From: blogic Date: Thu, 30 May 2013 16:00:50 +0000 (+0000) Subject: lantiq: DGN3500 support X-Git-Url: https://git.archive.openwrt.org/?p=openwrt.git;a=commitdiff_plain;h=da1db11379e005e58980d627553ca739c6b383d9 lantiq: DGN3500 support This requires all the preceding patches and finishes support for the DGN3500, also removing an obsolete file. Signed-off-by: Daniel Gimpelevich git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36781 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network index 06390a73d9..a48fc684db 100755 --- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network +++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network @@ -72,6 +72,11 @@ WBMR) VG3503J) ucidef_set_interface_lan 'eth0 eth1' ;; +DGN3500*) + ucidef_set_interface_lan "eth0.1" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t" + ;; esac [ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload" diff --git a/target/linux/lantiq/base-files/lib/preinit/42_athfix b/target/linux/lantiq/base-files/lib/preinit/42_athfix deleted file mode 100644 index d182fbf340..0000000000 --- a/target/linux/lantiq/base-files/lib/preinit/42_athfix +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh - -. /lib/functions/lantiq.sh - -init_atheeprom() { - local board=$(lantiq_board_name) - case $board in - "Netgear DGN3500B") - echo "- loading eeprom -" - dd if=/dev/mtd2 of=/sys/firmware/ath_eeprom bs=1k skip=60 count=4 - echo 0 > /sys/bus/pci/slots/0000\:00\:0e.0/power - sleep 1 - echo 1 > /sys/bus/pci/rescan - ;; - esac -} - -boot_hook_add preinit_essential init_atheeprom - diff --git a/target/linux/lantiq/dts/DGN3500.dtsi b/target/linux/lantiq/dts/DGN3500.dtsi index 795e8bce0a..75839d253f 100644 --- a/target/linux/lantiq/dts/DGN3500.dtsi +++ b/target/linux/lantiq/dts/DGN3500.dtsi @@ -2,7 +2,7 @@ / { chosen { - bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; + bootargs-append = "console=ttyLTQ0,115200 init=/etc/preinit"; }; memory@0 { @@ -99,7 +99,7 @@ read-only; }; - partition@20000 { + ath9k_cal: partition@20000 { reg = <0x20000 0x10000>; label = "calibration"; read-only; @@ -112,6 +112,13 @@ }; }; + ath9k_eep { + compatible = "ath9k,eeprom"; + ath,eep-flash = <&ath9k_cal 0xf000>; + ath,pci-slot = <14>; + ath,eep-swap; + }; + rtl8366rb { compatible = "rtl8366rb"; gpio-sda = <&gpio 35 0>; @@ -144,7 +151,7 @@ gpio-leds { compatible = "gpio-leds"; internet { - label = "inernet"; + label = "internet"; gpios = <&gpio 2 1>; }; dsl { @@ -158,7 +165,6 @@ power { label = "power"; gpios = <&gpio 34 1>; - default-state = "on"; }; power2 { label = "power2";