nbd [Mon, 2 Mar 2015 20:33:02 +0000 (20:33 +0000)]
kernel: revert a broken chunk in the mips module reloc patch fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44592
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 2 Mar 2015 04:42:17 +0000 (04:42 +0000)]
kernel: fix the mips module relocation patch for 3.19+
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44590
3c298f89-4303-0410-b956-
a3cf2f4a3e73
mb [Sun, 1 Mar 2015 20:44:33 +0000 (20:44 +0000)]
Fix download URL of the 4.x kernel.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44589
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Sun, 1 Mar 2015 16:24:15 +0000 (16:24 +0000)]
adm5120: switch kernel to 3.18
Tested by Jonas on WP54g, thank you!
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44588
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Sun, 1 Mar 2015 16:24:11 +0000 (16:24 +0000)]
adm5120: enable low_mem
Most devices have only 16 MiB of RAM, this will allow them to boot
without OOM.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44587
3c298f89-4303-0410-b956-
a3cf2f4a3e73
lars [Sun, 1 Mar 2015 15:56:43 +0000 (15:56 +0000)]
xburst: Remove n516, n526 and id800wt subtargets
The driver code for supporting these subtargets was already removed a while ago,
so
the current images wont actually boot.
It is also quite unlikely that there are any users of them at this point, so
remove them.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44586
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sun, 1 Mar 2015 12:25:02 +0000 (12:25 +0000)]
lldpd: fix passing multiple ifnames to the daemon
Instead of multiple -I arguments, lldpd expects a comma separated list.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44585
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sun, 1 Mar 2015 11:37:18 +0000 (11:37 +0000)]
brcm47xx, brcm63xx: disable CONFIG_MIPS_O32_FP64_SUPPORT
The flag is experimental and requires toolchain support, which we don't
provide. Also neither target has an FPU so it becomes meaningless
without the FPU emulator enabled.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44584
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sun, 1 Mar 2015 11:37:15 +0000 (11:37 +0000)]
kernel: move CONFIG_MIPS_O32_FP64_SUPPORT to generic configs
Most MIPS targets have it disabled, so move the symbol to the generic
configs to keep target configs small.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44583
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sun, 1 Mar 2015 11:37:06 +0000 (11:37 +0000)]
brcm63xx: prefer gpio-button-hotplug over button-hotplug
Saves us pulling in the input system, shaving off a few kb from image
sizes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44582
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Sun, 1 Mar 2015 00:01:33 +0000 (00:01 +0000)]
adm5120: use subtarget configs for all kernels
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44581
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Sat, 28 Feb 2015 23:39:14 +0000 (23:39 +0000)]
adm5120: add 3.18 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44580
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Sat, 28 Feb 2015 22:46:42 +0000 (22:46 +0000)]
ep93xx: add 3.18 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44579
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Sat, 28 Feb 2015 20:53:55 +0000 (20:53 +0000)]
mpc52xx: add 3.18 config
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44578
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sat, 28 Feb 2015 19:59:50 +0000 (19:59 +0000)]
brcm63xx: fix DTS LEDs and buttons
- A4001N/A4001N1: fix swapped green and red LEDs
- CVG834G: add missing LED
- RTA1320: reorder LEDs by GPIO#
- V2500V: add missing LEDs and buttons
- WAP-5813n: fix WPS button (GPIO 35)
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44577
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sat, 28 Feb 2015 19:59:46 +0000 (19:59 +0000)]
brcm63xx: fix ethernet breakage in 3.18
Linux commit
d75b1ade567ffab ("net: less interrupt masking in NAPI")
chose the samantics of the napi poll return value, which caused napi to
not resume interrups/polling anymore.
Fix the return value to restore expected behaviour.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44576
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sat, 28 Feb 2015 19:59:34 +0000 (19:59 +0000)]
brcm63xx: fix BCM63268 interrupt register locations for legacy probe
Legacy probe passed the IRQSTAT registers instead of the IRQMASK
registers causing all register accesses to be offset by 16 bytes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44575
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sat, 28 Feb 2015 19:59:26 +0000 (19:59 +0000)]
brcm63xx: fix gpio register usage
The driver expected data then dir, but both dts and legacy code passed
dir then data. Fix this by making the driver expect the registers in
ascending order, i.e. dir then data.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44574
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Sat, 28 Feb 2015 18:15:59 +0000 (18:15 +0000)]
mpc83xx: start work on 3.18 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44573
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Sat, 28 Feb 2015 14:56:53 +0000 (14:56 +0000)]
omap: complete 3.18 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44572
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Sat, 28 Feb 2015 13:54:51 +0000 (13:54 +0000)]
omap: start working on 3.18 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44571
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 23:48:48 +0000 (23:48 +0000)]
brcm63xx: backport and enable DT spi-gpio no CS support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44570
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 23:48:32 +0000 (23:48 +0000)]
brcm63xx: fix image generation and broken patch
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44569
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:40:17 +0000 (17:40 +0000)]
b53: fix mmap register read/writes > 32 bit
For bcm63xx integrated switches, broadcom changed the data endianess
to match the system endianess. But this only applies to within one word,
which causes 48/64 bit values to be still split into their "litte endian"
groups.
E.g. 48 bit values (with 5 being the most significant byte) aligned
0x00 ..01 or 0123
0x04 2345 45..
will become
0x00 ..10 resp. 3210
0x04 5432 54..
Likewise for 64 bit values.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44568
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:40:09 +0000 (17:40 +0000)]
brcm63xx: remove gpio base workaround
Now that all gpio users without named gpios use DT, we do not need
to fix the gpio controller bases anymore.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44567
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:40:04 +0000 (17:40 +0000)]
brcm63xx: move buttons and leds to dts files
Register buttons and leds through DT for all available dts,
and remove them from the board files.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: remove leds/buttons from board files
fix wrong led polarities for dsl-274xb-c2, cpva642, p870hw
comment out spi-gpio and associated leds]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44566
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:39:49 +0000 (17:39 +0000)]
brcm63xx: probe gpio controllers through DT
Add a generic mmio gpio controller based driver and probe it
through device tree.
Use aliases for base calculation until we converted all users to
device tree or named gpios.
Convert bcm63xx_enet's ephy-reset gpio to use a named gpio.
While at it, remove the duplicate reset gpio defintion for livebox.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44565
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:39:29 +0000 (17:39 +0000)]
brcm63xx: convert BTV2500V to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44564
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:39:21 +0000 (17:39 +0000)]
brcm63xx: convert RTA1320 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44563
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:39:13 +0000 (17:39 +0000)]
brcm63xx: convert RTA1025 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44562
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:39:07 +0000 (17:39 +0000)]
brcm63xx: use dtb for cvg834g
Add a dtsi for bcm3368, add a dts and profile for cvg834g, and convert
it to use ImageDTB. Since HCS requires more arguments, enhance the max
arguments of the call.
The image name is intentionally left blank to prevent non-initramfs
images to be built, as they currently contain no rootfs and consequently
won't work.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44561
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:38:51 +0000 (17:38 +0000)]
brcm63xx: image: move image argument to front in *DTB calls
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44560
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:38:46 +0000 (17:38 +0000)]
brcm63xx: add dts and profile for Livebox
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44559
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:38:28 +0000 (17:38 +0000)]
brcm63xx: allow lzma to use 32MB RAM
Most 16 MiB RAM devices don't even load elf kernels, so it's safe to
assume we have at least 32 MB RAM. This fixes tftp booting with the
default package set as this already produces an uncompressed
kernel > 8 MiB.
New limit is 8 MiB compressed / 24 MiB compressed.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44558
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:38:25 +0000 (17:38 +0000)]
package: mtd: move bcm963xx_tag definition into source code
Remove the need for the header file to be exported - we don't need most
of it anyway; all we care about are the offset of the rootfs length and
header crc fields.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44557
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:38:14 +0000 (17:38 +0000)]
brcm63xx: do not align squashfs rootfs start
We do not need to align the start of read only rootfs's to erase blocks.
This allows us to write the squashfs rootfs directly behind the kernel,
potentially freeing up one erase block.
We still need to align for jffs2, so add a flag for imagetag to
optionally align the rootfs start.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44556
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:38:09 +0000 (17:38 +0000)]
brcm63xx: drop call to prepare_generic_squashfs
We do not use the result, so no need to call it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44555
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 27 Feb 2015 17:38:05 +0000 (17:38 +0000)]
firmware-utils: imagetag: use cyg_crc32 instead of duplicating code
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44554
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 27 Feb 2015 07:35:26 +0000 (07:35 +0000)]
kernel: fix 3.18+ if_bridge.h header conflict with musl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44553
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 27 Feb 2015 07:34:47 +0000 (07:34 +0000)]
procd: update to the latest version, fixes musl compile error
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44552
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 27 Feb 2015 07:34:24 +0000 (07:34 +0000)]
build: move tmp/.prereq-build to staging_dir/host to gracefully handle staging_dir deletion
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44551
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 26 Feb 2015 21:23:55 +0000 (21:23 +0000)]
ubox: fix segmentation fault in insmod
Fix segfault in kmodloader insmod mode due to uninitialized module
directory list.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44549
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 26 Feb 2015 13:44:05 +0000 (13:44 +0000)]
uhttpd: relay stderr to syslog
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44548
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 26 Feb 2015 13:42:47 +0000 (13:42 +0000)]
procd: add support for relaying daemon stdio to syslog
Procd enabled init scripts can now specify:
procd_set_param stdout 1
procd_set_param stderr 1
... to relay their respective standard IO streams to the system log.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44547
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 26 Feb 2015 13:42:44 +0000 (13:42 +0000)]
libubox: implement ulog_close() and call it on ulog_open()
This is required to properly update syslog idents when switching between
log modes.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44546
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 26 Feb 2015 10:25:29 +0000 (10:25 +0000)]
fstools: switch to ulog api
Update to git head in order to switch the block, mount_root etc. logging to
the common ulog() api for putting early boot messages into dmesg.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44545
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 26 Feb 2015 10:25:24 +0000 (10:25 +0000)]
ubox: switch to ulog api
Update to git head in order to switch the kmodloader logging to the common
ulog() api for putting early boot messages into dmesg.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44544
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 26 Feb 2015 10:25:21 +0000 (10:25 +0000)]
procd: switch to ulog api
Update to git head in order to switch the procd logging to the common ulog()
api for putting early boot messages into dmesg.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44543
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 26 Feb 2015 10:25:18 +0000 (10:25 +0000)]
libubox: introduce generic logging api
Update to git head in order to introduce the new ulog() logging api which
supports early boot logging to dmesg.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44542
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Thu, 26 Feb 2015 07:42:12 +0000 (07:42 +0000)]
6rd: honor tunlink in host dependency
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44541
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Thu, 26 Feb 2015 07:14:41 +0000 (07:14 +0000)]
firewall: fix some more null-pointer accesses
thanks to Hans Dedecker
Signed-off-by: Steven Barth <steven@midlink.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44540
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 25 Feb 2015 18:54:13 +0000 (18:54 +0000)]
fstools: fix build with enabled ubifs extroot support
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44538
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 25 Feb 2015 13:03:16 +0000 (13:03 +0000)]
fstools: fix multiple extroot problems
- Support external overlays on non-MTD systems again
- Account for new directory structure of overlayfs partitions (additional upper/ component)
- Support executing block from either overlay or rom
- Support loading fstab from either overlay or rom
- Log extroot failures to dmesg
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44535
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 25 Feb 2015 12:01:19 +0000 (12:01 +0000)]
modules: make ahci-platform depend on TARGET_ipq806x
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44534
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 25 Feb 2015 11:48:27 +0000 (11:48 +0000)]
ubox: kmodloader: support loading kmods from multiple directories
This is required during early boot in the extroot setup phase to support
loading kmods from the overlay that depend on kmods on the rom partition.
The subsequent mount_root updates will use the LD_LIBRARY_PATH env
variable to pass kmod directories to kmodloader.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44533
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Tue, 24 Feb 2015 18:53:14 +0000 (18:53 +0000)]
generic/4.0: refresh patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44532
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Tue, 24 Feb 2015 18:35:17 +0000 (18:35 +0000)]
generic/4.0: drop patches applied upstream
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44531
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Tue, 24 Feb 2015 18:30:16 +0000 (18:30 +0000)]
generic/4.0: drop 3.18 specifix dwc2 backport
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44530
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Tue, 24 Feb 2015 18:27:49 +0000 (18:27 +0000)]
generic/4.0: the ubi patches has been fixed in the 3.19 patchset already
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44529
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 24 Feb 2015 12:01:08 +0000 (12:01 +0000)]
ar71xx: refresh patches
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44528
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 24 Feb 2015 12:01:00 +0000 (12:01 +0000)]
ar71xx: Add QCA953X version2 SoC support
http://patchwork.ozlabs.org/patch/435234/
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44527
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 24 Feb 2015 12:00:50 +0000 (12:00 +0000)]
ar71xx: TL-WA7210n v2 support
This patch adds support for TP-Link TL-WA7210n[0]
[0] http://www.tplink.com/en/products/details/?model=TL-WA7210N
Signed-off-by: Hendrik Frenzel <hfrenzel@scunc.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44526
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 24 Feb 2015 12:00:22 +0000 (12:00 +0000)]
ipq806x: add ahci to default packages
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44525
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 24 Feb 2015 12:00:16 +0000 (12:00 +0000)]
modules: add ahci-platform
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44524
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 24 Feb 2015 12:00:09 +0000 (12:00 +0000)]
ipq806x: add default package selection
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44523
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 24 Feb 2015 12:00:04 +0000 (12:00 +0000)]
ipq806x: initialize the network on AP148
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44522
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 24 Feb 2015 11:59:56 +0000 (11:59 +0000)]
kernel: add qca-nss-gmac as a new module
This driver is used on IPQ806x to instanciate & drive the ethernet
interfaces.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44521
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 24 Feb 2015 11:59:51 +0000 (11:59 +0000)]
ipq806x: enable GMAC support in DTS
This adds the GMAC entries in the ipq806x dtsi file as well as in the
ap148 specific dts file.
This also adds the MDIO change as well.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44520
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 24 Feb 2015 11:59:47 +0000 (11:59 +0000)]
ipq806x: enable ar8xxx switch family support
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44519
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 24 Feb 2015 11:59:41 +0000 (11:59 +0000)]
ipq806x: fix spi read issues observed with SMP enabled
This change is fixing the issues observed when booting from NOR flash
with SMP enabled.
Error logs below:
building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of
xref (0 dead, 0 orphan) found.
m25p80 spi32766.0: SPI transfer failed: -110
spi_master spi32766: failed to transfer one message from queue
jffs2: Write of 873 bytes at 0x019001e8 failed. returned 0, retlen 792
Patch is cherry-picked from here:
https://www.codeaurora.org/cgit/quic/qsdk/oss/kernel/linux-msm/commit/drivers/spi/spi-qup.c?h=coconut_20140924&id=
4faba89e3ffbb1c5f6232651375b9b3212b50f02
More details in the patch file.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44518
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 24 Feb 2015 11:59:35 +0000 (11:59 +0000)]
mpc85xx: add 3.19 support
It took very little to make the TL-WDR4900 work under 3.19:
- config is the same as for 3.18
- only patch 210 had to be refreshed, the other patches are
the same as for 3.18
- in /etc/config/wireless the path options need to be prefixed
with "platform/" ('platform/
ffe09000.pci/...')
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44517
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 24 Feb 2015 07:21:25 +0000 (07:21 +0000)]
samba36: update to 3.6.25, fixes remote code execution bug (CVE-2015-0240)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44515
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Tue, 24 Feb 2015 06:40:37 +0000 (06:40 +0000)]
generic: fix 050-backport_netfilter_rtcache.patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44514
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 24 Feb 2015 06:07:40 +0000 (06:07 +0000)]
x86: remove spurious delete of /etc/config/network
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44513
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 24 Feb 2015 06:06:12 +0000 (06:06 +0000)]
mtools: fix build errors on mac os x (#19064)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44512
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Mon, 23 Feb 2015 22:59:53 +0000 (22:59 +0000)]
generic: early (incomplete!) 4.0 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44511
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Mon, 23 Feb 2015 11:09:03 +0000 (11:09 +0000)]
leds: package the NXP PCA963x driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44510
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Mon, 23 Feb 2015 10:35:29 +0000 (10:35 +0000)]
mvebu: set default WRT1900AC switch config
This sets 'enable_vlan' and thus uses 802.1q
VLANs, but without tagging on either interface.
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44509
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Mon, 23 Feb 2015 10:33:19 +0000 (10:33 +0000)]
mvebu: set WRT1900AC WAN interface MAC address
Toggles the LA bit on the WAN interface.
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44508
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 22 Feb 2015 08:29:34 +0000 (08:29 +0000)]
ppp: Allow PPTP over a specified interface
In a dual-WAN setup, it's useful to specify an interface over which to
have PPTP.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44507
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 22 Feb 2015 08:29:26 +0000 (08:29 +0000)]
comgt: Use TCGETS and TCSETS ioctls for struct termios
When passing struct termios to ioctl TCGETS and TCSETS should be
used instead of TCGETA and TCSETA, which are meant for the older
struct termio. Should fix https://dev.openwrt.org/ticket/19012
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44506
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 22 Feb 2015 08:29:18 +0000 (08:29 +0000)]
ipq806x: delete config-3.14 file
ipq806x target has been upgraded to 3.14. There is no need to maintain
this file anymore.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44505
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 22 Feb 2015 08:29:14 +0000 (08:29 +0000)]
ipq806x: fix "reboot" command
The watchdog driver already registers a restart notifier, we just have
to enable it in the config and in the DT to fix the "reboot" command.
This is done by integratin the following patch-set:
https://lkml.org/lkml/2015/2/20/610
I'm copy-pasting the description below:
qcom-wdt is currently assuming the presence of a dedicated node in DT
to gets its configuration. However, on msm architecture, the watchdog is
usually part of the timer block. So this patch-set is changing the driver
and slightly enhancing the timer DT bindings to provide the relevant clocks
and interrupts.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44504
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 22 Feb 2015 08:29:07 +0000 (08:29 +0000)]
ipq806x: enable watchdog kernel option
Some bootloaders seem to trigger the watchdog during the boot process,
therefore the lack of watchdog driver trigger a reboot a few seconds
after boot. So we'll enable it here to avoid it.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44503
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 22 Feb 2015 08:29:01 +0000 (08:29 +0000)]
kernel: Fix USB gadget modules for v3.18
Updated patch that fixes whitespace and supports kernel v3.3 too.
Signed-off-by: Owen Kirby <osk@exegin.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44502
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 22 Feb 2015 08:28:48 +0000 (08:28 +0000)]
mpc85xx: add mpic timer clock frequency to avoid boot log warning
MPIC timers are enabled in the config, however a devicetree clock setting
is missing causing the following error:
/soc@
ffe00000/timer@41100: cannot get timer frequency.
/soc@
ffe00000/timer@42100: cannot get timer frequency.
This patch adds the missing clock and avoids the error.
It's a functional copy of this code
do_fixup_by_compat_u32(blob, "fsl,mpic",
"clock-frequency", get_bus_freq(0), 1);
in arch/powerpc/cpu/mpc85xx/fdt.c in the u-boot code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44501
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 22 Feb 2015 08:28:42 +0000 (08:28 +0000)]
ramips: rt288x: add missing symbol
Defaulting to disabled, based on the value of
the (old?) CONFIG_RALINK_USBPHY
Signed-off-by: Claudio Leite <leitec@staticky.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44500
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 22 Feb 2015 08:28:35 +0000 (08:28 +0000)]
ramips: nexx wt3020: fix status led
For Nexx WT3020 board_name is wt3020, not nexx-wt3020
root@OpenWrt:~# . /lib/ramips.sh; echo $(ramips_board_name)
wt3020
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44499
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nico [Sun, 22 Feb 2015 01:31:21 +0000 (01:31 +0000)]
packages: remove uneeded PKG_BUILD_DIR overrides
Signed-off-by: Nicolas Thill <nico@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44498
3c298f89-4303-0410-b956-
a3cf2f4a3e73
rmilecki [Fri, 20 Feb 2015 07:07:53 +0000 (07:07 +0000)]
bcm53xx: add one more NVRAM possible size (0x180000)
Size 0x160000 was added to support Buffalo WZR-600DHP2, however Netgear
devices (R6250, R8000) require 0x180000.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44497
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 19 Feb 2015 14:30:03 +0000 (14:30 +0000)]
mpc85xx: set v3.18 as default
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44496
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 19 Feb 2015 14:04:47 +0000 (14:04 +0000)]
ralink: bump to v3.18
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44495
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 19 Feb 2015 14:04:41 +0000 (14:04 +0000)]
ramips: fix the mt7628 dts file
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44494
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 19 Feb 2015 10:30:39 +0000 (10:30 +0000)]
tools/patchelf: fix portability issue breaking mac os x builds (#18998)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44493
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 19 Feb 2015 09:07:06 +0000 (09:07 +0000)]
at91: Add dts for Exegin Q5x boards.
Signed-off-by: Owen Kirby <osk@exegin.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44492
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 19 Feb 2015 09:06:56 +0000 (09:06 +0000)]
at91: USB gadget subsystem cleanup and driver fix.
Signed-off-by: Owen Kirby <osk@exegin.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44491
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 19 Feb 2015 09:06:49 +0000 (09:06 +0000)]
at91: Enable power and reset controller drivers.
Signed-off-by: Owen Kirby <osk@exegin.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44490
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 18 Feb 2015 13:35:46 +0000 (13:35 +0000)]
at91: bump to v3.18
Signed-off-by: Your Name <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44489
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 18 Feb 2015 13:28:28 +0000 (13:28 +0000)]
include: netfilter: fix packaging of LOG target for Linux >= 3.16 (#19031)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44488
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 18 Feb 2015 09:49:38 +0000 (09:49 +0000)]
au1000: fix 3.18 and set it as default
Thanks to Bruno Randolf for testing and Manuel Lauss for providing a fix.
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44487
3c298f89-4303-0410-b956-
a3cf2f4a3e73
projects / openwrt.git / log