kaloz [Mon, 25 Mar 2013 14:18:32 +0000 (14:18 +0000)]
[gemini]: upgrade to 3.9-rc4, disable unsupported boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36128
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Mon, 25 Mar 2013 13:53:48 +0000 (13:53 +0000)]
[generic/3.9]: refresh patches against -rc4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36127
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Mon, 25 Mar 2013 13:53:17 +0000 (13:53 +0000)]
[generic/3.9]: add missing symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36126
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Mon, 25 Mar 2013 11:22:12 +0000 (11:22 +0000)]
iptables: don't use --enable-ipv6 if IPv6 is disabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36125
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Mon, 25 Mar 2013 11:12:57 +0000 (11:12 +0000)]
feeds.conf.default: switch LuCI feed to nbd.name git mirror
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36124
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Mon, 25 Mar 2013 10:58:48 +0000 (10:58 +0000)]
odhcp6c: minor bug fixes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36123
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 25 Mar 2013 06:40:03 +0000 (06:40 +0000)]
ar71xx: fix ethernet LEDs on the TL-WDR3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36122
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 25 Mar 2013 06:40:00 +0000 (06:40 +0000)]
ar71xx: add GPIO output select values for AR934x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36121
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 24 Mar 2013 21:07:21 +0000 (21:07 +0000)]
ar71xx: add default LED configuration for the WL-WRD3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36120
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 24 Mar 2013 19:23:47 +0000 (19:23 +0000)]
ar71xx: fix USB power GPIO on the TL-WDR3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36119
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 24 Mar 2013 19:23:45 +0000 (19:23 +0000)]
ar71xx: remove numeric suffix of the TL-WDR3500 USB LED
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36118
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 24 Mar 2013 19:23:43 +0000 (19:23 +0000)]
ar71xx: add diag support for the TL-WDR3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36117
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 24 Mar 2013 19:23:36 +0000 (19:23 +0000)]
ar71xx: add default switch configuration for the TL-WDR3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36116
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sun, 24 Mar 2013 14:01:38 +0000 (14:01 +0000)]
kernel: add missing config options for au1000 target
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36115
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sun, 24 Mar 2013 00:54:30 +0000 (00:54 +0000)]
mac80211: download file with firmware for brcmsmac
This fixes #13144.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36114
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sun, 24 Mar 2013 00:53:15 +0000 (00:53 +0000)]
mac80211: update brcmsmac ap patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36113
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sat, 23 Mar 2013 12:44:10 +0000 (12:44 +0000)]
base-files: also apply r36107 to files.old
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36112
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 22 Mar 2013 14:10:29 +0000 (14:10 +0000)]
firewall3: update to git head
* fixes parsing of src/dest '*'
* fixes parsing of proto 'all'
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36111
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 22 Mar 2013 12:52:21 +0000 (12:52 +0000)]
tools/upx: use HOSTCXX to fix build errors on mac os x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36110
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 22 Mar 2013 12:52:17 +0000 (12:52 +0000)]
build: add a HOSTCXX variable pointing at the c++ compiler
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36109
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Fri, 22 Mar 2013 10:06:10 +0000 (10:06 +0000)]
gdb: update to 7.5-2012.12-1
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36108
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Fri, 22 Mar 2013 10:06:06 +0000 (10:06 +0000)]
base-files: sysupgrade fail with eglibc
With eglibc, "ldd busybox" give us
libcrypt.so.1 => /lib/libcrypt.so.1 (0x774be000)
libm.so.6 => /lib/libm.so.6 (0x773e4000)
libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x773c0000)
libc.so.6 => /lib/libc.so.6 (0x77276000)
/lib/ld.so.1 (0x774fe000)
Thus /lib/ld.so.1 is not printed by the libs fonction and isn't copied to the 'new' root before pivot root
libs() { ldd $* | awk '{print $3}'; }
https://dev.openwrt.org/browser/trunk/package/base-files/files/lib/upgrade/common.sh
With uclibc the last line of "ldd busybox" is
ld-uClibc.so.0 => /lib/ld-uClibc.so.0 (0x77ada000)
Don't know for musl!
This patch replace https://dev.openwrt.org/changeset/19167, as glibc is gone
The other way around is to rework libs()
Please apply the fix (mine or another) on trunk and AA
Might fix https://dev.openwrt.org/ticket/12273
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36107
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 21 Mar 2013 14:56:04 +0000 (14:56 +0000)]
kernel: add missing CONFIG_BLK_DEV_IDE_AU1XXX config option.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36102
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 21 Mar 2013 14:50:59 +0000 (14:50 +0000)]
kernel: REGMAP_SPI should only be selectable when SPI_MASTER is selected
This was turned from a silent confg option without a text to a normal
config option which could be selected without any other option
depending on this. This could cause the situation where REGMAP_SPI was
selected without SPI_MASTER being selected.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36101
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 21 Mar 2013 14:25:17 +0000 (14:25 +0000)]
firewall3: update to git head
* fixes port remapping rules (#13217)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36100
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Wed, 20 Mar 2013 22:01:18 +0000 (22:01 +0000)]
brcm47xx: generate images for some more devices
These devices should be supported by trunk now.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36099
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Wed, 20 Mar 2013 21:59:24 +0000 (21:59 +0000)]
kernel: add some fixes for kernel 3.9
This patch fixes some compile problems with kernel 3.9 and adds some missing linux 3.9 handling into kernel packages.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36098
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Wed, 20 Mar 2013 21:53:51 +0000 (21:53 +0000)]
kernel: add some missing config options for kernel 3.9
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36097
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Wed, 20 Mar 2013 13:49:39 +0000 (13:49 +0000)]
netifd: Fix adding IPv6 DNS-servers to resolv.conf
In some cases IPv6 DNS-servers were not added correctly.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36095
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Wed, 20 Mar 2013 09:26:52 +0000 (09:26 +0000)]
odhcp6c: Fix metric for on-link prefix routes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36094
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 19 Mar 2013 16:18:05 +0000 (16:18 +0000)]
firewall3: update to git head
* fixes reload handling of zones and ipsets that are still running but already deleted from the config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36092
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Tue, 19 Mar 2013 14:13:39 +0000 (14:13 +0000)]
kernel: make SND_COMPRESS_OFFLOAD symbol visible for selection (#13193)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36091
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 19 Mar 2013 13:54:34 +0000 (13:54 +0000)]
firewall3: update to git head
- support network names in per-zone 'masq_src', 'masq_dest' and 'subnet' options (#13197)
- do not allow src_mac option for SNAT rules
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36090
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 18 Mar 2013 16:11:32 +0000 (16:11 +0000)]
hostapd: fix build errors on supplicant-only builds
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36085
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cyrus [Mon, 18 Mar 2013 07:24:49 +0000 (07:24 +0000)]
odhcp6c: fix preference handling, custom client-ID
* thanks to mbidewell for investigating
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36083
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 17 Mar 2013 21:12:02 +0000 (21:12 +0000)]
build: make the color of the 'configuration out of sync' warning red to make it harder for users to overlook
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36082
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 17 Mar 2013 20:47:18 +0000 (20:47 +0000)]
hostapd: initial prototype of an ubus binding
Supports listing, removing and banning clients, and hooking into
probe/assoc/auth requests via object subscribe.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36081
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 19:47:04 +0000 (19:47 +0000)]
uml: remove 3.6 kernel patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36080
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 19:46:59 +0000 (19:46 +0000)]
uml: remove 3.3. kernel patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36079
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 19:46:54 +0000 (19:46 +0000)]
uml: switch to 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36078
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 19:46:49 +0000 (19:46 +0000)]
uml: add support for 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36077
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 19:46:43 +0000 (19:46 +0000)]
uml: remove 3.2 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36076
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 19:46:37 +0000 (19:46 +0000)]
ep93xx: switch to 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36075
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 19:46:32 +0000 (19:46 +0000)]
kernel: refresh 3.9 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36074
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 19:46:25 +0000 (19:46 +0000)]
ep93xx: add support for 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36073
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 19:46:00 +0000 (19:46 +0000)]
kernel: enable SND_COMPRESS_OFFLOAD for kernels >= 3.3
Most sound SoC driver enable it and rely it on to properly work.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36072
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 19:45:55 +0000 (19:45 +0000)]
ep93xx: account for sound soc directory rename in 3.7
sound/soc/ep93xx -> sound/soc/cirrus
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36071
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 19:45:48 +0000 (19:45 +0000)]
kernel: set regmap-core module license
Fixes the following issues:
[ 7.660000] regmap_core: module license 'unspecified' taints kernel
[ 7.690000] Disabling lock debugging due to kernel
[ 7.700000] regmap_core: Unknown symbol lzo1x_decompress_safe (err 0
[ 7.710000] regmap_core: Unknown symbol lzo1x_1_compress (err 0
[ 7.720000] regmap_core: Unknown symbol devres_add (err 0
[ 7.730000] regmap_core: Unknown symbol debugfs_create_bool (err 0
[ 7.750000] regmap_core: Unknown symbol devres_alloc (err 0
[ 7.760000] regmap_core: Unknown symbol debugfs_remove_recursive (err 0
[ 7.770000] regmap_core: Unknown symbol debugfs_create_file (err 0
[ 7.780000] regmap_core: Unknown symbol devres_free (err 0
[ 7.800000] regmap_core: Unknown symbol devres_find (err 0
[ 7.810000] regmap_core: Unknown symbol debugfs_create_dir (err 0)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36070
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 19:45:42 +0000 (19:45 +0000)]
kernel: load regmap modules after kmod-lib-lzo
Otherwise regmap-core will not be able to lookup the lzo exported
symbols.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36069
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 17 Mar 2013 17:43:47 +0000 (17:43 +0000)]
ubus: update to latest version, fixes a bug in notify return code handling
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36068
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 14:33:47 +0000 (14:33 +0000)]
au1000: remove support for 3.3. kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36067
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 14:33:41 +0000 (14:33 +0000)]
au1000: switch to 3.6 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36066
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 14:33:36 +0000 (14:33 +0000)]
au1000: keep the MTX-1 watchdog pin low during boot
Do this until the watchdog driver is loaded and the user-space watchdog
daemon can start pinging the watchdog.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36065
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 14:33:23 +0000 (14:33 +0000)]
ep93xx: remove 3.3 kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36064
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 14:33:18 +0000 (14:33 +0000)]
mcs814x: use devm_request_and_ioremap in mcs814x-rng driver
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36063
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 14:33:13 +0000 (14:33 +0000)]
mcs814x: use devm_request_and_ioremap helper for nuport_mac driver
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36062
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 17 Mar 2013 14:33:07 +0000 (14:33 +0000)]
mcs814x: remove PCI code
None of the boards we support are using it nor have it wired out of the
SoC, just remove it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36061
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sat, 16 Mar 2013 22:25:47 +0000 (22:25 +0000)]
mcs814x: implement MULTI_IRQ_HANDLER
Allows us to get rid of the IRQ entry point assembly
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36060
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sat, 16 Mar 2013 22:25:41 +0000 (22:25 +0000)]
mcs814x: use the standard device tree binding to represent a PHY node
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36059
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 16 Mar 2013 16:11:43 +0000 (16:11 +0000)]
mac80211: merge a few minstrel_ht performance improvements
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36056
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 16 Mar 2013 01:25:42 +0000 (01:25 +0000)]
busybox: fix disabling /sbin/init and logread if procd is used as init
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36054
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 15 Mar 2013 22:29:27 +0000 (22:29 +0000)]
mac80211: merge a fix for a race condition on station removal
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36053
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 15 Mar 2013 16:11:45 +0000 (16:11 +0000)]
mpc85xx: add profile and build image for the TL-WDR4900 v1 board
Now that the ethernet switch is working, create firmware
images to make impatient users happy.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36051
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 15 Mar 2013 16:06:28 +0000 (16:06 +0000)]
generic: ar8216: start AR8327 switch from the probe routine
The AR8327 switch gets its configuration from platform
data or from the device-tree. This allows to start it
from the probe routine. Doing so makes it usable with
ethernet drivers which only connects to the PHY device
when the ethernet interface is opened.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36050
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 15 Mar 2013 16:06:25 +0000 (16:06 +0000)]
generic: ar8216: add ar8xxx_start helper
Move switch starting code into a separate function.
This makes it usable from other places.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36049
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 15 Mar 2013 15:53:06 +0000 (15:53 +0000)]
mpc85xx: add AR8327 initvals to the TL-WDR4900 devicetree
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36048
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 15 Mar 2013 15:50:08 +0000 (15:50 +0000)]
generic: ar8216: add OF configuration support for AR8327
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36047
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 15 Mar 2013 15:50:05 +0000 (15:50 +0000)]
generic: ar8216: separate platform_data based AR8327 code
Move platform_data specific configuration code
into a separate routine. Do it in preparation
for the upcoming OF support.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36046
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 15 Mar 2013 15:50:02 +0000 (15:50 +0000)]
generic: ar8216: don't use platform_data in ar8327_init_port
Fetch the PORT_STATUS values in ar8327_hw_init and
store those in a private data stucture for later use.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36045
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 15 Mar 2013 15:50:00 +0000 (15:50 +0000)]
generic: ar8216: move the ar8327_get_port_init_status function
It will be used in ar8327_probe routine.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36044
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 15 Mar 2013 15:49:57 +0000 (15:49 +0000)]
generic: ar8216: simplify and rename ar8327_config_port
Return with the PORT_STATUS register value instead of
writing that directly into the corresponding register.
Also rename the function to ar8327_get_port_init_status.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36043
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 15 Mar 2013 15:49:55 +0000 (15:49 +0000)]
generic: ar8216: remove superfluous pdata checks
The presence of the platform data is already verified in
ar8327_hw_init, and the driver does not start without that
anyway.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36042
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 15 Mar 2013 15:22:06 +0000 (15:22 +0000)]
ath9k: add a fix to reduce the number of spurious tx hang detections
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36040
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 15 Mar 2013 14:39:51 +0000 (14:39 +0000)]
kernel: update linux 3.8 to 3.8.3
Also refresh the related generic/platform patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36039
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 15 Mar 2013 14:35:52 +0000 (14:35 +0000)]
ar71xx: build images for the TL-MR11U v2
[juhosg: use different profile name for v1 and v2, and add
multi profile to build for both versions]
Signed-off-by: Guilhem Lettron <guilhem@lettron.fr>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36038
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 15 Mar 2013 14:35:50 +0000 (14:35 +0000)]
ar71xx: rw2458n - Use eeprom (art) from wifi card
Use eeprom (art) from included wifi card, not hard coded in flash.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36037
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 15 Mar 2013 14:35:48 +0000 (14:35 +0000)]
ar71xx: Error fix in Kernel for MR3420v2 Ethernet Switch configuration
Error in using another MDIO (AP123 platform using only one GE1 device
for eth0 and eth1) for the router mr3420v2.
?onfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779
Routers in this sense are the same and the only difference is: USB
port, USB led, instead of the GPIO-switch we have GPIO-button.
Signed-off-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36036
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 15 Mar 2013 13:58:47 +0000 (13:58 +0000)]
ath9k: fix issues with disabling rx/tx antennas
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36035
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 15 Mar 2013 13:43:55 +0000 (13:43 +0000)]
uhttpd: update to latest version, fixes an occasional crash on CGI scripts
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36034
3c298f89-4303-0410-b956-
a3cf2f4a3e73
luka [Fri, 15 Mar 2013 01:36:53 +0000 (01:36 +0000)]
[package] uboot-envtools: upgrade to version 2013.01.01
Signed-off-by: Luka Perkov <luka@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36033
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:44:03 +0000 (18:44 +0000)]
[procd] fix up the mount options to match what openwrt had before using procd as pid 1
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36032
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:43:58 +0000 (18:43 +0000)]
[base-files] sysupgrade was broken as procd was getting killed
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36031
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:43:54 +0000 (18:43 +0000)]
[lantiq] ACMP252: fix USB-enable GPIO and use default PCI configuration for now
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove
ralink_eep from the dts.
USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force).
PCI works with default settings as long as the vendor bootloader is used.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36030
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:43:49 +0000 (18:43 +0000)]
[lantiq] fix buttons on vr9 eval kit
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36029
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:43:44 +0000 (18:43 +0000)]
[lantiq] select vdsl packages on vr9 boards
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36028
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:43:39 +0000 (18:43 +0000)]
[lantiq] fix fritzbox 3370 partitions/memory/cmdline
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36027
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:43:34 +0000 (18:43 +0000)]
[lantiq] build jffs images for nand based fritzbox
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36026
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:43:29 +0000 (18:43 +0000)]
[lantiq] add vdsl firmware loader/cutter
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36025
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:43:23 +0000 (18:43 +0000)]
[lantiq] add vdsl mei driver
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36024
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:43:18 +0000 (18:43 +0000)]
[lantiq] add vdsl driver
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36023
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:43:13 +0000 (18:43 +0000)]
[lantiq] add vdsl userland app
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36022
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:43:07 +0000 (18:43 +0000)]
[lantiq] make DEU work with v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36021
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:43:02 +0000 (18:43 +0000)]
[lantiq] make lib-ifxos work with v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36020
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:42:57 +0000 (18:42 +0000)]
[lantiq] make hcd driver work with v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36019
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:42:52 +0000 (18:42 +0000)]
[lantiq] make ptm drivers work with v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36018
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:42:47 +0000 (18:42 +0000)]
[lantiq] make atm driver work with v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36017
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:42:43 +0000 (18:42 +0000)]
[lantiq] make adsl work with v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36016
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:42:38 +0000 (18:42 +0000)]
[lantiq] make adsl mei driver work with v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36015
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:42:29 +0000 (18:42 +0000)]
[lantiq] bump to v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36014
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Thu, 14 Mar 2013 18:42:21 +0000 (18:42 +0000)]
[lantiq] move GPHY FW blobs to non versioned folder
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36013
3c298f89-4303-0410-b956-
a3cf2f4a3e73
projects / openwrt.git / log