From 9eb2dd5bb4be0bbbb47be056dce9aed88da16ed9 Mon Sep 17 00:00:00 2001 From: blogic Date: Thu, 1 Aug 2013 14:30:58 +0000 Subject: [PATCH] ramips: add Poray M4 4M/8M support Signed-off-by: Felix Kaechele git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37637 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ramips/base-files/etc/diag.sh | 3 + .../ramips/base-files/etc/uci-defaults/02_network | 3 +- .../ramips/base-files/lib/preinit/06_set_iface_mac | 3 +- target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/M4-4M.dts | 99 ++++++++++++++++++++++ target/linux/ramips/dts/M4-8M.dts | 99 ++++++++++++++++++++++ target/linux/ramips/image/Makefile | 3 + target/linux/ramips/rt305x/profiles/poray.mk | 10 +++ 9 files changed, 222 insertions(+), 2 deletions(-) create mode 100644 target/linux/ramips/dts/M4-4M.dts create mode 100644 target/linux/ramips/dts/M4-8M.dts diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index a68538b2f7..57c8beb6c2 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -55,6 +55,9 @@ get_status_led() { m3) status_led="m3:blue:status" ;; + m4) + status_led="m4:blue:status" + ;; mofi3500-3gn) status_led="mofi3500-3gn:green:status" ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index 307330b063..133c2decb9 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -226,7 +226,8 @@ ramips_setup_macs() wan_mac=$(macaddr_add "$lan_mac" 1) ;; - m3) + m3 |\ + m4) lan_mac=$(mtd_get_mac_binary factory 4) lan_mac=$(macaddr_add "$lan_mac" -1) ;; diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index 86c19b0b81..f9aabd5c4e 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -75,7 +75,8 @@ preinit_set_mac_address() { mac=$(mtd_get_mac_binary factory 40) ifconfig eth0 hw ether $mac 2>/dev/null ;; - m3) + m3 |\ + m4) mac=$(mtd_get_mac_binary factory 4) mac=$(macaddr_add "$mac" -1) ifconfig eth0 hw ether $mac 2>/dev/null diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 7afa707363..e3776f1304 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -151,6 +151,9 @@ ramips_board_detect() { *"Poray M3") name="m3" ;; + *"Poray M4") + name="m4" + ;; *"PWH2004") name="pwh2004" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 4ac86e97e0..5e1a7a5651 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -45,6 +45,7 @@ platform_check_image() { hw550-3g | \ hg255d | \ m3 | \ + m4 | \ mofi3500-3gn | \ mpr-a1 | \ mpr-a2 | \ diff --git a/target/linux/ramips/dts/M4-4M.dts b/target/linux/ramips/dts/M4-4M.dts new file mode 100644 index 0000000000..86bd8327c1 --- /dev/null +++ b/target/linux/ramips/dts/M4-4M.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "M4", "ralink,rt5350-soc"; + model = "Poray M4"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "pm25lq032"; + reg = <0 0>; + linux,modalias = "m25p80", "pm25lq032"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + ralink,led_polarity = <1>; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "m4:blue:status"; + gpios = <&gpio0 9 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + ralink,mtd-eeprom = <&factory 0>; + ralink,led-polarity = <1>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/M4-8M.dts b/target/linux/ramips/dts/M4-8M.dts new file mode 100644 index 0000000000..d07eb4978a --- /dev/null +++ b/target/linux/ramips/dts/M4-8M.dts @@ -0,0 +1,99 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "M4", "ralink,rt5350-soc"; + model = "Poray M4"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "gd25q64"; + reg = <0 0>; + linux,modalias = "m25p80", "gd25q64"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + ralink,led_polarity = <1>; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "m4:blue:status"; + gpios = <&gpio0 9 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + ralink,mtd-eeprom = <&factory 0>; + ralink,led-polarity = <1>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index b626bec7c4..68343e3fdd 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -376,6 +376,8 @@ Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freest Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3) +Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4) + Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN) # Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI @@ -511,6 +513,7 @@ define Image/Build/Profile/Default # $(call Image/Build/Profile/HG255D,$(1)) $(call Image/Build/Profile/HW550-3G,$(1)) $(call Image/Build/Profile/M3,$(1)) + $(call Image/Build/Profile/M4,$(1)) $(call Image/Build/Profile/MOFI3500-3GN,$(1)) $(call Image/Build/Profile/MPRA2,$(1)) $(call Image/Build/Profile/MZKW300NH2,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/poray.mk b/target/linux/ramips/rt305x/profiles/poray.mk index 972d7fdbd6..10cf37f381 100644 --- a/target/linux/ramips/rt305x/profiles/poray.mk +++ b/target/linux/ramips/rt305x/profiles/poray.mk @@ -15,3 +15,13 @@ define Profile/M3/Description endef $(eval $(call Profile,M3)) + +define Profile/M4 + NAME:=Poray M4 + PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-netdev kmod-ledtrig-timer +endef +define Profile/M4/Description + Package set for Poray M4 board +endef + +$(eval $(call Profile,M4)) -- 2.11.0