luka [Fri, 13 Sep 2013 21:50:35 +0000 (21:50 +0000)]
imx6: add network defaults for GW5400-A
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37979
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Fri, 13 Sep 2013 20:39:23 +0000 (20:39 +0000)]
kernel: add missing config option
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37978
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Fri, 13 Sep 2013 19:24:08 +0000 (19:24 +0000)]
brcm47xx: board detection, GPIO for Linksys E1000 V2.1
This patch adds board detection for the Linksys E1000 V2.1 router, as well
as GPIO support for same.
This fixes bug #14135. Currently, wired networking isn't working on the
router, and I haven't tried the wireless, but with this patch, OpenWRT
successfully boots, and all the LEDs and buttons work properly.
Signed-off-by: Zachary Catlin <zcatlin@indiana.edu>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37977
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 13 Sep 2013 17:29:16 +0000 (17:29 +0000)]
ar71xx: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37976
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 13 Sep 2013 17:29:14 +0000 (17:29 +0000)]
generic/3.10: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37975
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 13 Sep 2013 17:24:25 +0000 (17:24 +0000)]
generic/3.10: rename mtd patches
- change patch numbers to group the related stuff together,
- add mtd prefix where it is missing,
- use hyphens in the patch names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37974
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 13 Sep 2013 16:39:36 +0000 (16:39 +0000)]
cns21xx: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37973
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 13 Sep 2013 16:39:34 +0000 (16:39 +0000)]
cns21xx: switch to 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37972
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 13 Sep 2013 16:39:33 +0000 (16:39 +0000)]
cns21xx: add support for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37971
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Fri, 13 Sep 2013 16:00:52 +0000 (16:00 +0000)]
brcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device
Most of the Linksys devices without an own GPIO configuration where
detected as WRT54G. On one board this made OpenWrt to boot into
failsafe every time, because one GPIO configurated as button was not a
button.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37970
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Fri, 13 Sep 2013 15:56:35 +0000 (15:56 +0000)]
brcm47xx: detect WRT310NV1
Thanks Devastator for testing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37969
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 13 Sep 2013 15:38:42 +0000 (15:38 +0000)]
cns21xx: make cns21xx-ehci a separate driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37968
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 13 Sep 2013 15:38:41 +0000 (15:38 +0000)]
cns21xx: disable legacy PTY devices
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37967
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 13 Sep 2013 15:38:40 +0000 (15:38 +0000)]
cns21xx: fix broken case statement in led defaults file
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37966
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 13 Sep 2013 15:38:39 +0000 (15:38 +0000)]
cns21xx: enable XZ_DEC_ARM and XZ_DEC_BCJ kernel options
Squashfs is unable to decompress some blocks without that:
[ 0.970000] SQUASHFS error: xz_dec_run error, data probably corrupt
[ 0.980000] SQUASHFS error: squashfs_read_data failed to read block 0x29a72
[ 0.990000] SQUASHFS error: Unable to read fragment cache entry [29a72]
[ 1.000000] SQUASHFS error: Unable to read page, block 29a72, size 14c50
[ 1.010000] SQUASHFS error: Unable to read fragment cache entry [29a72]
[ 1.020000] SQUASHFS error: Unable to read page, block 29a72, size 14c50
[ 1.260000] SQUASHFS error: xz_dec_run error, data probably corrupt
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37965
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 13 Sep 2013 15:28:50 +0000 (15:28 +0000)]
ar71xx: add support for TL-MR3040 v2
This patch adds support for building firmware images for the
TP-Link TL-MR3040 v2. Tested and working on v2.1 hardware.
Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37964
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 13 Sep 2013 15:01:40 +0000 (15:01 +0000)]
ar71xx: add wireless bgn led support for dir-825-c1
I checked the GPL code drop from D-Link and tried to get the wireless
and LAN switch LEDs to light up. I found some references in
AthSDK/www/DIR-825_C1/bsp.h as well as
AthSDK/www/DIR-825_C1/rootfs/etc/sysconfig/S2gpio.sh, but in the end I
only got the led for 2.4GHz to work. Anyway, here's the patch.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37963
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 13 Sep 2013 13:24:45 +0000 (13:24 +0000)]
uhttpd: udpat to git head
- fixes buffer corruption with JSON-RPC list calls
- change JSON-RPC protocol to include the session ID into the call
attributes instead of passing it via the URL
- forcibly pass effective session ID as "ubus_rpc_session" attribute
to called procedures
- change ubus acl checking to conform with new ubus session namespace
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37962
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 13 Sep 2013 13:24:32 +0000 (13:24 +0000)]
rpcd: update to git head
- recalculate session ACLs on reload
- support negative access group expressions in /etc/config/rpcd
- prevent destryoing the default session
- use "ubus_rpc_session" attribute as session identifier to enforce JSON-RPC proxy security
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37961
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Thu, 12 Sep 2013 23:38:54 +0000 (23:38 +0000)]
kernel: gsc depends on kmod-i2c-core
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37960
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 12 Sep 2013 22:07:12 +0000 (22:07 +0000)]
brcm47xx: remove support for kernel 3.8
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37959
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 12 Sep 2013 22:04:55 +0000 (22:04 +0000)]
brcm47xx: add default config for new kernel config option
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37958
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 12 Sep 2013 22:03:45 +0000 (22:03 +0000)]
kernel: update bcma and ssb to wireless-testing master-2013-09-09
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37957
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Thu, 12 Sep 2013 14:38:48 +0000 (14:38 +0000)]
kernel: add support for ESMT F25L32PA with upstream submission
Signed-off-by: Flavio Silveira <fggs@terra.com.br>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37956
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Thu, 12 Sep 2013 12:57:42 +0000 (12:57 +0000)]
odhcp6c: Timing workaround for buggy servers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37951
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Wed, 11 Sep 2013 22:08:46 +0000 (22:08 +0000)]
kernel: fix imx sata module
The imx sata module has only been backported to imx6 target. This change will
fix buildbot errors due to missing patches in other targets. Keep this until
all targets use kernel version with imx sata support in them.
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37950
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 11 Sep 2013 14:30:15 +0000 (14:30 +0000)]
kernel: align the skb padding to power of two
The skb is usually started by a padding which allows the protocols in the
network stack to add their headers in front of the payload. The skb can be
reallocated in case the preallocated padding is not large enough. This can for
example happen in the function __skb_cow which will check the requested extra
headroom and allocate more buffer when the requested headroom is bigger than
the available one. The extra buffer is aligned again to the multiple of the
NET_SKB_PAD of the target architecture.
The macro used to create the multiple of the NET_SKB_PAD is written in a way
which allows only values power two as alignment parameter. The currently used
value of 48 bytes can not be written as n ** 2 but as 2 ** 4 + 2 ** 5. The
extra buffer is therefore not always the multiple of 48 but can be 16, 64, 80,
128, 144 and so on. The generated values are also not monotonic (48 requested
bytes are mapped to 80 allocated bytes and 49 requested bytes are mapped to 64
allocated bytes).
These unexpected small values result in more reallocations of the buffer. This
was noticed prominently during tests between two QCA9558 720 MHz devices which
were connected via ethernet to PCs and had a HT40 802.11n 3x3 link between each
other. The throughput PC-to-PC during iperf TCP runs increased reliable from
186 Mibit/s to 214 Mibit/s in one direction and from 195 Mibit/s to 220 Mibit/s
in the other direction. This is a performance increase of ~14% just by reducing
the amount of reallocations.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37948
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 11 Sep 2013 14:29:44 +0000 (14:29 +0000)]
toolchain/gcc: upgrade linaro gcc 4.6 to 4.6-2013.05
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37947
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 11 Sep 2013 14:28:21 +0000 (14:28 +0000)]
toolchain/gcc: fix up breakage introduced in r37945
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37946
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Wed, 11 Sep 2013 13:19:43 +0000 (13:19 +0000)]
[toolchain/gcc]: upgrade Linaro gcc 4.8 to 4.8-2013.08
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37945
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Wed, 11 Sep 2013 13:18:23 +0000 (13:18 +0000)]
[toolchain/binutils]: add support for Linaro binutils 2.23.2-2013.06
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37944
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Wed, 11 Sep 2013 13:16:13 +0000 (13:16 +0000)]
[toolchain/gdb]: upgrade to 7.6-2013.05
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37943
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 11 Sep 2013 12:45:24 +0000 (12:45 +0000)]
kernel: fix broken depends syntax introduced in r37933
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37942
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 11 Sep 2013 12:13:33 +0000 (12:13 +0000)]
rpcd: update to git head
- introduces persistent null session to allow access to procedures without login
- implements session.login procedure to support user logins via json-rpc
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37941
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 11 Sep 2013 12:08:44 +0000 (12:08 +0000)]
kernel: Fix FIQ code on VIVT CPUs (#14145)
Backport an upstream patch to fix FIQ code on VIVT CPUs
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37940
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 11 Sep 2013 12:08:37 +0000 (12:08 +0000)]
toolchain: refresh uClibc patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37939
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 11 Sep 2013 12:08:27 +0000 (12:08 +0000)]
toolchain: define MUSL dynamic linker for SPARC
SPARC builds are currently broken because we do not define the MUSL
dynamic linker name, fix that.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37938
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Tue, 10 Sep 2013 22:26:37 +0000 (22:26 +0000)]
kernel: add imx sata module
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37937
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Tue, 10 Sep 2013 22:26:36 +0000 (22:26 +0000)]
imx6: backport ahci support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37936
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Tue, 10 Sep 2013 22:26:34 +0000 (22:26 +0000)]
imx6: add i2c retry on NAK
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37935
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Tue, 10 Sep 2013 22:26:33 +0000 (22:26 +0000)]
imx6: add gpio sysfs support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37934
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Tue, 10 Sep 2013 22:26:30 +0000 (22:26 +0000)]
kernel: allow hwmon GSC driver for all targets
- enable using hwmon GSC driver on all targets
- add a kmod package for it
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37933
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 10 Sep 2013 14:40:06 +0000 (14:40 +0000)]
build: enable MIPS16 again, but make it depend on !gcc-4.6
gcc 4.6 miscompiles hostapd with mips16, on gcc 4.8 it works
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37932
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 10 Sep 2013 13:47:44 +0000 (13:47 +0000)]
kernel: fix arch-dependent bug in hso module
Currently, the module causes an oops at least on rt5350. These patches
have been accepted upstream at:
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37931
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 10 Sep 2013 12:33:21 +0000 (12:33 +0000)]
Revert "build: enable MIPS16 by default if available"
This reverts commit r37926.
It seems to trigger some weird issues in hostapd that should be
investigated first
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37928
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 10 Sep 2013 12:09:13 +0000 (12:09 +0000)]
openssl: add parallel build support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37927
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 10 Sep 2013 12:09:07 +0000 (12:09 +0000)]
build: enable MIPS16 by default if available
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37926
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 10 Sep 2013 11:32:07 +0000 (11:32 +0000)]
procd: update to latest version, adds udevtrigger improvements by juhosg
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37925
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 10 Sep 2013 10:30:41 +0000 (10:30 +0000)]
toolchain/gcc: remove 4.6.3, it is unused and unmaintained
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37924
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 9 Sep 2013 17:31:53 +0000 (17:31 +0000)]
rt2x00: merge an rt2800 initialization order fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37922
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Mon, 9 Sep 2013 14:35:15 +0000 (14:35 +0000)]
rpcd: update to git head
- adds support for service triggering on config commit
- adds uci transaction support
- adds daemon reload support without loosing session data
- exports headers for use by external plugins
- drops LuCI2 in favor to an out of tree plugin
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37921
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 8 Sep 2013 09:38:38 +0000 (09:38 +0000)]
ath9k: clean up some patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37919
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 8 Sep 2013 09:38:32 +0000 (09:38 +0000)]
mac80211: merge a big batch of upstream changes/improvements
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37918
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 7 Sep 2013 18:33:07 +0000 (18:33 +0000)]
tools/cmake: disable qt related checks to fix build issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37917
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sat, 7 Sep 2013 15:46:27 +0000 (15:46 +0000)]
brcm47xx: add me as maintainer
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37916
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 7 Sep 2013 11:40:45 +0000 (11:40 +0000)]
ar71xx: use the lzma loader for the WRT160NL
Partition layout before:
0x000000040000-0x0000001a0000 : "kernel"
0x0000001a0000-0x0000007e0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=0x350000, len=0x490000
0x000000350000-0x0000007e0000 : "rootfs_data"
after:
0x000000040000-0x000000140000 : "kernel"
0x000000140000-0x0000007e0000 : "rootfs"
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=0x2f0000, len=0x4f0000
0x0000002f0000-0x0000007e0000 : "rootfs_data"
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37915
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 7 Sep 2013 11:34:08 +0000 (11:34 +0000)]
ppc40x: remove 3.8 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37914
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 7 Sep 2013 11:34:06 +0000 (11:34 +0000)]
ppc40x: switch to 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37913
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 7 Sep 2013 11:34:03 +0000 (11:34 +0000)]
ppc40x: add support for 3.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37912
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 6 Sep 2013 19:01:17 +0000 (19:01 +0000)]
brcm63xx: drop linux 3.9 support
It is EOL since quite a while, so no need to keep it around.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37911
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Fri, 6 Sep 2013 19:01:13 +0000 (19:01 +0000)]
brcm63xx: switch to linux 3.10
3.10 is stable enough, and 3.9 is EOL since a while.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37910
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Thu, 5 Sep 2013 21:13:51 +0000 (21:13 +0000)]
odhcp6c: more compatibility fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37907
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Thu, 5 Sep 2013 20:30:34 +0000 (20:30 +0000)]
kernel: b53: support phy ids for BCM5365
BCM5365 (and probably other older variants) use a different phy id, so
the phy driver never attached for them.
Fix this by adding the appropriate phy id to the fixup and the phy
driver.
Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37906
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 5 Sep 2013 20:17:28 +0000 (20:17 +0000)]
mac80211: kmod-rtl_pci: fix dependencies
This fixes the following error:
rtl_pci: Unknown symbol rtl_lps_leave (err 0)
rtl_pci: Unknown symbol rtl_lps_enter (err 0)
rtl8192ce: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192ce: Unknown symbol rtl_pci_probe (err 0)
rtl8192de: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192de: Unknown symbol rtl_pci_probe (err 0)
rtl8192se: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192se: Unknown symbol rtl_pci_probe (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37905
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 5 Sep 2013 19:57:44 +0000 (19:57 +0000)]
kernel: kmod-libphy, kmod-tg3: fix load order
This fixes the following error:
tg3: Unknown symbol mdiobus_alloc_size (err 0)
tg3: Unknown symbol phy_ethtool_sset (err 0)
tg3: Unknown symbol phy_mii_ioctl (err 0)
tg3: Unknown symbol phy_connect (err 0)
tg3: Unknown symbol mdiobus_register (err 0)
tg3: Unknown symbol mdiobus_free (err 0)
tg3: Unknown symbol phy_start (err 0)
tg3: Unknown symbol phy_start_aneg (err 0)
tg3: Unknown symbol mdiobus_unregister (err 0)
tg3: Unknown symbol phy_ethtool_gset (err 0)
tg3: Unknown symbol phy_stop (err 0)
tg3: Unknown symbol phy_disconnect (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37904
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 5 Sep 2013 19:56:04 +0000 (19:56 +0000)]
kernel: kmod-ssb, kmod-b44: fix load order
This fixes the following error:
b44: Unknown symbol ssb_device_is_enabled (err 0)
b44: Unknown symbol ssb_pcicore_dev_irqvecs_enable (err 0)
b44: Unknown symbol ssb_bus_may_powerdown (err 0)
b44: Unknown symbol ssb_pcihost_register (err 0)
b44: Unknown symbol ssb_device_disable (err 0)
b44: Unknown symbol ssb_device_enable (err 0)
b44: Unknown symbol ssb_driver_unregister (err 0)
b44: Unknown symbol __ssb_driver_register (err 0)
b44: Unknown symbol ssb_bus_powerup (err 0)
b44: Unknown symbol ssb_clockspeed (err 0)
b44: Unknown symbol ssb_dma_translation (err 0)
Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37903
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 5 Sep 2013 19:53:21 +0000 (19:53 +0000)]
kernel: kmod-firewire: fix dependencies
This fixes the following error:
firewire_core: Unknown symbol crc_itu_t (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37902
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 5 Sep 2013 19:43:38 +0000 (19:43 +0000)]
mac80211: do not download carl9170 firmware separately, but use the one from linux-firemware
linux-firemware contains the same version we loaded without this patch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37901
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 5 Sep 2013 19:41:00 +0000 (19:41 +0000)]
kernel: kmod-fs-xfs: fix dependencies
This fixes the following error:
xfs: Unknown symbol exportfs_decode_fh (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37900
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 5 Sep 2013 19:39:55 +0000 (19:39 +0000)]
kernel: kmod-usb-serial-keyspan: fix dependencies
This fixes the following error:
keyspan: Unknown symbol ezusb_fx1_ihex_firmware_download (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37899
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 5 Sep 2013 19:35:14 +0000 (19:35 +0000)]
ath10k: enable Atheros 802.11ac driver
This enables usage of the ath10k driver on OpenWrt. Only 2.0 PCI hardware
is supported. The ath10k firmware is currently only available
through github so use that as its source for now.
This goes build tested, not run time tested.
[Hauke: I did some minor changes]
Cc: ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: Mathieu Olivari <mathieu@qca.qualcomm.com>
Cc: Jerome Proffit <jproffit@qca.qualcomm.com>
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37898
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Thu, 5 Sep 2013 10:08:59 +0000 (10:08 +0000)]
Add missing symbol
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37897
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Wed, 4 Sep 2013 16:15:10 +0000 (16:15 +0000)]
kernel: b53: allow access the MIB counters on BCM5365
b53_no_ops has no elements and b53_port_ops has one element, this makes
the code access some random memory when trying to access the mib
counter functions.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37895
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Tue, 3 Sep 2013 23:22:16 +0000 (23:22 +0000)]
[package] kobs-ng: add new package
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37894
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 3 Sep 2013 15:46:39 +0000 (15:46 +0000)]
usbreset: rewrite to not rely on /proc/bus/usb anymore
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37893
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 3 Sep 2013 07:22:27 +0000 (07:22 +0000)]
ar71xx: fix NetGear initramfs image names
The '-initramfs' string is duplicated in the image names,
fix it.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37892
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Tue, 3 Sep 2013 06:29:46 +0000 (06:29 +0000)]
Fix IPv6 NAT breaking older kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37891
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 19:12:54 +0000 (19:12 +0000)]
kernel: update 3.10 to 3.10.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37890
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 19:05:58 +0000 (19:05 +0000)]
ar71xx: image: reorder Image/Build/* macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37889
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 19:05:57 +0000 (19:05 +0000)]
ar71xx: image: simplify more oneliner macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37888
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 19:05:56 +0000 (19:05 +0000)]
ar71xx: image: simplify oneliner loader macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37887
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 19:05:55 +0000 (19:05 +0000)]
ar71xx: image: simplify oneliner initramfs macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37886
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 19:05:54 +0000 (19:05 +0000)]
ar71xx: image: simplify oneliner buildkernel macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37885
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Mon, 2 Sep 2013 18:25:10 +0000 (18:25 +0000)]
scripts/feeds: ensure that --ff is enabled
Users may have merge.ff set to false, which will force merge commits to
be generated. The intent here is to have a fast-forward merge when
possible, so let's make sure fast-forwards are enabled.
Signed-off-by: John Szakmeister <john@szakmeister.net>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37884
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Mon, 2 Sep 2013 18:25:06 +0000 (18:25 +0000)]
build scripts: fix 'make defconfig' damage
Looking at the target 'defconfig' in include/toplevel, it doesn't
directly reference $(HOME)/.openwrt/defconfig nor does it reference any
prerequisites using it as a target.
Therefore, building "defconfig" as a target uses the defaults in the
tree, but not the defaults that a user might have explicitly specified.
This patch fixes this regression from r36361.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
[florian: apply with the proper patch level, wrap at 80 columns]
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37883
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Mon, 2 Sep 2013 18:25:01 +0000 (18:25 +0000)]
mcs814x: dlan-usb-extender: fix usbdev trigger
Every device I connect to the USB port is detected as 2-1, not 1-1.
So adjust the default setting accordingly.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37882
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 18:03:39 +0000 (18:03 +0000)]
ar71xx: optimize kernel generation
When the squashfs and jffs2 images are generated
in the same turn, the compressed kernel images
are generated twice with the same parameters.
Move compressed kernel generation into a separate
phase to avoid that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37881
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 16:33:13 +0000 (16:33 +0000)]
generic: remove linux version checks from myloader.c
The myloader partition parser code uses ifdef wrappers
to make the code usable on kernels below version 3.2.
All targets are using kernel 3.3 at least so the wraper
is not needed. Remove that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37880
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 16:10:44 +0000 (16:10 +0000)]
ar71xx: image: dynamically generate Image/Build/Template/* macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37879
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 16:09:12 +0000 (16:09 +0000)]
ar71xx: configure OBS4 line on TL-WR841N-v8/MR3420v2
It also fixes USB Power on MR3420v2.
This time we took the information from the source of GPL:
http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg18970.html
Confirmed and tested:
https://dev.openwrt.org/ticket/13201#comment:41
Thanks to oguretsagressive for testing.
Signed-off-by: Dmytro <dioptimizer@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37878
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Mon, 2 Sep 2013 15:36:51 +0000 (15:36 +0000)]
Add rpcd - an extensible backend server for ubus-over-json-rpc operations, session and acl management.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37877
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 09:24:59 +0000 (09:24 +0000)]
ar71xx: remove fs_* variables from image/Makefile
Those are not needed since we are generating the
initramfs images along with the others.
Remove the variables and use the template names
directly.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37876
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 08:45:32 +0000 (08:45 +0000)]
package/rotary-gpio-custom: fix checkpatch errors module source
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37875
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 08:45:31 +0000 (08:45 +0000)]
package/w1-gpio-custom: fix checkpatch errors in module source
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37874
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 08:45:30 +0000 (08:45 +0000)]
package/i2c-gpio-custom: fix checkpatch errors in module source
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37873
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 08:45:29 +0000 (08:45 +0000)]
package/kernel: add spi-gpio-custom module
The package makes it possible to create custom SPI
buses via GPIO lines.
This module is based on i2c-gpio-custom and allows to
configure an SPI bus via GPIO lines and expose it to
userspace without rebuilding the kernel. This is maily
intended to connect microcontrollers and other simple
SPI devices without making an ad-hoc kernel driver.
Signed-off-by: Marco Burato <zmaster.adsl@gmail.com>
[juhosg:
- change subject,
- extend and reformat commit message,
- cleanup checkpatch errors/warnings in module source]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37872
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 07:42:03 +0000 (07:42 +0000)]
ar71xx: fix initramfs image generation for Cameo933x profiles
Initramfs images are not generated for profiles which
are using the squashfs-only template. Add the missing
'Image/Build/Template/squashfs-only/initramfs' to fix
that.
Also, 'Image/Build/Cameo933x/initramfs' uses wrong
parameters for 'MkuImageLzma/initramfs' due to a
misplaced commma. Remove that to fix the generated
initramfs images.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37871
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 07:36:46 +0000 (07:36 +0000)]
x86/alix2: remove kernel config for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37870
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 07:36:45 +0000 (07:36 +0000)]
x86/alix2: switch to 3.10.9
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.
Russell says in the original patch:
"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built. The patches
required no changes."
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37869
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 2 Sep 2013 07:36:44 +0000 (07:36 +0000)]
x86/alix2: add kernel config for 3.10
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.
Russell says in the original patch:
"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built. The patches
required no changes."
The current patch contains additional configuration tweaks.
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37868
3c298f89-4303-0410-b956-
a3cf2f4a3e73
projects / openwrt.git / log