#
menuconfig PREINITOPT
- bool "Preinit configuration options" if IMAGEOPT
- default n
- help
- These options are used to control the environment used to initialize
- the system before running init (which typically mean /sbin/init which
- switches to multiuser mode).
+ bool "Preinit configuration options" if IMAGEOPT
+ default n
+ help
+ These options are used to control the environment used to initialize
+ the system before running init (which typically mean /sbin/init which
+ switches to multiuser mode).
config TARGET_PREINIT_SUPPRESS_STDERR
- bool "Suppress stderr messages during preinit" if PREINITOPT
- default y
- help
- Sends stderr to null during preinit. This is the default behaviour
- in previous versions of OpenWRT. This also prevents init process
- itself from displaying stderr, however processes launched by init
- in multiuser through inittab will use the current terminal (e.g.
- the ash shell launched by inittab will display stderr). That's
- the same behaviour as seen in previous version of OpenWRT.
+ bool "Suppress stderr messages during preinit" if PREINITOPT
+ default y
+ help
+ Sends stderr to null during preinit. This is the default behaviour
+ in previous versions of OpenWRT. This also prevents init process
+ itself from displaying stderr, however processes launched by init
+ in multiuser through inittab will use the current terminal (e.g.
+ the ash shell launched by inittab will display stderr). That's
+ the same behaviour as seen in previous version of OpenWRT.
config TARGET_PREINIT_TIMEOUT
- int
- prompt "Failsafe wait timeout" if PREINITOPT
- default 2
- help
+ int
+ prompt "Failsafe wait timeout" if PREINITOPT
+ default 2
+ help
How long to wait for failsafe mode to be entered before
continuing with a regular boot if failsafe not selected.
-
+
config TARGET_PREINIT_SHOW_NETMSG
bool
prompt "Show all preinit network messages" if PREINITOPT
if the architecture doesn't define an interface, and there is no
'Preinit network interface' defined, then no messages will be
emitted, even if this is set.
-
+
config TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG
bool
prompt "Suppress network message indicating failsafe" if PREINITOPT
(via netmsg).
config TARGET_PREINIT_IFNAME
- string
- prompt "Preinit network interface" if PREINITOPT
- default ""
- help
+ string
+ prompt "Preinit network interface" if PREINITOPT
+ default ""
+ help
Interface for sending preinit messages to network, and any other
default networking in failsafe or preinit. If empty
uses $ifname (if defined in /etc/preinit.arch).
config TARGET_PREINIT_IP
- string
- prompt "IP address for preinit network messages" if PREINITOPT
- default "192.168.1.1"
- help
- IP address used to configure interface for preinit network
- messages, including failsafe messages
+ string
+ prompt "IP address for preinit network messages" if PREINITOPT
+ default "192.168.1.1"
+ help
+ IP address used to configure interface for preinit network
+ messages, including failsafe messages
config TARGET_PREINIT_NETMASK
- string
- prompt "Netmask for preinit network messages" if PREINITOPT
- default "255.255.255.0"
- help
- Netmask used to configure interface for preinit network
+ string
+ prompt "Netmask for preinit network messages" if PREINITOPT
+ default "255.255.255.0"
+ help
+ Netmask used to configure interface for preinit network
messages, including failsafes messages
config TARGET_PREINIT_BROADCAST
- string
- prompt "Broadcast address for preinit network messages" if PREINITOPT
- default "192.168.1.255"
- help
+ string
+ prompt "Broadcast address for preinit network messages" if PREINITOPT
+ default "192.168.1.255"
+ help
Broadcast address to which to send preinit network messages, as
as failsafe messages
menuconfig INITOPT
- bool "Init configuration options" if IMAGEOPT
- default n
- help
- These option choose the command that will run as the 'init' command
- (that is which is responsible for controlling the system once preinit
- transfers control to it) as well as some options controlling its
- behaviour. Normally init is /sbin/init.
-
- config TARGET_INIT_PATH
- string
- prompt "PATH for regular boot" if INITOPT
- default "/bin:/sbin:/usr/bin:/usr/sbin"
- help
- Default PATH used during normal operation
-
- config TARGET_INIT_ENV
- string
- prompt "Environment variables to set when starting init (start with none)" if INITOPT
- default ""
- help
- Should be a space seperated list of variable assignments. These
- variables will be present in the environment. Spaces may not be
- present (including through expansion) even in a quoted string
- (env doesn't understanding quoting).
-
- config TARGET_INIT_CMD
- string
- prompt "Init command" if INITOPT
- default "/sbin/init"
- help
- The executable to run as the init process. Is 'exec'd by
- preinit (which is the init that the kernel launches on boot).
-
- config TARGET_INIT_SUPPRESS_STDERR
- bool
- prompt "Suppress stderr messages of init" if INITOPT
- default y
+ bool "Init configuration options" if IMAGEOPT
+ default n
help
- Prevents showing stderr messages for init command if not already
- suppressed during preinit. This is the default behaviour in
- previous versions of OpenWRT. Removing this does nothing if
- stderr is suppressed during preinit (which is the default).
+ These option choose the command that will run as the 'init' command
+ (that is which is responsible for controlling the system once preinit
+ transfers control to it) as well as some options controlling its
+ behaviour. Normally init is /sbin/init.
+
+ config TARGET_INIT_PATH
+ string
+ prompt "PATH for regular boot" if INITOPT
+ default "/bin:/sbin:/usr/bin:/usr/sbin"
+ help
+ Default PATH used during normal operation
+
+ config TARGET_INIT_ENV
+ string
+ prompt "Environment variables to set when starting init (start with none)" if INITOPT
+ default ""
+ help
+ Should be a space seperated list of variable assignments. These
+ variables will be present in the environment. Spaces may not be
+ present (including through expansion) even in a quoted string
+ (env doesn't understanding quoting).
+
+ config TARGET_INIT_CMD
+ string
+ prompt "Init command" if INITOPT
+ default "/sbin/init"
+ help
+ The executable to run as the init process. Is 'exec'd by
+ preinit (which is the init that the kernel launches on boot).
+
+ config TARGET_INIT_SUPPRESS_STDERR
+ bool
+ prompt "Suppress stderr messages of init" if INITOPT
+ default y
+ help
+ Prevents showing stderr messages for init command if not already
+ suppressed during preinit. This is the default behaviour in
+ previous versions of OpenWRT. Removing this does nothing if
+ stderr is suppressed during preinit (which is the default).
menuconfig VERSIONOPT
- bool "Version configuration options" if IMAGEOPT
- default n
- help
+ bool "Version configuration options" if IMAGEOPT
+ default n
+ help
These options allow to override the version information embedded in
- the /etc/openwrt_version, /etc/openwrt_release, /etc/banner and
+ the /etc/openwrt_version, /etc/openwrt_release, /etc/banner and
/etc/opkg.conf files. Usually there is no need to set these, but
they're useful for release builds or custom OpenWrt redistributions
that should carry custom version tags.
This is the release codename embedded in the image.
If unspecified, it defaults to the name of source branch.
- config VERSION_NUMBER
- string
- prompt "Release version number" if VERSIONOPT
+ config VERSION_NUMBER
+ string
+ prompt "Release version number" if VERSIONOPT
help
This is the release version number embedded in the image.
If unspecified, it defaults to the svn or git-svn revision
projects / openwrt.git / commitdiff