oxnas: add missing semicolon
[openwrt.git] / target / linux / at91 /
2016-02-16 blogicat91: udc driver was missing deps
2016-01-25 nbdbase-files: remove default /etc/config/network, generat...
2016-01-19 blogicat91: drop v3.18
2016-01-19 blogicat91: move to 4.4 kernel
2016-01-19 blogicat91: fix typo in usb kernel module makefile
2016-01-19 blogicat91: remove SAMA5D3 from Default image build.
2016-01-19 blogicat91: add package for high speed usb device
2016-01-19 blogicat91: add 4.4 support
2015-12-11 jowall: drop old uci-defaults.sh
2015-12-04 jowall: remove redundant board.d/00_model files
2015-12-03 jowat91: switch from uci-defaults to board.d
2015-08-17 blogicat91: fix usb rate backport patch tab mangle
2015-08-17 blogicat91: Backport determine_rate prototype fix
2015-07-04 florianat91: add Device Tree based board detection
2015-07-04 florianat91: sama5d3: enable USB2 by default
2015-07-04 florianat91: enable Micrel PHY driver
2015-05-28 jowat91: fix imagebuilder
2015-05-21 jogokernel: update 3.18 to 3.18.14
2015-03-06 blogickernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
2015-03-06 blogickernel: disbale HAMRADIO in generic config
2015-03-05 blogicat91: add SAMA5D3-Xplained board UBI parameters to...
2015-02-19 blogicat91: Add dts for Exegin Q5x boards.
2015-02-19 blogicat91: USB gadget subsystem cleanup and driver fix.
2015-02-19 blogicat91: Enable power and reset controller drivers.
2015-02-18 blogicat91: bump to v3.18
2014-12-13 nbdat91: remove linux 3.10 support
2014-10-24 nbdkernel: makefiles: make use of new var KERNEL_PATCHVER
2014-10-13 blogicat91: fix at91-adc dependencies
2014-10-06 blogicat91: remove support for TQMa9263
2014-09-13 haukekernel: do not deactivate CONFIG_BLK_DEV
2014-09-10 lukakernel: update 3.14 to 3.14.18
2014-09-03 florianat91: build images for AT91SAMA5D3XPLAINED
2014-09-03 florianat91: add SAMA5D3 subtarget
2014-09-03 florianat91: move legacy Kconfig options to subtarget
2014-09-03 florianat91: switch to 3.14
2014-09-03 florianat91: add 3.14 support
2014-09-03 florianat91: move 3.10 specific files and patches
2014-09-03 florianat91: add Kconfig symbol for CONFIG_USB_ATMEL_USBA
2014-09-03 florianat91: fix typo on Calao
2014-09-03 florianat91: create a legacy subtarget
2014-07-21 blogictarget/linux/*/image/Makefile: use new dts path variable
2014-07-20 blogickernel: update to 3.10.49
2014-07-13 juhosgkernel: sort Kconfig options in kernel configs
2014-06-26 blogickernel: update 3.10.36->3.10.44
2014-06-11 blogickernel: make sure the new UBIBLOCK symbol does not...
2014-05-08 haukekernel: modify mtd related patches for 3.14
2014-04-29 haukeat91: Add AT91 board and model name to /tmp/sysinfo
2014-04-29 haukeat91: AT91SAM9G20-EK fixes
2014-04-29 haukeUpdate AT91 kernel to 3.10.34
2013-11-17 haukeat91: fix typo in network file
2013-10-01 haukeat91: fix missing drivers/iio/adc/at91-adc.ko in kmod...
2013-09-26 nbdbuild: unify arm target cflags
2013-07-29 nbdbuild: unify target independent optimization options
2013-06-05 jogotarget: don't build jffs2 nor images by default
2013-05-26 juhosgkernel: update linux 3.8 to 3.8.13
2013-05-08 juhosgkernel: update linux 3.8 to 3.8.12
2013-05-03 juhosgat91: build .dtb file for the CalAmp LMU500 board
2013-05-01 juhosgkernel: update linux 3.8 to 3.8.11
2013-04-30 juhosgkernel: update linux 3.8 to 3.8.10
2013-04-30 juhosgat91: add missing config symbols
2013-04-26 juhosgkernel: update linux 3.8 to 3.8.9
2013-04-26 juhosgat91: upgrade to kernel 3.8.7 and use devicetree
2013-04-17 nbdbuild: consistently use 'depends on' instead of 'depends'
2013-01-14 floriantarget: enable XZ BCJ decompressor code after r35097
2012-10-29 juhosgtarget: refresh all target configs with kconfig.pl
2012-10-11 blogic[kernel] gpiodev/gpioctl RIP
2012-09-28 blogic[kernel] dont explicitly select wireless-tools. rely...
2012-07-29 florian[at91] move i2c module to target modules.mk
2012-07-28 blogic[kernel] clean up pwm patches and drivers
2012-06-05 blogic[kernel] bump to 3.3.8
2012-05-23 juhosgkernel: update linux 3.3 to 3.3.7
2012-05-15 juhosglinux: move certain disabled symbols to the generic...
2012-05-14 juhosgkernel: update linux 3.3 to 3.3.6
2012-05-07 juhosgkernel: update linux 3.3 to 3.3.5
2012-04-30 juhosgkernel: update linux 3.3 to 3.3.4
2012-04-24 jogokernel: update linux 3.3 to 3.3.3
2012-04-22 claudio[at91] flexibity: Cleanup the subtarget config
2012-04-22 claudio[at91] tqma9263: update board definition for 3.x series...
2012-04-22 claudio[at91] Remove old netus board definition
2012-04-20 claudio[at91] Reorganize the subtargets, group subtargets...
2012-04-20 claudio[at91] Update the kernel to 3.3.x series, remove patche...
2012-04-20 claudio[at91] Ensure that the bin directory exists before...
2012-04-15 haukeat91: Missing kernel config symbols for AT91 target...
2011-11-25 nicotargets: fix CONFIG_USB_STORAGE_* inconsistency
2011-11-10 jowbase-files, target: assign name to system timeserver...
2011-11-04 jowadd timeserver config to target specific system configs...
2011-07-03 blogicAT91: flexibity: add system uci file
2011-07-03 blogicAT91: Add flexibity board support
2011-06-18 haukekernel: update to kernel 2.6.38.8
2011-05-15 haukekernel: update kernel from 2.6.38.2 to 2.6.38.6 and...
2011-04-09 haukeat91: add some missing config options
2011-03-28 mbUpdate 2.6.38 to 2.6.38.2
2011-03-26 nbdglobal cflags: remove -funit-at-a-time, it is ignored...
2011-03-20 claudio[at91] Update to 2.6.38
2011-03-07 kalozonly support EABI on ARM targets
2011-02-19 florian[kernel] update to 2.6.35.11
2011-02-01 kalozconfig symbol cleanup
2011-01-27 jow[at91] move Netus G20 into a subtarget and rework tople...
2011-01-27 jow[at91] prepare TQMa9263 subtarget
2011-01-27 jow[at91] add TQMa9263 board setup
next