florian [Tue, 13 Nov 2012 17:20:19 +0000 (17:20 +0000)]
[malta] switch to kernel 3.6.6
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34192
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Tue, 13 Nov 2012 17:20:14 +0000 (17:20 +0000)]
[malta] fix CBUS UART registration
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34191
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 13 Nov 2012 14:48:03 +0000 (14:48 +0000)]
ar71xx: add profile and build image for the TL-WA7510N board
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34190
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 13 Nov 2012 14:48:02 +0000 (14:48 +0000)]
firmware-utils/mktplinkfw: add support for TL-WA7510N
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34189
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 13 Nov 2012 14:48:01 +0000 (14:48 +0000)]
ar71xx: user space support for the TL-WA7510N
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34188
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 13 Nov 2012 14:48:00 +0000 (14:48 +0000)]
ar71xx: add support for TP-Link TL-WA7510N
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.
http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n
[juhosg:
- cleanup commit message
- move non kernel related stuff into separate changes
- rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
- merge WA7510N support into the mach-tl-wa901nd.c file
- add 3.6 support]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34187
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 13 Nov 2012 14:47:58 +0000 (14:47 +0000)]
ar71xx: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34186
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 13 Nov 2012 08:54:14 +0000 (08:54 +0000)]
[lantiq] fixes ar9 / dgn3500 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34180
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 12 Nov 2012 21:36:23 +0000 (21:36 +0000)]
[ramips] previous commit pushed 1 file too many ;)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34179
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 12 Nov 2012 21:35:01 +0000 (21:35 +0000)]
[ramips] move ethernet hw init to init/uninit functions
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34177
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Mon, 12 Nov 2012 21:34:00 +0000 (21:34 +0000)]
brcm47xx: remove double definition of kmod-tg3 added in r34150
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34176
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Mon, 12 Nov 2012 21:32:33 +0000 (21:32 +0000)]
brcm47xx: fix cfe config detection on WGT634U broken in r33920
Thanks Russell Senior for reporting this.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34175
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 12 Nov 2012 19:27:30 +0000 (19:27 +0000)]
cns3xxx: merge gpio patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34174
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Mon, 12 Nov 2012 19:27:29 +0000 (19:27 +0000)]
cns3xxx: fix build failure after r34168
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34173
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Mon, 12 Nov 2012 19:13:45 +0000 (19:13 +0000)]
ppp:
- fix multilink ppp with custom ifnames, patch by George Kashperko <george@znau.edu.ua>
- refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34171
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Mon, 12 Nov 2012 12:49:47 +0000 (12:49 +0000)]
[kernel] MIPS: add a build fix for arch/mips/boot/compressed/decompress.c
And get rid of the AR7 patch because at least the Alchemy SoC also needs it
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34170
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Mon, 12 Nov 2012 09:18:00 +0000 (09:18 +0000)]
[cns3xxx]: reorder, rename and refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34169
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Mon, 12 Nov 2012 08:22:14 +0000 (08:22 +0000)]
[cns3xxx]: split spi patch, follow mainline file naming
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34168
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Mon, 12 Nov 2012 08:21:38 +0000 (08:21 +0000)]
[cns3xxx]: split the i2c patch, merge the retry fixup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34167
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 12 Nov 2012 07:56:37 +0000 (07:56 +0000)]
[atheros] move redboot boardconfig patch into target folder
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34166
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Sun, 11 Nov 2012 21:04:30 +0000 (21:04 +0000)]
[ixp4xx:] add support for the Tonze AP-422/425
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34165
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Sun, 11 Nov 2012 21:03:52 +0000 (21:03 +0000)]
refresh patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34164
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Sun, 11 Nov 2012 20:57:04 +0000 (20:57 +0000)]
[cns3xxx]: generate single images for tftp flashing as well as sysupgrade images for boards with old u-boot
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34163
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Sun, 11 Nov 2012 20:03:58 +0000 (20:03 +0000)]
cns3xxx: convert dwc_otg patches to files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34162
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Sun, 11 Nov 2012 20:03:56 +0000 (20:03 +0000)]
cns3xxx: convert ethernet patches to files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34161
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sun, 11 Nov 2012 19:57:17 +0000 (19:57 +0000)]
bcm63xx: switch to 3.6.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34160
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sun, 11 Nov 2012 19:42:35 +0000 (19:42 +0000)]
kernel: modules: ext4 depends on crypto-hash on 3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34159
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Sun, 11 Nov 2012 19:29:27 +0000 (19:29 +0000)]
[ixp4xx]: move fixed mapping of internal devices into vmalloc region
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34158
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 11 Nov 2012 19:26:54 +0000 (19:26 +0000)]
[au1000] advertise squashfs feature
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34157
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 11 Nov 2012 19:26:50 +0000 (19:26 +0000)]
[au1000] add support for Linux 3.6
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34156
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 11 Nov 2012 19:26:44 +0000 (19:26 +0000)]
[au1000] split kernel config between generic, au1500 and au1550
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34155
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 11 Nov 2012 18:41:09 +0000 (18:41 +0000)]
[ar7] add support for Linux 3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34154
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 11 Nov 2012 18:40:48 +0000 (18:40 +0000)]
[ar7] move files directory to files-3.3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34153
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 11 Nov 2012 18:40:43 +0000 (18:40 +0000)]
[package] i2c-gpio-mux: fix build for 3.6+ kernels
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34152
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sun, 11 Nov 2012 17:30:33 +0000 (17:30 +0000)]
brcm47xx: remove ssb-gige package
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34150
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 11 Nov 2012 16:11:39 +0000 (16:11 +0000)]
[ar7] generate image for AC49x
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34149
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 11 Nov 2012 16:11:34 +0000 (16:11 +0000)]
[ar7] create AC49x subtarget
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34148
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 11 Nov 2012 16:11:29 +0000 (16:11 +0000)]
[ar7] create generic subtarget
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34147
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 11 Nov 2012 16:11:22 +0000 (16:11 +0000)]
[ar7] detect AC49x flash partitions
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34146
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 11 Nov 2012 16:11:14 +0000 (16:11 +0000)]
[ar7] support AC49x bootloader environment
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34145
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 11 Nov 2012 16:11:09 +0000 (16:11 +0000)]
[ar7] add AudioCodes AC49x platform support to kernel
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34144
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 11 Nov 2012 16:11:00 +0000 (16:11 +0000)]
[ar7] free memory below kernel offset
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that
memory region so it is usable for Linux.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34143
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 11 Nov 2012 16:10:50 +0000 (16:10 +0000)]
[toolchain] uClibc: backport a fix for dlsym(RTLD_NEXT, ...) use
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34142
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Sun, 11 Nov 2012 11:07:59 +0000 (11:07 +0000)]
[ixp4xx]: fix machtype handling above 4096
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34141
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sat, 10 Nov 2012 23:28:58 +0000 (23:28 +0000)]
x86/generic: don't disable usbfs (#12452)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34139
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sat, 10 Nov 2012 22:10:47 +0000 (22:10 +0000)]
bcm63xx: fix compilation with kmod-ohci enabled with 3.6
Fixes the following error:
drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34138
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sat, 10 Nov 2012 19:59:16 +0000 (19:59 +0000)]
bcm63xx: add two missing usb patches to 3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34137
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sat, 10 Nov 2012 19:59:07 +0000 (19:59 +0000)]
bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34136
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 10 Nov 2012 02:47:33 +0000 (02:47 +0000)]
mac80211: add more tx skb free fixes (hopefully final fix to #11894)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34133
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Fri, 9 Nov 2012 21:37:54 +0000 (21:37 +0000)]
cns3xxx: clean up pcie patches
Combine two pcie patches (2nd patch undid the 1st patch) together
and refresh the other affected patches
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34132
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 9 Nov 2012 19:26:58 +0000 (19:26 +0000)]
[lantiq] add more profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34131
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 9 Nov 2012 19:26:43 +0000 (19:26 +0000)]
[lantiq] a few more dts files (WIP)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34130
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 9 Nov 2012 19:26:30 +0000 (19:26 +0000)]
[lantiq] add mtd split and atm patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34129
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 9 Nov 2012 10:53:36 +0000 (10:53 +0000)]
x86: use $(strip) for the at_keyboard check
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34127
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 9 Nov 2012 10:19:51 +0000 (10:19 +0000)]
x86: only enable at_keyboard for the generic and kvm_guest subtargets to avoid hangs on alix2 and others (thx, russell)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34126
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 9 Nov 2012 09:07:29 +0000 (09:07 +0000)]
generic: sanitize deps_initramfs list
If any filename in the intramfs dependency
list contains a colon, that causes a kernel
build error like this:
/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns. Stop.
make[5]: *** [usr] Error 2
Fix it by removing such filenames from the
deps_initramfs list.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34125
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 8 Nov 2012 15:08:31 +0000 (15:08 +0000)]
build: remove remaining references to TOOLCHAIN_JOBS (thx, Sedat Dilek)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34122
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Thu, 8 Nov 2012 11:31:56 +0000 (11:31 +0000)]
cns3xxx: exit from laguna late_initcall if not running on laguna board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34120
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 8 Nov 2012 11:22:09 +0000 (11:22 +0000)]
scripts: fix remote-gdb script to cope with _eabi suffix in uClibc version
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34118
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 8 Nov 2012 10:48:08 +0000 (10:48 +0000)]
resolveip: fix endless getopt() loop when compiled for arm (#12290)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34116
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Thu, 8 Nov 2012 05:42:31 +0000 (05:42 +0000)]
cns3xxx: add PPS support for laguna
Many Laguna products have on-board GPS with Pulse-per-second (PPS)
support. This patch adds kernel support (statically) and adds
the platform data in laguna board support.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34115
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Thu, 8 Nov 2012 05:40:34 +0000 (05:40 +0000)]
[cns3xxx]: fixup symbol selection
SMP already selects HAVE_ARM_TWD and HAVE_ARM_SCU,
ARCH_CNS3XXX already selects MIGHT_HAVE_PCI
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34114
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Wed, 7 Nov 2012 23:12:06 +0000 (23:12 +0000)]
cns3xxx: fix coding style in board script
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34113
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 7 Nov 2012 20:26:31 +0000 (20:26 +0000)]
[ramips] adds fon20n profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34112
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 7 Nov 2012 20:26:21 +0000 (20:26 +0000)]
ramips: use kernel 3.6.6
## Booting image at
80800000 ...
Image Name: MIPS OpenWrt Linux-3.6.6
Created: 2012-11-06 14:19:54 UTC
System Control Status = 0x20440000
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size:
3560768 Bytes = 3.4 MB
Load Address:
80000000
Entry Point:
80000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address
80000000) ...
## Giving linux memsize in MB, 32
Starting kernel ...
[ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4
20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is:
0001964c (MIPS 24KEc)
[ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory:
02000000 @
00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=
0000c388
[ 0.000000] Readback ErrCtl register=
0000c388
[ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:48
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=
1277952)
[ 0.090000] pid_max: default: 32768 minimum: 301
[ 0.100000] Mount-cache hash table entries: 512
[ 0.110000] NET: Registered protocol family 16
[ 0.120000] MIPS: machine is Allnet ALL0239-3G
[ 0.140000] bio: create slab <bio-0> at 0
[ 0.150000] Switching to clocksource MIPS
[ 0.160000] NET: Registered protocol family 2
[ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.210000] TCP: reno registered
[ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.240000] NET: Registered protocol family 1
[ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 5.490000] msgmni has been set to 52
[ 5.500000] io scheduler noop registered
[ 5.510000] io scheduler deadline registered (default)
[ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[ 5.560000] physmap platform flash device:
00800000 at
bf000000
[ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[ 5.610000] Amd/Fujitsu Extended Query version 1.3.
[ 5.620000] number of CFI chips: 1
[ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[ 5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[ 5.650000] 0x000000000000-0x000000030000 : "u-boot"
[ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 5.680000] 0x000000040000-0x000000050000 : "factory"
[ 5.690000] 0x000000050000-0x000000130000 : "kernel"
[ 5.700000] 0x000000130000-0x000000800000 : "rootfs"
[ 5.710000] mtd: partition "rootfs" set to be root filesystem
[ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[ 5.740000] 0x000000050000-0x000000800000 : "firmware"
[ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[ 5.780000] TCP: cubic registered
[ 5.780000] NET: Registered protocol family 17
[ 5.790000] 8021q: 802.1Q VLAN Support v1.8
[ 5.820000] Freeing unused kernel memory: 2676k freed
[ 6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -
Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release:
compat-drivers-2012-09-04-2-gddac993
[ 10.170000] Backport based on wireless-testing.git master-2012-09-07
[ 10.180000] compat.git: wireless-testing.git
[ 10.210000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.230000] cfg80211: World regulatory domain updated:
[ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.250000] cfg80211: (
2402000 KHz -
2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.270000] cfg80211: (
2457000 KHz -
2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.280000] cfg80211: (
2474000 KHz -
2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.300000] cfg80211: (
5170000 KHz -
5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.310000] cfg80211: (
5735000 KHz -
5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.430000] NET: Registered protocol family 10
[ 10.760000] PPP generic driver version 2.4.2
[ 10.820000] l2tp_core: L2TP core driver, V2.0
[ 10.840000] l2tp_netlink: L2TP netlink interface
[ 10.870000] sit: IPv6 over IPv4 tunneling driver
[ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.060000] NET: Registered protocol family 24
[ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.510000] device eth0.1 entered promiscuous mode
[ 14.520000] device eth0 entered promiscuous mode
[ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 14.550000] br-lan: port 1(eth0.1) entered forwarding state
[ 14.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33
BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r34079)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/#
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34111
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 7 Nov 2012 20:26:04 +0000 (20:26 +0000)]
ramips: add HAVE_CLK to Kconfig on all ramips socs
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34110
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 7 Nov 2012 20:25:55 +0000 (20:25 +0000)]
ramips: add linux-3.6 configuration for ramips socs
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/rt288x/config-3.6
create mode 100644 target/linux/ramips/rt305x/config-3.6
create mode 100644 target/linux/ramips/rt3883/config-3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34109
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 7 Nov 2012 20:25:34 +0000 (20:25 +0000)]
ramips: port patches to linux-3.6
Signed-off-by: Daniel Golle <dgolle@allnet.de>
create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34108
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Wed, 7 Nov 2012 19:36:56 +0000 (19:36 +0000)]
[kernel] Load schedule modules
They were missing the AUTOLOAD directive.
Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34107
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 7 Nov 2012 16:15:22 +0000 (16:15 +0000)]
buildroot: isolate the .install stamp files for build variants (#12279)
This fixes missing embedded packages if multiple build variants are selected in
the build config, e.g. missing ppp if CONFIG_PACKAGE_ppp=y and
CONFIG_PACKAGE_ppp-multilink=m .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34106
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Wed, 7 Nov 2012 09:01:03 +0000 (09:01 +0000)]
bcm63xx: Enable endian check support for ath9k pci fixup.
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34105
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Wed, 7 Nov 2012 07:51:24 +0000 (07:51 +0000)]
[ixp4xx]: fixup typos in the compex patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34104
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Tue, 6 Nov 2012 15:21:46 +0000 (15:21 +0000)]
linux: export bcm963xx_tag.h to userspace
Export bcm963xx_tag.h so mtd can use it without using kernel includes.
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
from original location, refresh patches, use a more matching patch
number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34103
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Tue, 6 Nov 2012 11:16:43 +0000 (11:16 +0000)]
cns3xxx: refresh kernel config file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34102
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Tue, 6 Nov 2012 11:16:41 +0000 (11:16 +0000)]
cns3xxx: use files directory
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34101
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 6 Nov 2012 10:39:43 +0000 (10:39 +0000)]
[lantiq] add OWRTDTB marker patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34100
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 6 Nov 2012 07:43:08 +0000 (07:43 +0000)]
remove bogus file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34099
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 6 Nov 2012 07:41:44 +0000 (07:41 +0000)]
[lantiq] unbreak ltq-dsl-fw
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34098
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 6 Nov 2012 07:38:24 +0000 (07:38 +0000)]
[lantiq] add support for arv7525
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34097
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 6 Nov 2012 07:38:18 +0000 (07:38 +0000)]
[lantiq] prepare dsl driver for 3.6 and split fw into a seperate package
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34096
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Tue, 6 Nov 2012 05:45:12 +0000 (05:45 +0000)]
[cns3xxx]: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34095
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Tue, 6 Nov 2012 05:39:08 +0000 (05:39 +0000)]
[cns3xxx]: add default packages
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34094
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Tue, 6 Nov 2012 00:48:21 +0000 (00:48 +0000)]
linux: generic: fix split_squashfs for 3.6
_read expects the retlen to be initialized to zero, which the mtd_read
helper does. So fix it by using mtd_read instead of calling _read directly.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34093
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Mon, 5 Nov 2012 22:50:29 +0000 (22:50 +0000)]
bcm63xx: fix SPW303V images
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34091
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Mon, 5 Nov 2012 19:28:24 +0000 (19:28 +0000)]
netifd: don't send a default client identifier in DHCP requests if no clientid uci option is given (#12426)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34089
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Nov 2012 13:23:28 +0000 (13:23 +0000)]
ar71xx: nuke ath79_set_usb_power_gpio helper
It is no longer used.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34088
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Nov 2012 13:23:27 +0000 (13:23 +0000)]
ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34087
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Nov 2012 13:22:09 +0000 (13:22 +0000)]
kernel: update linux 3.6 to 3.6.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34086
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Mon, 5 Nov 2012 11:38:23 +0000 (11:38 +0000)]
[ixp4xx]: use the mainline machname for the compex boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34083
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Nov 2012 11:04:45 +0000 (11:04 +0000)]
ramips: enable USB power on the DIR-645
Closes #12422.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34082
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Nov 2012 11:04:43 +0000 (11:04 +0000)]
linux/3.3: backport an upstream GPIO patch
The backported patch introduces new flags to
automatically export GPIOs when using the
convenience unctions gpio_request_one() or
gpio_request_array().
This will be used by ar71xx/ramips platforms.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34081
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Nov 2012 07:10:35 +0000 (07:10 +0000)]
Add ledtrig-oneshot module for 3.6 kernels
This patch adds a package for the ledtrig-oneshot module, available in
3.6 and later.
[juhosg: change dependency from LINUX_3_6 to !LINUX_3_3]
Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34079
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Nov 2012 06:58:53 +0000 (06:58 +0000)]
ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34078
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 4 Nov 2012 22:08:54 +0000 (22:08 +0000)]
ar71xx: don't use the unknown LED on the ZCN-1523-5 board
According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.
If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34076
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 4 Nov 2012 21:12:20 +0000 (21:12 +0000)]
ar71xx: include mtd layout in the command line for ZCN-1523H-* boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34074
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 4 Nov 2012 20:15:18 +0000 (20:15 +0000)]
ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34072
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 4 Nov 2012 17:01:30 +0000 (17:01 +0000)]
mtd: avoid adding the kernel dir to includes, use the toolchain headers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34071
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 4 Nov 2012 17:01:27 +0000 (17:01 +0000)]
ppp: add more pppol2tpv3 related structs from the kernel headers to fix compile issues with linux 3.6
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34070
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 4 Nov 2012 17:01:23 +0000 (17:01 +0000)]
iptables: remove support for libipq, it has been obsolete for years and is unsupported in newer kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34069
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 4 Nov 2012 17:01:15 +0000 (17:01 +0000)]
linux-3.6: fix portability of some includes files in tools/ used on the host
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34068
3c298f89-4303-0410-b956-
a3cf2f4a3e73
projects / openwrt.git / log