openwrt.git
4 years agomac80211: install new firmware for ath9k-htc on target
hauke [Wed, 2 Dec 2015 20:32:11 +0000 (20:32 +0000)]
mac80211: install new firmware for ath9k-htc on target

For quite some time new firmware for ath9k-htc devices
is available in
http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/ath9k_htc/

Moreover ath9k-htc kernel driver expects this new v1.4
firmware to exist in /lib/firmware/ath9k_htc.

What happens currently:
---------------------------->8--------------------------
[    7.830000] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw
requested
[    7.840000] usb 1-1: Direct firmware load for
ath9k_htc/htc_9271-1.4.0.fw failed with error -2
[    7.850000] usb 1-1: Falling back to user helper
[    7.870000] usbcore: registered new interface driver ath9k_htc
[    7.880000] firmware ath9k_htc!htc_9271-1.4.0.fw:
firmware_loading_store: map pages failed
[    7.890000] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[    8.200000] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size:
50980
[    8.440000] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33
credits
[   10.720000] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3
[   10.740000] ath9k_htc 1-1:1.0: FW RMW support: Off
[   10.760000] ieee80211 phy0: Atheros AR9271 Rev:1
---------------------------->8--------------------------

And with that patch new firmware is used instead:
---------------------------->8--------------------------
[   33.920000] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw
requested
[   34.230000] usb 1-1: ath9k_htc: Transferred FW:
ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[   34.480000] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33
credits
[   34.740000] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.4
[   34.750000] ath9k_htc 1-1:1.0: FW RMW support: On
---------------------------->8--------------------------

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47693 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobcm53xx: switch to ucidef_add_switch_ports()
jow [Wed, 2 Dec 2015 18:51:12 +0000 (18:51 +0000)]
bcm53xx: switch to ucidef_add_switch_ports()

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47692 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agompc85xx: fix up m25p80 device id (#21286)
nbd [Wed, 2 Dec 2015 17:35:37 +0000 (17:35 +0000)]
mpc85xx: fix up m25p80 device id (#21286)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47691 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agolantiq: fix up m25p80 device ids (#20975)
nbd [Wed, 2 Dec 2015 17:20:39 +0000 (17:20 +0000)]
lantiq: fix up m25p80 device ids (#20975)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47690 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agotools: make-ext4fs: explicitely request C collation for sorting
jow [Wed, 2 Dec 2015 16:10:09 +0000 (16:10 +0000)]
tools: make-ext4fs: explicitely request C collation for sorting

Do not rely on the system default collaction when sorting directory entries
but explicitely request "C" collation.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47689 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobcm53xx: update PCIe driver
hauke [Wed, 2 Dec 2015 15:24:53 +0000 (15:24 +0000)]
bcm53xx: update PCIe driver

This updates the iProc PCIe driver to the version currently submitted
for kernel 4.5.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47688 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobcm53xx: update SMP patches
hauke [Wed, 2 Dec 2015 15:23:08 +0000 (15:23 +0000)]
bcm53xx: update SMP patches

Broadcom submitted new SMP patches for this SoC to upstream Linux, add
them to OpenWrt.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47687 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobcm53xx: activate workarounds for erratas
hauke [Wed, 2 Dec 2015 15:19:29 +0000 (15:19 +0000)]
bcm53xx: activate workarounds for erratas

This also deactivates some workaround for erratas only seen in older
CPU cores and L2 cores not used in this SoC.

This partly reverts commit r44947.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47686 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobcm53xx: move patch 132-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch
hauke [Wed, 2 Dec 2015 15:14:58 +0000 (15:14 +0000)]
bcm53xx: move patch 132-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch

This patch is currently placed directly behind the SMP patches and has
nothing to do with SMP, move it to an other position.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47685 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agonetifd: update to the latest version, fixes an issue with moving a wifi iface to...
nbd [Wed, 2 Dec 2015 13:52:08 +0000 (13:52 +0000)]
netifd: update to the latest version, fixes an issue with moving a wifi iface to a different network

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47683 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobrcm47xx: add Netgear WN2500RP support
rmilecki [Wed, 2 Dec 2015 09:24:52 +0000 (09:24 +0000)]
brcm47xx: add Netgear WN2500RP support

We generate V1 image only for now. We lack buttons support for V2.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47682 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agompc85xx: fix typo added in r47676
jow [Tue, 1 Dec 2015 09:22:53 +0000 (09:22 +0000)]
mpc85xx: fix typo added in r47676

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47681 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agompc85xx: record board id and model name in /etc/board.json
jow [Mon, 30 Nov 2015 12:49:19 +0000 (12:49 +0000)]
mpc85xx: record board id and model name in /etc/board.json

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47680 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobase-files: uci-defaults-new, config_generate: allow force tagged cpu ports
jow [Mon, 30 Nov 2015 12:32:12 +0000 (12:32 +0000)]
base-files: uci-defaults-new, config_generate: allow force tagged cpu ports

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47679 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agomwlwifi: update to latest revision, fixes a kernel panic
kaloz [Mon, 30 Nov 2015 11:57:32 +0000 (11:57 +0000)]
mwlwifi: update to latest revision, fixes a kernel panic

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47677 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agompc85xx: convert to ucidef_add_switch_ports()
jow [Mon, 30 Nov 2015 11:09:29 +0000 (11:09 +0000)]
mpc85xx: convert to ucidef_add_switch_ports()

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47676 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobase-files: uci-defaults-new: only emit force_link for additional ifaces
jow [Mon, 30 Nov 2015 10:55:43 +0000 (10:55 +0000)]
base-files: uci-defaults-new: only emit force_link for additional ifaces

Only se4t the force_link property for non-lan, non-wan ifaces as it is
unnecessary in the default cases.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47675 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agomvebu: switch network and led config defaults to board detection framework
jow [Mon, 30 Nov 2015 10:43:31 +0000 (10:43 +0000)]
mvebu: switch network and led config defaults to board detection framework

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47674 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobase-files: uci-defaults-new: fix unquoted variables
jow [Mon, 30 Nov 2015 10:43:18 +0000 (10:43 +0000)]
base-files: uci-defaults-new: fix unquoted variables

Properly quote variables in ucidef_set_interface_lan() and
ucidef_set_interface_lan(), otherwise interfaces with multiple devices
are not properly written into the configuration.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47673 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agoar71xx: record board id and model name in /etc/board.json
jow [Mon, 30 Nov 2015 10:17:20 +0000 (10:17 +0000)]
ar71xx: record board id and model name in /etc/board.json

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47672 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobase-files: uci-defaults-new: add board id and name helpers
jow [Mon, 30 Nov 2015 10:17:05 +0000 (10:17 +0000)]
base-files: uci-defaults-new: add board id and name helpers

Add ucidef_set_board_id() and ucidef_set_model_name() procedures to store
model information in the board.json file.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47671 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agoramips: remove duplicate patch
blogic [Sat, 28 Nov 2015 23:26:03 +0000 (23:26 +0000)]
ramips: remove duplicate patch

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47670 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agoprocd: update to latest git HEAD
blogic [Sat, 28 Nov 2015 23:25:04 +0000 (23:25 +0000)]
procd: update to latest git HEAD

this adds a lot of ujail cleanups

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47669 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agomac80211: rt2x00: fix WARN_ON_ONCE() caused by inbalanced set/clear of beacon enable bit
blogic [Sat, 28 Nov 2015 23:24:59 +0000 (23:24 +0000)]
mac80211: rt2x00: fix WARN_ON_ONCE() caused by inbalanced set/clear of beacon enable bit

Signed-off-by: evaxige <evaxige@qq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47668 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agoramips: adapt VoCore to new second spi device code
blogic [Sat, 28 Nov 2015 23:24:52 +0000 (23:24 +0000)]
ramips: adapt VoCore to new second spi device code

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47667 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agoramips: add second SPI clocks
blogic [Sat, 28 Nov 2015 23:24:40 +0000 (23:24 +0000)]
ramips: add second SPI clocks

These clocks were missing in the changes introduced in r47573-47580

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47666 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agokernel: add fix for missing include in spi-nor.h (#20973)
rmilecki [Thu, 26 Nov 2015 17:13:05 +0000 (17:13 +0000)]
kernel: add fix for missing include in spi-nor.h (#20973)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47665 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agokernel: revert a faulty upstream commit that was added with the spi-nor/m25p80 backpo...
nbd [Thu, 26 Nov 2015 16:40:11 +0000 (16:40 +0000)]
kernel: revert a faulty upstream commit that was added with the spi-nor/m25p80 backport (fixes #20971)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47664 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agoar71xx: switch network and led defaults to board detection framework
jow [Thu, 26 Nov 2015 14:42:28 +0000 (14:42 +0000)]
ar71xx: switch network and led defaults to board detection framework

Also translate ucidef_add_switch_vlan() to ucidef_add_switch_ports() for better
switch topology mapping and improved default config generation.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47663 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agomwlwifi: update to latest version
kaloz [Thu, 26 Nov 2015 14:08:37 +0000 (14:08 +0000)]
mwlwifi: update to latest version

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47661 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobase-files: uci-defaults-new, config_generate: support for gpio leds
jow [Thu, 26 Nov 2015 13:53:06 +0000 (13:53 +0000)]
base-files: uci-defaults-new, config_generate: support for gpio leds

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47660 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobase-files: config_generate: regroup led generator code
jow [Thu, 26 Nov 2015 13:53:02 +0000 (13:53 +0000)]
base-files: config_generate: regroup led generator code

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47659 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobase-files: uci-defaults-new: remove ucidef_set_led_interface()
jow [Thu, 26 Nov 2015 12:46:09 +0000 (12:46 +0000)]
base-files: uci-defaults-new: remove ucidef_set_led_interface()

The only user was the hg255d board and config_generate did not even emit
proper uci for it.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47658 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agoramips: hg255d: replace ucidef_set_led_interface() with ucidef_set_led_netdev()
jow [Thu, 26 Nov 2015 12:46:04 +0000 (12:46 +0000)]
ramips: hg255d: replace ucidef_set_led_interface() with ucidef_set_led_netdev()

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47657 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobase-files: config_generate: support rssi leds
jow [Thu, 26 Nov 2015 12:04:43 +0000 (12:04 +0000)]
base-files: config_generate: support rssi leds

Add support for emitting rssi monitor and led configuration sections.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47656 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobase-files: uci-defaults-new: fix storing rssi leds and triggers in board.json
jow [Thu, 26 Nov 2015 12:04:38 +0000 (12:04 +0000)]
base-files: uci-defaults-new: fix storing rssi leds and triggers in board.json

Remove extra nesting of rssi leds in the led object and move rssi monitor
declaration to its own object.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47655 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobase-files: config_generate: reformat for better readability and quote variables
jow [Thu, 26 Nov 2015 12:04:32 +0000 (12:04 +0000)]
base-files: config_generate: reformat for better readability and quote variables

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47654 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobcm53xx: update bcm53xxspiflash to match spi-nor backported from 4.4-rc1
rmilecki [Thu, 26 Nov 2015 11:43:16 +0000 (11:43 +0000)]
bcm53xx: update bcm53xxspiflash to match spi-nor backported from 4.4-rc1

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47653 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 years agobase-files: uci-defaults-new: properly quote variables
jow [Thu, 26 Nov 2015 11:17:54 +0000 (11:17 +0000)]
base-files: uci-defaults-new: properly quote variables

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47652 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agolantiq: add dsl-vrx200-firmware-xdsl-b: add Annex B version of VRX200 DSL firmware
hauke [Wed, 25 Nov 2015 22:36:38 +0000 (22:36 +0000)]
lantiq: add dsl-vrx200-firmware-xdsl-b: add Annex B version of VRX200 DSL firmware

This adds the Annex B version of the VRX200 firmware.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47650 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agolantiq: dsl-vrx200-firmware-xdsl-a: rename to VRX200 and add annex a
hauke [Wed, 25 Nov 2015 22:33:17 +0000 (22:33 +0000)]
lantiq: dsl-vrx200-firmware-xdsl-a: rename to VRX200 and add annex a

This just renamed the package to indicate that this is the annex a version.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47649 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agobase-files: config_generate: handle switch port attributes and better group json_select
jow [Wed, 25 Nov 2015 15:43:50 +0000 (15:43 +0000)]
base-files: config_generate: handle switch port attributes and better group json_select

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47648 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agobase-files: config_generate: do not remove previously generated interfaces
jow [Wed, 25 Nov 2015 15:43:43 +0000 (15:43 +0000)]
base-files: config_generate: do not remove previously generated interfaces

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47647 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agobase-files: config_generate: properly handle multiple switches
jow [Wed, 25 Nov 2015 15:43:33 +0000 (15:43 +0000)]
base-files: config_generate: properly handle multiple switches

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47646 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agobase-files: uci-defaults-new: add ucidef_add_switch_port_attr() helper
jow [Wed, 25 Nov 2015 15:43:28 +0000 (15:43 +0000)]
base-files: uci-defaults-new: add ucidef_add_switch_port_attr() helper

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47645 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agobase-files: uci-defaults-new: whitespace cleanup
jow [Wed, 25 Nov 2015 15:43:21 +0000 (15:43 +0000)]
base-files: uci-defaults-new: whitespace cleanup

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47644 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agobase-files: uci-defaults-new: don't store switch attr numbers as strings
jow [Wed, 25 Nov 2015 15:43:15 +0000 (15:43 +0000)]
base-files: uci-defaults-new: don't store switch attr numbers as strings

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47643 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agogcc: make colors optional based on the GCC_COLORS env var
nbd [Wed, 25 Nov 2015 14:12:44 +0000 (14:12 +0000)]
gcc: make colors optional based on the GCC_COLORS env var

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47642 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoRevert "ar71xx: migrate led and network setup to board detection framework"
jow [Wed, 25 Nov 2015 11:53:59 +0000 (11:53 +0000)]
Revert "ar71xx: migrate led and network setup to board detection framework"

The board detect code needs more fixes in order to work properly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47641 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoralink: renable nand support
blogic [Tue, 24 Nov 2015 22:00:55 +0000 (22:00 +0000)]
ralink: renable nand support

CONFIG_MTK_MTD_NAND was incorrectly disabled by r47619.

Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47640 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agobase-files: config_generate: support autogenerating vlans
jow [Tue, 24 Nov 2015 21:16:38 +0000 (21:16 +0000)]
base-files: config_generate: support autogenerating vlans

Add support for generating vlans solely from the port layout description
given through ucidef_add_switch_ports().

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47639 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agobase-files: add ucidef_set_interface_wan() and ucidef_add_switch_ports()
jow [Tue, 24 Nov 2015 21:16:35 +0000 (21:16 +0000)]
base-files: add ucidef_set_interface_wan() and ucidef_add_switch_ports()

Add further helper functions to uci-defaults-new.sh for easier declarations
of complex switch layouts.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47638 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agolantiq: ltq-vdsl-app: update to version 4.16.6.3
blogic [Tue, 24 Nov 2015 20:41:30 +0000 (20:41 +0000)]
lantiq: ltq-vdsl-app: update to version 4.16.6.3

In this upstream dsl driver app version the autoboot is deactivated activate
it again.
In addition to the update this also fixes some build warnings and makes it
use the same configure option as used in Lantiq UGW.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47637 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agolantiq: ltq-vdsl-app: add dsl_cpe_pipe.sh
blogic [Tue, 24 Nov 2015 20:41:18 +0000 (20:41 +0000)]
lantiq: ltq-vdsl-app: add dsl_cpe_pipe.sh

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47636 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agolantiq: ltq-vdsl: update to version 4.16.6.3
blogic [Tue, 24 Nov 2015 20:41:07 +0000 (20:41 +0000)]
lantiq: ltq-vdsl: update to version 4.16.6.3

In addition to the update this also fixes some build warnings and makes it
use the same configure option as used in Lantiq UGW.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47635 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agolantiq: ltq-vdsl-mei: update to version 1.4.8.5
blogic [Tue, 24 Nov 2015 20:40:59 +0000 (20:40 +0000)]
lantiq: ltq-vdsl-mei: update to version 1.4.8.5

In addition to the update this also fixes some build warnings and makes it
use the same configure option as used in Lantiq UGW.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47634 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agolantiq: ltq-vdsl-mei: register char device automatically
blogic [Tue, 24 Nov 2015 20:40:49 +0000 (20:40 +0000)]
lantiq: ltq-vdsl-mei: register char device automatically

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47633 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agolantiq: ltq-vdsl-mei: add mei_cpe_drv_test application
blogic [Tue, 24 Nov 2015 20:40:40 +0000 (20:40 +0000)]
lantiq: ltq-vdsl-mei: add mei_cpe_drv_test application

This application helps to debug some internal problems in the MEI driver.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47632 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agolantiq: add dsl-vr9-firmware-xdsl
blogic [Tue, 24 Nov 2015 20:40:11 +0000 (20:40 +0000)]
lantiq: add dsl-vr9-firmware-xdsl

This adds the DSL firmware for the VR9/XRX200 SoCs.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47631 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agolantiq: ltq-ifxos: fix build warnings
blogic [Tue, 24 Nov 2015 20:39:59 +0000 (20:39 +0000)]
lantiq: ltq-ifxos: fix build warnings

This makes the build script use the same configure options as used by
Lantiq  UGW and fixes some warnings and cleans up some of the patches.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47630 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoqos-scripts: remove faulty fallback of the device variable to eth0 (#20834)
nbd [Tue, 24 Nov 2015 20:30:06 +0000 (20:30 +0000)]
qos-scripts: remove faulty fallback of the device variable to eth0 (#20834)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47629 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agolantiq: fix compile error
hauke [Tue, 24 Nov 2015 20:12:21 +0000 (20:12 +0000)]
lantiq: fix compile error

This fixes a problem introduced in r47624.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47628 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoramips: fix typo in image makefile (#18712)
nbd [Tue, 24 Nov 2015 19:29:56 +0000 (19:29 +0000)]
ramips: fix typo in image makefile (#18712)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47627 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agokernel: disable software protection bits for macronix flash chips at init
nbd [Tue, 24 Nov 2015 19:09:56 +0000 (19:09 +0000)]
kernel: disable software protection bits for macronix flash chips at init

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47626 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoath10k: fix memory allocation issues on platforms where DMA coherent memory is constr...
nbd [Tue, 24 Nov 2015 19:09:45 +0000 (19:09 +0000)]
ath10k: fix memory allocation issues on platforms where DMA coherent memory is constrained

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47625 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agokernel: update m25p80 in 4.1 to the latest version from 4.4-rc1
nbd [Tue, 24 Nov 2015 18:59:28 +0000 (18:59 +0000)]
kernel: update m25p80 in 4.1 to the latest version from 4.4-rc1

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47624 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agobase-files: show hint when JFFS2-partition is full and overlayfs mounted read-only
blogic [Tue, 24 Nov 2015 18:32:09 +0000 (18:32 +0000)]
base-files: show hint when JFFS2-partition is full and overlayfs mounted read-only

since r45833 and r45848 the overlayfs is automatically mounted read-only
(and blocks remounts as r/w) when JFFS2 is full. see ticket #19564

because of this normal file deletion is not possible anymore.
if a user logins interactively (e.g. SSH) show a hint for this,
that files must be removed in /overlay/upper/...

v2: fix subject line

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47623 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoar71xx: add GL-Domino Pi support V3
blogic [Tue, 24 Nov 2015 18:30:50 +0000 (18:30 +0000)]
ar71xx: add GL-Domino Pi support V3

This is the patch for GL-Domino Pi V3. Updated against the latest trunk.

Signed-off-by: alzhao<alzhao@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47622 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoar71xx: add GL-AR300 support V3
blogic [Tue, 24 Nov 2015 18:30:19 +0000 (18:30 +0000)]
ar71xx: add GL-AR300 support V3

This is the patch for GL-AR300 V3, tested against the latest trunk.

Signed-off-by: alzhao<alzhao@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47621 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoar71xx: add GL-AR150 support V3
blogic [Tue, 24 Nov 2015 18:29:59 +0000 (18:29 +0000)]
ar71xx: add GL-AR150 support V3

This is the 3rd version. Modified against the latest trunk.

Signed-off-by: alzhao<alzhao@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47620 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoralink: add support for netis WF-2881
blogic [Tue, 24 Nov 2015 18:29:26 +0000 (18:29 +0000)]
ralink: add support for netis WF-2881

netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN.
It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0.
The following patch adds support for this device.

this device only works on top of UBI.

Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons (reset button)
* ethernet switch and USB diag LEDs
* UART
* GPIOs
* sysupgrade

Tested and not working
* failsafe

Signed-off-by: YounJae Rho <luxflow@live.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47619 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agooxnas: set irq of usb&sata to cpu1
blogic [Tue, 24 Nov 2015 18:29:14 +0000 (18:29 +0000)]
oxnas: set irq of usb&sata to cpu1

V2:
The KD-20 also has USB 3.0.I modiy the set_irq_affinity usb 2 to set_irq_affinity ?hci_hcd 2 to bind usb 2.0&3.0 to cpu1.

Signed-off-by: Shonn Lu <countrysideboy@qq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47618 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoramips: add support for Youku YK1
blogic [Tue, 24 Nov 2015 18:29:02 +0000 (18:29 +0000)]
ramips: add support for Youku YK1

Changes since V1:
I resend this patch for current trunk.The former V1 patch is for CC branch.

Signed-off-by: Shonn Lu <countrysideboy@qq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47617 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoramips: add second spi master sysclk
blogic [Tue, 24 Nov 2015 18:28:54 +0000 (18:28 +0000)]
ramips: add second spi master sysclk

for mt7620, rt3883 and rt5350

Signed-off-by: Michael Lee <igvtee@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47616 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agowpa-supplicant: Get 802.11s ssid information from option mesh_id
blogic [Tue, 24 Nov 2015 18:28:44 +0000 (18:28 +0000)]
wpa-supplicant: Get 802.11s ssid information from option mesh_id

The scripts for authsae and iw use the option mesh_id to get set the
"meshid" during a mesh join. But the script for wpad-mesh ignores the
option mesh_id and instead uses the option ssid. Unify the mesh
configuration and let the wpa_supplicant script also use the mesh_id from
the configuration.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47615 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoauthsae: Use kbit/s as mcast_rate unit like wpad
blogic [Tue, 24 Nov 2015 18:28:35 +0000 (18:28 +0000)]
authsae: Use kbit/s as mcast_rate unit like wpad

The OpenWrt wireless configuration for mcast_rate is defined as Kbit/s when
using wpa_supplicant for IBSS/802.11s and iw for unencrypted IBSS/802.11s.
But when using authsae, the unit for the same option is redefined as
Mbit/s. Better use the same unit for this option independent of the backend
which is used.

Old values for mcast_rate (< 1000) are still interpreted Mbit/s to avoid
problems during upgrades from older versions.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47614 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoauthsae: Fix meshid in authsae config
blogic [Tue, 24 Nov 2015 18:28:19 +0000 (18:28 +0000)]
authsae: Fix meshid in authsae config

The variable $mesh_id was never defined in authsae_start_interface and thus
the option meshid in $authsae_conf_file was always set to "".

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47613 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoar71xx: Build initramfs by default for Mikrotik devices
blogic [Tue, 24 Nov 2015 18:28:05 +0000 (18:28 +0000)]
ar71xx: Build initramfs by default for Mikrotik devices

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47612 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agouboot-imx6: fix build with gcc-5
blogic [Tue, 24 Nov 2015 18:27:57 +0000 (18:27 +0000)]
uboot-imx6: fix build with gcc-5

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47611 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agobrcm2708: fix multi-device image generation
blogic [Tue, 24 Nov 2015 18:27:43 +0000 (18:27 +0000)]
brcm2708: fix multi-device image generation

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47610 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agobase-files: config_generate: honour port_mask property (#20963)
jow [Tue, 24 Nov 2015 13:39:53 +0000 (13:39 +0000)]
base-files: config_generate: honour port_mask property (#20963)

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47609 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoipq806x: another fix to the stmmac DMA configuration to fix remaining data corruption...
nbd [Sun, 22 Nov 2015 21:59:22 +0000 (21:59 +0000)]
ipq806x: another fix to the stmmac DMA configuration to fix remaining data corruption issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47603 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoubox: update ubox to version 2015-11-22
hauke [Sun, 22 Nov 2015 21:21:09 +0000 (21:21 +0000)]
ubox: update ubox to version 2015-11-22

This version fixes a potential uncontrolled format string problem. This
makes it possible to activate the format security check.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47600 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agomountd: update mountd to version 2015-11-22
hauke [Sun, 22 Nov 2015 21:20:45 +0000 (21:20 +0000)]
mountd: update mountd to version 2015-11-22

This version fixes a potential uncontrolled format string problem. This
makes it possible to activate the format security check.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47599 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agofstools: update fstools to version 2015-11-22
hauke [Sun, 22 Nov 2015 21:20:02 +0000 (21:20 +0000)]
fstools: update fstools to version 2015-11-22

This version fixes a potential uncontrolled format string problem. This
makes it possible to activate the format security check.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47598 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoRevert "mvebu: migrate led and network setup to board detection framework"
jow [Sun, 22 Nov 2015 20:52:10 +0000 (20:52 +0000)]
Revert "mvebu: migrate led and network setup to board detection framework"

Roll back the mvebu conversion to board detection code as we need to fix
some strcutural issues first.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47597 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoar71xx: fix network default config of the TEW-732BR
jow [Sun, 22 Nov 2015 20:00:13 +0000 (20:00 +0000)]
ar71xx: fix network default config of the TEW-732BR

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47595 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoipq806x: fix a nasty stmmac data corruption bug caused by faulty DMA initialization
nbd [Sun, 22 Nov 2015 19:07:00 +0000 (19:07 +0000)]
ipq806x: fix a nasty stmmac data corruption bug caused by faulty DMA initialization

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47594 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoipq806x: update stmmac to the version from linux 4.3
nbd [Sun, 22 Nov 2015 19:06:51 +0000 (19:06 +0000)]
ipq806x: update stmmac to the version from linux 4.3

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47593 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoath10k-firmware: add board-2.bin for qca99x0
nbd [Sun, 22 Nov 2015 19:06:42 +0000 (19:06 +0000)]
ath10k-firmware: add board-2.bin for qca99x0

Keep board.bin as fallback for devices without OTP that load caldata
from flash

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47592 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agobuild: add support for choosing a different url filename part than the output file
nbd [Sun, 22 Nov 2015 19:06:33 +0000 (19:06 +0000)]
build: add support for choosing a different url filename part than the output file

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47591 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agobase-files: use the correct path in case of modified preinit options
nbd [Sun, 22 Nov 2015 19:06:20 +0000 (19:06 +0000)]
base-files: use the correct path in case of modified preinit options

If the user sets any preinit options in .config, the wrong path may get
applied due to wrong default value in image-config.in and due to Makefile
writing also the unchanged options into 00_preinit.conf

Modify the default path in image-config.in to match the current default
path set by r47080. Also modify the fall-back default in Makefile.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47590 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agolinux: add support of Synopsys ARC770-based boards
nbd [Sun, 22 Nov 2015 19:06:07 +0000 (19:06 +0000)]
linux: add support of Synopsys ARC770-based boards

This patch introduces support of new boards with ARC cores.

 [1] Synopsys SDP board
     This is a new-generation development board from Synopsys that
     consists of base-board and CPU tile-board (which might have a real
     ASIC or FPGA with CPU image).
     It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C
     etc and is intended to be used for early development of ARC-based
     products.

 [2] nSIM
     This is a virtual board implemented in Synopsys proprietary
     software simulator (even though available for free for open source
     community). This board has only serial port as a peripheral and so
     it is meant to be used for runtime testing which is especially
     useful during bring-up of new tools and platforms.
     What's also important ARC cores are very configurable so there're
     many variations of options like cache sizes, their line lengths,
     additional hardware blocks like multipliers, dividers etc. And this
     board could be used to make sure built software still runs on
     different HW configurations.

Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47589 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agokernel: mtd: Backport GD25Q128B support to 3.18
nbd [Sun, 22 Nov 2015 19:05:53 +0000 (19:05 +0000)]
kernel: mtd: Backport GD25Q128B support to 3.18

Support is present in 3.19 and above as kernel commit:
fcc87a95195236b0935183361a72e4a98bf577d8

Changes to other existing patches are a result of "make target/linux/refresh".

Signed-off-by: Srdjan Rosic <srdjan.rosic@gmail.com>
Signed-off-by: Srdjan Rosic <rosic@google.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47588 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agousign: Revert r47582 "usign: activate format-security checks"
hauke [Sun, 22 Nov 2015 14:56:17 +0000 (14:56 +0000)]
usign: Revert r47582 "usign: activate format-security checks"

I accidentally deactivated it. This should be set to active it in any case
independently what was set in the user config.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47587 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agoiperf: activate format-security checks
hauke [Sun, 22 Nov 2015 14:18:40 +0000 (14:18 +0000)]
iperf: activate format-security checks

This patch was taken from debian.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47586 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agogettext-full: activate format-security checks
hauke [Sun, 22 Nov 2015 14:18:04 +0000 (14:18 +0000)]
gettext-full: activate format-security checks

This patch was taken from upstream libcroco

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47585 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agogettext-full: update to version 0.19.6
hauke [Sun, 22 Nov 2015 14:17:11 +0000 (14:17 +0000)]
gettext-full: update to version 0.19.6

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47584 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agopx5g-standalone: activate format-security checks
hauke [Sun, 22 Nov 2015 14:16:09 +0000 (14:16 +0000)]
px5g-standalone: activate format-security checks

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47583 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 years agousign: activate format-security checks
hauke [Sun, 22 Nov 2015 14:15:34 +0000 (14:15 +0000)]
usign: activate format-security checks

This still compiles with format-security checks activated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47582 3c298f89-4303-0410-b956-a3cf2f4a3e73