juhosg [Wed, 29 Aug 2012 10:37:38 +0000 (10:37 +0000)]
ramips: Add switch setup to uci network defaults
Add switch setup to uci network defaults.
The 'lan' attribute is used to decide into which vlan to put the
port.
Currently 'disable' is never set, but the intention is to use this
for devices like the 8devices Carambola, which only has two ports
hooked up to the SoC.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33300
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 29 Aug 2012 10:37:36 +0000 (10:37 +0000)]
ramips: Add swconfig support to ramips_esw.c
Add swconfig support to ramips_esw.c
This patch adds swconfig support for ramips_esw:
Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external
rtl8366rb on internal port 5).
I've made sure that in the enable_vlan=0 case it behaves like a dumb
switch, so external switches should work fine with vlans and
verified this on the WL-351.
The current state shown by swconfig is always read directly from HW
registers, new settings only show after 'swconfig dev rt305x set apply'.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33299
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 29 Aug 2012 10:37:35 +0000 (10:37 +0000)]
ramips: ramips_esw.c indentation cleanup
Minor indentation cleanup.
Prepare for the main swconfig patch by cleaning up indentation a bit.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33298
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 29 Aug 2012 10:37:33 +0000 (10:37 +0000)]
mac80211/rt2800: integrate cosmetic changes in rt3352 support
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33297
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 29 Aug 2012 10:37:32 +0000 (10:37 +0000)]
uboot-envtools: add configration for ramips devices
uboot-env settings for ALL0239-3G, ALL0256N, ALL5002.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33296
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 29 Aug 2012 10:37:30 +0000 (10:37 +0000)]
ar71xx: image: fix Profile name for TL-WA701 (closes #12094)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33295
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 29 Aug 2012 10:11:55 +0000 (10:11 +0000)]
ar71xx: Buffalo WZR-HP-AG300H LED support
An improved LED support for Buffalo WZR-HP-AG300H.
There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.
[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33294
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 29 Aug 2012 10:10:46 +0000 (10:10 +0000)]
iwinfo: add hwinfo for Rt3050 and maintain alphabetic order
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33293
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 29 Aug 2012 10:08:30 +0000 (10:08 +0000)]
[openssl] revert threadsafe patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33292
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 29 Aug 2012 10:07:08 +0000 (10:07 +0000)]
[package] ppp: introduce "authfail" option which specifies whether pppd should attempt to re-authenticate after a failed PAP/CHAP auth
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33291
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 29 Aug 2012 08:16:34 +0000 (08:16 +0000)]
ath9k: add fix to improve reliability of powersave clients
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33290
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 29 Aug 2012 08:16:31 +0000 (08:16 +0000)]
mac80211: reorganize patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33289
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 27 Aug 2012 18:09:57 +0000 (18:09 +0000)]
gemini: fix bus ids for PHY devices (closes: #12082)
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33288
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 27 Aug 2012 14:55:38 +0000 (14:55 +0000)]
ar71xx: add profile for Allnet devices
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33287
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 27 Aug 2012 14:55:37 +0000 (14:55 +0000)]
ar71xx: generate image for ALL0315N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33286
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 27 Aug 2012 14:55:36 +0000 (14:55 +0000)]
ar71xx: sysupgrade for the ALL0315N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33285
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 27 Aug 2012 14:55:35 +0000 (14:55 +0000)]
ar71xx: rename all0258n.sh to allnet.sh
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33284
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 27 Aug 2012 14:55:33 +0000 (14:55 +0000)]
uboot-envtools: add configuration for ALL0315N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33283
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 27 Aug 2012 14:55:32 +0000 (14:55 +0000)]
ar71xx: detect ALL0315N board
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33282
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 27 Aug 2012 14:55:31 +0000 (14:55 +0000)]
ar71xx: add support for the Allnet ALL0315N board
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33281
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 27 Aug 2012 14:55:26 +0000 (14:55 +0000)]
ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33280
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 27 Aug 2012 12:23:25 +0000 (12:23 +0000)]
mac80211: fix a crash on accessing stale skb->dev references
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33279
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 27 Aug 2012 11:10:36 +0000 (11:10 +0000)]
ath9k: fix PA predistortion training, fixes hang issues and most likely also fixes #12073
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33278
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 27 Aug 2012 11:07:23 +0000 (11:07 +0000)]
ath9k: add a patch to fix ASPM related issues
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33277
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 26 Aug 2012 20:47:39 +0000 (20:47 +0000)]
madwifi: add mirror md5sum to fix issue with the disappeared svn repo (#12084)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33276
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 26 Aug 2012 09:27:56 +0000 (09:27 +0000)]
generic: add support for the EON EN25Q64 SPI flash chip
It is used in some TL-WDR4310 devices. Closes #12077.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33275
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 26 Aug 2012 08:15:11 +0000 (08:15 +0000)]
ar71xx: unbreak building images for TL-WR1041N-v2, TL-WR2543N
Commit
48788063266ad99bdab03b53cbe7e1a564c2d9b3 (r33251) introduced a
regression with board= kernel command line parameter incorrectly
initialised.
The faulty builds propogated to the snapshots download area. This makes
the device unbootable and TP-Link users have to attach the serial to
recover.
Here is the q&d way i used to identify MIPS boards that didn't have a
corresponding entry in the image/Makefile:
for i in `find ../files/arch/mips/ath79/ -type f -exec cat {} \; \
| sed -n '/MIPS_MACHINE/ { s/^[^"]*"\([^"]*\)".*$/\1/; p; }'`; do
grep -q ,$i, Makefile || echo $i;
done > missing-boards.new
Reported-by: Casper on IRC
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33274
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 26 Aug 2012 06:31:04 +0000 (06:31 +0000)]
[openssl] add missin -lpthread to the util - build bots spotted this
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33273
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 26 Aug 2012 06:30:37 +0000 (06:30 +0000)]
ar71xx: image: fix TL-WR1043ND board id (#12079)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33272
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 24 Aug 2012 10:01:01 +0000 (10:01 +0000)]
package/util-linux: don't lie about availability of '%ms' scanf modifier
Use a patch from gentoo which allows building libmount even
if the C library does not supports %ms/%as.
See: https://bugs.gentoo.org/406303
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33270
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 24 Aug 2012 09:58:42 +0000 (09:58 +0000)]
[openssl] add safethread
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33269
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 24 Aug 2012 06:15:06 +0000 (06:15 +0000)]
[kirkwood] Enable eSATA sheevaplug
OpenWRT runs in a eSATA sheevaplug like a charm. This patch just enables
CONFIG_MACH_ESATA_SHEEVAPLUG so the proper MACHINE_START definition
is compiled in.
Signed-off-by: Unai Uribarri <unaiur@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33266
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 14:27:36 +0000 (14:27 +0000)]
package/uboot-envtools: always install the fw_setenv symlink
It is required by sysupgrade on some boards, and it is only
working if a suitable /etc/fw_env.config is present on the
target board. If an user creates such configuration he/she
should know that it is a dangerous tool. The devices can
be bricked in several other ways anyway.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33265
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 13:17:47 +0000 (13:17 +0000)]
ar71xx: image: group and sort {Single,Multi}Profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33264
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 13:14:35 +0000 (13:14 +0000)]
ar71xx: image: group and sort mtdlayout definitions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33263
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 13:11:25 +0000 (13:11 +0000)]
ar71xx: image: use the MultiProfile helper for the Madwifi profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33262
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 13:08:15 +0000 (13:08 +0000)]
ar71xx: image: automatically build a list of SingleProfiles
Use that for Default/Minimal profiles.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33261
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 13:05:05 +0000 (13:05 +0000)]
ar71xx: image: use the new helpers for the ZyXEL images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33260
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 13:01:55 +0000 (13:01 +0000)]
ar71xx: image: use the new helpers for the Zcomax images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33259
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:58:45 +0000 (12:58 +0000)]
ar71xx: image: use the new helpers for the WRT400 images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33258
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:55:35 +0000 (12:55 +0000)]
ar71xx: image: use the new helpers for the WZRHPG30XNH images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33257
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:52:25 +0000 (12:52 +0000)]
ar71xx: image: use the new helpers for the WHRHPG300N images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33256
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:49:15 +0000 (12:49 +0000)]
ar71xx: image: use the new helpers for the UBNTXM images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33255
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:46:06 +0000 (12:46 +0000)]
ar71xx: image: use the new helpers for the UBNT images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33254
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:42:56 +0000 (12:42 +0000)]
ar71xx: image: use the new helpers for the TPLINKOLD images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33253
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:39:46 +0000 (12:39 +0000)]
ar71xx: image: use the new helpers for the TPLINK-LZMA images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33252
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:36:35 +0000 (12:36 +0000)]
ar71xx: image: use the new helpers for the TPLINK images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33251
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:33:25 +0000 (12:33 +0000)]
ar71xx: image: use the new helpers for the Planex images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33250
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:30:15 +0000 (12:30 +0000)]
ar71xx: image: use the new helpers for the PB4X images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33249
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:27:06 +0000 (12:27 +0000)]
ar71xx: image: use the new helpers for the OpenMesh images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33248
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:23:56 +0000 (12:23 +0000)]
ar71xx: image: use the new helpers for the Netgear images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33247
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:20:46 +0000 (12:20 +0000)]
ar71xx: image: use the new helpers for the MyLoader images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33246
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:17:36 +0000 (12:17 +0000)]
ar71xx: image: use the new helpers for the DIR825B1 images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33245
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:14:26 +0000 (12:14 +0000)]
ar71xx: image: use the new helpers for the CyberTAN images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33244
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:11:17 +0000 (12:11 +0000)]
ar71xx: image: use the new helpers for the Cameo933x images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33243
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:08:07 +0000 (12:08 +0000)]
ar71xx: image: use the new helpers for the Cameo913x images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33242
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:04:57 +0000 (12:04 +0000)]
ar71xx: image: use the new helpers for the Cameo7240 images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33241
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 12:01:47 +0000 (12:01 +0000)]
ar71xx: image: use the new helpers for the AthGzip images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33240
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 11:58:37 +0000 (11:58 +0000)]
ar71xx: image: use the new helpers for the AthLzma images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33239
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 11:55:27 +0000 (11:55 +0000)]
ar71xx: image: use the new helpers for the ALFA images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33238
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 11:52:18 +0000 (11:52 +0000)]
ar71xx: image: add a few helper functions
These functions will be used to simplify the Makefile.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33237
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 23 Aug 2012 11:49:07 +0000 (11:49 +0000)]
ar71xx: image: pass mtdlayout as a separate parameter for the ALFA template
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33236
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Wed, 22 Aug 2012 21:54:06 +0000 (21:54 +0000)]
[brcm47xx] update profiles
* add profile for BCM4705 based SoC using tg3 instead of b44
* remove redundant 105-Atheros.mk
* reorder
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33235
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Aug 2012 20:18:44 +0000 (20:18 +0000)]
ar71xx: add profile and build image for the TEW-712BR
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33234
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Aug 2012 20:15:34 +0000 (20:15 +0000)]
tools/firmware-utils: add a new tool for TEW-712BR firmware generation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33233
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Aug 2012 20:12:24 +0000 (20:12 +0000)]
ar71xx: TEW-712BR user space support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33232
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Aug 2012 20:09:13 +0000 (20:09 +0000)]
ar71xx: add support for the TRENDnet TEW-712BR board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33231
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Aug 2012 19:11:10 +0000 (19:11 +0000)]
ar71xx: fix serial clock calculation on AR933x
Closes #12031.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33230
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Aug 2012 17:55:12 +0000 (17:55 +0000)]
ramips: fix board parameter for the NBG-419N (#12061)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33229
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 22 Aug 2012 15:07:32 +0000 (15:07 +0000)]
[target] derive system from hostcc to allow building inside a chroot
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33228
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Aug 2012 12:42:59 +0000 (12:42 +0000)]
ar71xx: fix comment style in mach-tl-wr2543n.c
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33227
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Aug 2012 12:39:46 +0000 (12:39 +0000)]
ar71xx: fix mtd layout of the AP113
The 'mtdparts=' prefix and the name of the flash device is missing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33226
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Aug 2012 12:36:35 +0000 (12:36 +0000)]
ramips: add profile for Allnet devices
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33225
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Aug 2012 12:33:22 +0000 (12:33 +0000)]
ar71xx: add ALL0305 board alias
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33224
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Aug 2012 09:46:30 +0000 (09:46 +0000)]
ramips: add RSSI leds for uci-defaults for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33220
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 22 Aug 2012 09:43:18 +0000 (09:43 +0000)]
ar71xx: add support for TP-Link TL-WDR3600
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.
[juhosg: remove the custom machine type, change the board name instead]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33219
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 22 Aug 2012 09:22:38 +0000 (09:22 +0000)]
[tools] tools/firmware-utils/ptgen option to use MB rounding
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33218
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 22 Aug 2012 09:19:11 +0000 (09:19 +0000)]
lantiq: dsl: fix status polling loop
doesn't need to do it 20 times all the time, missing loop condition check
Signed-off-by: Conor O'Gorman <i@conorogorman.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33217
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 22 Aug 2012 09:14:42 +0000 (09:14 +0000)]
dnsmasq: Set prefix on-link bit in RAs
This is fix an issue with dnsmasq's RA that does not set the "on-link" bit, making all local IPv6 traffic go to the router then to the destination host, not directly to each other.
patch is from dnsmasq git
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33216
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 22 Aug 2012 09:10:24 +0000 (09:10 +0000)]
add led defintion for the WR2543 5GHz WLAN LED
Signed-off-by: Andy Leiserson <andy@leiserson.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33215
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sun, 19 Aug 2012 15:59:24 +0000 (15:59 +0000)]
[package] comgt: handle service mode for Huawai modems (#12039)
It seems that the comgt package does not handle the Huawei 3G USB dongle E176 correctly (and probably other Huawei dongles too). My dongle appears as ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem and 3G/UMTS
connections work well. However, no connection is established if only 2G/GPRS is available: the pppd chat script fails with NO CARRIER although the dongle is registered to the network (via 2G). As outlined in this wiki or this
blog, Huawei chips use the AT^SYSCFG command to set 2G or 3G mode, which is not implemented in comgt at the moment. Thus I wrote a patch for /lib/network/3g.sh which adds support for the "service" option in the network
configuration with Huawei dongles. By default (if no "service" option is specified) also 2G is used when 3G is unavailable. The Huawei dongle is detected analogously to other chips (the output of gcom -d /dev/ttyUSB0 -s
/etc/gcom/getcardinfo.gcom is scanned for huawei).
Some further information: The AT^SYSCFG command seems to be respected only once after the dongle is attached (or after the host is powered up). Resetting the dongle seems to render the serial port unusable in some cases.
However, the patch sets a useful mode by default which should cover most use cases (3G preferred, but 2G allowed) and if 3G-only or 2G-only mode is required the device can be power cycled.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33212
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sat, 18 Aug 2012 15:45:18 +0000 (15:45 +0000)]
[brcm47xx] remove unused file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33210
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sat, 18 Aug 2012 14:08:35 +0000 (14:08 +0000)]
[brcm47xx] make brcm47xx build only with bcma or only with ssb support.
There are some ifdefs missing so when only ssb or only bcma was
selected in the kernel config it did not build.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33209
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sat, 18 Aug 2012 11:51:35 +0000 (11:51 +0000)]
[brcm47xx] update gpio patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33208
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 17 Aug 2012 17:56:07 +0000 (17:56 +0000)]
ramips: add board alias for the ALL0239-3G
Generate image for the ALL0239-3G which can be flashed through the
chipset-vendor SDK based firmware's web-interface and bootloader.
The bootloader seems to ignore uImage checksum errors, but does complain about
them once the 0xDEADC0DE was replaced by an actual JFFS2 page.
I'm working on implementing fixtrx for uImage in the mtd package to solve this.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33206
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 17 Aug 2012 17:56:05 +0000 (17:56 +0000)]
ramips: add support for D-Link DIR-615 H1
rt2x00 still needs some patching as the radio doesn't come to life.
Installation via webflash.
[juhosg: fix whitespace issues, remove rt305x_register_usb
from machine setup because the board has no USB port]
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33205
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 17 Aug 2012 17:56:02 +0000 (17:56 +0000)]
tools/firmware-utils: add tool for DIR-651-H1 firmware generation
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33204
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Aug 2012 07:11:30 +0000 (07:11 +0000)]
ar71xx: setup WLAN LED for the TL-WA901ND v2
Closes #11889.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33202
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 16 Aug 2012 01:24:46 +0000 (01:24 +0000)]
[package] acx-mac80211: depend on mipsel, not mips since AR7 is low endian
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33201
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 15 Aug 2012 20:22:35 +0000 (20:22 +0000)]
iwinfo: add hwinfo for Rt3052
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33200
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 15 Aug 2012 16:25:38 +0000 (16:25 +0000)]
iwinfo: add hw info support for Rt3xxx SoCs
This takes the device_id and subsystem_id from the EEPROM, I'll add
the info for other Rt3xxx chips in the next days.
[jow: minor whitespace changes]
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33199
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 15 Aug 2012 14:49:59 +0000 (14:49 +0000)]
ath5k: add back a patch for fixing eeprom rate power parsing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33198
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 15 Aug 2012 13:31:31 +0000 (13:31 +0000)]
[buildroot] make static host utility linking default to off
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33197
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 15 Aug 2012 13:28:26 +0000 (13:28 +0000)]
[iamgebuilder] use bundle-libraries.sh to install required host utilities into imagebuilder staging tree
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33196
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 15 Aug 2012 13:28:23 +0000 (13:28 +0000)]
[scripts] add a helper script to bundle required libraries for host utilities
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33195
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Aug 2012 13:27:55 +0000 (13:27 +0000)]
package/om-watchdog: start service only on the om2p/om2p-lc boards on ar71xx
If the package is installed, it starts the watchdog daemon
on every ar71xx based board.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33194
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Aug 2012 13:26:51 +0000 (13:26 +0000)]
generic: extend pci_isable_usb_common_quirks patch
Fixes the following build error:
SYSMAP System.map
Building modules, stage 2.
MODPOST 48 modules
ERROR: "usb_enable_xhci_ports" [drivers/usb/host/ehci-hcd.ko] undefined!
ERROR: "usb_is_intel_switchable_xhci" [drivers/usb/host/ehci-hcd.ko] undefined!
make[6]: *** [__modpost] Error 1
make[5]: *** [modules] Error 2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33193
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 15 Aug 2012 09:20:12 +0000 (09:20 +0000)]
[x86] set xen images to gzip compression, fixes #11970
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33192
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Tue, 14 Aug 2012 16:19:30 +0000 (16:19 +0000)]
[mcs814x] MCS8140 actually selects CPU_ARM926T
Should make inclusion for other MCS814x SoCs easier
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33188
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 14 Aug 2012 13:58:49 +0000 (13:58 +0000)]
iwinfo: add some Atheros cards
These are two Atheros modules we are using, just for the cosmetics to make them
show up with the proper names in LuCI.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33186
3c298f89-4303-0410-b956-
a3cf2f4a3e73
projects / openwrt.git / log