From: blogic Date: Fri, 1 Apr 2016 07:11:27 +0000 (+0000) Subject: ar71xx: WNR2200: fix for random WLAN MAC X-Git-Url: https://git.archive.openwrt.org/?p=openwrt.git;a=commitdiff_plain;h=88f32e1f64e63865bf021665906962feb1b6a401 ar71xx: WNR2200: fix for random WLAN MAC Fix for invalid/random/duplicate WLAN MAC address in WNR2200. Permanent platform MAC is calculated and assigned during system startup. WLAN MAC follows wired Ethernet interface addresses. Signed-off-by: Michal Cieslakiewicz git-svn-id: svn://svn.openwrt.org/openwrt/trunk@49100 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c index 5d23f21763..37ffc4c56b 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c @@ -12,6 +12,7 @@ #include #include +#include /* for max() macro */ #include @@ -45,6 +46,7 @@ #define WNR2200_MAC0_OFFSET 0 #define WNR2200_MAC1_OFFSET 6 #define WNR2200_PCIE_CALDATA_OFFSET 0x1000 +#define WNR2200_WMAC_OFFSET 0x108c /* wireless MAC is inside ART */ static struct gpio_led wnr2200_leds_gpio[] __initdata = { { @@ -102,9 +104,40 @@ static struct gpio_led wnr2200_leds_gpio[] __initdata = { } }; +/* + * For WNR2200 ART flash area used for WLAN MAC is usually empty (0xff) + * so ath9k driver uses random MAC instead each time module is loaded. + * OpenWrt's original fix was to copy eth1 address to WLAN interface. + * New solution does not duplicate hardware addresses and is taken from + * WNR2000v3 code. It assigns permanent WLAN MAC equal to ethN's MAC + * plus 1, so network interfaces get sequential addresses. + * If ART wireless MAC address field has been filled by user, use it. + */ +static void __init wnr2200_get_wmac(u8 *wmac_gen_addr, int mac0_art_offset, + int mac1_art_offset, int wmac_art_offset) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *eth0_mac_addr = (u8 *) (art + mac0_art_offset); + u8 *eth1_mac_addr = (u8 *) (art + mac1_art_offset); + u8 *wlan_mac_addr = (u8 *) (art + wmac_art_offset); + + /* only 0xff if all bits are set - address is invalid, empty area */ + if ((wlan_mac_addr[0] & wlan_mac_addr[1] & wlan_mac_addr[2] & + wlan_mac_addr[3] & wlan_mac_addr[4] & wlan_mac_addr[5]) == 0xff) { + memcpy(wmac_gen_addr, eth0_mac_addr, 5); + wmac_gen_addr[5] = max(eth0_mac_addr[5], eth1_mac_addr[5]) + 1; + + /* Avoid potential conflict in case max(0xff,0x00)+1==0x00 */ + if (!wmac_gen_addr[5]) + wmac_gen_addr[5] = 1; + } else + memcpy(wmac_gen_addr, wlan_mac_addr, 6); +} + static void __init wnr2200_setup(void) { u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 wlan_mac_addr[6]; ath79_register_mdio(0, 0x0); @@ -121,8 +154,10 @@ static void __init wnr2200_setup(void) ath79_register_eth(1); ath79_register_m25p80(NULL); - ap91_pci_init(art + WNR2200_PCIE_CALDATA_OFFSET, - art + WNR2200_MAC1_OFFSET); + + wnr2200_get_wmac(wlan_mac_addr, WNR2200_MAC0_OFFSET, + WNR2200_MAC1_OFFSET, WNR2200_WMAC_OFFSET); + ap91_pci_init(art + WNR2200_PCIE_CALDATA_OFFSET, wlan_mac_addr); ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2200_leds_gpio), wnr2200_leds_gpio);