[kernel/2.6.32] refresh patches
authorflorian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Fri, 2 Mar 2012 13:18:47 +0000 (13:18 +0000)
committerflorian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Fri, 2 Mar 2012 13:18:47 +0000 (13:18 +0000)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30777 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/generic/patches-2.6.32/066-block2mtd_probe.patch
target/linux/generic/patches-2.6.32/660-phy_mvswitch.patch
target/linux/generic/patches-2.6.32/670-phy_ip175c.patch
target/linux/generic/patches-2.6.32/680-phy_ar8216.patch
target/linux/generic/patches-2.6.32/690-phy_rtl8306.patch
target/linux/generic/patches-2.6.32/691-phy_rtl8366.patch
target/linux/generic/patches-2.6.32/975-ssb_update.patch

index b9130a4..a97b74e 100644 (file)
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/devices/block2mtd.c
 +++ b/drivers/mtd/devices/block2mtd.c
-@@ -264,10 +264,12 @@ static int _open_bdev(struct block2mtd_d
+@@ -264,11 +264,13 @@ static int _open_bdev(struct block2mtd_d
        bdev = open_bdev_exclusive(dev->devname, FMODE_READ|FMODE_WRITE, NULL);
  #ifndef MODULE
        if (IS_ERR(bdev)) {
@@ -9,8 +9,9 @@
                /* We might not have rootfs mounted at this point. Try
                   to resolve the device name by other means. */
  
-+              wait_for_device_probe();
 -              dev_t devt = name_to_dev_t(dev->devname);
++              wait_for_device_probe();
 +              devt = name_to_dev_t(dev->devname);
                if (devt) {
                        bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
+               }
index 36551fd..c32b087 100644 (file)
@@ -1,8 +1,8 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -99,6 +99,9 @@ config ADM6996_PHY
-       ---help---
-         Currently supports the ADM6996F switch
+@@ -101,6 +101,9 @@ config ADM6996_PHY
+         Currently supports the ADM6996FC and ADM6996M switches.
+         Support for FC is very limited.
  
 +config MVSWITCH_PHY
 +      tristate "Driver for Marvell 88E6060 switches"
index a9452b3..6bd8704 100644 (file)
@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -102,6 +102,10 @@ config ADM6996_PHY
+@@ -104,6 +104,10 @@ config ADM6996_PHY
  config MVSWITCH_PHY
        tristate "Driver for Marvell 88E6060 switches"
  
index 0566600..afda536 100644 (file)
@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -106,6 +106,10 @@ config IP17XX_PHY
+@@ -108,6 +108,10 @@ config IP17XX_PHY
        tristate "Driver for IC+ IP17xx switches"
        select SWCONFIG
  
index 36ce9df..07238ab 100644 (file)
@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -110,6 +110,10 @@ config AR8216_PHY
+@@ -112,6 +112,10 @@ config AR8216_PHY
        tristate "Driver for Atheros AR8216 switches"
        select SWCONFIG
  
index 5605091..8bf7835 100644 (file)
@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -141,4 +141,29 @@ config MDIO_GPIO
+@@ -143,4 +143,29 @@ config MDIO_GPIO
          To compile this driver as a module, choose M here: the module
          will be called mdio-gpio.
  
index 4d4d608..0564fa3 100644 (file)
        u32 pmucap;
  
        if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
-@@ -509,15 +518,12 @@ void ssb_pmu_init(struct ssb_chipcommon 
+@@ -509,15 +518,12 @@ void ssb_pmu_init(struct ssb_chipcommon
        ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
                    cc->pmu.rev, pmucap);
  
        /* TODO - get remaining rev 8 stuff needed */
  }
  
-@@ -572,37 +682,34 @@ static int sprom_extract(struct ssb_bus 
+@@ -572,37 +682,34 @@ static int sprom_extract(struct ssb_bus
        ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
        memset(out->et0mac, 0xFF, 6);           /* preset et0 and et1 mac */
        memset(out->et1mac, 0xFF, 6);
        }
  
        if (out->boardflags_lo == 0xFFFF)
-@@ -616,15 +723,14 @@ static int sprom_extract(struct ssb_bus 
+@@ -616,15 +723,14 @@ static int sprom_extract(struct ssb_bus
  static int ssb_pci_sprom_get(struct ssb_bus *bus,
                             struct ssb_sprom *sprom)
  {
  
  /* Suspend a SSB bus.
   * Call this from the parent bus suspend routine. */
-@@ -667,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct 
+@@ -667,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct
   * Otherwise static always-on powercontrol will be used. */
  extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);