From: luka <luka@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Fri, 8 Aug 2014 13:38:27 +0000 (+0000)
Subject: imx6: backport IMX6DL DVFS support from 3.15
X-Git-Url: https://git.archive.openwrt.org/?p=openwrt.git;a=commitdiff_plain;h=faf8d4688b74c1be28a8dde71447b5219700f49e

imx6: backport IMX6DL DVFS support from 3.15

This allows dynamic voltage and frequency scaling to work for IMX6DL CPU's.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42072 3c298f89-4303-0410-b956-a3cf2f4a3e73
---

diff --git a/target/linux/imx6/patches-3.14/0004-ARM-dts-imx6dl-enable-cpufreq-support.patch b/target/linux/imx6/patches-3.14/0004-ARM-dts-imx6dl-enable-cpufreq-support.patch
new file mode 100644
index 0000000000..be5eefbfa5
--- /dev/null
+++ b/target/linux/imx6/patches-3.14/0004-ARM-dts-imx6dl-enable-cpufreq-support.patch
@@ -0,0 +1,47 @@
+From 978ed904c17cd39700a5e1f95ee29ef4fee08ce9 Mon Sep 17 00:00:00 2001
+From: Anson Huang <b20788@freescale.com>
+Date: Thu, 19 Dec 2013 10:02:10 -0500
+Subject: [PATCH] ARM: dts: imx6dl: enable cpufreq support
+
+This patch adds cpufreq dts for i.mx6dl to support cpufreq driver.
+
+Signed-off-by: Anson Huang <b20788@freescale.com>
+Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
+---
+ arch/arm/boot/dts/imx6dl.dtsi | 20 ++++++++++++++++++++
+ 1 file changed, 20 insertions(+)
+
+diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
+index 80d0abe..9c4942f 100644
+--- a/arch/arm/boot/dts/imx6dl.dtsi
++++ b/arch/arm/boot/dts/imx6dl.dtsi
+@@ -22,6 +22,26 @@
+ 			device_type = "cpu";
+ 			reg = <0>;
+ 			next-level-cache = <&L2>;
++			operating-points = <
++				/* kHz    uV */
++				996000  1275000
++				792000  1175000
++				396000  1075000
++			>;
++			fsl,soc-operating-points = <
++				/* ARM kHz  SOC-PU uV */
++				996000	1175000
++				792000	1175000
++				396000	1175000
++			>;
++			clock-latency = <61036>; /* two CLK32 periods */
++			clocks = <&clks 104>, <&clks 6>, <&clks 16>,
++				 <&clks 17>, <&clks 170>;
++			clock-names = "arm", "pll2_pfd2_396m", "step",
++				      "pll1_sw", "pll1_sys";
++			arm-supply = <&reg_arm>;
++			pu-supply = <&reg_pu>;
++			soc-supply = <&reg_soc>;
+ 		};
+ 
+ 		cpu@1 {
+-- 
+2.0.3
+