brcm47xx: various fixes and code cleanups for irq code
[openwrt.git] / target /
2013-01-03 haukebrcm47xx: various fixes and code cleanups for irq code
2013-01-03 haukebrcm47xx: add bgmac driver
2013-01-03 haukebrcm47xx: build b44 as a module
2013-01-03 haukebrcm47xx: run ifup before starting the switch
2013-01-03 haukebrcm47xx: BCMA - IRQ Update - Fix IRQ Flag for I2S...
2013-01-03 haukebrcm47xx: improve IRQ handling for bcma based devices
2013-01-03 haukebrcm47xx: add a new version of the nvram rewrite patch
2013-01-03 haukebrcm47xx: move patches already in the mainline kernel...
2013-01-03 haukebrcm47xx: remove support for kernel version 3.3
2013-01-02 jowgeneric: add some missing kernel config symbols spotted...
2013-01-02 nbdx86: fix typo in alix2/net5501 default packages
2013-01-02 blogic[ramips] rt5350 switch support fix
2013-01-02 juhosggeneric: fix UBIFS build error if XZ compression is...
2013-01-01 juhosgadm5120: add support for 3.7
2013-01-01 juhosgadm5120: nuke 3.3 support
2013-01-01 juhosgadm5120: switch to 3.6
2013-01-01 juhosgadm5120: add support for 3.6
2013-01-01 juhosgadm5120: remove NAND_NO_AUTOINCR flag from rb1xx.c
2013-01-01 juhosgadm5120: use mtd_read helper in trxsplit.c
2013-01-01 juhosgadm5120: don't include asm/system.h in adm5120-hcd.c
2013-01-01 juhosggeneric: add missing symbol for 3.7
2013-01-01 juhosgar71xx: register the NAND flash controller device on...
2013-01-01 juhosgar71xx: allow to register the NAND flash controller...
2013-01-01 juhosgar71xxx: allow to select ATH79_DEV_NFC for QCA955x
2013-01-01 juhosgar71xxx: allow to build the ar934x_nfc driver for QCA955x
2013-01-01 juhosgar71xx: fix NAND controller base for QCA955x SoCs
2013-01-01 juhosgar71xx: fold AP135 patch
2012-12-30 blogic[lantiq] adds missing symbol
2012-12-30 blogic[lantiq] fixes usb port on arv 4518
2012-12-30 juhosgramips: rt305x: fix garbled name in mach-mzk-w300nh2.c
2012-12-29 juhosgramips: build firmware image for the Planex MZK-W300NH2...
2012-12-29 juhosgramips: add user-space support for the Planex MZK-W300N...
2012-12-29 juhosgramips: rt305x: add kernel support for the Planex MZK...
2012-12-29 juhosgramips: build image for Airlive AIR3GII
2012-12-29 juhosgramips: add user-space support for Airlive AIR3GII
2012-12-29 juhosgramips: rt305x: add kernel support for AirLive AIR3GII
2012-12-29 juhosgar71xx: add support for 3.7
2012-12-29 juhosgar71xx: Build the AP135 images
2012-12-29 juhosgar71xx: Add userspace support for AP135
2012-12-29 juhosgar71xx: Add support for AP135
2012-12-29 juhosgar71xx: use a backported patch to fix AR933x UART baud...
2012-12-28 nbdar71xx: change the unaligned access hack to assume...
2012-12-28 nbdmips: use -mno-branch-likely for kernel and userspace...
2012-12-27 nbdkernel: remove the cisco SIP NAT patch, at least on...
2012-12-27 haukebrcm47xx: bcma: correct M25P32 serial flash ID
2012-12-26 juhosgmpc83xx: add support for 3.7
2012-12-26 juhosgmpc83xx: nuke 3.3 support
2012-12-26 juhosgmpc83xx: switch to 3.6.11
2012-12-26 juhosgmpc83xx: add support for 3.6
2012-12-26 juhosgmpc83xx: create package for the rbppc_cf module
2012-12-26 juhosggeneric: more missing symbols for 3.{6,7}
2012-12-26 juhosgar71xx: build image for the AP136-020
2012-12-26 juhosgar71xx: add user-space support for AP136-020
2012-12-26 juhosgar71xx: add kernel support for the AP136-020 board
2012-12-26 juhosgar71xx: rename AP136 to AP136-010
2012-12-25 juhosgar71xx: dynamically set AR8327's PAD configuration...
2012-12-25 juhosggeneric: ar8216: add sgmii_delay_en field to ar8327_pla...
2012-12-25 juhosgar71xx: ag71xx: show PHY interface mode in dmesg
2012-12-24 juhosgramips: fix ASUS WL-330N3G MAC address
2012-12-24 juhosgramips: fix wifi EEPROM extraction on DIR-615-Dx models
2012-12-23 kaloz[cns3xxx]: add nol2x0 cmdline to disable l2x0 cache
2012-12-22 juhosggeneric: ar8216: don't use 0 as default VID on AR8327
2012-12-22 juhosggeneric: more missing symbols for 3.{6,7}
2012-12-22 juhosgramips: unify eeprom file name for the built-in wireles...
2012-12-22 juhosgramips: rt3883: fix build error
2012-12-22 juhosgar71xx: register the second ethernet interface on the...
2012-12-22 juhosgar71xx: fix ethernet device registration for QCA9558
2012-12-22 juhosgar71xx: rename QCA9558 ETH_CFG bit defines
2012-12-22 juhosgar71xx: fixup allowed PHY interface types for QCA9558
2012-12-22 juhosgar71xx: don't assign any MII bus device on QCA9558...
2012-12-22 juhosgar71xx: ag71xx: fix mii_bus_dev sanity check
2012-12-22 juhosgar71xx: ag71xx: don't start/stop built-in switch w...
2012-12-22 juhosggeneric: ar8316: allow to configure port 6 via platform...
2012-12-22 juhosggeneric: ar8216: rename cpuport_cfg to port0_cfg in...
2012-12-22 juhosgramips: add support for 3.7
2012-12-22 juhosgramips: convert to use {e,o}hci-platform driver
2012-12-22 juhosggeneric/3.6: add platform specific power callbacks...
2012-12-22 blogic[lantiq] ar9 did not load atm driver properly
2012-12-21 blogic[lantiq] dont use input layer for gpio buttons
2012-12-21 blogic[lantiq] default switch setup for WBMR
2012-12-21 blogic[lantiq] Setting the MDC clock to 2.5MHz and changing...
2012-12-21 blogic[lantiq] adds script to set wps info on boards with...
2012-12-21 blogic[lantiq] minor tweaks to WBMR image
2012-12-21 blogic[lantiq] add missing PHY_BASIC_FEATURES to 100mbit...
2012-12-21 blogic[lantiq] fix typo inside fritz3370 devicetree file
2012-12-21 blogic[lantiq] more devicetree fixes
2012-12-21 blogic[lantiq] improve button handling
2012-12-21 blogic[lantiq] add phy-reset gpio handling to xrx200-net
2012-12-21 blogic[lantiq] add more lantiq phy ids based on daniels uboot...
2012-12-21 blogic[lantiq] refresh patch and install v1.1 gphy blobs
2012-12-21 blogic[kernel] make to rtl8366_smi of binding use gpio_is_valid
2012-12-21 juhosgkernel: add solos-pci update for 3.3
2012-12-20 juhosgrb532: add support for 3.7
2012-12-20 juhosgramips: Add USB support for DAP-1350 platform.
2012-12-20 juhosgrb532: nuke 3.3 support
2012-12-20 juhosgrb532: switch to 3.6.11
2012-12-20 juhosgrb532: add support for 3.6
2012-12-20 juhosgppc44x: add support for 3.7
2012-12-20 juhosgkernel: add solos-pci patches from 3.8 for new hardware
2012-12-20 juhosglinux: add missing symbols for 3.{6,7}
next