base-files: diag does not need to insmod any drivers, procd already did it for us
[openwrt.git] / target / linux / ramips /
2013-06-21 blogicbase-files: diag does not need to insmod any drivers...
2013-06-10 blogicramips: add HAME MPR-A2 support
2013-06-10 blogicramips: add support for belkin F7C027 wemo/homeautomati...
2013-05-30 blogicramips: set correct description for rt305x subtarget
2013-05-26 juhosgkernel: update linux 3.8 to 3.8.13
2013-05-12 jogokernel: move CONFIG_MIPS_SEAD3 to generic
2013-05-08 juhosgkernel: update linux 3.8 to 3.8.12
2013-05-07 blogicramips: drop 3.7 support
2013-05-07 blogicramips: properly setup the FEATURES variable
2013-05-06 blogicramips: fix memory detection rt5350
2013-05-06 blogicramips: enable dsp extensions for rt305x and rt3883
2013-05-06 blogicramips: fix fypo in ethernet driver rt288x, rt3883
2013-05-06 blogicramips: Update ARC Freestation profile
2013-05-06 blogicramips: Support setting active_low in devicetree gpio...
2013-05-06 blogicralink: unbreak uart pinmux handling
2013-05-06 blogicramips: fix gpio base numbering
2013-05-06 blogicramips: add gpio base properties to dtsi files
2013-05-06 blogicramips: unbreak rt2880 support
2013-05-06 blogicramips: fix DIR-602D1 flash size
2013-05-04 blogicramips: unbreak gpio handling for uart mux group
2013-05-01 juhosgkernel: update linux 3.8 to 3.8.11
2013-04-30 juhosgkernel: update linux 3.8 to 3.8.10
2013-04-30 blogicramips: move dlink profile to correct sub folder -...
2013-04-30 blogicramips: move dlink profile to correct sub folder
2013-04-26 juhosgkernel: update linux 3.8 to 3.8.9
2013-04-26 juhosgramips: rt3883: fix build error
2013-04-25 blogicramips: remove now unneeded user-space board detection
2013-04-25 blogicramips: introduce DTS for ALL5003
2013-04-25 blogicramips: set preinit interface to eth0 by default.
2013-04-25 blogicramips: Add Alpha ASL-26555 support.
2013-04-25 blogicramips: Add support of D-link DIR-620D1
2013-04-25 blogicramips: sync kernel patches with the mips-next tree
2013-04-19 juhosgkernel: update linux 3.8 to 3.8.8
2013-04-17 blogic[ramips] fix prepare_generic_squashfs
2013-04-16 blogic[ramips] fix rt305x gpio
2013-04-14 juhosgkernel: update linux 3.8 to 3.8.7
2013-04-12 blogic[ramips] update rt2880 config-3.8
2013-04-12 blogic[ramips] fix up the rt2880 patches
2013-04-12 blogic[ramips] fix RT-N15 support
2013-04-12 blogic[ramips] update rt2880.dtsi
2013-04-09 blogic[ramips] unbreak portmapping - typo fix
2013-04-09 blogic[ramips] move memory detect node to dtsi files
2013-04-09 blogic[ramips] Add Netgear WNCE2001 (OF version)
2013-04-09 blogic[ramips] remove bootargs from dts
2013-04-09 blogic[ramips] add ofpart info to the devicetrees
2013-04-09 blogic[ramips] add sample swconfig portmap
2013-04-09 blogic[ramips] set of_node before registring the switch
2013-04-08 juhosgramips: TEW-691GR.dts fixes
2013-04-08 juhosgramips: rt3883: enable the AR8216 driver
2013-04-08 juhosgramips: add profile for the Omnima EMB-HPM board
2013-04-08 juhosgramips: OMNI-EMB-HPM.dts fixes
2013-04-08 juhosgramips: add mdio-bus node to rt3883.dtsi
2013-04-08 juhosgramips: fix MDIO/PHY handling
2013-04-08 juhosgramips: fix console speed for OMNI-EMB-HPM
2013-04-08 juhosgramips: avoid invalid pointer dereference in pinmux...
2013-04-08 juhosgramips: TEW-692GR.dts fixes
2013-04-07 juhosgramips: add PCI node into RTN56U.dts
2013-04-07 juhosgramips: add PCI node for rt3883.dtsi
2013-04-07 juhosgramips: rt3883: enable PCI support
2013-04-07 juhosgramips: fix RT3883 PCI driver
2013-04-07 juhosgramips: refresh patches
2013-04-07 juhosgramips: add missing cpu-feature-override.h files
2013-04-07 juhosgramips: fix broken patch name
2013-04-07 juhosgramips: fix polarity of GPIO buttons for RT-N56U
2013-04-07 juhosgramips: add nor-flash node for the RT-N56U
2013-04-07 juhosgramips: fix pinmux settings for the RT-N56U
2013-04-07 juhosgramips: pinmux fixes
2013-04-07 juhosgramips: remove trailing whitespaces from dts files
2013-04-07 juhosgramips: handle PCI interrupts in plat_irq_dispatch
2013-04-07 blogic[ramips] fix typos inside dts files
2013-04-07 blogic[ramips] fix default commandline in dts files
2013-04-07 juhosgramips: add cfi_cmdset_0002 patches
2013-04-07 juhosgramips: remove top-level {address,size}-cells propertie...
2013-04-06 juhosgramips: fix ethernet switch node in DIR-645.dts
2013-04-06 juhosgramips: remove spi node from RTN56.dts
2013-04-06 juhosgramips: fix ethernet switch node in RTN56U.dts
2013-04-06 juhosgramips: rt3883: enable the RTL8367 driver
2013-04-06 juhosgramips: rt3883: sync 3.8 config
2013-04-06 blogic[ramips] fix typo pinmmux -> pinmux
2013-04-06 juhosgkernel: update linux 3.8 to 3.8.6
2013-04-05 blogic[ramips] fix dir-615 h1 network config
2013-04-05 blogic[ramips] fix typo that made gpiomuxing fail
2013-04-03 blogic[ramips] add profile for tenda w150m board
2013-04-03 blogic[ramips] fix ALL5002 default package selection
2013-04-03 blogic[ramips] Build WW factory image for DAP-1350
2013-04-03 blogic[ramips] add Huawei D105
2013-04-03 blogic[ramips] add profile for the Edimax 3g-6200NL board
2013-04-03 blogic[ramips] there is no ttyS1 console
2013-04-03 blogic[ramips] make v3.8 the default
2013-04-03 blogic[ramips] add new image/Makefile
2013-04-03 blogic[ramips] add the dts files that describe the boards...
2013-04-03 blogic[ramips] fix upvel profile names
2013-04-03 blogic[ramips] fix rt3883 config-3.8
2013-04-03 blogic[ramips] fix rt305x config-3.8
2013-04-03 blogic[ramips] mark rt288x broken until the test hardware...
2013-04-03 blogic[ramips] add patches for v3.8
2013-04-03 blogic[ramips] remove old ralink 3.8 patches
2013-04-03 blogic[ramips] move files to files-3.7
2013-04-03 blogic[ramips] add feature gpio
2013-03-15 juhosgkernel: update linux 3.8 to 3.8.3
next