rpcd: iwinfo plugin fixes
[openwrt.git] / target / linux / lantiq / base-files /
2016-05-10 lukaimage / basefiles: make console password configurable
2016-04-26 blogiclantiq: Fix typo in LED diag script.
2016-04-09 blogiclantiq-dsl: add missing blank in dsl output
2016-04-09 blogiclantiq-dsl: bugfix latency values swapped for lucistat
2016-04-09 blogiclantiq-dsl: bugfix db negative sign after comma
2016-03-07 nbdlantiq: print profile name in dsl lucistat
2016-03-07 nbdlantiq: do not set default firmware file
2016-02-12 blogicuse "-gt" instead of ">" with [ in /lib/functions/lanti...
2016-01-18 haukelantiq: add support for TP-Link VR200v
2016-01-18 nbdlantiq: fix VDSL device detection with Linux 4.4
2016-01-01 blogiclantiq: match default xdsl mode and default wan interface
2016-01-01 blogiclantiq: convert vendorid into human readable form
2016-01-01 blogiclantiq: add the current profile to the stats output
2016-01-01 blogiclantiq: use devicename:colour:function led naming scheme
2016-01-01 blogiclantiq: add support for indicating the boot state using...
2016-01-01 blogiclantiq: use dsl led defined in DTS
2016-01-01 blogiclantiq: use power leds defined in DTS
2016-01-01 blogiclantiq: use default leds defined in DTS
2016-01-01 blogiclantiq: BTHOMEHUBV2B - remove missing usb led workaround
2015-12-17 blogiclantiq: Fix LED handling.
2015-12-11 jowall: drop old uci-defaults.sh
2015-12-11 blogiclantiq: fix led setup after switch to uci-defaults...
2015-12-06 jowlantiq: fix logic error in dsl board.d code
2015-12-05 nbdlantiq: add VDSL2 vectoring status information
2015-12-05 nbdlantiq: get rid of the dsl_fw mtd partition
2015-12-04 nbdlantiq: move esi calls to dsl_cpe_control scripts to...
2015-12-04 jowlantiq: switch from uci-defaults to board.d
2015-10-19 blogiclantiq: Synchronize access to the DSL command pipe
2015-10-11 blogiclantiq: bugfix wrong non pre-emptive crc errors output
2015-10-07 blogiclantiq: bugfix luci lantiq_dsl status
2015-10-05 blogiclantiq: several ARV7519RW22 fixes
2015-10-05 blogiclantiq: Add target TP-Link TD-W8980
2015-10-05 blogiclantiq: bugfix uninitialized variables
2015-09-15 rmileckilantiq: update list on NAND devices in platform_pre_upgrade
2015-09-15 blogiclantiq: add platform_pre_upgrade for sysupgrade
2015-09-14 blogiclantiq: get more status information from xDSL
2015-07-07 blogiclantiq: Add support for Arcadyan ARV8539PW22 (Speedport...
2015-07-07 blogiclantiq: Add support for the BT Home Hub 5A
2015-06-05 blogiclantiq: Add support for Arcadyan VGV7510KW22 (known...
2015-02-09 blogiclantiq: td-w8970: fix failsafe mode
2015-01-18 blogiclantiq: DGN3500 cleanups
2015-01-18 blogiclantiq: Fix initscript issue
2015-01-17 blogicAdd profile and userspace for P2812HNUF1/3, switch...
2015-01-08 blogiclantiq: BT Home Hub 3A - userspace
2015-01-08 blogiclantiq: Fix adsl led on Home Hub 2B
2014-11-14 blogiclantiq: vgv7519 - set some defaults for leds
2014-11-14 blogiclantiq: set default led configuration from /sys entry...
2014-10-29 blogiclantiq: vgv7519: fix board_config on dts, read mac...
2014-10-29 blogiclantiq_dsl.sh: properly detect vdsl_cpe_control and...
2014-10-06 blogiclantiq - vgv7519: load rt5362 eeprom from bootloader...
2014-10-06 blogiclantiq: led name has changed from adsl -> dsl
2014-09-16 blogicLantiq: fix build warning from dsl_fs script
2014-09-15 blogiclantiq: add default switch setup to td8970
2014-08-18 blogiclantiq: improve ARV7519RW22 support
2014-07-14 blogiclantiq: detect board in preinit state
2014-07-10 blogiclantiq: generate /tmp/sysinfo/lantiq_board_name if...
2014-07-10 blogiclantiq: enable SysupgradeNAND for BTHOMEHUBV2B
2014-07-02 blogiclantiq: add support for /tmp/sysinfo
2014-06-02 blogictarget/linux/*/base-files/lib/upgrade/platform.sh ...
2014-05-06 nbdlantiq: support loading the dsl firmware from a flash...
2014-04-11 blogiclantiq: more vdsl related cleanups
2014-04-10 blogiclantiq: move the dsl-modem config to network.@dsl-modem[-1]
2014-04-09 blogiclantiq: make dsl_notify.sh executable
2014-04-05 blogiclantiq: cleanup the dsl control scripts
2014-04-03 blogiclantiq: BT Home Hub 2B support - userspace
2014-03-30 blogiclntiq: add support for Astoria ARV7519RW.
2014-03-30 blogiclantiq: do an endianness swap to the RT2860 eeprom...
2014-03-30 blogiclantiq: add esi
2014-03-30 blogiclantiq: fix initial VLAN conf for P2601HNFX
2014-03-30 blogiclantiq: add support for Arcadyan ARV7519PW
2014-03-30 blogiclantiq: add support for ZyXEL P2812HNUFX
2014-01-15 blogiclantiq: Add support for Astoria ARV7510PW22
2014-01-12 blogiclantiq: improve Arcadyan ARV4510PW support
2013-11-11 blogiclantiq: DGN3500 fixups
2013-11-11 blogiclantiq: remove old hotplug handler
2013-11-07 blogiclantiq: fix TDW8970 lan/wan mac
2013-11-07 blogiclantiq: Fix ar8216 switch configuration for WBMR-HP...
2013-10-08 blogiclantiq: fix up diag.sh
2013-09-19 lukalantiq: add support for ZyXEL P2601HNFX
2013-09-19 lukalantiq: add support for ZTE H201L
2013-09-17 blogiclantiq: add v3.10 patches
2013-08-06 blogiclantiq: add tplink header id to sysupgrade and fix...
2013-08-06 lukalantiq: add (incomplete) support for Aztech GR7000
2013-08-05 blogiclantiq: several a803 related fixes
2013-08-01 blogiclantiq: fix VG3503J ethernet/gphy led support
2013-07-25 blogiclantiq: add a hook to make leds work on the secondary...
2013-07-15 nbdlantiq: update ralink wlan firmware hotplug script...
2013-06-10 blogiclantiq: diag.sh with both red and green power LEDs
2013-05-30 blogiclantiq: Fix ar8216 switch configuration
2013-05-30 blogiclantiq: DGN3500 support
2013-05-30 blogiclantiq: fix LED-handling oversights
2013-04-25 blogiclantiq: make leds and network work on VG3503J
2013-04-25 blogiclantiq: fix board detection helpers
2013-04-09 cyrusAdapt default network configuration for IPv6
2013-04-03 blogic[lantiq] Migrate lantiq platform to common led helper...
2013-03-12 blogic[lantiq] add support for AudioCodes AC-252
2013-01-18 jowall targets: use numerically prefixed uci-defaults...
2012-12-21 blogic[lantiq] default switch setup for WBMR
2012-12-21 blogic[lantiq] adds script to set wps info on boards with...
2012-12-21 blogic[lantiq] improve button handling
next