ar8216: remove superfluous code from ar8216_config_init

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35562 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c
index b179117..811e406 100644 (file)
--- a/target/linux/generic/files/drivers/net/phy/ar8216.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.c
@@ -1861,18 +1861,6 @@ ar8216_config_init(struct phy_device *phydev)
 
        if (phydev->addr != 0) {
                if (chip_is_ar8316(priv)) {
 
        if (phydev->addr != 0) {
                if (chip_is_ar8316(priv)) {

-                       /* check if we're attaching to the switch twice */
-                       phydev = phydev->bus->phy_map[0];
-                       if (!phydev)
-                               return 0;
-
-                       /* switch device has not been initialized, reuse priv */
-                       if (!phydev->priv) {
-                               priv->port4_phy = true;
-                               priv->dev.ports = (AR8216_NUM_PORTS - 1);
-                               return 0;
-                       }
-

                        /* switch device has been initialized, reinit */
                        priv->dev.ports = (AR8216_NUM_PORTS - 1);
                        priv->initialized = false;
                        /* switch device has been initialized, reinit */
                        priv->dev.ports = (AR8216_NUM_PORTS - 1);
                        priv->initialized = false;