ramips: make built-in switch transparent for ALL0256N and ALL5002

This allows them to transparently communicate with an external VLAN switch.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33305 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index d20b60a..76c6901 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -42,7 +42,10 @@ ramips_setup_interfaces()
 
        case $board in
        all0256n | \
-       all5002 | \
+       all5002)
+               ucidef_set_interface_lan "eth0"
+               ;;
+
        dir-615-h1 | \
        wl-330n)
                ucidef_set_interface_lan "eth0.1"

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all0256n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all0256n.c
index d30300e..7f5e00b 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all0256n.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all0256n.c
@@ -75,7 +75,7 @@ static void __init all0256n_init(void)
        rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
        rt305x_register_spi(all0256n_spi_slave_info,
                            ARRAY_SIZE(all0256n_spi_slave_info));
-       rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
+       rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE;
        rt305x_register_ethernet();
        ramips_register_gpio_leds(-1, ARRAY_SIZE(all0256n_leds_gpio),
                                  all0256n_leds_gpio);

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all5002.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all5002.c
index e9d1f41..151671a 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all5002.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all5002.c
@@ -50,7 +50,7 @@ static void __init all5002_init(void)
        rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
        rt305x_register_spi(all5002_spi_slave_info,
                            ARRAY_SIZE(all5002_spi_slave_info));
-       rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
+       rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE;
        rt305x_register_ethernet();
        rt305x_register_wifi();
        rt305x_register_wdt();