luka [Fri, 19 Dec 2014 22:02:59 +0000 (22:02 +0000)]
mvsw6171: note support for
88E6172 switches
The '6171 and '6172 are similar enough to work
without any changes to the code.
Signed-off-by: Claudio Leite <leitec@staticky.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43753
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Fri, 19 Dec 2014 11:05:13 +0000 (11:05 +0000)]
kirkwood: add *plugs to uci-defaults
Set defaults health led to a timer heartbeet (200/800)
and populate network for:
- GuruplugServerPlus
- SheevaPlug
- SheevaPlug with eSATA
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43752
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Thu, 18 Dec 2014 18:38:43 +0000 (18:38 +0000)]
kikwood: populate kirkwood.sh with new boards
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43751
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Thu, 18 Dec 2014 18:38:38 +0000 (18:38 +0000)]
kirkwood: set default EA4500 switch config
This maps the LAN ports to eth0 and WAN port to eth1.
Since there are two interfaces the 802.1q VLAN mode
is unnecessary and left disabled. Port-based VLANs
are used instead.
Signed-off-by: Claudio Leite <leitec@staticky.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43750
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 18 Dec 2014 16:25:22 +0000 (16:25 +0000)]
kernel: bgmac: fix some problems
There are some problems in the napi usage that are fixed now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43749
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 18 Dec 2014 16:23:42 +0000 (16:23 +0000)]
bcm53xx: PCIe: add link check again
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43748
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Thu, 18 Dec 2014 15:53:46 +0000 (15:53 +0000)]
uboot-envtools: add more kirkwood boards
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43747
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 18 Dec 2014 11:57:42 +0000 (11:57 +0000)]
ar7: remove leftover 3.10 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43746
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 18 Dec 2014 11:57:36 +0000 (11:57 +0000)]
binutils: break-out libbfd, libopcodes and ar
Package libbfd, libopcodes and ar seperately.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43745
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 18 Dec 2014 11:28:53 +0000 (11:28 +0000)]
ar71xx: add support for qca956x soc
This patch adds soc support for QCA9561 and TP9343.
TP9343 is a reduced version of QCA9561, which can be found in TP-LINK routers in China.
The qca956x_wmac has not yet been supported by ath9k.
tested on TL-WDR6500 and TL-WR882N v1 (Chinese version)
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43744
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 18 Dec 2014 11:28:47 +0000 (11:28 +0000)]
ar8216: Inline function ar8xxx_create_mii
Inline function ar8xxx_create_mii.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43743
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 18 Dec 2014 11:28:39 +0000 (11:28 +0000)]
ar8216: Remove read/write/rmw member functions from ar8xxx_priv
Remove read/write/rmw member functions from ar8xxx_priv
There seems to be no real benefit of the ar8xxx_priv member functions
read/write/rmw as one implementation exists for each of them only.
Especially ar8xxx_mii_rmw is assigned to priv->rmw first and then
mapped to ar8xxx_rmw.
Rename the ar8xxx_mii_.. functions to ar8xxx_.. and use them directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43742
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 18 Dec 2014 11:28:34 +0000 (11:28 +0000)]
ar8216: Create helpers mii_read32 / mii_write32 for 32 bit MII ops
Create helpers mii_read32 / mii_write32 for 32 bit MII ops.
Rename r3 variable to page in ar8xxx_mii_write to make it consistent
with the other ar8xxx_mii_xxxx functions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43741
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 18 Dec 2014 11:28:28 +0000 (11:28 +0000)]
ar8216: Factor out chip-specific parameters from ar8xxx_probe_switch
Factor out chip-specific parameters from ar8xxx_probe_switch.
Move the ar8xxx_chip definitions after the swops definitions.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43740
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 18 Dec 2014 11:28:20 +0000 (11:28 +0000)]
ar8216: remove unused function parameter in ar8327_led_register
Remove unused function parameter in ar8327_led_register.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43739
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Wed, 17 Dec 2014 14:53:25 +0000 (14:53 +0000)]
bcm53xx: backport spi-nor changes and update bcm53xxspiflash
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43738
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 17 Dec 2014 12:27:14 +0000 (12:27 +0000)]
kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43736
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Wed, 17 Dec 2014 08:33:55 +0000 (08:33 +0000)]
kirkwood: add sheevaplug and derivatives
Add kirkwood FDT:
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
- Topkick1281P2
Signed-off-by: Gérald Kerma <drEagle@doukki.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43735
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Wed, 17 Dec 2014 08:27:38 +0000 (08:27 +0000)]
[ar71xx]: Belkin AC 1750 DB (F9K1115v2) support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43734
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Wed, 17 Dec 2014 05:59:12 +0000 (05:59 +0000)]
dnsmasq: allow de-selecting features from -full variant.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43733
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Tue, 16 Dec 2014 12:43:50 +0000 (12:43 +0000)]
iproute2: bump version from 3.16.0 to 3.17.0
Signed-off-by: Russell Senior <russell@personaltelco.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43731
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Tue, 16 Dec 2014 09:28:59 +0000 (09:28 +0000)]
nftables: bump to release 0.4, cleanup our patches
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43730
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Tue, 16 Dec 2014 09:22:49 +0000 (09:22 +0000)]
libnftnl: bump to upstream release 1.0.3
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43729
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Tue, 16 Dec 2014 09:16:00 +0000 (09:16 +0000)]
cyassl: bump to 3.3.0
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43728
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 15 Dec 2014 20:14:27 +0000 (20:14 +0000)]
build: prevent spurious host-build re-builds by touching .built after the install command before touching .installed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43721
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 15 Dec 2014 15:55:37 +0000 (15:55 +0000)]
ralink: remove partitoon map from mt7621.dtsi
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43720
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Mon, 15 Dec 2014 15:43:46 +0000 (15:43 +0000)]
bcm53xx: sysupgrade support for devices with serial flash
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43719
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Mon, 15 Dec 2014 11:09:14 +0000 (11:09 +0000)]
brcm47xx: extract magics from specific upgrade images (and still reject them)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43718
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 15 Dec 2014 10:37:14 +0000 (10:37 +0000)]
fstools: update to latest git HEAD
adds a few cleanups and extroot/ubi support
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43717
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 15 Dec 2014 10:37:09 +0000 (10:37 +0000)]
uboot-envtools: enable UBI support per default on oxnas
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43716
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 15 Dec 2014 10:37:00 +0000 (10:37 +0000)]
add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43715
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Mon, 15 Dec 2014 09:59:44 +0000 (09:59 +0000)]
brcm47xx: detect (and still reject for now) CyberTAN fw format
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43714
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 15 Dec 2014 09:44:01 +0000 (09:44 +0000)]
procd: update to latest git HEAD
fixes a bug where wdt write happened with no valid fd available
--> procd: WDT failed to write: Bad file descriptor
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43711
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Mon, 15 Dec 2014 09:41:47 +0000 (09:41 +0000)]
nftables: mini-bump and patch cleanup
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43710
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Mon, 15 Dec 2014 09:10:43 +0000 (09:10 +0000)]
ramips: update mtd patches to apply after changes from r43700
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43709
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Mon, 15 Dec 2014 08:51:14 +0000 (08:51 +0000)]
brcm47xx: use separated function in upgrade to detect file type
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43708
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Sun, 14 Dec 2014 16:03:45 +0000 (16:03 +0000)]
nftables: bump to latest git, fix mini-gmp patches
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43707
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Sun, 14 Dec 2014 16:03:18 +0000 (16:03 +0000)]
libnftnl: bump to latest git
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43706
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 14 Dec 2014 08:57:58 +0000 (08:57 +0000)]
kirkwood: enable EA4500 switch on 3.18
Signed-off-by: Claudio Leite <leitec@staticky.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43704
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 14 Dec 2014 08:57:52 +0000 (08:57 +0000)]
gemini: update usb driver and merge registers into one patch
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43703
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 14 Dec 2014 08:57:43 +0000 (08:57 +0000)]
gemini: merge register ethernet patches into one
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43702
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 14 Dec 2014 08:57:16 +0000 (08:57 +0000)]
ralink: drop old pinmux nodes from dts files
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43701
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Sun, 14 Dec 2014 00:35:03 +0000 (00:35 +0000)]
kernel: warn users to use the new (dedicated) firmware splitter
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43700
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 13 Dec 2014 23:58:47 +0000 (23:58 +0000)]
toolchain: do not include libatomic.so in the libc package
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43699
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 13 Dec 2014 23:58:35 +0000 (23:58 +0000)]
nvram: remove libnvram.so, it is unused and incompatible to the broadcom API anyway
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43698
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Sat, 13 Dec 2014 20:06:47 +0000 (20:06 +0000)]
kernel: move old firmware uimage splitter into separated patch
This will allow us to drop it in the future. This patch doesn't change
the final mtdpart.c, it remains the same.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43696
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 13 Dec 2014 14:01:26 +0000 (14:01 +0000)]
scripts/config: fix segfault introduced in r43652
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43695
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 13 Dec 2014 11:57:14 +0000 (11:57 +0000)]
build: ensure tools are built before building the toolchain
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43693
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 13 Dec 2014 11:55:59 +0000 (11:55 +0000)]
realview: drop old kernel configs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43692
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 13 Dec 2014 11:55:49 +0000 (11:55 +0000)]
au1000: remove leftover 3.3 kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43691
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 13 Dec 2014 11:55:41 +0000 (11:55 +0000)]
au1000: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43690
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 13 Dec 2014 11:55:32 +0000 (11:55 +0000)]
rb532: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43689
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 13 Dec 2014 11:55:24 +0000 (11:55 +0000)]
at91: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43688
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 13 Dec 2014 11:55:11 +0000 (11:55 +0000)]
brcm2708: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43687
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 13 Dec 2014 11:55:04 +0000 (11:55 +0000)]
ixp4xx: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43686
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 13 Dec 2014 11:54:57 +0000 (11:54 +0000)]
lantiq: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43685
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 13 Dec 2014 11:54:49 +0000 (11:54 +0000)]
mpc85xx: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43684
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sat, 13 Dec 2014 08:08:30 +0000 (08:08 +0000)]
netlogic: fix XLR network driver build
Backport an upstream submission to fix xlr_net
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43682
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sat, 13 Dec 2014 08:07:03 +0000 (08:07 +0000)]
ramips:Add support for Aigale Ai-BR100
Aigale Ai-BR100 is a router with mt7620a soc.
There are only 2 lights on the board (WAN and WLAN) so I used the wlan light as the status led.
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43681
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sat, 13 Dec 2014 08:06:22 +0000 (08:06 +0000)]
mxs: indention and whitespace fixes
Align this file with the style of most other modules.mk.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43680
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sat, 13 Dec 2014 08:06:01 +0000 (08:06 +0000)]
ar71xx: add an extra check on board_name for ath10k firmware patchs
It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43679
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sat, 13 Dec 2014 08:04:54 +0000 (08:04 +0000)]
oxnas: fix gpio-fan on kd20
define speed-map and include kmod-hwmon-gpiofan in kd20 profile
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43678
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sat, 13 Dec 2014 08:02:52 +0000 (08:02 +0000)]
oxnas: also make use of the GPIO poweroff driver
Works great to power-off the kd20 ;)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43677
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sat, 13 Dec 2014 08:00:22 +0000 (08:00 +0000)]
kernel/generic: remove some left-over garbage from ledtrig patch
cosmetics. clean a style issue introduced by r43674.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43676
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 12 Dec 2014 20:24:33 +0000 (20:24 +0000)]
oxnas: use libata ledtrig support for kd20 hdd leds
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43675
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 12 Dec 2014 20:24:21 +0000 (20:24 +0000)]
kernel/generic: add ledtrig support to libata
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43674
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 12 Dec 2014 20:24:13 +0000 (20:24 +0000)]
oxnas: clean up default package selection
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43673
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 12 Dec 2014 18:28:13 +0000 (18:28 +0000)]
kernel.mk: Handle the x86_64 LINUX_KARCH case
x64 is handled by the x86 architecture in Linux, add a case for it in
LINUX_KARCH.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43672
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 12 Dec 2014 18:28:03 +0000 (18:28 +0000)]
kernel.mk: Refactor LINUX_KARCH affectation
Switch to a dumber implementation that will be easier to maintain in the long
run, with only if statements instead of having nested subst calls.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43671
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 12 Dec 2014 17:14:14 +0000 (17:14 +0000)]
kirkwood: Iomega ix2-200: wire up the GPIO poweroff driver in the DTS file
Signed-off-by: Richard Kunze <richard.kunze@web.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43670
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 12 Dec 2014 17:01:57 +0000 (17:01 +0000)]
gcc: don't clobber stamp-bits with a symlink to itself
Several versions of gcc have an issue in libstdc++v3 where the build may
clobber stamp-bits with a link to itself. This doesn't manifest itself
on all systems. On several Ubuntu systems, this doesn't appear to be a
problem, but it is an issue on Fedora 16 systems.
To fix the issue, we'll simply filter out stamp-bits from the symlinks
to be generated.
Note: gcc 4.4.7 is unaffected by this issue, so no fix is necessary
there.
Signed-off-by: John Szakmeister <john@szakmeister.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43669
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 12 Dec 2014 16:23:29 +0000 (16:23 +0000)]
ar8216: enable cpu port to receive arp and broadcast frames for ar8236
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43668
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 12 Dec 2014 16:17:31 +0000 (16:17 +0000)]
ralink: fix lenovo y1 wan port mapping
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43667
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 12 Dec 2014 16:17:24 +0000 (16:17 +0000)]
iwinfo: bump to latest git HEAD
http://patchwork.ozlabs.org/patch/420128/
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43666
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 12 Dec 2014 16:17:13 +0000 (16:17 +0000)]
oxnas: build S-ATA driver as a module
From: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43665
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 12 Dec 2014 16:17:03 +0000 (16:17 +0000)]
ralink: make uartf functional on AWM002
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43664
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 12 Dec 2014 16:16:57 +0000 (16:16 +0000)]
oxnas: use u-boot.bin in KDIR
This fixes building *u-boot-initramfs.bin images using ImageBuilder
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43663
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 12 Dec 2014 16:16:45 +0000 (16:16 +0000)]
uboot-oxnas: install u-boot.bin also to KERNEL_BUILD_DIR
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43662
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Fri, 12 Dec 2014 16:11:17 +0000 (16:11 +0000)]
sunxi: fix led on bananapi
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43661
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 12 Dec 2014 14:52:29 +0000 (14:52 +0000)]
igmpproxy: do not attempt to ifstatus error messages as json
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43660
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 12 Dec 2014 14:52:24 +0000 (14:52 +0000)]
igmpproxy: do not start instance if no upstream interface is available
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43659
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 12 Dec 2014 14:52:18 +0000 (14:52 +0000)]
igmpproxy: fix init script indentation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43658
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Fri, 12 Dec 2014 13:37:21 +0000 (13:37 +0000)]
mxs: allow bootloader to pass kernel cmdline
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43657
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Fri, 12 Dec 2014 13:18:29 +0000 (13:18 +0000)]
mxs: change mxs-lradc module to depend on kmod-iio-core instead of hardcoding
Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43656
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 12 Dec 2014 12:37:51 +0000 (12:37 +0000)]
scripts/config: remove debug statement
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43655
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 12 Dec 2014 12:35:23 +0000 (12:35 +0000)]
scripts/download.pl: add support for adding mirrors through an environment variable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43654
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 12 Dec 2014 12:33:34 +0000 (12:33 +0000)]
busybox: include config files relative to the main Config.in (#18522)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43653
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 12 Dec 2014 12:29:58 +0000 (12:29 +0000)]
scripts/config: support includes relative to the currently processed file
When the initial glob() attempt on a path specified with "source" statement
yields no result, then retry the globbing on the same path with the directory
part of the currently processed file prepended.
This allows us to reference Config.in files relative to their parent instead
of relative to the top dir.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43652
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Fri, 12 Dec 2014 12:14:40 +0000 (12:14 +0000)]
mxs: add i2c and spi packages to profiles
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43651
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Fri, 12 Dec 2014 12:01:39 +0000 (12:01 +0000)]
mxs: fix automatic status led detection
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43650
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Fri, 12 Dec 2014 11:43:56 +0000 (11:43 +0000)]
mxs: update dts file for Duckbill
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43649
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Fri, 12 Dec 2014 11:39:22 +0000 (11:39 +0000)]
mxs: i2c changes
- add package for i2c module
- remove i2c debug
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43648
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Fri, 12 Dec 2014 11:10:04 +0000 (11:10 +0000)]
mxs: add kernel module for spi interface
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43647
3c298f89-4303-0410-b956-
a3cf2f4a3e73
wigyori [Fri, 12 Dec 2014 11:03:55 +0000 (11:03 +0000)]
mxs: make boardname consistent with other targets
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43646
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Fri, 12 Dec 2014 09:39:07 +0000 (09:39 +0000)]
netifd: Set source IP for DHCP static routes as well
Commit
ce92f6650bd8a86db04c7a6cbb58e7fdb200a7e6 added source IP support
for DHCP default routes. As a side effect of this change the default route
could be present twice in netifd (once with source IP set and once with
source IP unset) if it was sent by the server in both the router and static
route options. Therefore add source IP support as well for static routes as this
case was not considered. Additional remove unused parameter type.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43645
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 12 Dec 2014 07:48:01 +0000 (07:48 +0000)]
amazon: remove leftover folders
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43644
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Thu, 11 Dec 2014 23:29:07 +0000 (23:29 +0000)]
kernel: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43643
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Thu, 11 Dec 2014 23:29:04 +0000 (23:29 +0000)]
kirkwood: sort 110-nas profile
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43642
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 11 Dec 2014 22:27:56 +0000 (22:27 +0000)]
au1000: revert 43626 due to syntax errors
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43641
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 11 Dec 2014 20:41:51 +0000 (20:41 +0000)]
oxnas: use ARM BCJ filter for XZ decompression
Restoring the config for kernel 3.14 didn't contain that change already
made to config-3.18.
It is needed to make squashfs in the kernel match the compression settings
for ARCH=arm in the framework.
If set to ARMTHUMB, boot fails due to squashfs being unreadable if the
filesystem was generated for wth ARM BCJ filter.
in include/image.mk: BCJ_FILTER:=-Xbcj $(LINUX_KARCH)
Thus the ARM filter is used for all ARM targets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43640
3c298f89-4303-0410-b956-
a3cf2f4a3e73
projects / openwrt.git / log