bit_gp_regs 0 -+#define cpu_has_64bit_addresses 0 -+ -+#define cpu_dcache_line_size() 32 -+#define cpu_icache_line_size() 32 -+ -+#endif /* _RT3883_CPU_FEATURE_OVERRIDES_H */ ---- a/arch/mips/ralink/Platform -+++ b/arch/mips/ralink/Platform -@@ -20,6 +20,7 @@ cflags-$(CONFIG_SOC_RT305X) += -I$(srctr - # Ralink RT3883 - # - load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000 -+cflags-$(CONFIG_SOC_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883 - - # - # Ralink MT7620 diff --git a/target/linux/ramips/patches-3.8/0115-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-3.8/0131-SPI-ralink-add-Ralink-SoC-spi-driver.patch similarity index 98% rename from target/linux/ramips/patches-3.8/0115-SPI-ralink-add-Ralink-SoC-spi-driver.patch rename to target/linux/ramips/patches-3.8/0131-SPI-ralink-add-Ralink-SoC-spi-driver.patch index b2717d139f..8217b48318 100644 --- a/target/linux/ramips/patches-3.8/0115-SPI-ralink-add-Ralink-SoC-spi-driver.patch +++ b/target/linux/ramips/patches-3.8/0131-SPI-ralink-add-Ralink-SoC-spi-driver.patch @@ -1,7 +1,7 @@ -e8c5ebbd743dac63178807c0f68fe1b75680474a3 Mon Sep 17 00:00:00 2001 +From 32c1cff4c75925a0bbd305e85ed4adb30140cd42 Mon Sep 17 00:00:00 2001 From: John Crispin -Date: Wed, 30 Jan 2013 17:58:15 +0100 -Subject: [PATCH 115/121] SPI: ralink: add Ralink SoC spi driver +Date: Mon, 22 Apr 2013 23:16:18 +0200 +Subject: [PATCH 131/137] SPI: ralink: add Ralink SoC spi driver Add the driver needed to make SPI work on Ralink SoC. diff --git a/target/linux/ramips/patches-3.8/0132-NET-ramips-fix-mdio-bus-support.patch b/target/linux/ramips/patches-3.8/0132-NET-ramips-fix-mdio-bus-support.patch deleted file mode 100644 index eb7badfd52..0000000000 --- a/target/linux/ramips/patches-3.8/0132-NET-ramips-fix-mdio-bus-support.patch +++ /dev/null @@ -1,222 +0,0 @@ ---- a/drivers/net/ethernet/ramips/ramips_main.c -+++ b/drivers/net/ethernet/ramips/ramips_main.c -@@ -28,6 +28,7 @@ - #include - #include - #include -+#include - - #include "ramips_eth.h" - -@@ -406,12 +407,25 @@ ramips_mdio_reset(struct mii_bus *bus) - static int - ramips_mdio_init(struct raeth_priv *re) - { -+ struct device_node *mii_np; - int err; -- int i; -+ -+ mii_np = of_get_child_by_name(re->of_node, "mdio-bus"); -+ if (!mii_np) { -+ dev_err(re->parent, "no %s child node found", "mdio-bus"); -+ return -ENODEV; -+ } -+ -+ if (!of_device_is_available(mii_np)) { -+ err = 0; -+ goto err_put_node; -+ } - - re->mii_bus = mdiobus_alloc(); -- if (re->mii_bus == NULL) -- return -ENOMEM; -+ if (re->mii_bus == NULL) { -+ err = -ENOMEM; -+ goto err_put_node; -+ } - - re->mii_bus->name = "ramips_mdio"; - re->mii_bus->read = ramips_mdio_read; -@@ -422,12 +436,7 @@ ramips_mdio_init(struct raeth_priv *re) - re->mii_bus->parent = re->parent; - - snprintf(re->mii_bus->id, MII_BUS_ID_SIZE, "%s", "ramips_mdio"); -- re->mii_bus->phy_mask = 0; -- -- for (i = 0; i < PHY_MAX_ADDR; i++) -- re->mii_irq[i] = PHY_POLL; -- -- err = mdiobus_register(re->mii_bus); -+ err = of_mdiobus_register(re->mii_bus, mii_np); - if (err) - goto err_free_bus; - -@@ -435,13 +444,20 @@ ramips_mdio_init(struct raeth_priv *re) - - err_free_bus: - kfree(re->mii_bus); -+err_put_node: -+ of_node_put(mii_np); -+ re->mii_bus = NULL; - return err; - } - - static void - ramips_mdio_cleanup(struct raeth_priv *re) - { -+ if (!re->mii_bus) -+ return; -+ - mdiobus_unregister(re->mii_bus); -+ of_node_put(re->mii_bus->dev.of_node); - kfree(re->mii_bus); - } - -@@ -474,106 +490,86 @@ ramips_phy_link_adjust(struct net_device - } - - static int --ramips_phy_connect_multi(struct raeth_priv *re) -+ramips_phy_connect_by_node(struct raeth_priv *re, struct device_node *phy_node) - { -- struct net_device *netdev = re->netdev; -- struct phy_device *phydev = NULL; -- int phy_addr; -- int ret = 0; -- -- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { -- if (!(re->phy_mask & (1 << phy_addr))) -- continue; -- -- if (re->mii_bus->phy_map[phy_addr] == NULL) -- continue; -+ struct phy_device *phydev; -+ int phy_mode; - -- RADEBUG("%s: PHY found at %s, uid=%08x\n", -- netdev->name, -- dev_name(&re->mii_bus->phy_map[phy_addr]->dev), -- re->mii_bus->phy_map[phy_addr]->phy_id); -- -- if (phydev == NULL) -- phydev = re->mii_bus->phy_map[phy_addr]; -- } -- -- if (!phydev) { -- netdev_err(netdev, "no PHY found with phy_mask=%08x\n", -- re->phy_mask); -- return -ENODEV; -+ phy_mode = of_get_phy_mode(re->of_node); -+ if (phy_mode < 0) { -+ dev_err(re->parent, "incorrect phy-mode\n"); -+ return -EINVAL; - } - -- re->phy_dev = phy_connect(netdev, dev_name(&phydev->dev), -- ramips_phy_link_adjust, 0, re->phy_if_mode); -- -- if (IS_ERR(re->phy_dev)) { -- netdev_err(netdev, "could not connect to PHY at %s\n", -- dev_name(&phydev->dev)); -+ phydev = of_phy_connect(re->netdev, phy_node, ramips_phy_link_adjust, -+ 0, phy_mode); -+ if (IS_ERR(phydev)) { -+ dev_err(re->parent, "could not connect to PHY\n"); - return PTR_ERR(re->phy_dev); - } - - phydev->supported &= PHY_GBIT_FEATURES; - phydev->advertising = phydev->supported; - -- RADEBUG("%s: connected to PHY at %s [uid=%08x, driver=%s]\n", -- netdev->name, dev_name(&phydev->dev), -- phydev->phy_id, phydev->drv->name); -+ dev_info(re->parent, -+ "connected to PHY at %s [uid=%08x, driver=%s]\n", -+ dev_name(&phydev->dev), phydev->phy_id, -+ phydev->drv->name); - -+ re->phy_dev = phydev; - re->link = 0; - re->speed = 0; - re->duplex = -1; - re->rx_fc = 0; - re->tx_fc = 0; - -- return ret; -+ return 0; - } - - static int --ramips_phy_connect_fixed(struct raeth_priv *re) -+ramips_phy_connect_fixed(struct raeth_priv *re, const __be32 *link, int size) - { -- if (!re->speed) { -- const __be32 *link; -- int size; -- -- link = of_get_property(re->of_node, -- "ralink,fixed-link", &size); -- if (!link || size != (4 * sizeof(*link))) -- return -ENOENT; -- -- re->speed = be32_to_cpup(link++); -- re->duplex = be32_to_cpup(link++); -- re->tx_fc = be32_to_cpup(link++); -- re->rx_fc = be32_to_cpup(link++); -+ if (size != (4 * sizeof(*link))) { -+ dev_err(re->parent, "invalid fixed-link property\n"); -+ return -EINVAL; - } - -+ re->speed = be32_to_cpup(link++); -+ re->duplex = be32_to_cpup(link++); -+ re->tx_fc = be32_to_cpup(link++); -+ re->rx_fc = be32_to_cpup(link++); -+ - switch (re->speed) { - case SPEED_10: - case SPEED_100: - case SPEED_1000: - break; - default: -- netdev_err(re->netdev, "invalid speed specified\n"); -+ dev_err(re->parent, "invalid link speed: %d\n", re->speed); - return -EINVAL; - } - -- pr_info("%s: using fixed link parameters\n", re->netdev->name); -+ dev_info(re->parent, "using fixed link parameters\n"); - return 0; - } - - static int - ramips_phy_connect(struct raeth_priv *re) - { -- const __be32 *mask; -- -- mask = of_get_property(re->of_node, "ralink,phy-mask", NULL); -- re->phy_if_mode = of_get_phy_mode(re->of_node); -- -- if (!re->phy_if_mode || !mask) -- return ramips_phy_connect_fixed(re); -- -- re->phy_mask = be32_to_cpup(mask); -- return ramips_phy_connect_multi(re); -+ struct device_node *phy_node; -+ const __be32 *p32; -+ int size; -+ -+ phy_node = of_parse_phandle(re->of_node, "phy-handle", 0); -+ if (phy_node) -+ return ramips_phy_connect_by_node(re, phy_node); -+ -+ p32 = of_get_property(re->of_node, "ralink,fixed-link", &size); -+ if (p32) -+ return ramips_phy_connect_fixed(re, p32, size); - -+ dev_err(re->parent, "unable to get connection type\n"); -+ return -EINVAL; - } - - static void diff --git a/target/linux/ramips/patches-3.8/0116-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch b/target/linux/ramips/patches-3.8/0132-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch similarity index 86% rename from target/linux/ramips/patches-3.8/0116-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch rename to target/linux/ramips/patches-3.8/0132-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch index a5a3770c14..bff0799ed2 100644 --- a/target/linux/ramips/patches-3.8/0116-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch +++ b/target/linux/ramips/patches-3.8/0132-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch @@ -1,7 +1,7 @@ -From 6ffb42870411ca082e8e46d96d72bc5d8881ce8d Mon Sep 17 00:00:00 2001 +From 15bcdbd78abacbe0986a1904d2e2b5dcfe780b5b Mon Sep 17 00:00:00 2001 From: John Crispin Date: Tue, 22 Jan 2013 16:01:07 +0100 -Subject: [PATCH 116/121] serial: of: allow au1x00 and rt288x to load from OF +Subject: [PATCH 132/137] serial: of: allow au1x00 and rt288x to load from OF In order to make serial_8250 loadable via OF on Au1x00 and Ralink WiSoC we need to default the iotype to UPIO_AU. diff --git a/target/linux/ramips/patches-3.8/0117-serial-ralink-adds-mt7620-serial.patch b/target/linux/ramips/patches-3.8/0133-serial-ralink-adds-mt7620-serial.patch similarity index 86% rename from target/linux/ramips/patches-3.8/0117-serial-ralink-adds-mt7620-serial.patch rename to target/linux/ramips/patches-3.8/0133-serial-ralink-adds-mt7620-serial.patch index 745a23602a..1fce223ddb 100644 --- a/target/linux/ramips/patches-3.8/0117-serial-ralink-adds-mt7620-serial.patch +++ b/target/linux/ramips/patches-3.8/0133-serial-ralink-adds-mt7620-serial.patch @@ -1,7 +1,7 @@ -From c1e24bf32404bec0032221b9ea37d6fd8c45dbdd Mon Sep 17 00:00:00 2001 +From 6471ee7bbf3f8b70267ba1dc93f067e18803c246 Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 15 Mar 2013 18:16:01 +0100 -Subject: [PATCH 117/121] serial: ralink: adds mt7620 serial +Subject: [PATCH 133/137] serial: ralink: adds mt7620 serial Add the config symbol for Mediatek7620 SoC to SERIAL_8250_RT288X diff --git a/target/linux/ramips/patches-3.8/0118-PCI-MIPS-adds-rt2880-pci-support.patch b/target/linux/ramips/patches-3.8/0134-PCI-MIPS-adds-rt2880-pci-support.patch similarity index 98% rename from target/linux/ramips/patches-3.8/0118-PCI-MIPS-adds-rt2880-pci-support.patch rename to target/linux/ramips/patches-3.8/0134-PCI-MIPS-adds-rt2880-pci-support.patch index dc0622805b..70758f1422 100644 --- a/target/linux/ramips/patches-3.8/0118-PCI-MIPS-adds-rt2880-pci-support.patch +++ b/target/linux/ramips/patches-3.8/0134-PCI-MIPS-adds-rt2880-pci-support.patch @@ -1,7 +1,7 @@ -From 028f340b63bf722e8807b31ef955484acf2cce47 Mon Sep 17 00:00:00 2001 +From 55e9ae6a23cb799b7c1d402e1cfda11a6bd1e86e Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 21 Mar 2013 18:27:29 +0100 -Subject: [PATCH 118/121] PCI: MIPS: adds rt2880 pci support +Subject: [PATCH 134/137] PCI: MIPS: adds rt2880 pci support Add support for the pci found on the rt2880 SoC. diff --git a/target/linux/ramips/patches-3.8/0131-MIPS-pci-rt3883-rewrite.patch b/target/linux/ramips/patches-3.8/0135-PCI-MIPS-adds-rt3883-pci-support.patch similarity index 52% rename from target/linux/ramips/patches-3.8/0131-MIPS-pci-rt3883-rewrite.patch rename to target/linux/ramips/patches-3.8/0135-PCI-MIPS-adds-rt3883-pci-support.patch index c493049305..9c4ca82404 100644 --- a/target/linux/ramips/patches-3.8/0131-MIPS-pci-rt3883-rewrite.patch +++ b/target/linux/ramips/patches-3.8/0135-PCI-MIPS-adds-rt3883-pci-support.patch @@ -1,44 +1,61 @@ ---- a/arch/mips/pci/pci-rt3883.c +From 2a5dccdb00d85a6ad6111d7a2b13f9f4fae35838 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 21 Mar 2013 17:34:08 +0100 +Subject: [PATCH 135/137] PCI: MIPS: adds rt3883 pci support + +Add support for the pcie found on the rt3883 SoC. + +Signed-off-by: John Crispin +--- + arch/mips/pci/Makefile | 1 + + arch/mips/pci/pci-rt3883.c | 640 ++++++++++++++++++++++++++++++++++++++++++++ + arch/mips/ralink/Kconfig | 1 + + 3 files changed, 642 insertions(+) + create mode 100644 arch/mips/pci/pci-rt3883.c + +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -43,6 +43,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops + obj-$(CONFIG_LANTIQ) += fixup-lantiq.o + obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o + obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o ++obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o + obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o + obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o + obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o +--- /dev/null +++ b/arch/mips/pci/pci-rt3883.c -@@ -1,7 +1,7 @@ - /* -- * Ralink RT3883 SoC PCI support +@@ -0,0 +1,640 @@ ++/* + * Ralink RT3662/RT3883 SoC PCI support - * -- * Copyright (C) 2011-2012 Gabor Juhos ++ * + * Copyright (C) 2011-2013 Gabor Juhos - * - * Parts of this file are based on Ralink's 2.6.21 BSP - * -@@ -16,52 +16,82 @@ - #include - #include - #include ++ * ++ * Parts of this file are based on Ralink's 2.6.21 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include +#include +#include +#include +#include +#include - - #include --#include ++ ++#include +#include - - #define RT3883_MEMORY_BASE 0x00000000 - #define RT3883_MEMORY_SIZE 0x02000000 - --#define RT3883_PCI_MEM_BASE 0x20000000 --#define RT3883_PCI_MEM_SIZE 0x10000000 --#define RT3883_PCI_IO_BASE 0x10160000 --#define RT3883_PCI_IO_SIZE 0x00010000 -- --#define RT3883_PCI_REG_PCICFG_ADDR 0x00 --#define RT3883_PCI_REG_PCIRAW_ADDR 0x04 --#define RT3883_PCI_REG_PCIINT_ADDR 0x08 --#define RT3883_PCI_REG_PCIMSK_ADDR 0x0c --#define RT3833_PCI_PCIINT_PCIE BIT(20) --#define RT3833_PCI_PCIINT_PCI1 BIT(19) --#define RT3833_PCI_PCIINT_PCI0 BIT(18) ++ ++#define RT3883_MEMORY_BASE 0x00000000 ++#define RT3883_MEMORY_SIZE 0x02000000 ++ +#define RT3883_PCI_REG_PCICFG 0x00 +#define RT3883_PCICFG_P2P_BR_DEVNUM_M 0xf +#define RT3883_PCICFG_P2P_BR_DEVNUM_S 16 @@ -46,34 +63,26 @@ +#define RT3883_PCI_REG_PCIRAW 0x04 +#define RT3883_PCI_REG_PCIINT 0x08 +#define RT3883_PCI_REG_PCIENA 0x0c - --#define RT3883_PCI_REG_CONFIG_ADDR 0x20 --#define RT3883_PCI_REG_CONFIG_DATA 0x24 ++ +#define RT3883_PCI_REG_CFGADDR 0x20 +#define RT3883_PCI_REG_CFGDATA 0x24 - #define RT3883_PCI_REG_MEMBASE 0x28 - #define RT3883_PCI_REG_IOBASE 0x2c - #define RT3883_PCI_REG_ARBCTL 0x80 - - #define RT3883_PCI_REG_BASE(_x) (0x1000 + (_x) * 0x1000) --#define RT3883_PCI_REG_BAR0SETUP_ADDR(_x) (RT3883_PCI_REG_BASE((_x)) + 0x10) --#define RT3883_PCI_REG_IMBASEBAR0_ADDR(_x) (RT3883_PCI_REG_BASE((_x)) + 0x18) ++#define RT3883_PCI_REG_MEMBASE 0x28 ++#define RT3883_PCI_REG_IOBASE 0x2c ++#define RT3883_PCI_REG_ARBCTL 0x80 ++ ++#define RT3883_PCI_REG_BASE(_x) (0x1000 + (_x) * 0x1000) +#define RT3883_PCI_REG_BAR0SETUP(_x) (RT3883_PCI_REG_BASE((_x)) + 0x10) +#define RT3883_PCI_REG_IMBASEBAR0(_x) (RT3883_PCI_REG_BASE((_x)) + 0x18) - #define RT3883_PCI_REG_ID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x30) - #define RT3883_PCI_REG_CLASS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x34) - #define RT3883_PCI_REG_SUBID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x38) - #define RT3883_PCI_REG_STATUS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x50) - --static int (*rt3883_pci_plat_dev_init)(struct pci_dev *dev); --static void __iomem *rt3883_pci_base; --static DEFINE_SPINLOCK(rt3883_pci_lock); ++#define RT3883_PCI_REG_ID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x30) ++#define RT3883_PCI_REG_CLASS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x34) ++#define RT3883_PCI_REG_SUBID(_x) (RT3883_PCI_REG_BASE((_x)) + 0x38) ++#define RT3883_PCI_REG_STATUS(_x) (RT3883_PCI_REG_BASE((_x)) + 0x50) ++ +#define RT3883_PCI_MODE_NONE 0 +#define RT3883_PCI_MODE_PCI BIT(0) +#define RT3883_PCI_MODE_PCIE BIT(1) +#define RT3883_PCI_MODE_BOTH (RT3883_PCI_MODE_PCI | RT3883_PCI_MODE_PCIE) - --static inline u32 rt3883_pci_rr(unsigned reg) ++ +#define RT3883_PCI_IRQ_COUNT 32 + +#define RT3883_P2P_BR_DEVNUM 1 @@ -94,8 +103,7 @@ + +static inline struct rt3883_pci_controller * +pci_bus_to_rt3883_controller(struct pci_bus *bus) - { -- return readl(rt3883_pci_base + reg); ++{ + struct pci_controller *hose; + + hose = (struct pci_controller *) bus->sysdata; @@ -106,168 +114,115 @@ + unsigned reg) +{ + return ioread32(rpc->base + reg); - } - --static inline void rt3883_pci_wr(u32 val, unsigned reg) ++} ++ +static inline void rt3883_pci_w32(struct rt3883_pci_controller *rpc, + u32 val, unsigned reg) - { -- writel(val, rt3883_pci_base + reg); ++{ + iowrite32(val, rpc->base + reg); - } - - static inline u32 rt3883_pci_get_cfgaddr(unsigned int bus, unsigned int slot, -@@ -71,7 +101,8 @@ static inline u32 rt3883_pci_get_cfgaddr - 0x80000000); - } - --static u32 rt3883_pci_read_u32(unsigned bus, unsigned slot, ++} ++ ++static inline u32 rt3883_pci_get_cfgaddr(unsigned int bus, unsigned int slot, ++ unsigned int func, unsigned int where) ++{ ++ return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | ++ 0x80000000); ++} ++ +static u32 rt3883_pci_read_cfg32(struct rt3883_pci_controller *rpc, + unsigned bus, unsigned slot, - unsigned func, unsigned reg) - { - unsigned long flags; -@@ -80,15 +111,16 @@ static u32 rt3883_pci_read_u32(unsigned - - address = rt3883_pci_get_cfgaddr(bus, slot, func, reg); - -- spin_lock_irqsave(&rt3883_pci_lock, flags); -- rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); -- ret = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); -- spin_unlock_irqrestore(&rt3883_pci_lock, flags); ++ unsigned func, unsigned reg) ++{ ++ unsigned long flags; ++ u32 address; ++ u32 ret; ++ ++ address = rt3883_pci_get_cfgaddr(bus, slot, func, reg); ++ + spin_lock_irqsave(&rpc->lock, flags); + rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR); + ret = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA); + spin_unlock_irqrestore(&rpc->lock, flags); - - return ret; - } - --static void rt3883_pci_write_u32(unsigned bus, unsigned slot, ++ ++ return ret; ++} ++ +static void rt3883_pci_write_cfg32(struct rt3883_pci_controller *rpc, + unsigned bus, unsigned slot, - unsigned func, unsigned reg, u32 val) - { - unsigned long flags; -@@ -96,84 +128,61 @@ static void rt3883_pci_write_u32(unsigne - - address = rt3883_pci_get_cfgaddr(bus, slot, func, reg); - -- spin_lock_irqsave(&rt3883_pci_lock, flags); -- rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); -- rt3883_pci_wr(val, RT3883_PCI_REG_CONFIG_DATA); -- spin_unlock_irqrestore(&rt3883_pci_lock, flags); ++ unsigned func, unsigned reg, u32 val) ++{ ++ unsigned long flags; ++ u32 address; ++ ++ address = rt3883_pci_get_cfgaddr(bus, slot, func, reg); ++ + spin_lock_irqsave(&rpc->lock, flags); + rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR); + rt3883_pci_w32(rpc, val, RT3883_PCI_REG_CFGDATA); + spin_unlock_irqrestore(&rpc->lock, flags); - } - - static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc) - { ++} ++ ++static void rt3883_pci_irq_handler(unsigned int irq, struct irq_desc *desc) ++{ + struct rt3883_pci_controller *rpc; - u32 pending; - -- pending = rt3883_pci_rr(RT3883_PCI_REG_PCIINT_ADDR) & -- rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); ++ u32 pending; ++ + rpc = irq_get_handler_data(irq); + + pending = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIINT) & + rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA); - - if (!pending) { - spurious_interrupt(); - return; - } - -- if (pending & RT3833_PCI_PCIINT_PCI0) -- generic_handle_irq(RT3883_PCI_IRQ_PCI0); ++ ++ if (!pending) { ++ spurious_interrupt(); ++ return; ++ } ++ + while (pending) { + unsigned bit = __ffs(pending); - -- if (pending & RT3833_PCI_PCIINT_PCI1) -- generic_handle_irq(RT3883_PCI_IRQ_PCI1); ++ + irq = irq_find_mapping(rpc->irq_domain, bit); + generic_handle_irq(irq); - -- if (pending & RT3833_PCI_PCIINT_PCIE) -- generic_handle_irq(RT3883_PCI_IRQ_PCIE); ++ + pending &= ~BIT(bit); + } - } - - static void rt3883_pci_irq_unmask(struct irq_data *d) - { -- int irq = d->irq; -- u32 mask; ++} ++ ++static void rt3883_pci_irq_unmask(struct irq_data *d) ++{ + struct rt3883_pci_controller *rpc; - u32 t; - -- switch (irq) { -- case RT3883_PCI_IRQ_PCI0: -- mask = RT3833_PCI_PCIINT_PCI0; -- break; -- case RT3883_PCI_IRQ_PCI1: -- mask = RT3833_PCI_PCIINT_PCI1; -- break; -- case RT3883_PCI_IRQ_PCIE: -- mask = RT3833_PCI_PCIINT_PCIE; -- break; -- default: -- BUG(); -- } ++ u32 t; ++ + rpc = irq_data_get_irq_chip_data(d); - -- t = rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); -- rt3883_pci_wr(t | mask, RT3883_PCI_REG_PCIMSK_ADDR); ++ + t = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA); + rt3883_pci_w32(rpc, t | BIT(d->hwirq), RT3883_PCI_REG_PCIENA); - /* flush write */ -- rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); ++ /* flush write */ + rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA); - } - - static void rt3883_pci_irq_mask(struct irq_data *d) - { -- int irq = d->irq; -- u32 mask; ++} ++ ++static void rt3883_pci_irq_mask(struct irq_data *d) ++{ + struct rt3883_pci_controller *rpc; - u32 t; - -- switch (irq) { -- case RT3883_PCI_IRQ_PCI0: -- mask = RT3833_PCI_PCIINT_PCI0; -- break; -- case RT3883_PCI_IRQ_PCI1: -- mask = RT3833_PCI_PCIINT_PCI1; -- break; -- case RT3883_PCI_IRQ_PCIE: -- mask = RT3833_PCI_PCIINT_PCIE; -- break; -- default: -- BUG(); -- } ++ u32 t; ++ + rpc = irq_data_get_irq_chip_data(d); - -- t = rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); -- rt3883_pci_wr(t & ~mask, RT3883_PCI_REG_PCIMSK_ADDR); ++ + t = rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA); + rt3883_pci_w32(rpc, t & ~BIT(d->hwirq), RT3883_PCI_REG_PCIENA); - /* flush write */ -- rt3883_pci_rr(RT3883_PCI_REG_PCIMSK_ADDR); ++ /* flush write */ + rt3883_pci_r32(rpc, RT3883_PCI_REG_PCIENA); - } - - static struct irq_chip rt3883_pci_irq_chip = { -@@ -183,36 +192,84 @@ static struct irq_chip rt3883_pci_irq_ch - .irq_mask_ack = rt3883_pci_irq_mask, - }; - --static void __init rt3883_pci_irq_init(void) ++} ++ ++static struct irq_chip rt3883_pci_irq_chip = { ++ .name = "RT3883 PCI", ++ .irq_mask = rt3883_pci_irq_mask, ++ .irq_unmask = rt3883_pci_irq_unmask, ++ .irq_mask_ack = rt3883_pci_irq_mask, ++}; ++ +static int rt3883_pci_irq_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) - { -- int i; ++{ + irq_set_chip_and_handler(irq, &rt3883_pci_irq_chip, handle_level_irq); + irq_set_chip_data(irq, d->host_data); + @@ -299,15 +254,10 @@ + err = -EINVAL; + goto err_put_intc; + } - - /* disable all interrupts */ -- rt3883_pci_wr(0, RT3883_PCI_REG_PCIMSK_ADDR); ++ ++ /* disable all interrupts */ + rt3883_pci_w32(rpc, 0, RT3883_PCI_REG_PCIENA); - -- for (i = RT3883_PCI_IRQ_BASE; -- i < RT3883_PCI_IRQ_BASE + RT3883_PCI_IRQ_COUNT; i++) { -- irq_set_chip_and_handler(i, &rt3883_pci_irq_chip, -- handle_level_irq); ++ + rpc->irq_domain = + irq_domain_add_linear(intc_np, RT3883_PCI_IRQ_COUNT, + &rt3883_pci_irq_domain_ops, @@ -316,9 +266,8 @@ + dev_err(dev, "unable to add IRQ domain\n"); + err = -ENODEV; + goto err_put_intc; - } - -- irq_set_chained_handler(RT3883_CPU_IRQ_PCI, rt3883_pci_irq_handler); ++ } ++ + irq_set_handler_data(irq, rpc); + irq_set_chained_handler(irq, rt3883_pci_irq_handler); + @@ -327,133 +276,104 @@ +err_put_intc: + of_node_put(intc_np); + return err; - } - - static int rt3883_pci_config_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) - { ++} ++ ++static int rt3883_pci_config_read(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 *val) ++{ + struct rt3883_pci_controller *rpc; - unsigned long flags; - u32 address; - u32 data; - ++ unsigned long flags; ++ u32 address; ++ u32 data; ++ + rpc = pci_bus_to_rt3883_controller(bus); + + if (!rpc->pcie_ready && bus->number == 1) + return PCIBIOS_DEVICE_NOT_FOUND; + - address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn), where); - -- spin_lock_irqsave(&rt3883_pci_lock, flags); -- rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); -- data = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); -- spin_unlock_irqrestore(&rt3883_pci_lock, flags); ++ address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), where); ++ + spin_lock_irqsave(&rpc->lock, flags); + rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR); + data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA); + spin_unlock_irqrestore(&rpc->lock, flags); - - switch (size) { - case 1: -@@ -232,16 +289,22 @@ static int rt3883_pci_config_read(struct - static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) - { ++ ++ switch (size) { ++ case 1: ++ *val = (data >> ((where & 3) << 3)) & 0xff; ++ break; ++ case 2: ++ *val = (data >> ((where & 3) << 3)) & 0xffff; ++ break; ++ case 4: ++ *val = data; ++ break; ++ } ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int rt3883_pci_config_write(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 val) ++{ + struct rt3883_pci_controller *rpc; - unsigned long flags; - u32 address; - u32 data; - ++ unsigned long flags; ++ u32 address; ++ u32 data; ++ + rpc = pci_bus_to_rt3883_controller(bus); + + if (!rpc->pcie_ready && bus->number == 1) + return PCIBIOS_DEVICE_NOT_FOUND; + - address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), - PCI_FUNC(devfn), where); - -- spin_lock_irqsave(&rt3883_pci_lock, flags); -- rt3883_pci_wr(address, RT3883_PCI_REG_CONFIG_ADDR); -- data = rt3883_pci_rr(RT3883_PCI_REG_CONFIG_DATA); ++ address = rt3883_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), where); ++ + spin_lock_irqsave(&rpc->lock, flags); + rt3883_pci_w32(rpc, address, RT3883_PCI_REG_CFGADDR); + data = rt3883_pci_r32(rpc, RT3883_PCI_REG_CFGDATA); - - switch (size) { - case 1: -@@ -257,8 +320,8 @@ static int rt3883_pci_config_write(struc - break; - } - -- rt3883_pci_wr(data, RT3883_PCI_REG_CONFIG_DATA); -- spin_unlock_irqrestore(&rt3883_pci_lock, flags); ++ ++ switch (size) { ++ case 1: ++ data = (data & ~(0xff << ((where & 3) << 3))) | ++ (val << ((where & 3) << 3)); ++ break; ++ case 2: ++ data = (data & ~(0xffff << ((where & 3) << 3))) | ++ (val << ((where & 3) << 3)); ++ break; ++ case 4: ++ data = val; ++ break; ++ } ++ + rt3883_pci_w32(rpc, data, RT3883_PCI_REG_CFGDATA); + spin_unlock_irqrestore(&rpc->lock, flags); - - return PCIBIOS_SUCCESSFUL; - } -@@ -268,220 +331,310 @@ static struct pci_ops rt3883_pci_ops = { - .write = rt3883_pci_config_write, - }; - --static struct resource rt3883_pci_mem_resource = { -- .name = "PCI MEM space", -- .start = RT3883_PCI_MEM_BASE, -- .end = RT3883_PCI_MEM_BASE + RT3883_PCI_MEM_SIZE - 1, -- .flags = IORESOURCE_MEM, --}; -- --static struct resource rt3883_pci_io_resource = { -- .name = "PCI IO space", -- .start = RT3883_PCI_IO_BASE, -- .end = RT3883_PCI_IO_BASE + RT3883_PCI_IO_SIZE - 1, -- .flags = IORESOURCE_IO, --}; -- --static struct pci_controller rt3883_pci_controller = { -- .pci_ops = &rt3883_pci_ops, -- .mem_resource = &rt3883_pci_mem_resource, -- .io_resource = &rt3883_pci_io_resource, --}; -- --static void rt3883_pci_preinit(unsigned mode) ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static struct pci_ops rt3883_pci_ops = { ++ .read = rt3883_pci_config_read, ++ .write = rt3883_pci_config_write, ++}; ++ +static void rt3883_pci_preinit(struct rt3883_pci_controller *rpc, unsigned mode) - { - u32 syscfg1; - u32 rstctrl; - u32 clkcfg1; ++{ ++ u32 syscfg1; ++ u32 rstctrl; ++ u32 clkcfg1; + u32 t; + + rstctrl = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL); + syscfg1 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1); + clkcfg1 = rt_sysc_r32(RT3883_SYSC_REG_CLKCFG1); - - if (mode & RT3883_PCI_MODE_PCIE) { -- u32 val; ++ ++ if (mode & RT3883_PCI_MODE_PCIE) { + rstctrl |= RT3883_RSTCTRL_PCIE; + rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL); - -- val = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); -- val &= ~(0x30); -- val |= (2 << 4); -- rt3883_sysc_wr(val, RT3883_SYSC_REG_SYSCFG1); -- -- val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN0); -- val &= ~BIT(31); -- rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN0); -- -- val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN1); -- val &= 0x80ffffff; -- rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN1); -- -- val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN1); -- val |= 0xa << 24; -- rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN1); -- -- val = rt3883_sysc_rr(RT3883_SYSC_REG_PCIE_CLK_GEN0); -- val |= BIT(31); -- rt3883_sysc_wr(val, RT3883_SYSC_REG_PCIE_CLK_GEN0); ++ + /* setup PCI PAD drive mode */ + syscfg1 &= ~(0x30); + syscfg1 |= (2 << 4); @@ -474,67 +394,44 @@ + t = rt_sysc_r32(RT3883_SYSC_REG_PCIE_CLK_GEN0); + t |= BIT(31); + rt_sysc_w32(t, RT3883_SYSC_REG_PCIE_CLK_GEN0); - - msleep(50); ++ ++ msleep(50); + + rstctrl &= ~RT3883_RSTCTRL_PCIE; + rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL); - } - -- syscfg1 = rt3883_sysc_rr(RT3883_SYSC_REG_SYSCFG1); -- syscfg1 &= ~(RT3883_SYSCFG1_PCIE_RC_MODE | -- RT3883_SYSCFG1_PCI_HOST_MODE); -- -- rstctrl = rt3883_sysc_rr(RT3883_SYSC_REG_RSTCTRL); -- rstctrl |= (RT3883_RSTCTRL_PCI | RT3883_RSTCTRL_PCIE); -- -- clkcfg1 = rt3883_sysc_rr(RT3883_SYSC_REG_CLKCFG1); -- clkcfg1 &= ~(RT3883_CLKCFG1_PCI_CLK_EN | -- RT3883_CLKCFG1_PCIE_CLK_EN); ++ } ++ + syscfg1 |= (RT3883_SYSCFG1_PCIE_RC_MODE | RT3883_SYSCFG1_PCI_HOST_MODE); + + clkcfg1 &= ~(RT3883_CLKCFG1_PCI_CLK_EN | RT3883_CLKCFG1_PCIE_CLK_EN); - - if (mode & RT3883_PCI_MODE_PCI) { -- syscfg1 |= RT3883_SYSCFG1_PCI_HOST_MODE; - clkcfg1 |= RT3883_CLKCFG1_PCI_CLK_EN; - rstctrl &= ~RT3883_RSTCTRL_PCI; - } -+ - if (mode & RT3883_PCI_MODE_PCIE) { -- syscfg1 |= RT3883_SYSCFG1_PCI_HOST_MODE | -- RT3883_SYSCFG1_PCIE_RC_MODE; - clkcfg1 |= RT3883_CLKCFG1_PCIE_CLK_EN; - rstctrl &= ~RT3883_RSTCTRL_PCIE; - } - -- rt3883_sysc_wr(syscfg1, RT3883_SYSC_REG_SYSCFG1); -- rt3883_sysc_wr(rstctrl, RT3883_SYSC_REG_RSTCTRL); -- rt3883_sysc_wr(clkcfg1, RT3883_SYSC_REG_CLKCFG1); ++ ++ if (mode & RT3883_PCI_MODE_PCI) { ++ clkcfg1 |= RT3883_CLKCFG1_PCI_CLK_EN; ++ rstctrl &= ~RT3883_RSTCTRL_PCI; ++ } ++ ++ if (mode & RT3883_PCI_MODE_PCIE) { ++ clkcfg1 |= RT3883_CLKCFG1_PCIE_CLK_EN; ++ rstctrl &= ~RT3883_RSTCTRL_PCIE; ++ } ++ + rt_sysc_w32(syscfg1, RT3883_SYSC_REG_SYSCFG1); + rt_sysc_w32(rstctrl, RT3883_SYSC_REG_RSTCTRL); + rt_sysc_w32(clkcfg1, RT3883_SYSC_REG_CLKCFG1); - - msleep(500); --} - --static int rt3883_pcie_ready(void) --{ -- u32 status; ++ ++ msleep(500); ++ + /* + * setup the device number of the P2P bridge + * and de-assert the reset line + */ + t = (RT3883_P2P_BR_DEVNUM << RT3883_PCICFG_P2P_BR_DEVNUM_S); + rt3883_pci_w32(rpc, t, RT3883_PCI_REG_PCICFG); - ++ + /* flush write */ + rt3883_pci_r32(rpc, RT3883_PCI_REG_PCICFG); - msleep(500); - -- status = rt3883_pci_rr(RT3883_PCI_REG_STATUS(1)); -- if (status & BIT(0)) -- return 0; ++ msleep(500); ++ + if (mode & RT3883_PCI_MODE_PCIE) { + msleep(500); + @@ -564,8 +461,7 @@ + /* enable PCI arbiter */ + rt3883_pci_w32(rpc, 0x79, RT3883_PCI_REG_ARBCTL); +} - -- /* TODO: reset PCIe and turn off PCIe clock */ ++ +static inline void +rt3883_dump_pci_config(struct rt3883_pci_controller *rpc, + int bus, int slot) @@ -574,27 +470,24 @@ + + for (i = 0; i < 16; i++) { + u32 val; - -- return -ENODEV; ++ + val = rt3883_pci_read_cfg32(rpc, bus, slot, 0, i << 2); + pr_info("pci %02x:%02x.0 0x%02x = %08x\n", + bus, slot, i << 2, val); + } - } - --void __init rt3883_pci_init(unsigned mode) ++} ++ +static int rt3883_pci_probe(struct platform_device *pdev) - { ++{ + struct rt3883_pci_controller *rpc; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct resource *res; + struct device_node *child; - u32 val; - int err; ++ u32 val; ++ int err; + int mode; - -- rt3883_pci_preinit(mode); ++ + rpc = devm_kzalloc(dev, sizeof(*rpc), GFP_KERNEL); + if (!rpc) + return -ENOMEM; @@ -627,11 +520,7 @@ + of_node_full_name(child)); + continue; + } - -- rt3883_pci_base = ioremap(RT3883_PCI_BASE, PAGE_SIZE); -- if (rt3883_pci_base == NULL) { -- pr_err("failed to ioremap PCI registers\n"); -- return; ++ + switch (slot) { + case 1: + mode |= RT3883_PCI_MODE_PCIE; @@ -642,37 +531,24 @@ + mode |= RT3883_PCI_MODE_PCI; + break; + } - } - -- rt3883_pci_wr(0, RT3883_PCI_REG_PCICFG_ADDR); -- if (mode & RT3883_PCI_MODE_PCI) -- rt3883_pci_wr(BIT(16), RT3883_PCI_REG_PCICFG_ADDR); ++ } ++ + if (mode == RT3883_PCI_MODE_NONE) { + dev_err(dev, "unable to determine PCI mode\n"); + err = -EINVAL; + goto err_put_hb_node; + } - -- msleep(500); ++ + dev_info(dev, "mode:%s%s\n", + (mode & RT3883_PCI_MODE_PCI) ? " PCI" : "", + (mode & RT3883_PCI_MODE_PCIE) ? " PCIe" : ""); - -- if (mode & RT3883_PCI_MODE_PCIE) { -- err = rt3883_pcie_ready(); -- if (err) -- return; -- } ++ + rt3883_pci_preinit(rpc, mode); - -- if (mode & RT3883_PCI_MODE_PCI) -- rt3883_pci_wr(0x79, RT3883_PCI_REG_ARBCTL); ++ + rpc->pci_controller.pci_ops = &rt3883_pci_ops; + rpc->pci_controller.io_resource = &rpc->io_res; + rpc->pci_controller.mem_resource = &rpc->mem_res; - -- rt3883_pci_wr(RT3883_PCI_MEM_BASE, RT3883_PCI_REG_MEMBASE); -- rt3883_pci_wr(RT3883_PCI_IO_BASE, RT3883_PCI_REG_IOBASE); ++ + /* Load PCI I/O and memory resources from DT */ + pci_load_of_ranges(&rpc->pci_controller, + rpc->pci_controller.of_node); @@ -682,27 +558,15 @@ + + ioport_resource.start = rpc->io_res.start; + ioport_resource.end = rpc->io_res.end; - - /* PCI */ -- rt3883_pci_wr(0x03ff0000, RT3883_PCI_REG_BAR0SETUP_ADDR(0)); -- rt3883_pci_wr(RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0_ADDR(0)); -- rt3883_pci_wr(0x08021814, RT3883_PCI_REG_ID(0)); -- rt3883_pci_wr(0x00800001, RT3883_PCI_REG_CLASS(0)); -- rt3883_pci_wr(0x28801814, RT3883_PCI_REG_SUBID(0)); ++ ++ /* PCI */ + rt3883_pci_w32(rpc, 0x03ff0000, RT3883_PCI_REG_BAR0SETUP(0)); + rt3883_pci_w32(rpc, RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0(0)); + rt3883_pci_w32(rpc, 0x08021814, RT3883_PCI_REG_ID(0)); + rt3883_pci_w32(rpc, 0x00800001, RT3883_PCI_REG_CLASS(0)); + rt3883_pci_w32(rpc, 0x28801814, RT3883_PCI_REG_SUBID(0)); - - /* PCIe */ -- rt3883_pci_wr(0x01ff0000, RT3883_PCI_REG_BAR0SETUP_ADDR(1)); -- rt3883_pci_wr(RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0_ADDR(1)); -- rt3883_pci_wr(0x08021814, RT3883_PCI_REG_ID(1)); -- rt3883_pci_wr(0x06040001, RT3883_PCI_REG_CLASS(1)); -- rt3883_pci_wr(0x28801814, RT3883_PCI_REG_SUBID(1)); -- -- rt3883_pci_irq_init(); ++ ++ /* PCIe */ + rt3883_pci_w32(rpc, 0x03ff0000, RT3883_PCI_REG_BAR0SETUP(1)); + rt3883_pci_w32(rpc, RT3883_MEMORY_BASE, RT3883_PCI_REG_IMBASEBAR0(1)); + rt3883_pci_w32(rpc, 0x08021814, RT3883_PCI_REG_ID(1)); @@ -712,19 +576,13 @@ + err = rt3883_pci_irq_init(dev, rpc); + if (err) + goto err_put_hb_node; - - /* PCIe */ -- val = rt3883_pci_read_u32(0, 0x01, 0, PCI_COMMAND); -- val |= 0x7; -- rt3883_pci_write_u32(0, 0x01, 0, PCI_COMMAND, val); ++ ++ /* PCIe */ + val = rt3883_pci_read_cfg32(rpc, 0, 0x01, 0, PCI_COMMAND); + val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + rt3883_pci_write_cfg32(rpc, 0, 0x01, 0, PCI_COMMAND, val); - - /* PCI */ -- val = rt3883_pci_read_u32(0, 0x00, 0, PCI_COMMAND); -- val |= 0x7; -- rt3883_pci_write_u32(0, 0x00, 0, PCI_COMMAND, val); ++ ++ /* PCI */ + val = rt3883_pci_read_cfg32(rpc, 0, 0x00, 0, PCI_COMMAND); + val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + rt3883_pci_write_cfg32(rpc, 0, 0x00, 0, PCI_COMMAND, val); @@ -745,68 +603,29 @@ + } + + register_pci_controller(&rpc->pci_controller); - -- ioport_resource.start = rt3883_pci_io_resource.start; -- ioport_resource.end = rt3883_pci_io_resource.end; ++ + return 0; - -- register_pci_controller(&rt3883_pci_controller); ++ +err_put_hb_node: + of_node_put(rpc->pci_controller.of_node); + return err; - } - - int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) - { -- int irq = -1; -- -- switch (dev->bus->number) { -- case 0: -- switch (PCI_SLOT(dev->devfn)) { -- case 0x00: -- rt3883_pci_wr(0x03ff0001, -- RT3883_PCI_REG_BAR0SETUP_ADDR(0)); -- rt3883_pci_wr(0x03ff0001, -- RT3883_PCI_REG_BAR0SETUP_ADDR(1)); -- -- rt3883_pci_write_u32(0, 0x00, 0, PCI_BASE_ADDRESS_0, -- RT3883_MEMORY_BASE); -- rt3883_pci_read_u32(0, 0x00, 0, PCI_BASE_ADDRESS_0); -- -- irq = RT3883_CPU_IRQ_PCI; -- break; -- case 0x01: -- rt3883_pci_write_u32(0, 0x01, 0, PCI_IO_BASE, -- 0x00000101); -- break; -- case 0x11: -- irq = RT3883_PCI_IRQ_PCI0; -- break; -- case 0x12: -- irq = RT3883_PCI_IRQ_PCI1; -- break; -- } -- break; -- -- case 1: -- irq = RT3883_PCI_IRQ_PCIE; -- break; ++} ++ ++int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) ++{ + struct rt3883_pci_controller *rpc; + struct of_irq dev_irq; + int err; + int irq; - -- default: -- dev_err(&dev->dev, "no IRQ specified\n"); -- return irq; ++ + rpc = pci_bus_to_rt3883_controller(dev->bus); + err = of_irq_map_pci(dev, &dev_irq); + if (err) { + pr_err("pci %s: unable to get irq map, err=%d\n", + pci_name((struct pci_dev *) dev), err); + return 0; - } - ++ } ++ + irq = irq_create_of_mapping(dev_irq.controller, + dev_irq.specifier, + dev_irq.size); @@ -818,27 +637,20 @@ + pr_info("pci %s: using irq %d for pin %u\n", + pci_name((struct pci_dev *) dev), irq, pin); + - return irq; - } - --void __init rt3883_pci_set_plat_dev_init(int (*f)(struct pci_dev *dev)) ++ return irq; ++} ++ +int pcibios_plat_dev_init(struct pci_dev *dev) - { -- rt3883_pci_plat_dev_init = f; ++{ + return 0; - } - --int pcibios_plat_dev_init(struct pci_dev *dev) --{ -- if (rt3883_pci_plat_dev_init) -- return rt3883_pci_plat_dev_init(dev); ++} ++ +static const struct of_device_id rt3883_pci_ids[] = { + { .compatible = "ralink,rt3883-pci" }, + {}, +}; +MODULE_DEVICE_TABLE(of, rt3883_pci_ids); - -- return 0; ++ +static struct platform_driver rt3883_pci_driver = { + .probe = rt3883_pci_probe, + .driver = { @@ -851,6 +663,16 @@ +static int __init rt3883_pci_init(void) +{ + return platform_driver_register(&rt3883_pci_driver); - } ++} + +postcore_initcall(rt3883_pci_init); +--- a/arch/mips/ralink/Kconfig ++++ b/arch/mips/ralink/Kconfig +@@ -20,6 +20,7 @@ choice + bool "RT3883" + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI ++ select HW_HAS_PCI + + config SOC_MT7620 + bool "MT7620" diff --git a/target/linux/ramips/patches-3.8/0120-NET-MIPS-add-ralink-SoC-ethernet-driver.patch b/target/linux/ramips/patches-3.8/0136-NET-MIPS-add-ralink-SoC-ethernet-driver.patch similarity index 97% rename from target/linux/ramips/patches-3.8/0120-NET-MIPS-add-ralink-SoC-ethernet-driver.patch rename to target/linux/ramips/patches-3.8/0136-NET-MIPS-add-ralink-SoC-ethernet-driver.patch index b992650757..608f1fb87b 100644 --- a/target/linux/ramips/patches-3.8/0120-NET-MIPS-add-ralink-SoC-ethernet-driver.patch +++ b/target/linux/ramips/patches-3.8/0136-NET-MIPS-add-ralink-SoC-ethernet-driver.patch @@ -1,7 +1,7 @@ -From 1c31c288bc1e853e3226ba593a13a0492b39c9e8 Mon Sep 17 00:00:00 2001 +From 34fc7d26c01ba594be347aefcc31f55b36c06a72 Mon Sep 17 00:00:00 2001 From: John Crispin -Date: Fri, 15 Mar 2013 19:07:05 +0100 -Subject: [PATCH 120/121] NET: MIPS: add ralink SoC ethernet driver +Date: Mon, 22 Apr 2013 23:20:03 +0200 +Subject: [PATCH 136/137] NET: MIPS: add ralink SoC ethernet driver Add support for Ralink FE and ESW. @@ -14,10 +14,10 @@ Signed-off-by: John Crispin drivers/net/ethernet/ramips/Kconfig | 18 + drivers/net/ethernet/ramips/Makefile | 9 + drivers/net/ethernet/ramips/ramips_debugfs.c | 127 ++ - drivers/net/ethernet/ramips/ramips_esw.c | 1220 +++++++++++++++++++ + drivers/net/ethernet/ramips/ramips_esw.c | 1221 +++++++++++++++++++ drivers/net/ethernet/ramips/ramips_eth.h | 375 ++++++ - drivers/net/ethernet/ramips/ramips_main.c | 1285 ++++++++++++++++++++ - 10 files changed, 3064 insertions(+) + drivers/net/ethernet/ramips/ramips_main.c | 1281 ++++++++++++++++++++ + 10 files changed, 3061 insertions(+) create mode 100644 arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h create mode 100644 drivers/net/ethernet/ramips/Kconfig create mode 100644 drivers/net/ethernet/ramips/Makefile @@ -58,7 +58,7 @@ Signed-off-by: John Crispin +#endif /* _RT305X_ESW_PLATFORM_H */ --- a/arch/mips/ralink/rt305x.c +++ b/arch/mips/ralink/rt305x.c -@@ -182,6 +182,7 @@ void __init ralink_clk_init(void) +@@ -221,6 +221,7 @@ void __init ralink_clk_init(void) } ralink_clk_add("cpu", cpu_rate); @@ -1853,7 +1853,7 @@ Signed-off-by: John Crispin +#endif /* RAMIPS_ETH_H */ --- /dev/null +++ b/drivers/net/ethernet/ramips/ramips_main.c -@@ -0,0 +1,1285 @@ +@@ -0,0 +1,1281 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by @@ -1884,6 +1884,7 @@ Signed-off-by: John Crispin +#include +#include +#include ++#include + +#include "ramips_eth.h" + @@ -2262,12 +2263,25 @@ Signed-off-by: John Crispin +static int +ramips_mdio_init(struct raeth_priv *re) +{ ++ struct device_node *mii_np; + int err; -+ int i; ++ ++ mii_np = of_get_child_by_name(re->of_node, "mdio-bus"); ++ if (!mii_np) { ++ dev_err(re->parent, "no %s child node found", "mdio-bus"); ++ return -ENODEV; ++ } ++ ++ if (!of_device_is_available(mii_np)) { ++ err = 0; ++ goto err_put_node; ++ } + + re->mii_bus = mdiobus_alloc(); -+ if (re->mii_bus == NULL) -+ return -ENOMEM; ++ if (re->mii_bus == NULL) { ++ err = -ENOMEM; ++ goto err_put_node; ++ } + + re->mii_bus->name = "ramips_mdio"; + re->mii_bus->read = ramips_mdio_read; @@ -2278,12 +2292,7 @@ Signed-off-by: John Crispin + re->mii_bus->parent = re->parent; + + snprintf(re->mii_bus->id, MII_BUS_ID_SIZE, "%s", "ramips_mdio"); -+ re->mii_bus->phy_mask = 0; -+ -+ for (i = 0; i < PHY_MAX_ADDR; i++) -+ re->mii_irq[i] = PHY_POLL; -+ -+ err = mdiobus_register(re->mii_bus); ++ err = of_mdiobus_register(re->mii_bus, mii_np); + if (err) + goto err_free_bus; + @@ -2291,13 +2300,20 @@ Signed-off-by: John Crispin + +err_free_bus: + kfree(re->mii_bus); ++err_put_node: ++ of_node_put(mii_np); ++ re->mii_bus = NULL; + return err; +} + +static void +ramips_mdio_cleanup(struct raeth_priv *re) +{ ++ if (!re->mii_bus) ++ return; ++ + mdiobus_unregister(re->mii_bus); ++ of_node_put(re->mii_bus->dev.of_node); + kfree(re->mii_bus); +} + @@ -2330,106 +2346,86 @@ Signed-off-by: John Crispin +} + +static int -+ramips_phy_connect_multi(struct raeth_priv *re) ++ramips_phy_connect_by_node(struct raeth_priv *re, struct device_node *phy_node) +{ -+ struct net_device *netdev = re->netdev; -+ struct phy_device *phydev = NULL; -+ int phy_addr; -+ int ret = 0; -+ -+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { -+ if (!(re->phy_mask & (1 << phy_addr))) -+ continue; ++ struct phy_device *phydev; ++ int phy_mode; + -+ if (re->mii_bus->phy_map[phy_addr] == NULL) -+ continue; -+ -+ RADEBUG("%s: PHY found at %s, uid=%08x\n", -+ netdev->name, -+ dev_name(&re->mii_bus->phy_map[phy_addr]->dev), -+ re->mii_bus->phy_map[phy_addr]->phy_id); -+ -+ if (phydev == NULL) -+ phydev = re->mii_bus->phy_map[phy_addr]; -+ } -+ -+ if (!phydev) { -+ netdev_err(netdev, "no PHY found with phy_mask=%08x\n", -+ re->phy_mask); -+ return -ENODEV; ++ phy_mode = of_get_phy_mode(re->of_node); ++ if (phy_mode < 0) { ++ dev_err(re->parent, "incorrect phy-mode\n"); ++ return -EINVAL; + } + -+ re->phy_dev = phy_connect(netdev, dev_name(&phydev->dev), -+ ramips_phy_link_adjust, 0, re->phy_if_mode); -+ -+ if (IS_ERR(re->phy_dev)) { -+ netdev_err(netdev, "could not connect to PHY at %s\n", -+ dev_name(&phydev->dev)); ++ phydev = of_phy_connect(re->netdev, phy_node, ramips_phy_link_adjust, ++ 0, phy_mode); ++ if (IS_ERR(phydev)) { ++ dev_err(re->parent, "could not connect to PHY\n"); + return PTR_ERR(re->phy_dev); + } + + phydev->supported &= PHY_GBIT_FEATURES; + phydev->advertising = phydev->supported; + -+ RADEBUG("%s: connected to PHY at %s [uid=%08x, driver=%s]\n", -+ netdev->name, dev_name(&phydev->dev), -+ phydev->phy_id, phydev->drv->name); ++ dev_info(re->parent, ++ "connected to PHY at %s [uid=%08x, driver=%s]\n", ++ dev_name(&phydev->dev), phydev->phy_id, ++ phydev->drv->name); + ++ re->phy_dev = phydev; + re->link = 0; + re->speed = 0; + re->duplex = -1; + re->rx_fc = 0; + re->tx_fc = 0; + -+ return ret; ++ return 0; +} + +static int -+ramips_phy_connect_fixed(struct raeth_priv *re) ++ramips_phy_connect_fixed(struct raeth_priv *re, const __be32 *link, int size) +{ -+ if (!re->speed) { -+ const __be32 *link; -+ int size; -+ -+ link = of_get_property(re->of_node, -+ "ralink,fixed-link", &size); -+ if (!link || size != (4 * sizeof(*link))) -+ return -ENOENT; -+ -+ re->speed = be32_to_cpup(link++); -+ re->duplex = be32_to_cpup(link++); -+ re->tx_fc = be32_to_cpup(link++); -+ re->rx_fc = be32_to_cpup(link++); ++ if (size != (4 * sizeof(*link))) { ++ dev_err(re->parent, "invalid fixed-link property\n"); ++ return -EINVAL; + } + ++ re->speed = be32_to_cpup(link++); ++ re->duplex = be32_to_cpup(link++); ++ re->tx_fc = be32_to_cpup(link++); ++ re->rx_fc = be32_to_cpup(link++); ++ + switch (re->speed) { + case SPEED_10: + case SPEED_100: + case SPEED_1000: + break; + default: -+ netdev_err(re->netdev, "invalid speed specified\n"); ++ dev_err(re->parent, "invalid link speed: %d\n", re->speed); + return -EINVAL; + } + -+ pr_info("%s: using fixed link parameters\n", re->netdev->name); ++ dev_info(re->parent, "using fixed link parameters\n"); + return 0; +} + +static int +ramips_phy_connect(struct raeth_priv *re) +{ -+ const __be32 *mask; -+ -+ mask = of_get_property(re->of_node, "ralink,phy-mask", NULL); -+ re->phy_if_mode = of_get_phy_mode(re->of_node); ++ struct device_node *phy_node; ++ const __be32 *p32; ++ int size; + -+ if (!re->phy_if_mode || !mask) -+ return ramips_phy_connect_fixed(re); ++ phy_node = of_parse_phandle(re->of_node, "phy-handle", 0); ++ if (phy_node) ++ return ramips_phy_connect_by_node(re, phy_node); + -+ re->phy_mask = be32_to_cpup(mask); -+ return ramips_phy_connect_multi(re); ++ p32 = of_get_property(re->of_node, "ralink,fixed-link", &size); ++ if (p32) ++ return ramips_phy_connect_fixed(re, p32, size); + ++ dev_err(re->parent, "unable to get connection type\n"); ++ return -EINVAL; +} + +static void diff --git a/target/linux/ramips/patches-3.8/0121-watchdog-adds-ralink-wdt.patch b/target/linux/ramips/patches-3.8/0137-watchdog-adds-ralink-wdt.patch similarity index 98% rename from target/linux/ramips/patches-3.8/0121-watchdog-adds-ralink-wdt.patch rename to target/linux/ramips/patches-3.8/0137-watchdog-adds-ralink-wdt.patch index 7e2d9adea0..3b7246ffdb 100644 --- a/target/linux/ramips/patches-3.8/0121-watchdog-adds-ralink-wdt.patch +++ b/target/linux/ramips/patches-3.8/0137-watchdog-adds-ralink-wdt.patch @@ -1,7 +1,7 @@ -From 8dd2c6ae6d9c858d9c4c4d55aa4bf180669ddfe9 Mon Sep 17 00:00:00 2001 +From 14c1b064274d28cf88113a685c58374a515f3018 Mon Sep 17 00:00:00 2001 From: John Crispin -Date: Tue, 22 Jan 2013 18:23:50 +0100 -Subject: [PATCH 121/121] watchdog: adds ralink wdt +Date: Mon, 22 Apr 2013 23:23:07 +0200 +Subject: [PATCH 137/137] watchdog: adds ralink wdt Adds the watchdog driver for ralink SoC. diff --git a/target/linux/ramips/patches-3.8/0200-MIPS-read-the-mips_machine-name-from-OF-and-output-i.patch b/target/linux/ramips/patches-3.8/0200-MIPS-read-the-mips_machine-name-from-OF-and-output-i.patch deleted file mode 100644 index 21d9ee0a3c..0000000000 --- a/target/linux/ramips/patches-3.8/0200-MIPS-read-the-mips_machine-name-from-OF-and-output-i.patch +++ /dev/null @@ -1,98 +0,0 @@ -From 0184f7b64c68fe9606559e86bdd288de01c87a85 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 17 Mar 2013 10:30:48 +0100 -Subject: [PATCH 200/208] MIPS: read the mips_machine name from OF and output - it in /proc/cpuinfo - -This allows the userland to be compatible to the devive probing of mips_machine. - -Signed-off-by: John Crispin ---- - arch/mips/include/asm/prom.h | 3 +++ - arch/mips/kernel/proc.c | 6 +++++- - arch/mips/kernel/prom.c | 24 ++++++++++++++++++++++++ - 3 files changed, 32 insertions(+), 1 deletion(-) - ---- a/arch/mips/include/asm/prom.h -+++ b/arch/mips/include/asm/prom.h -@@ -44,8 +44,11 @@ extern void __dt_setup_arch(struct boot_ - __dt_setup_arch(&__dtb_##sym##_begin); \ - }) - -+extern char *of_mips_get_machine_name(void); -+ - #else /* CONFIG_OF */ - static inline void device_tree_init(void) { } -+static char *of_mips_get_machine_name(void) { return NULL; } - #endif /* CONFIG_OF */ - - #endif /* __ASM_PROM_H */ ---- a/arch/mips/kernel/proc.c -+++ b/arch/mips/kernel/proc.c -@@ -12,6 +12,7 @@ - #include - #include - #include -+#include - #include - - unsigned int vced_count, vcei_count; -@@ -34,7 +35,10 @@ static int show_cpuinfo(struct seq_file - */ - if (n == 0) { - seq_printf(m, "system type\t\t: %s\n", get_system_type()); -- if (mips_get_machine_name()) -+ if (of_mips_get_machine_name()) -+ seq_printf(m, "machine\t\t\t: %s\n", -+ of_mips_get_machine_name()); -+ else if (mips_get_machine_name()) - seq_printf(m, "machine\t\t\t: %s\n", - mips_get_machine_name()); - } ---- a/arch/mips/kernel/prom.c -+++ b/arch/mips/kernel/prom.c -@@ -23,6 +23,13 @@ - #include - #include - -+static char of_mips_machine_name[64] = "Unknown"; -+ -+char *of_mips_get_machine_name(void) -+{ -+ return of_mips_machine_name; -+} -+ - int __init early_init_dt_scan_memory_arch(unsigned long node, - const char *uname, int depth, - void *data) -@@ -50,6 +57,20 @@ void __init early_init_dt_setup_initrd_a - } - #endif - -+int __init early_init_dt_scan_model(unsigned long node, -+ const char *uname, int depth, -+ void *data) -+{ -+ if (!depth) { -+ char *model = of_get_flat_dt_prop(node, "model", NULL); -+ if (model) { -+ snprintf(of_mips_machine_name, sizeof(of_mips_machine_name), model); -+ pr_info("MIPS: machine is %s\n", of_mips_machine_name); -+ } -+ } -+ return 0; -+} -+ - void __init early_init_devtree(void *params) - { - /* Setup flat device-tree pointer */ -@@ -65,6 +86,9 @@ void __init early_init_devtree(void *par - /* Scan memory nodes */ - of_scan_flat_dt(early_init_dt_scan_root, NULL); - of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL); -+ -+ /* try to load the mips machine name */ -+ of_scan_flat_dt(early_init_dt_scan_model, NULL); - } - - void __init __dt_setup_arch(struct boot_param_header *bph) diff --git a/target/linux/ramips/patches-3.8/0204-owrt-MIPS-ralink-add-usb-platform-support.patch b/target/linux/ramips/patches-3.8/0204-owrt-MIPS-ralink-add-usb-platform-support.patch index 0b5b443600..88514008a7 100644 --- a/target/linux/ramips/patches-3.8/0204-owrt-MIPS-ralink-add-usb-platform-support.patch +++ b/target/linux/ramips/patches-3.8/0204-owrt-MIPS-ralink-add-usb-platform-support.patch @@ -34,7 +34,7 @@ Signed-off-by: John Crispin obj-$(CONFIG_EARLY_PRINTK) += early_printk.o --- a/arch/mips/ralink/common.h +++ b/arch/mips/ralink/common.h -@@ -46,5 +46,6 @@ extern void prom_soc_init(struct ralink_ +@@ -51,5 +51,6 @@ extern void prom_soc_init(struct ralink_ __iomem void *plat_of_remap_node(const char *node); void ralink_pinmux(void); @@ -43,8 +43,8 @@ Signed-off-by: John Crispin #endif /* _RALINK_COMMON_H__ */ --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c -@@ -146,6 +146,11 @@ struct ralink_pinmux rt_pinmux = { - // .wdt_reset = rt305x_wdt_reset, +@@ -140,6 +140,11 @@ struct ralink_pinmux rt_gpio_pinmux = { + .uart_mask = MT7620_GPIO_MODE_GPIO, }; +void ralink_usb_platform(void) @@ -57,7 +57,7 @@ Signed-off-by: John Crispin unsigned long cpu_rate, sys_rate; --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c -@@ -102,6 +102,7 @@ static int __init plat_of_setup(void) +@@ -111,6 +111,7 @@ static int __init plat_of_setup(void) panic("failed to populate DT\n"); ralink_pinmux(); diff --git a/target/linux/ramips/patches-3.8/0205-owrt-MIPS-add-OWRTDTB-secion.patch b/target/linux/ramips/patches-3.8/0205-owrt-MIPS-add-OWRTDTB-secion.patch index f443468e3f..b1e8058c7b 100644 --- a/target/linux/ramips/patches-3.8/0205-owrt-MIPS-add-OWRTDTB-secion.patch +++ b/target/linux/ramips/patches-3.8/0205-owrt-MIPS-add-OWRTDTB-secion.patch @@ -32,7 +32,7 @@ Signed-off-by: John Crispin +#obj-y += dts/ --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c -@@ -76,6 +76,8 @@ void __init device_tree_init(void) +@@ -77,6 +77,8 @@ void __init device_tree_init(void) free_bootmem(base, size); } @@ -41,12 +41,12 @@ Signed-off-by: John Crispin void __init plat_mem_setup(void) { set_io_port_base(KSEG1); -@@ -84,7 +86,7 @@ void __init plat_mem_setup(void) +@@ -85,7 +87,7 @@ void __init plat_mem_setup(void) * Load the builtin devicetree. This causes the chosen node to be * parsed resulting in our memory appearing */ - __dt_setup_arch(&__dtb_start); + __dt_setup_arch(&__image_dtb); - } - static int __init plat_of_setup(void) + if (soc_info.mem_size) + add_memory_region(soc_info.mem_base, soc_info.mem_size, diff --git a/target/linux/ramips/patches-3.8/0207-owrt-MIPS-ralink-add-support-for-runtime-memory-dete.patch b/target/linux/ramips/patches-3.8/0207-owrt-MIPS-ralink-add-support-for-runtime-memory-dete.patch deleted file mode 100644 index 51e233a12c..0000000000 --- a/target/linux/ramips/patches-3.8/0207-owrt-MIPS-ralink-add-support-for-runtime-memory-dete.patch +++ /dev/null @@ -1,176 +0,0 @@ -From bcd97dbdcb7bc0300397db481872252e8849307b Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 25 Mar 2013 10:50:53 +0100 -Subject: [PATCH 207/208] owrt: MIPS: ralink: add support for runtime memory - detection - -This allows us to add a device_node called "memorydetect" to the DT with -information about the memory windoe of the SoC. Based on this the memory is -detected ar runtime. - -Signed-off-by: John Crispin ---- - arch/mips/include/asm/prom.h | 3 ++ - arch/mips/kernel/prom.c | 3 ++ - arch/mips/ralink/Makefile | 2 +- - arch/mips/ralink/memory.c | 119 ++++++++++++++++++++++++++++++++++++++++++ - 4 files changed, 126 insertions(+), 1 deletion(-) - create mode 100644 arch/mips/ralink/memory.c - ---- a/arch/mips/include/asm/prom.h -+++ b/arch/mips/include/asm/prom.h -@@ -20,6 +20,9 @@ - extern int early_init_dt_scan_memory_arch(unsigned long node, - const char *uname, int depth, void *data); - -+extern int early_init_dt_detect_memory(unsigned long node, -+ const char *uname, int depth, void *data); -+ - extern void device_tree_init(void); - - static inline unsigned long pci_address_to_pio(phys_addr_t address) ---- a/arch/mips/kernel/prom.c -+++ b/arch/mips/kernel/prom.c -@@ -88,6 +88,9 @@ void __init early_init_devtree(void *par - of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL); - - /* try to load the mips machine name */ -+ of_scan_flat_dt(early_init_dt_detect_memory, NULL); -+ -+ /* try to load the mips machine name */ - of_scan_flat_dt(early_init_dt_scan_model, NULL); - } - ---- a/arch/mips/ralink/Makefile -+++ b/arch/mips/ralink/Makefile -@@ -6,7 +6,7 @@ - # Copyright (C) 2009-2011 Gabor Juhos - # Copyright (C) 2013 John Crispin - --obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o timer.o -+obj-y := prom.o of.o reset.o clk.o irq.o pinmux.o timer.o memory.o - - obj-$(CONFIG_SOC_RT288X) += rt288x.o - obj-$(CONFIG_SOC_RT305X) += rt305x.o rt305x-usb.o ---- /dev/null -+++ b/arch/mips/ralink/memory.c -@@ -0,0 +1,119 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2009 Gabor Juhos -+ * Copyright (C) 2013 John Crispin -+ */ -+ -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include "common.h" -+ -+#define MB (1024 * 1024) -+ -+unsigned long ramips_mem_base; -+unsigned long ramips_mem_size_min; -+unsigned long ramips_mem_size_max; -+ -+#ifdef CONFIG_SOC_RT305X -+ -+#include -+ -+static unsigned long rt5350_get_mem_size(void) -+{ -+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); -+ unsigned long ret; -+ u32 t; -+ -+ t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG); -+ t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) & -+ RT5350_SYSCFG0_DRAM_SIZE_MASK; -+ -+ switch (t) { -+ case RT5350_SYSCFG0_DRAM_SIZE_2M: -+ ret = 2 * 1024 * 1024; -+ break; -+ case RT5350_SYSCFG0_DRAM_SIZE_8M: -+ ret = 8 * 1024 * 1024; -+ break; -+ case RT5350_SYSCFG0_DRAM_SIZE_16M: -+ ret = 16 * 1024 * 1024; -+ break; -+ case RT5350_SYSCFG0_DRAM_SIZE_32M: -+ ret = 32 * 1024 * 1024; -+ break; -+ case RT5350_SYSCFG0_DRAM_SIZE_64M: -+ ret = 64 * 1024 * 1024; -+ break; -+ default: -+ panic("rt5350: invalid DRAM size: %u", t); -+ break; -+ } -+ -+ return ret; -+} -+ -+#endif -+ -+static void __init detect_mem_size(void) -+{ -+ unsigned long size; -+ -+#ifdef CONFIG_SOC_RT305X -+ if (soc_is_rt5350()) { -+ size = rt5350_get_mem_size(); -+ } else -+#endif -+ { -+ void *base; -+ -+ base = (void *) KSEG1ADDR(detect_mem_size); -+ for (size = ramips_mem_size_min; size < ramips_mem_size_max; -+ size <<= 1 ) { -+ if (!memcmp(base, base + size, 1024)) -+ break; -+ } -+ } -+ -+ pr_info("memory detected: %uMB\n", (unsigned int) size / MB); -+ -+ add_memory_region(ramips_mem_base, size, BOOT_MEM_RAM); -+} -+ -+int __init early_init_dt_detect_memory(unsigned long node, const char *uname, -+ int depth, void *data) -+{ -+ unsigned long l; -+ __be32 *mem; -+ -+ /* We are scanning "memorydetect" nodes only */ -+ if (depth != 1 || strcmp(uname, "memorydetect") != 0) -+ return 0; -+ -+ mem = of_get_flat_dt_prop(node, "ralink,memory", &l); -+ if (mem == NULL) -+ return 0; -+ -+ if ((l / sizeof(__be32)) != 3) -+ panic("invalid memorydetect node\n"); -+ -+ ramips_mem_base = dt_mem_next_cell(dt_root_addr_cells, &mem); -+ ramips_mem_size_min = dt_mem_next_cell(dt_root_size_cells, &mem); -+ ramips_mem_size_max = dt_mem_next_cell(dt_root_size_cells, &mem); -+ -+ pr_info("memory window: 0x%llx, min: %uMB, max: %uMB\n", -+ (unsigned long long) ramips_mem_base, -+ (unsigned int) ramips_mem_size_min / MB, -+ (unsigned int) ramips_mem_size_max / MB); -+ -+ detect_mem_size(); -+ -+ return 0; -+} diff --git a/target/linux/ramips/patches-3.8/0212-MIPS-ralink-add-GPIO-mode-to-RT305x-UART-pinmux-grou.patch b/target/linux/ramips/patches-3.8/0212-MIPS-ralink-add-GPIO-mode-to-RT305x-UART-pinmux-grou.patch deleted file mode 100644 index 81c655d110..0000000000 --- a/target/linux/ramips/patches-3.8/0212-MIPS-ralink-add-GPIO-mode-to-RT305x-UART-pinmux-grou.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/arch/mips/ralink/rt305x.c -+++ b/arch/mips/ralink/rt305x.c -@@ -97,6 +97,11 @@ struct ralink_pinmux_grp uart_mux[] = { - .mask = RT305X_GPIO_MODE_GPIO_I2S, - .gpio_first = RT305X_GPIO_7, - .gpio_last = RT305X_GPIO_14, -+ }, { -+ .name = "gpio", -+ .mask = RT305X_GPIO_MODE_GPIO, -+ .gpio_first = RT305X_GPIO_7, -+ .gpio_last = RT305X_GPIO_14, - }, {0} - }; - -- 2.11.0