From: blogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Tue, 8 Mar 2016 18:11:59 +0000 (+0000)
Subject: ramips: add support for Planex MZK-WDPR.
X-Git-Url: https://git.archive.openwrt.org/?p=openwrt.git;a=commitdiff_plain;h=e08da2926d9a37dec93a4f6376cc577a58afd88e

ramips: add support for Planex MZK-WDPR.

add support for Planex MZK-WDPR.
MZK-WDPR(MZK-WDPR-R01) is internet radio tuner.
This patch is "network board" in MZK-WDPR.
LCD board is non OpenWrt Platform.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48968 3c298f89-4303-0410-b956-a3cf2f4a3e73
---

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 2312811078..ac5a312d84 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -114,6 +114,7 @@ ramips_setup_interfaces()
 	f5d8235-v1|\
 	f5d8235-v2|\
 	hg255d|\
+	mzk-wdpr|\
 	jhr-n805r|\
 	jhr-n825r|\
 	jhr-n926r|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 5f293be2d1..3fdb5627e3 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -283,6 +283,9 @@ ramips_board_detect() {
 	*"MZK-W300NH2"*)
 		name="mzk-w300nh2"
 		;;
+	*"MZK-WDPR"*)
+		name="mzk-wdpr"
+		;;
 	*"NA930")
 		name="na930"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 7812f04048..e01f9ce7f6 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -84,6 +84,7 @@ platform_check_image() {
 	mt7628|\
 	mzk-dp150n|\
 	mzk-w300nh2|\
+	mzk-wdpr|\
 	nbg-419n|\
 	nw718|\
 	oy-0001|\
diff --git a/target/linux/ramips/dts/MZK-WDPR.dts b/target/linux/ramips/dts/MZK-WDPR.dts
new file mode 100644
index 0000000000..ba9ae85900
--- /dev/null
+++ b/target/linux/ramips/dts/MZK-WDPR.dts
@@ -0,0 +1,76 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+	compatible = "MZK-WDPR", "ralink,rt3052-soc";
+	model = "Planex MZK-WDPR";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	cfi@1f000000 {
+		compatible = "cfi-flash";
+		reg = <0x1f000000 0x800000>;
+
+		bank-width = <2>;
+		device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@7f0000 {
+			label = "Data3G";
+			reg = <0x7f0000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x680000>;
+		};
+	};
+
+	ethernet@10100000 {
+		mtd-mac-address = <&factory 0x28>;
+	};
+
+	esw@10110000 {
+		mediatek,portmap = <0x2f>;
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	otg@101c0000 {
+		status = "okay";
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index f5e8e58ef9..e85c57470b 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -631,6 +631,8 @@ Image/Build/Profile/NBG-419N=$(call BuildFirmware/Default4M/$(1),$(1),nbg-419n,N
 
 Image/Build/Profile/MZKW300NH2=$(call BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000)
 
+Image/Build/Profile/MZKWDPR=$(call BuildFirmware/Default8M/$(1),$(1),mzk-wdpr,MZK-WDPR)
+
 Image/Build/Profile/NCS601W=$(call BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)
 
 nw718_mtd_size=3801088
@@ -817,6 +819,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/MPRA1,$(1))
 	$(call Image/Build/Profile/MPRA2,$(1))
 	$(call Image/Build/Profile/MZKW300NH2,$(1))
+	$(call Image/Build/Profile/MZKWDPR,$(1))
 	$(call Image/Build/Profile/NBG-419N,$(1))
 	$(call Image/Build/Profile/NCS601W,$(1))
 	$(call Image/Build/Profile/NW718,$(1))