From 9cd3628d4617f1fe88d8a8bfdb266afd638fdae3 Mon Sep 17 00:00:00 2001 From: juhosg Date: Tue, 18 Dec 2012 20:10:37 +0000 Subject: [PATCH] ppc40x: nuke 3.3 support Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34776 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/ppc40x/config-3.3 | 218 ---------- .../003-powerpc-add-EBC_BXCR-defines.patch | 27 -- target/linux/ppc40x/patches-3.3/004-magicbox.patch | 445 -------------------- target/linux/ppc40x/patches-3.3/005-openrb.patch | 447 --------------------- .../patches-3.3/101-pata-magicbox-cf-driver.patch | 433 -------------------- .../patches-3.3/110-kilauea_openwrt_flashmap.patch | 55 --- .../120-usb-isp116x-hcd-add-of-binding.patch | 289 ------------- ...21-usb-isp116x-hcd-ppc405-register-access.patch | 111 ----- 8 files changed, 2025 deletions(-) delete mode 100644 target/linux/ppc40x/config-3.3 delete mode 100644 target/linux/ppc40x/patches-3.3/003-powerpc-add-EBC_BXCR-defines.patch delete mode 100644 target/linux/ppc40x/patches-3.3/004-magicbox.patch delete mode 100644 target/linux/ppc40x/patches-3.3/005-openrb.patch delete mode 100644 target/linux/ppc40x/patches-3.3/101-pata-magicbox-cf-driver.patch delete mode 100644 target/linux/ppc40x/patches-3.3/110-kilauea_openwrt_flashmap.patch delete mode 100644 target/linux/ppc40x/patches-3.3/120-usb-isp116x-hcd-add-of-binding.patch delete mode 100644 target/linux/ppc40x/patches-3.3/121-usb-isp116x-hcd-ppc405-register-access.patch diff --git a/target/linux/ppc40x/config-3.3 b/target/linux/ppc40x/config-3.3 deleted file mode 100644 index 890370ecb9..0000000000 --- a/target/linux/ppc40x/config-3.3 +++ /dev/null @@ -1,218 +0,0 @@ -CONFIG_405EP=y -CONFIG_405EX=y -CONFIG_40x=y -# CONFIG_44x is not set -CONFIG_4xx=y -CONFIG_4xx_SOC=y -# CONFIG_ACADIA is not set -# CONFIG_ADVANCED_OPTIONS is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_ARCH_SUPPORTS_MSI=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_AUDIT_ARCH=y -CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=3 -CONFIG_BOUNCE=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd" -CONFIG_CMDLINE_BOOL=y -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_DECOMPRESS_LZMA=y -# CONFIG_DEFAULT_UIMAGE is not set -CONFIG_DTC=y -# CONFIG_E200 is not set -CONFIG_EARLY_PRINTK=y -# CONFIG_EP405 is not set -# CONFIG_EPAPR_BOOT is not set -CONFIG_EXTRA_TARGETS="uImage" -# CONFIG_FSL_ULI1575 is not set -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_NVRAM=y -CONFIG_GENERIC_PCI_IOMAP=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_GENERIC_TIME_VSYSCALL=y -# CONFIG_GEN_RTC is not set -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HAS_RAPIDIO is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_IRQ_WORK=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_HAVE_SPARSE_IRQ=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -# CONFIG_HOTFOOT is not set -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -CONFIG_IBM_EMAC=y -CONFIG_IBM_EMAC_EMAC4=y -CONFIG_IBM_EMAC_POLL_WEIGHT=32 -CONFIG_IBM_EMAC_RGMII=y -CONFIG_IBM_EMAC_RXB=256 -CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256 -CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0 -CONFIG_IBM_EMAC_TXB=256 -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IOMMU_HELPER=y -# CONFIG_IPIC is not set -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_ISA_DMA_API=y -CONFIG_KERNEL_START=0xc0000000 -CONFIG_KILAUEA=y -CONFIG_LEDS_GPIO=m -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_MAGICBOX=y -# CONFIG_MAKALU is not set -# CONFIG_MATH_EMULATION is not set -CONFIG_MAX_ACTIVE_REGIONS=32 -# CONFIG_MMIO_NVRAM is not set -# CONFIG_MPIC is not set -# CONFIG_MPIC_U3_HT_IRQS is not set -# CONFIG_MPIC_WEIRD is not set -CONFIG_MTD_CFI_ADV_OPTIONS=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_OF_PARTS=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_NEED_DMA_MAP_STATE=y -# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_NLS=m -# CONFIG_NONSTATIC_KERNEL is not set -CONFIG_NOT_COHERENT_CACHE=y -CONFIG_NR_IRQS=512 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_DEVICE=y -CONFIG_OF_DYNAMIC=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OPENRB=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_MSI=y -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_PPC40x_SIMPLE=y -CONFIG_PPC4xx_MSI=y -CONFIG_PPC4xx_PCI_EXPRESS=y -# CONFIG_PPC64 is not set -# CONFIG_PPC_85xx is not set -# CONFIG_PPC_8xx is not set -# CONFIG_PPC_970_NAP is not set -CONFIG_PPC_ADV_DEBUG_DACS=2 -CONFIG_PPC_ADV_DEBUG_DVCS=0 -CONFIG_PPC_ADV_DEBUG_IACS=2 -CONFIG_PPC_ADV_DEBUG_REGS=y -# CONFIG_PPC_BOOK3S_32 is not set -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PPC_CLOCK is not set -CONFIG_PPC_DCR=y -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_PPC_DCR_NATIVE=y -# CONFIG_PPC_EARLY_DEBUG is not set -# CONFIG_PPC_EPAPR_HV_PIC is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_ICP_HV is not set -# CONFIG_PPC_ICP_NATIVE is not set -# CONFIG_PPC_ICS_RTAS is not set -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_PPC_MPC106 is not set -CONFIG_PPC_MSI_BITMAP=y -CONFIG_PPC_OF=y -# CONFIG_PPC_P7_NAP is not set -CONFIG_PPC_PCI_CHOICE=y -# CONFIG_PPC_RTAS is not set -CONFIG_PPC_UDBG_16550=y -CONFIG_PPC_WERROR=y -# CONFIG_PPC_WSP is not set -# CONFIG_PPC_XICS is not set -# CONFIG_PQ2ADS is not set -# CONFIG_PREEMPT_RCU is not set -CONFIG_PROC_DEVICETREE=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SCHED_HRTICK=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_FSL=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -# CONFIG_SERIAL_8250_RSA is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -CONFIG_SWIOTLB=y -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_USB=m -CONFIG_USB_ARCH_HAS_XHCI=y -CONFIG_USB_COMMON=m -# CONFIG_USB_EHCI_HCD is not set -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_OHCI_HCD_PCI=y -# CONFIG_USB_OHCI_HCD_PLATFORM is not set -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_SUPPORT=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_WALNUT is not set -CONFIG_WORD_SIZE=32 -# CONFIG_XILINX_SYSACE is not set -# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set diff --git a/target/linux/ppc40x/patches-3.3/003-powerpc-add-EBC_BXCR-defines.patch b/target/linux/ppc40x/patches-3.3/003-powerpc-add-EBC_BXCR-defines.patch deleted file mode 100644 index 660b8bcd49..0000000000 --- a/target/linux/ppc40x/patches-3.3/003-powerpc-add-EBC_BXCR-defines.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/arch/powerpc/boot/dcr.h -+++ b/arch/powerpc/boot/dcr.h -@@ -55,6 +55,14 @@ static const unsigned long sdram_bxcr[] - #define EBC_BXCR(n) (n) - #define EBC_BXCR_BAS 0xfff00000 - #define EBC_BXCR_BS 0x000e0000 -+#define EBC_BXCR_BS_1M 0x00000000 -+#define EBC_BXCR_BS_2M 0x00020000 -+#define EBC_BXCR_BS_4M 0x00040000 -+#define EBC_BXCR_BS_8M 0x00060000 -+#define EBC_BXCR_BS_16M 0x00080000 -+#define EBC_BXCR_BS_32M 0x000a0000 -+#define EBC_BXCR_BS_64M 0x000c0000 -+#define EBC_BXCR_BS_128M 0x000e0000 - #define EBC_BXCR_BANK_SIZE(reg) \ - (0x100000 << (((reg) & EBC_BXCR_BS) >> 17)) - #define EBC_BXCR_BU 0x00018000 -@@ -63,6 +71,9 @@ static const unsigned long sdram_bxcr[] - #define EBC_BXCR_BU_WO 0x00010000 - #define EBC_BXCR_BU_RW 0x00018000 - #define EBC_BXCR_BW 0x00006000 -+#define EBC_BXCR_BW_8 0x00000000 -+#define EBC_BXCR_BW_16 0x00002000 -+#define EBC_BXCR_BW_32 0x00006000 - #define EBC_B0AP 0x10 - #define EBC_B1AP 0x11 - #define EBC_B2AP 0x12 diff --git a/target/linux/ppc40x/patches-3.3/004-magicbox.patch b/target/linux/ppc40x/patches-3.3/004-magicbox.patch deleted file mode 100644 index 0dade8136d..0000000000 --- a/target/linux/ppc40x/patches-3.3/004-magicbox.patch +++ /dev/null @@ -1,445 +0,0 @@ ---- /dev/null -+++ b/arch/powerpc/boot/cuboot-magicbox.c -@@ -0,0 +1,98 @@ -+/* -+ * Old U-boot compatibility for Magicbox boards -+ * -+ * Author: Imre Kaloz -+ * Gabor Juhos -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include "ops.h" -+#include "io.h" -+#include "dcr.h" -+#include "stdio.h" -+#include "4xx.h" -+#include "44x.h" -+#include "cuboot.h" -+ -+#define TARGET_4xx -+#define TARGET_405EP -+#include "ppcboot.h" -+ -+static bd_t bd; -+ -+static void fixup_perwe(void) -+{ -+ -+#define DCRN_CPC0_PCI_BASE 0xf9 -+ -+ /* Turn on PerWE instead of PCIINT */ -+ mtdcr(DCRN_CPC0_PCI_BASE, -+ mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27)); -+ -+#undef DCRN_CPC0_PCI_BASE -+} -+ -+static void fixup_cf_card(void) -+{ -+ -+#define CF_CS0_BASE 0xff100000 -+#define CF_CS1_BASE 0xff200000 -+ -+ /* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */ -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1CR); -+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS0_BASE | EBC_BXCR_BS_1M | -+ EBC_BXCR_BU_RW | EBC_BXCR_BW_16); -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1AP); -+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800); -+ -+ /* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */ -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2CR); -+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS1_BASE | EBC_BXCR_BS_1M | -+ EBC_BXCR_BU_RW | EBC_BXCR_BW_16); -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2AP); -+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800); -+ -+#undef CF_CS0_BASE -+#undef CF_CS1_BASE -+} -+ -+static void magicbox_fixups(void) -+{ -+ ibm405ep_fixup_clocks(bd.bi_procfreq / 8); -+ ibm4xx_sdram_fixup_memsize(); -+ -+ /* Magicbox v1 has only one ethernet, one serial and no -+ * CF slot -- detect it using it's fake enet1addr -+ */ -+ if ((bd.bi_enet1addr[2] == 0x02) && -+ (bd.bi_enet1addr[3] == 0xfa) && -+ (bd.bi_enet1addr[4] == 0xf0) && -+ (bd.bi_enet1addr[5] == 0x80)) { -+ void *devp; -+ devp = finddevice("/plb/opb/ethernet@ef600900"); -+ del_node(devp); -+ devp = finddevice("/plb/opb/serial@ef600400"); -+ del_node(devp); -+ devp = finddevice("/plb/ebc/cf_card@ff100000"); -+ del_node(devp); -+ -+ } else { -+ fixup_perwe(); -+ fixup_cf_card(); -+ } -+ -+ dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); -+} -+ -+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, -+ unsigned long r6, unsigned long r7) -+{ -+ CUBOOT_INIT(); -+ platform_ops.fixups = magicbox_fixups; -+ platform_ops.exit = ibm40x_dbcr_reset; -+ fdt_init(_dtb_start); -+ serial_console_init(); -+} ---- /dev/null -+++ b/arch/powerpc/boot/dts/magicbox.dts -@@ -0,0 +1,285 @@ -+/* -+ * Device Tree Source for Magicbox boards -+ * -+ * Copyright 2008-2009 Imre Kaloz -+ * Copyright 2009 Gabor Juhos -+ * -+ * Based on walnut.dts -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ */ -+ -+/dts-v1/; -+ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ model = "magicbox"; -+ compatible = "magicbox"; -+ dcr-parent = <&{/cpus/cpu@0}>; -+ -+ aliases { -+ ethernet0 = &EMAC0; -+ ethernet1 = &EMAC1; -+ serial0 = &UART0; -+ serial1 = &UART1; -+ }; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu@0 { -+ device_type = "cpu"; -+ model = "PowerPC,405EP"; -+ reg = <0x00000000>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ timebase-frequency = <0>; /* Filled in by zImage */ -+ i-cache-line-size = <0x20>; -+ d-cache-line-size = <0x20>; -+ i-cache-size = <0x4000>; -+ d-cache-size = <0x4000>; -+ dcr-controller; -+ dcr-access-method = "native"; -+ }; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */ -+ }; -+ -+ UIC0: interrupt-controller { -+ compatible = "ibm,uic"; -+ interrupt-controller; -+ cell-index = <0>; -+ dcr-reg = <0x0c0 0x009>; -+ #address-cells = <0>; -+ #size-cells = <0>; -+ #interrupt-cells = <2>; -+ }; -+ -+ plb { -+ compatible = "ibm,plb3"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ SDRAM0: memory-controller { -+ compatible = "ibm,sdram-405ep"; -+ dcr-reg = <0x010 0x002>; -+ }; -+ -+ MAL: mcmal { -+ compatible = "ibm,mcmal-405ep", "ibm,mcmal"; -+ dcr-reg = <0x180 0x062>; -+ num-tx-chans = <4>; -+ num-rx-chans = <2>; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0xb 0x4 /* TXEOB */ -+ 0xc 0x4 /* RXEOB */ -+ 0xa 0x4 /* SERR */ -+ 0xd 0x4 /* TXDE */ -+ 0xe 0x4 /* RXDE */>; -+ }; -+ -+ POB0: opb { -+ compatible = "ibm,opb-405ep", "ibm,opb"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0xef600000 0xef600000 0x00a00000>; -+ dcr-reg = <0x0a0 0x005>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ UART0: serial@ef600300 { -+ device_type = "serial"; -+ compatible = "ns16550"; -+ reg = <0xef600300 0x00000008>; -+ virtual-reg = <0xef600300>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ current-speed = <115200>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x0 0x4>; -+ }; -+ -+ UART1: serial@ef600400 { -+ device_type = "serial"; -+ compatible = "ns16550"; -+ reg = <0xef600400 0x00000008>; -+ virtual-reg = <0xef600400>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ current-speed = <115200>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x1 0x4>; -+ }; -+ -+ IIC: i2c@ef600500 { -+ compatible = "ibm,iic-405ep", "ibm,iic"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0xef600500 0x00000011>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x2 0x4>; -+ -+ dtt@48 { -+ compatible = "national,lm75"; -+ reg = <0x48>; -+ }; -+ -+ eeprom@50 { -+ compatible = "at24,24c16"; -+ reg = <0x50>; -+ }; -+ }; -+ -+ GPIO0: gpio-controller@ef600700 { -+ compatible = "ibm,ppc4xx-gpio"; -+ reg = <0xef600700 0x00000020>; -+ #gpio-cells = <2>; -+ gpio-controller; -+ }; -+ -+ EMAC0: ethernet@ef600800 { -+ linux,network-index = <0x0>; -+ device_type = "network"; -+ compatible = "ibm,emac-405ep", "ibm,emac"; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0xf 0x4 /* Ethernet */ -+ 0x9 0x4 /* Ethernet Wake Up */>; -+ local-mac-address = [000000000000]; /* Filled in by zImage */ -+ reg = <0xef600800 0x00000070>; -+ mal-device = <&MAL>; -+ mal-tx-channel = <0>; -+ mal-rx-channel = <0>; -+ cell-index = <0>; -+ max-frame-size = <0x5dc>; -+ rx-fifo-size = <0x1000>; -+ tx-fifo-size = <0x800>; -+ phy-mode = "mii"; -+ phy-map = <0x00000000>; -+ }; -+ -+ EMAC1: ethernet@ef600900 { -+ linux,network-index = <0x1>; -+ device_type = "network"; -+ compatible = "ibm,emac-405ep", "ibm,emac"; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0x11 0x4 /* Ethernet */ -+ 0x09 0x4 /* Ethernet Wake Up */>; -+ local-mac-address = [000000000000]; /* Filled in by zImage */ -+ reg = <0xef600900 0x00000070>; -+ mal-device = <&MAL>; -+ mal-tx-channel = <2>; -+ mal-rx-channel = <1>; -+ cell-index = <1>; -+ max-frame-size = <0x5dc>; -+ rx-fifo-size = <0x1000>; -+ tx-fifo-size = <0x800>; -+ mdio-device = <&EMAC0>; -+ phy-mode = "mii"; -+ phy-map = <0x00000001>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ user { -+ label = "magicbox:red:user"; -+ gpios = <&GPIO0 2 1>; -+ }; -+ }; -+ }; -+ -+ EBC0: ebc { -+ compatible = "ibm,ebc-405ep", "ibm,ebc"; -+ dcr-reg = <0x012 0x002>; -+ #address-cells = <2>; -+ #size-cells = <1>; -+ /* The ranges property is supplied by the bootwrapper -+ * and is based on the firmware's configuration of the -+ * EBC bridge -+ */ -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ cf_card@ff100000 { -+ compatible = "magicbox-cf", "pata-magicbox-cf"; -+ reg = <0x00000000 0xff100000 0x00001000 -+ 0x00000000 0xff200000 0x00001000>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x19 0x1 /* IRQ_TYPE_EDGE_RISING */ >; -+ }; -+ -+ nor_flash@ffc00000 { -+ compatible = "cfi-flash"; -+ bank-width = <2>; -+ reg = <0x00000000 0xffc00000 0x00400000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ partition0@0 { -+ label = "linux"; -+ reg = <0x0 0x140000>; -+ }; -+ partition1@120000 { -+ label = "rootfs"; -+ reg = <0x140000 0x280000>; -+ }; -+ partition2@3c0000 { -+ label = "u-boot"; -+ reg = <0x3c0000 0x30000>; -+ read-only; -+ }; -+ partition3@0 { -+ label = "firmware"; -+ reg = <0x0 0x3c0000>; -+ }; -+ }; -+ }; -+ -+ PCI0: pci@ec000000 { -+ device_type = "pci"; -+ #interrupt-cells = <1>; -+ #size-cells = <2>; -+ #address-cells = <3>; -+ compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; -+ primary; -+ reg = <0xeec00000 0x00000008 /* Config space access */ -+ 0xeed80000 0x00000004 /* IACK */ -+ 0xeed80000 0x00000004 /* Special cycle */ -+ 0xef480000 0x00000040>; /* Internal registers */ -+ -+ /* Outbound ranges, one memory and one IO, -+ * later cannot be changed. Chip supports a second -+ * IO range but we don't use it for now -+ */ -+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 -+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; -+ -+ /* Inbound 2GB range starting at 0 */ -+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; -+ -+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>; -+ interrupt-map = < -+ /* IDSEL 1 */ -+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 -+ -+ /* IDSEL 2 */ -+ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8 -+ -+ /* IDSEL 3 */ -+ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8 -+ -+ /* IDSEL 4 */ -+ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8 -+ >; -+ }; -+ }; -+ -+ chosen { -+ linux,stdout-path = "/plb/opb/serial@ef600300"; -+ }; -+}; ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -43,6 +43,7 @@ $(obj)/cuboot-hotfoot.o: BOOTCFLAGS += - - $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440 - $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 - $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 -+$(obj)/cuboot-magicbox.o: BOOTCFLAGS += -mcpu=405 - $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 - $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 - $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 -@@ -81,7 +82,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82 - virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ - cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \ - gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \ -- treeboot-currituck.c -+ treeboot-currituck.c cuboot-magicbox.c - src-boot := $(src-wlib) $(src-plat) empty.c - - src-boot := $(addprefix $(obj)/, $(src-boot)) -@@ -202,6 +203,7 @@ image-$(CONFIG_HOTFOOT) += cuImage.hot - image-$(CONFIG_WALNUT) += treeImage.walnut - image-$(CONFIG_ACADIA) += cuImage.acadia - image-$(CONFIG_OBS600) += uImage.obs600 -+image-$(CONFIG_MAGICBOX) += cuImage.magicbox - - # Board ports in arch/powerpc/platform/44x/Kconfig - image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony ---- a/arch/powerpc/platforms/40x/Kconfig -+++ b/arch/powerpc/platforms/40x/Kconfig -@@ -38,6 +38,16 @@ config KILAUEA - help - This option enables support for the AMCC PPC405EX evaluation board. - -+config MAGICBOX -+ bool "Magicbox" -+ depends on 40x -+ default n -+ select PPC40x_SIMPLE -+ select 405EP -+ select PCI -+ help -+ This option enables support for the Magicbox boards. -+ - config MAKALU - bool "Makalu" - depends on 40x ---- a/arch/powerpc/platforms/40x/ppc40x_simple.c -+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c -@@ -57,6 +57,7 @@ static const char *board[] __initdata = - "amcc,makalu", - "apm,klondike", - "est,hotfoot", -+ "magicbox", - "plathome,obs600" - }; - diff --git a/target/linux/ppc40x/patches-3.3/005-openrb.patch b/target/linux/ppc40x/patches-3.3/005-openrb.patch deleted file mode 100644 index 42d1fd5dd0..0000000000 --- a/target/linux/ppc40x/patches-3.3/005-openrb.patch +++ /dev/null @@ -1,447 +0,0 @@ ---- /dev/null -+++ b/arch/powerpc/boot/cuboot-openrb.c -@@ -0,0 +1,94 @@ -+/* -+ * Old U-boot compatibility for OpenRB boards -+ * -+ * Author: Gabor Juhos -+ * Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include "ops.h" -+#include "io.h" -+#include "dcr.h" -+#include "stdio.h" -+#include "4xx.h" -+#include "44x.h" -+#include "cuboot.h" -+ -+#define TARGET_4xx -+#define TARGET_405EP -+#include "ppcboot.h" -+ -+static bd_t bd; -+ -+static void fixup_perwe(void) -+{ -+#define DCRN_CPC0_PCI_BASE 0xf9 -+ -+ /* Turn on PerWE instead of PCIINT */ -+ mtdcr(DCRN_CPC0_PCI_BASE, -+ mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27)); -+ -+#undef DCRN_CPC0_PCI_BASE -+} -+ -+static void fixup_cf_card(void) -+{ -+#define CF_CS0_BASE 0xff100000 -+#define CF_CS1_BASE 0xff200000 -+ -+ /* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */ -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1CR); -+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS0_BASE | EBC_BXCR_BS_1M | -+ EBC_BXCR_BU_RW | EBC_BXCR_BW_16); -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B1AP); -+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800); -+ -+ /* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */ -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2CR); -+ mtdcr(DCRN_EBC0_CFGDATA, CF_CS1_BASE | EBC_BXCR_BS_1M | -+ EBC_BXCR_BU_RW | EBC_BXCR_BW_16); -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B2AP); -+ mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800); -+ -+#undef CF_CS0_BASE -+#undef CF_CS1_BASE -+} -+ -+static void fixup_isp116x(void) -+{ -+#define ISP116X_CS_BASE 0xf0000000 -+ -+ /* PerCS3 (ISP1160's CS): base 0xf0000000, size 32MB, 16-bit, rw */ -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B3CR); -+ mtdcr(DCRN_EBC0_CFGDATA, ISP116X_CS_BASE | EBC_BXCR_BS_32M | -+ EBC_BXCR_BU_RW | EBC_BXCR_BW_16); -+ mtdcr(DCRN_EBC0_CFGADDR, EBC_B3AP); -+ mtdcr(DCRN_EBC0_CFGDATA, 0x03016600); -+ -+#undef ISP116X_CS_BASE -+} -+ -+static void openrb_fixups(void) -+{ -+ ibm405ep_fixup_clocks(bd.bi_procfreq / 8); -+ ibm4xx_sdram_fixup_memsize(); -+ -+ fixup_perwe(); -+ fixup_cf_card(); -+ fixup_isp116x(); -+ -+ dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); -+} -+ -+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, -+ unsigned long r6, unsigned long r7) -+{ -+ CUBOOT_INIT(); -+ platform_ops.fixups = openrb_fixups; -+ platform_ops.exit = ibm40x_dbcr_reset; -+ fdt_init(_dtb_start); -+ serial_console_init(); -+} ---- /dev/null -+++ b/arch/powerpc/boot/dts/openrb.dts -@@ -0,0 +1,291 @@ -+/* -+ * Device Tree Source for OpenRB boards -+ * -+ * Copyright 2009 Gabor Juhos -+ * Copyright 2009 Imre Kaloz -+ * -+ * Based on walnut.dts -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ */ -+ -+/dts-v1/; -+ -+/ { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ model = "openrb"; -+ compatible = "openrb"; -+ dcr-parent = <&{/cpus/cpu@0}>; -+ -+ aliases { -+ ethernet0 = &EMAC0; -+ ethernet1 = &EMAC1; -+ serial0 = &UART0; -+ serial1 = &UART1; -+ }; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu@0 { -+ device_type = "cpu"; -+ model = "PowerPC,405EP"; -+ reg = <0x00000000>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ timebase-frequency = <0>; /* Filled in by zImage */ -+ i-cache-line-size = <0x20>; -+ d-cache-line-size = <0x20>; -+ i-cache-size = <0x4000>; -+ d-cache-size = <0x4000>; -+ dcr-controller; -+ dcr-access-method = "native"; -+ }; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x00000000>; /* Filled in by zImage */ -+ }; -+ -+ UIC0: interrupt-controller { -+ compatible = "ibm,uic"; -+ interrupt-controller; -+ cell-index = <0>; -+ dcr-reg = <0x0c0 0x009>; -+ #address-cells = <0>; -+ #size-cells = <0>; -+ #interrupt-cells = <2>; -+ }; -+ -+ plb { -+ compatible = "ibm,plb3"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ SDRAM0: memory-controller { -+ compatible = "ibm,sdram-405ep"; -+ dcr-reg = <0x010 0x002>; -+ }; -+ -+ MAL: mcmal { -+ compatible = "ibm,mcmal-405ep", "ibm,mcmal"; -+ dcr-reg = <0x180 0x062>; -+ num-tx-chans = <4>; -+ num-rx-chans = <2>; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0xb 0x4 /* TXEOB */ -+ 0xc 0x4 /* RXEOB */ -+ 0xa 0x4 /* SERR */ -+ 0xd 0x4 /* TXDE */ -+ 0xe 0x4 /* RXDE */>; -+ }; -+ -+ POB0: opb { -+ compatible = "ibm,opb-405ep", "ibm,opb"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges = <0xef600000 0xef600000 0x00a00000>; -+ dcr-reg = <0x0a0 0x005>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ UART0: serial@ef600300 { -+ device_type = "serial"; -+ compatible = "ns16550"; -+ reg = <0xef600300 0x00000008>; -+ virtual-reg = <0xef600300>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ current-speed = <115200>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x0 0x4>; -+ }; -+ -+ UART1: serial@ef600400 { -+ device_type = "serial"; -+ compatible = "ns16550"; -+ reg = <0xef600400 0x00000008>; -+ virtual-reg = <0xef600400>; -+ clock-frequency = <0>; /* Filled in by zImage */ -+ current-speed = <115200>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x1 0x4>; -+ }; -+ -+ IIC: i2c@ef600500 { -+ compatible = "ibm,iic-405ep", "ibm,iic"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0xef600500 0x00000011>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x2 0x4>; -+ -+ eeprom@50 { -+ compatible = "at24,24c16"; -+ reg = <0x50>; -+ }; -+ }; -+ -+ GPIO0: gpio-controller@ef600700 { -+ compatible = "ibm,ppc4xx-gpio"; -+ reg = <0xef600700 0x00000020>; -+ #gpio-cells = <2>; -+ gpio-controller; -+ }; -+ -+ EMAC0: ethernet@ef600800 { -+ linux,network-index = <0x0>; -+ device_type = "network"; -+ compatible = "ibm,emac-405ep", "ibm,emac"; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0xf 0x4 /* Ethernet */ -+ 0x9 0x4 /* Ethernet Wake Up */>; -+ local-mac-address = [000000000000]; /* Filled in by zImage */ -+ reg = <0xef600800 0x00000070>; -+ mal-device = <&MAL>; -+ mal-tx-channel = <0>; -+ mal-rx-channel = <0>; -+ cell-index = <0>; -+ max-frame-size = <0x5dc>; -+ rx-fifo-size = <0x1000>; -+ tx-fifo-size = <0x800>; -+ phy-mode = "mii"; -+ phy-map = <0x00000000>; -+ }; -+ -+ EMAC1: ethernet@ef600900 { -+ linux,network-index = <0x1>; -+ device_type = "network"; -+ compatible = "ibm,emac-405ep", "ibm,emac"; -+ interrupt-parent = <&UIC0>; -+ interrupts = < -+ 0x11 0x4 /* Ethernet */ -+ 0x09 0x4 /* Ethernet Wake Up */>; -+ local-mac-address = [000000000000]; /* Filled in by zImage */ -+ reg = <0xef600900 0x00000070>; -+ mal-device = <&MAL>; -+ mal-tx-channel = <2>; -+ mal-rx-channel = <1>; -+ cell-index = <1>; -+ max-frame-size = <0x5dc>; -+ rx-fifo-size = <0x1000>; -+ tx-fifo-size = <0x800>; -+ mdio-device = <&EMAC0>; -+ phy-mode = "mii"; -+ phy-map = <0x00000001>; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ user { -+ label = "openrb:green:user"; -+ gpios = <&GPIO0 2 1>; -+ }; -+ }; -+ }; -+ -+ EBC0: ebc { -+ compatible = "ibm,ebc-405ep", "ibm,ebc"; -+ dcr-reg = <0x012 0x002>; -+ #address-cells = <2>; -+ #size-cells = <1>; -+ /* The ranges property is supplied by the bootwrapper -+ * and is based on the firmware's configuration of the -+ * EBC bridge -+ */ -+ clock-frequency = <0>; /* Filled in by zImage */ -+ -+ isp116x@f0000000 { -+ compatible = "isp116x-hcd"; -+ oc_enable; -+ int_act_high; -+ int_edge_triggered; -+ reg = <0x00000000 0xf0000000 0x00000002 /* data */ -+ 0x00000000 0xf1000000 0x00000002 /* addr */ >; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x1b 0x1 /* IRQ_TYPE_EDGE_RISING */ >; -+ }; -+ -+ cf_card@ff100000 { -+ compatible = "magicbox-cf", "pata-magicbox-cf"; -+ reg = <0x00000000 0xff100000 0x00001000 -+ 0x00000000 0xff200000 0x00001000>; -+ interrupt-parent = <&UIC0>; -+ interrupts = <0x19 0x1 /* IRQ_TYPE_EDGE_RISING */ >; -+ }; -+ -+ nor_flash@ff800000 { -+ compatible = "cfi-flash"; -+ bank-width = <2>; -+ reg = <0x00000000 0xff800000 0x00800000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ partition0@0 { -+ label = "linux"; -+ reg = <0x0 0x140000>; -+ }; -+ partition1@120000 { -+ label = "rootfs"; -+ reg = <0x140000 0x680000>; -+ }; -+ partition2@7c0000 { -+ label = "u-boot"; -+ reg = <0x7c0000 0x30000>; -+ read-only; -+ }; -+ partition3@0 { -+ label = "firmware"; -+ reg = <0x0 0x7c0000>; -+ }; -+ }; -+ }; -+ -+ PCI0: pci@ec000000 { -+ device_type = "pci"; -+ #interrupt-cells = <1>; -+ #size-cells = <2>; -+ #address-cells = <3>; -+ compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; -+ primary; -+ reg = <0xeec00000 0x00000008 /* Config space access */ -+ 0xeed80000 0x00000004 /* IACK */ -+ 0xeed80000 0x00000004 /* Special cycle */ -+ 0xef480000 0x00000040>; /* Internal registers */ -+ -+ /* Outbound ranges, one memory and one IO, -+ * later cannot be changed. Chip supports a second -+ * IO range but we don't use it for now -+ */ -+ ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 -+ 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; -+ -+ /* Inbound 2GB range starting at 0 */ -+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; -+ -+ interrupt-map-mask = <0xf800 0x0 0x0 0x0>; -+ interrupt-map = < -+ /* IDSEL 1 */ -+ 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 -+ -+ /* IDSEL 2 */ -+ 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8 -+ -+ /* IDSEL 3 */ -+ 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8 -+ -+ /* IDSEL 4 */ -+ 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8 -+ >; -+ }; -+ }; -+ -+ chosen { -+ linux,stdout-path = "/plb/opb/serial@ef600300"; -+ }; -+}; ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -44,6 +44,7 @@ $(obj)/cuboot-taishan.o: BOOTCFLAGS += - - $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 - $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 - $(obj)/cuboot-magicbox.o: BOOTCFLAGS += -mcpu=405 -+$(obj)/cuboot-openrb.o: BOOTCFLAGS += -mcpu=405 - $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 - $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 - $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 -@@ -82,7 +83,7 @@ src-plat := of.c cuboot-52xx.c cuboot-82 - virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ - cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \ - gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \ -- treeboot-currituck.c cuboot-magicbox.c -+ treeboot-currituck.c cuboot-magicbox.c cuboot-openrb.c - src-boot := $(src-wlib) $(src-plat) empty.c - - src-boot := $(addprefix $(obj)/, $(src-boot)) -@@ -204,6 +205,7 @@ image-$(CONFIG_WALNUT) += treeImage.wa - image-$(CONFIG_ACADIA) += cuImage.acadia - image-$(CONFIG_OBS600) += uImage.obs600 - image-$(CONFIG_MAGICBOX) += cuImage.magicbox -+image-$(CONFIG_OPENRB) += cuImage.openrb - - # Board ports in arch/powerpc/platform/44x/Kconfig - image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony ---- a/arch/powerpc/platforms/40x/Kconfig -+++ b/arch/powerpc/platforms/40x/Kconfig -@@ -48,6 +48,16 @@ config MAGICBOX - help - This option enables support for the Magicbox boards. - -+config OPENRB -+ bool "OpenRB" -+ depends on 40x -+ default n -+ select PPC40x_SIMPLE -+ select 405EP -+ select PCI -+ help -+ This option enables support for the OpenRB boards. -+ - config MAKALU - bool "Makalu" - depends on 40x ---- a/arch/powerpc/platforms/40x/ppc40x_simple.c -+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c -@@ -58,6 +58,7 @@ static const char *board[] __initdata = - "apm,klondike", - "est,hotfoot", - "magicbox", -+ "openrb", - "plathome,obs600" - }; - diff --git a/target/linux/ppc40x/patches-3.3/101-pata-magicbox-cf-driver.patch b/target/linux/ppc40x/patches-3.3/101-pata-magicbox-cf-driver.patch deleted file mode 100644 index 0b4bb0d3de..0000000000 --- a/target/linux/ppc40x/patches-3.3/101-pata-magicbox-cf-driver.patch +++ /dev/null @@ -1,433 +0,0 @@ ---- a/drivers/ata/Kconfig -+++ b/drivers/ata/Kconfig -@@ -144,6 +144,16 @@ config PDC_ADMA - - If unsure, say N. - -+config PATA_MAGICBOX_CF -+ tristate "Magicbox/OpenRB Compact Flash support" -+ depends on MAGICBOX || OPENRB -+ help -+ This option enables support for a Compact Flash conected on -+ the ppc405ep expansion bus. This driver had been written for -+ the Magicbox v2 and OpenRB boards. -+ -+ If unsure, say N. -+ - config PATA_OCTEON_CF - tristate "OCTEON Boot Bus Compact Flash support" - depends on CPU_CAVIUM_OCTEON ---- a/drivers/ata/Makefile -+++ b/drivers/ata/Makefile -@@ -81,6 +81,7 @@ obj-$(CONFIG_PATA_AT91) += pata_at91.o - obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o - obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o - obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o -+obj-$(CONFIG_PATA_MAGICBOX_CF) += pata_magicbox_cf.o - obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o - obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o - obj-$(CONFIG_PATA_OPTI) += pata_opti.o ---- /dev/null -+++ b/drivers/ata/pata_magicbox_cf.c -@@ -0,0 +1,401 @@ -+/* -+ * PATA/CompactFlash driver for the MagicBox v2/OpenRB boards. -+ * -+ * Copyright (C) 2009,2012 Gabor Juhos -+ * -+ * Based on the IDE driver by Wojtek Kaniewski -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+//#include -+//#include -+#include -+#include -+ -+#define DRV_DESC "PATA/CompactFlash driver for Magicbox/OpenRB boards" -+#define DRV_NAME "pata_magicbox_cf" -+#define DRV_VERSION "0.1.0" -+ -+#define MAGICBOX_CF_REG_CMD (2 * ATA_REG_CMD) -+#define MAGICBOX_CF_REG_DATA (2 * ATA_REG_DATA) -+#define MAGICBOX_CF_REG_ERR (2 * ATA_REG_ERR) -+#define MAGICBOX_CF_REG_FEATURE (2 * ATA_REG_FEATURE) -+#define MAGICBOX_CF_REG_NSECT (2 * ATA_REG_NSECT) -+#define MAGICBOX_CF_REG_LBAL (2 * ATA_REG_LBAL) -+#define MAGICBOX_CF_REG_LBAM (2 * ATA_REG_LBAM) -+#define MAGICBOX_CF_REG_LBAH (2 * ATA_REG_LBAH) -+#define MAGICBOX_CF_REG_DEVICE (2 * ATA_REG_DEVICE) -+#define MAGICBOX_CF_REG_STATUS (2 * ATA_REG_STATUS) -+#define MAGICBOX_CF_REG_ALTSTATUS (2 * 6) -+#define MAGICBOX_CF_REG_CTL (2 * 6) -+ -+#define MAGICBOX_CF_MAXPORTS 1 -+ -+struct magicbox_cf_info { -+ void __iomem *base; -+ void __iomem *ctrl; -+}; -+ -+static inline u8 magicbox_cf_inb(void __iomem *port) -+{ -+ return (u8) (readw(port) >> 8) & 0xff; -+} -+ -+static inline void magicbox_cf_outb(void __iomem *port, u8 value) -+{ -+ writew(value << 8, port); -+} -+ -+static int magicbox_cf_set_mode(struct ata_link *link, -+ struct ata_device **error) -+{ -+ struct ata_device *dev; -+ -+ ata_for_each_dev(dev, link, ENABLED) { -+ ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n"); -+ dev->pio_mode = XFER_PIO_0; -+ dev->xfer_mode = XFER_PIO_0; -+ dev->xfer_shift = ATA_SHIFT_PIO; -+ dev->flags |= ATA_DFLAG_PIO; -+ } -+ -+ return 0; -+} -+ -+static void magicbox_cf_exec_command(struct ata_port *ap, -+ const struct ata_taskfile *tf) -+{ -+ DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); -+ -+ magicbox_cf_outb(ap->ioaddr.command_addr, tf->command); -+ ata_sff_pause(ap); -+} -+ -+static u8 magicbox_cf_check_status(struct ata_port *ap) -+{ -+ u8 status; -+ -+ status = magicbox_cf_inb(ap->ioaddr.status_addr); -+ -+ DPRINTK("ata%u: status 0x%X, from %p\n", ap->print_id, status, -+ ap->ioaddr.status_addr); -+ -+ return status; -+} -+ -+static u8 magicbox_cf_check_altstatus(struct ata_port *ap) -+{ -+ u8 altstatus; -+ -+ altstatus = magicbox_cf_inb(ap->ioaddr.altstatus_addr); -+ -+ DPRINTK("ata%u: altstatus 0x%X, from %p\n", ap->print_id, -+ altstatus, ap->ioaddr.altstatus_addr); -+ -+ return altstatus; -+} -+ -+static void magicbox_cf_dev_select(struct ata_port *ap, unsigned int device) -+{ -+ /* Nothing to do. We are supporting one device only. */ -+} -+ -+static void magicbox_cf_tf_load(struct ata_port *ap, -+ const struct ata_taskfile *tf) -+{ -+ struct ata_ioports *ioaddr = &ap->ioaddr; -+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; -+ -+ if (tf->ctl != ap->last_ctl) { -+ magicbox_cf_outb(ioaddr->ctl_addr, tf->ctl); -+ ap->last_ctl = tf->ctl; -+ ata_wait_idle(ap); -+ } -+ -+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { -+ magicbox_cf_outb(ioaddr->feature_addr, tf->hob_feature); -+ magicbox_cf_outb(ioaddr->nsect_addr, tf->hob_nsect); -+ magicbox_cf_outb(ioaddr->lbal_addr, tf->hob_lbal); -+ magicbox_cf_outb(ioaddr->lbam_addr, tf->hob_lbam); -+ magicbox_cf_outb(ioaddr->lbah_addr, tf->hob_lbah); -+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", -+ tf->hob_feature, -+ tf->hob_nsect, -+ tf->hob_lbal, -+ tf->hob_lbam, -+ tf->hob_lbah); -+ } -+ -+ if (is_addr) { -+ magicbox_cf_outb(ioaddr->feature_addr, tf->feature); -+ magicbox_cf_outb(ioaddr->nsect_addr, tf->nsect); -+ magicbox_cf_outb(ioaddr->lbal_addr, tf->lbal); -+ magicbox_cf_outb(ioaddr->lbam_addr, tf->lbam); -+ magicbox_cf_outb(ioaddr->lbah_addr, tf->lbah); -+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", -+ tf->feature, -+ tf->nsect, -+ tf->lbal, -+ tf->lbam, -+ tf->lbah); -+ } -+ -+ if (tf->flags & ATA_TFLAG_DEVICE) { -+ magicbox_cf_outb(ioaddr->device_addr, tf->device); -+ VPRINTK("device 0x%X\n", tf->device); -+ } -+ -+ ata_wait_idle(ap); -+} -+ -+static void magicbox_cf_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -+{ -+ struct ata_ioports *ioaddr = &ap->ioaddr; -+ -+ tf->command = magicbox_cf_inb(ap->ioaddr.status_addr); -+ tf->feature = magicbox_cf_inb(ioaddr->error_addr); -+ tf->nsect = magicbox_cf_inb(ioaddr->nsect_addr); -+ tf->lbal = magicbox_cf_inb(ioaddr->lbal_addr); -+ tf->lbam = magicbox_cf_inb(ioaddr->lbam_addr); -+ tf->lbah = magicbox_cf_inb(ioaddr->lbah_addr); -+ tf->device = magicbox_cf_inb(ioaddr->device_addr); -+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", -+ tf->feature, -+ tf->nsect, -+ tf->lbal, -+ tf->lbam, -+ tf->lbah); -+ -+ if (tf->flags & ATA_TFLAG_LBA48) { -+ magicbox_cf_outb(ioaddr->ctl_addr, tf->ctl | ATA_HOB); -+ tf->hob_feature = magicbox_cf_inb(ioaddr->error_addr); -+ tf->hob_nsect = magicbox_cf_inb(ioaddr->nsect_addr); -+ tf->hob_lbal = magicbox_cf_inb(ioaddr->lbal_addr); -+ tf->hob_lbam = magicbox_cf_inb(ioaddr->lbam_addr); -+ tf->hob_lbah = magicbox_cf_inb(ioaddr->lbah_addr); -+ magicbox_cf_outb(ioaddr->ctl_addr, tf->ctl); -+ ap->last_ctl = tf->ctl; -+ VPRINTK("hob: feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", -+ tf->feature, -+ tf->nsect, -+ tf->lbal, -+ tf->lbam, -+ tf->lbah); -+ } -+} -+ -+static unsigned int magicbox_cf_data_xfer(struct ata_device *dev, -+ unsigned char *buf, -+ unsigned int buflen, int rw) -+{ -+ struct ata_port *ap = dev->link->ap; -+ unsigned int words = buflen >> 1; -+ unsigned int i; -+ u16 *buf16 = (u16 *) buf; -+ void __iomem *mmio = ap->ioaddr.data_addr; -+ -+ /* Transfer multiple of 2 bytes */ -+ if (rw == READ) -+ for (i = 0; i < words; i++) -+ buf16[i] = readw(mmio); -+ else -+ for (i = 0; i < words; i++) -+ writew(buf16[i], mmio); -+ -+ /* Transfer trailing 1 byte, if any. */ -+ if (unlikely(buflen & 0x01)) { -+ u16 align_buf[1] = { 0 }; -+ unsigned char *trailing_buf = buf + buflen - 1; -+ -+ if (rw == READ) { -+ align_buf[0] = readw(mmio); -+ memcpy(trailing_buf, align_buf, 1); -+ } else { -+ memcpy(align_buf, trailing_buf, 1); -+ writew(align_buf[0], mmio); -+ } -+ words++; -+ } -+ -+ return words << 1; -+} -+ -+static void magicbox_cf_irq_on(struct ata_port *ap) -+{ -+ /* Nothing to do. */ -+} -+ -+static void magicbox_cf_irq_clear(struct ata_port *ap) -+{ -+ /* Nothing to do. */ -+} -+ -+static struct ata_port_operations magicbox_cf_port_ops = { -+ .inherits = &ata_sff_port_ops, -+ -+ .cable_detect = ata_cable_40wire, -+ .set_mode = magicbox_cf_set_mode, -+ -+ .sff_exec_command = magicbox_cf_exec_command, -+ .sff_check_status = magicbox_cf_check_status, -+ .sff_check_altstatus = magicbox_cf_check_altstatus, -+ .sff_dev_select = magicbox_cf_dev_select, -+ .sff_tf_load = magicbox_cf_tf_load, -+ .sff_tf_read = magicbox_cf_tf_read, -+ .sff_data_xfer = magicbox_cf_data_xfer, -+ -+ .sff_irq_on = magicbox_cf_irq_on, -+ .sff_irq_clear = magicbox_cf_irq_clear, -+ -+ .port_start = ATA_OP_NULL, -+}; -+ -+static struct scsi_host_template magicbox_cf_sht = { -+ ATA_PIO_SHT(DRV_NAME), -+}; -+ -+static inline void magicbox_cf_setup_port(struct ata_host *host) -+{ -+ struct magicbox_cf_info *info = host->private_data; -+ struct ata_port *ap; -+ -+ ap = host->ports[0]; -+ -+ ap->ops = &magicbox_cf_port_ops; -+ ap->pio_mask = ATA_PIO4; -+ ap->flags |= ATA_FLAG_NO_ATAPI; -+ -+ ap->ioaddr.cmd_addr = info->base + MAGICBOX_CF_REG_CMD; -+ ap->ioaddr.data_addr = info->base + MAGICBOX_CF_REG_DATA; -+ ap->ioaddr.error_addr = info->base + MAGICBOX_CF_REG_ERR; -+ ap->ioaddr.feature_addr = info->base + MAGICBOX_CF_REG_FEATURE; -+ ap->ioaddr.nsect_addr = info->base + MAGICBOX_CF_REG_NSECT; -+ ap->ioaddr.lbal_addr = info->base + MAGICBOX_CF_REG_LBAL; -+ ap->ioaddr.lbam_addr = info->base + MAGICBOX_CF_REG_LBAM; -+ ap->ioaddr.lbah_addr = info->base + MAGICBOX_CF_REG_LBAH; -+ ap->ioaddr.device_addr = info->base + MAGICBOX_CF_REG_DEVICE; -+ ap->ioaddr.status_addr = info->base + MAGICBOX_CF_REG_STATUS; -+ ap->ioaddr.command_addr = info->base + MAGICBOX_CF_REG_CMD; -+ -+ ap->ioaddr.altstatus_addr = info->ctrl + MAGICBOX_CF_REG_ALTSTATUS; -+ ap->ioaddr.ctl_addr = info->ctrl + MAGICBOX_CF_REG_CTL; -+ -+ ata_port_desc(ap, "cmd 0x%p ctl 0x%p", ap->ioaddr.cmd_addr, -+ ap->ioaddr.ctl_addr); -+} -+ -+static int __devinit magicbox_cf_of_probe(struct platform_device *op) -+{ -+ struct magicbox_cf_info *info; -+ struct ata_host *host; -+ int irq; -+ int ret = 0; -+ -+ info = kzalloc(sizeof(struct magicbox_cf_info), GFP_KERNEL); -+ if (info == NULL) { -+ ret = -ENOMEM; -+ goto err_exit; -+ } -+ -+ irq = irq_of_parse_and_map(op->dev.of_node, 0); -+ if (irq < 0) { -+ dev_err(&op->dev, "invalid irq\n"); -+ ret = -EINVAL; -+ goto err_free_info; -+ } -+ -+ info->base = of_iomap(op->dev.of_node, 0); -+ if (info->base == NULL) { -+ ret = -ENOMEM; -+ goto err_free_info; -+ } -+ -+ info->ctrl = of_iomap(op->dev.of_node, 1); -+ if (info->ctrl == NULL) { -+ ret = -ENOMEM; -+ goto err_unmap_base; -+ } -+ -+ host = ata_host_alloc(&op->dev, MAGICBOX_CF_MAXPORTS); -+ if (host == NULL) { -+ ret = -ENOMEM; -+ goto err_unmap_ctrl; -+ } -+ -+ host->private_data = info; -+ magicbox_cf_setup_port(host); -+ -+ ret = ata_host_activate(host, irq, ata_sff_interrupt, -+ IRQF_TRIGGER_RISING, &magicbox_cf_sht); -+ if (ret) -+ goto err_unmap_ctrl; -+ -+ dev_set_drvdata(&op->dev, host); -+ return 0; -+ -+ err_unmap_ctrl: -+ iounmap(info->ctrl); -+ err_unmap_base: -+ iounmap(info->base); -+ err_free_info: -+ kfree(info); -+ err_exit: -+ return ret; -+} -+ -+static __devexit int magicbox_cf_of_remove(struct platform_device *op) -+{ -+ struct ata_host *host = dev_get_drvdata(&op->dev); -+ struct magicbox_cf_info *info = host->private_data; -+ -+ ata_host_detach(host); -+ iounmap(info->ctrl); -+ iounmap(info->base); -+ kfree(info); -+ -+ return 0; -+} -+ -+static struct of_device_id magicbox_cf_of_match[] = { -+ { .compatible = "pata-magicbox-cf", }, -+ {}, -+}; -+ -+static struct platform_driver magicbox_cf_of_platform_driver = { -+ .probe = magicbox_cf_of_probe, -+ .remove = __devexit_p(magicbox_cf_of_remove), -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = magicbox_cf_of_match, -+ }, -+}; -+ -+static int __init magicbox_cf_init(void) -+{ -+ return platform_driver_register(&magicbox_cf_of_platform_driver); -+} -+ -+static void __exit magicbox_cf_exit(void) -+{ -+ platform_driver_unregister(&magicbox_cf_of_platform_driver); -+} -+ -+module_init(magicbox_cf_init); -+module_exit(magicbox_cf_exit); -+ -+MODULE_DESCRIPTION(DRV_DESC); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_LICENSE("GPL v2"); -+MODULE_VERSION(DRV_VERSION); -+MODULE_DEVICE_TABLE(of, magicbox_cf_of_match); diff --git a/target/linux/ppc40x/patches-3.3/110-kilauea_openwrt_flashmap.patch b/target/linux/ppc40x/patches-3.3/110-kilauea_openwrt_flashmap.patch deleted file mode 100644 index ab44a2d572..0000000000 --- a/target/linux/ppc40x/patches-3.3/110-kilauea_openwrt_flashmap.patch +++ /dev/null @@ -1,55 +0,0 @@ ---- a/arch/powerpc/boot/dts/kilauea.dts -+++ b/arch/powerpc/boot/dts/kilauea.dts -@@ -102,8 +102,8 @@ - compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; - dcr-reg = <0x010 0x002>; - interrupt-parent = <&UIC2>; -- interrupts = <0x5 0x4 /* ECC DED Error */ -- 0x6 0x4>; /* ECC SEC Error */ -+ interrupts = <0x5 0x4 /* ECC DED Error */ -+ 0x6 0x4>; /* ECC SEC Error */ - }; - - CRYPTO: crypto@ef700000 { -@@ -157,30 +157,30 @@ - reg = <0x00000000 0x00000000 0x04000000>; - #address-cells = <1>; - #size-cells = <1>; -- partition@0 { -+ partition0@0 { - label = "kernel"; - reg = <0x00000000 0x001e0000>; - }; -- partition@1e0000 { -+ partition1@1e0000 { - label = "dtb"; - reg = <0x001e0000 0x00020000>; - }; -- partition@200000 { -- label = "root"; -- reg = <0x00200000 0x00200000>; -- }; -- partition@400000 { -- label = "user"; -- reg = <0x00400000 0x03b60000>; -+ partition2@200000 { -+ label = "rootfs"; -+ reg = <0x00200000 0x03d60000>; - }; -- partition@3f60000 { -+ partition3@3f60000 { - label = "env"; - reg = <0x03f60000 0x00040000>; - }; -- partition@3fa0000 { -+ partition4@3fa0000 { - label = "u-boot"; - reg = <0x03fa0000 0x00060000>; - }; -+ partition5@0 { -+ label = "firmware"; -+ reg = <0x00000000 0x03f60000>; -+ }; - }; - - ndfc@1,0 { diff --git a/target/linux/ppc40x/patches-3.3/120-usb-isp116x-hcd-add-of-binding.patch b/target/linux/ppc40x/patches-3.3/120-usb-isp116x-hcd-add-of-binding.patch deleted file mode 100644 index 2f25022664..0000000000 --- a/target/linux/ppc40x/patches-3.3/120-usb-isp116x-hcd-add-of-binding.patch +++ /dev/null @@ -1,289 +0,0 @@ ---- a/drivers/usb/host/isp116x-hcd.c -+++ b/drivers/usb/host/isp116x-hcd.c -@@ -1535,6 +1535,7 @@ static struct hc_driver isp116x_hc_drive - - /*----------------------------------------------------------------*/ - -+#ifdef CONFIG_USB_ISP116X_HCD_PLATFORM - static int isp116x_remove(struct platform_device *pdev) - { - struct usb_hcd *hcd = platform_get_drvdata(pdev); -@@ -1708,22 +1709,249 @@ static struct platform_driver isp116x_dr - }, - }; - -+static inline int isp116x_platform_register(void) -+{ -+ return platform_driver_register(&isp116x_driver); -+} -+ -+static inline void isp116x_platform_unregister(void) -+{ -+ platform_driver_unregister(&isp116x_driver); -+} -+#else -+static inline int isp116x_platform_register(void) { return 0; }; -+static void isp116x_platform_unregister(void) {}; -+#endif /* CONFIG_USB_ISP116X_PLATFORM */ -+ -+/*-----------------------------------------------------------------*/ -+ -+#ifdef CONFIG_USB_ISP116X_HCD_OF -+ -+#include -+ -+#ifdef USE_PLATFORM_DELAY -+static void isp116x_of_delay(struct device *ddev, int delay) -+{ -+ ndelay(delay); -+} -+#else -+#define isp116x_of_delay NULL -+#endif -+ -+static int __devinit isp116x_of_probe(struct platform_device *op) -+{ -+ struct device_node *dn = op->dev.of_node; -+ struct usb_hcd *hcd; -+ struct isp116x *isp116x; -+ struct resource addr, data; -+ struct isp116x_platform_data *board; -+ void __iomem *addr_reg; -+ void __iomem *data_reg; -+ int irq; -+ int ret = 0; -+ unsigned long irqflags; -+ -+ ret = of_address_to_resource(dn, 0, &data); -+ if (ret) -+ return ret; -+ -+ ret = of_address_to_resource(dn, 1, &addr); -+ if (ret) -+ return ret; -+ -+ board = kzalloc(sizeof(struct isp116x_platform_data), GFP_KERNEL); -+ if (board == NULL) -+ return -ENOMEM; -+ -+ if (!request_mem_region(addr.start, resource_size(&addr), hcd_name)) { -+ ret = -EBUSY; -+ goto err_free_board; -+ } -+ -+ addr_reg = ioremap_nocache(addr.start, resource_size(&addr)); -+ if (addr_reg == NULL) { -+ ret = -ENOMEM; -+ goto err_release_addr; -+ } -+ -+ if (!request_mem_region(data.start, resource_size(&data), hcd_name)) { -+ ret = -EBUSY; -+ goto err_unmap_addr; -+ } -+ -+ data_reg = ioremap_nocache(data.start, resource_size(&data)); -+ if (data_reg == NULL) { -+ ret = -ENOMEM; -+ goto err_release_data; -+ } -+ -+ irq = irq_of_parse_and_map(dn, 0); -+ if (irq == NO_IRQ) { -+ ret = -EINVAL; -+ goto err_unmap_data; -+ } -+ -+ /* allocate and initialize hcd */ -+ hcd = usb_create_hcd(&isp116x_hc_driver, &op->dev, dev_name(&op->dev)); -+ if (!hcd) { -+ ret = -ENOMEM; -+ goto err_irq_dispose; -+ } -+ -+ /* this rsrc_start is bogus */ -+ hcd->rsrc_start = addr.start; -+ isp116x = hcd_to_isp116x(hcd); -+ isp116x->data_reg = data_reg; -+ isp116x->addr_reg = addr_reg; -+ isp116x->board = board; -+ spin_lock_init(&isp116x->lock); -+ INIT_LIST_HEAD(&isp116x->async); -+ -+ board->delay = isp116x_of_delay; -+ if (of_get_property(dn, "sel15Kres", NULL)) -+ board->sel15Kres = 1; -+ if (of_get_property(dn, "oc_enable", NULL)) -+ board->oc_enable = 1; -+ if (of_get_property(dn, "remote_wakeup_enable", NULL)) -+ board->remote_wakeup_enable = 1; -+ -+ if (of_get_property(dn, "int_act_high", NULL)) -+ board->int_act_high = 1; -+ if (of_get_property(dn, "int_edge_triggered", NULL)) -+ board->int_edge_triggered = 1; -+ -+ if (board->int_edge_triggered) -+ irqflags = board->int_act_high ? IRQF_TRIGGER_RISING : -+ IRQF_TRIGGER_FALLING; -+ else -+ irqflags = board->int_act_high ? IRQF_TRIGGER_HIGH : -+ IRQF_TRIGGER_LOW; -+ -+ ret = usb_add_hcd(hcd, irq, irqflags | IRQF_DISABLED); -+ if (ret) -+ goto err_put_hcd; -+ -+ ret = create_debug_file(isp116x); -+ if (ret) { -+ ERR("Couldn't create debugfs entry\n"); -+ goto err_remove_hcd; -+ } -+ -+ return 0; -+ -+ err_remove_hcd: -+ usb_remove_hcd(hcd); -+ err_put_hcd: -+ usb_put_hcd(hcd); -+ err_irq_dispose: -+ irq_dispose_mapping(irq); -+ err_unmap_data: -+ iounmap(data_reg); -+ err_release_data: -+ release_mem_region(data.start, resource_size(&data)); -+ err_unmap_addr: -+ iounmap(addr_reg); -+ err_release_addr: -+ release_mem_region(addr.start, resource_size(&addr)); -+ err_free_board: -+ kfree(board); -+ return ret; -+} -+ -+static __devexit int isp116x_of_remove(struct platform_device *op) -+{ -+ struct usb_hcd *hcd = dev_get_drvdata(&op->dev); -+ struct isp116x *isp116x; -+ struct resource res; -+ -+ if (!hcd) -+ return 0; -+ -+ dev_set_drvdata(&op->dev, NULL); -+ -+ isp116x = hcd_to_isp116x(hcd); -+ remove_debug_file(isp116x); -+ usb_remove_hcd(hcd); -+ -+ irq_dispose_mapping(hcd->irq); -+ -+ iounmap(isp116x->data_reg); -+ (void) of_address_to_resource(op->dev.of_node, 0, &res); -+ release_mem_region(res.start, resource_size(&res)); -+ -+ iounmap(isp116x->addr_reg); -+ (void) of_address_to_resource(op->dev.of_node, 1, &res); -+ release_mem_region(res.start, resource_size(&res)); -+ -+ kfree(isp116x->board); -+ usb_put_hcd(hcd); -+ -+ return 0; -+} -+ -+static struct of_device_id isp116x_of_match[] = { -+ { .compatible = "isp116x-hcd", }, -+ {}, -+}; -+ -+static struct platform_driver isp116x_of_platform_driver = { -+ .probe = isp116x_of_probe, -+ .remove = __devexit_p(isp116x_of_remove), -+ .driver = { -+ .name = "isp116x-hcd-of", -+ .owner = THIS_MODULE, -+ .of_match_table = isp116x_of_match, -+ }, -+}; -+ -+static int __init isp116x_of_register(void) -+{ -+ return platform_driver_register(&isp116x_of_platform_driver); -+} -+ -+static void __exit isp116x_of_unregister(void) -+{ -+ platform_driver_unregister(&isp116x_of_platform_driver); -+} -+ -+MODULE_DEVICE_TABLE(of, isp116x_of_match); -+ -+#else -+static inline int isp116x_of_register(void) { return 0; }; -+static void isp116x_of_unregister(void) {}; -+#endif /* CONFIG_USB_ISP116X_HCD_OF */ -+ - /*-----------------------------------------------------------------*/ - - static int __init isp116x_init(void) - { -+ int ret; -+ - if (usb_disabled()) - return -ENODEV; - - INFO("driver %s, %s\n", hcd_name, DRIVER_VERSION); -- return platform_driver_register(&isp116x_driver); -+ ret = isp116x_platform_register(); -+ if (ret) -+ return ret; -+ -+ ret = isp116x_of_register(); -+ if (ret) -+ goto err_platform_unregister; -+ -+ return 0; -+ -+ err_platform_unregister: -+ isp116x_platform_unregister(); -+ return ret; - } - - module_init(isp116x_init); - - static void __exit isp116x_cleanup(void) - { -- platform_driver_unregister(&isp116x_driver); -+ isp116x_of_unregister(); -+ isp116x_platform_unregister(); - } - - module_exit(isp116x_cleanup); ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -251,6 +251,24 @@ config USB_ISP116X_HCD - To compile this driver as a module, choose M here: the - module will be called isp116x-hcd. - -+config USB_ISP116X_HCD_PLATFORM -+ bool "ISP116X support for controllers on platform bus" -+ depends on USB_ISP116X_HCD -+ default n if PPC_OF -+ default y -+ ---help--- -+ Enables support for the ISP116x USB controller present on the -+ platform bus. -+ -+config USB_ISP116X_HCD_OF -+ bool "ISP116X support for controllers on OF platform bus" -+ depends on USB_ISP116X_HCD && PPC_OF -+ default y if PPC_OF -+ default n -+ ---help--- -+ Enables support for the ISP116x USB controller present on the -+ OpenFirmware platform bus. -+ - config USB_ISP1760_HCD - tristate "ISP 1760 HCD support" - depends on USB && EXPERIMENTAL diff --git a/target/linux/ppc40x/patches-3.3/121-usb-isp116x-hcd-ppc405-register-access.patch b/target/linux/ppc40x/patches-3.3/121-usb-isp116x-hcd-ppc405-register-access.patch deleted file mode 100644 index c81d18a444..0000000000 --- a/target/linux/ppc40x/patches-3.3/121-usb-isp116x-hcd-ppc405-register-access.patch +++ /dev/null @@ -1,111 +0,0 @@ ---- a/drivers/usb/host/isp116x.h -+++ b/drivers/usb/host/isp116x.h -@@ -364,22 +364,64 @@ struct isp116x_ep { - #define IRQ_TEST() do{}while(0) - #endif - -+#ifdef CONFIG_405EP -+static inline void isp116x_writew(u16 val, void __iomem *addr) -+{ -+ writew(cpu_to_le16(val), addr); -+} -+ -+static inline u16 isp116x_readw(void __iomem *addr) -+{ -+ return le16_to_cpu(readw(addr)); -+} -+ -+static inline void isp116x_raw_writew(u16 val, void __iomem *addr) -+{ -+ writew(cpu_to_le16(val), addr); -+} -+ -+static inline u16 isp116x_raw_readw(void __iomem *addr) -+{ -+ return le16_to_cpu(readw(addr)); -+} -+#else -+static inline void isp116x_writew(u16 val, void __iomem *addr) -+{ -+ writew(val, addr); -+} -+ -+static inline u16 isp116x_readw(void __iomem *addr) -+{ -+ return readw(addr); -+} -+ -+static inline void isp116x_raw_writew(u16 val, void __iomem *addr) -+{ -+ __raw_writew(val, addr); -+} -+ -+static inline u16 isp116x_raw_readw(void __iomem *addr) -+{ -+ return __raw_readw(addr); -+} -+#endif -+ - static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg) - { - IRQ_TEST(); -- writew(reg & 0xff, isp116x->addr_reg); -+ isp116x_writew(reg & 0xff, isp116x->addr_reg); - isp116x_delay(isp116x, 300); - } - - static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val) - { -- writew(val, isp116x->data_reg); -+ isp116x_writew(val, isp116x->data_reg); - isp116x_delay(isp116x, 150); - } - - static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val) - { -- __raw_writew(val, isp116x->data_reg); -+ isp116x_raw_writew(val, isp116x->data_reg); - isp116x_delay(isp116x, 150); - } - -@@ -387,7 +429,7 @@ static inline u16 isp116x_read_data16(st - { - u16 val; - -- val = readw(isp116x->data_reg); -+ val = isp116x_readw(isp116x->data_reg); - isp116x_delay(isp116x, 150); - return val; - } -@@ -396,16 +438,16 @@ static inline u16 isp116x_raw_read_data1 - { - u16 val; - -- val = __raw_readw(isp116x->data_reg); -+ val = isp116x_raw_readw(isp116x->data_reg); - isp116x_delay(isp116x, 150); - return val; - } - - static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val) - { -- writew(val & 0xffff, isp116x->data_reg); -+ isp116x_writew(val & 0xffff, isp116x->data_reg); - isp116x_delay(isp116x, 150); -- writew(val >> 16, isp116x->data_reg); -+ isp116x_writew(val >> 16, isp116x->data_reg); - isp116x_delay(isp116x, 150); - } - -@@ -413,9 +455,9 @@ static inline u32 isp116x_read_data32(st - { - u32 val; - -- val = (u32) readw(isp116x->data_reg); -+ val = (u32) isp116x_readw(isp116x->data_reg); - isp116x_delay(isp116x, 150); -- val |= ((u32) readw(isp116x->data_reg)) << 16; -+ val |= ((u32) isp116x_readw(isp116x->data_reg)) << 16; - isp116x_delay(isp116x, 150); - return val; - } -- 2.11.0